Thank you for watching! If you would like to build and customize your own dream desk, here are some discount codes: “24BDYTB50” for extra $50 off on E7 PLUS "24BDYTB30" for extra $30 off the E7, E7 Pro and E7L US: bit.ly/3xJyeBs CA: bit.ly/3Ubwokx
Really nice video! love 3d printing for custom cable management. It just looks so much cleaner :) One thing I can definitely recommend is putting a light directly behind the monitor. It gives a super nice glow
Thank you, @arne.Bornheim! It definitely is much cleaner now compared to my chaotic mess I had before lol. Also, thank you for the tip! I'm going to switch the lights to the back of my monitor when I get a chance. 👌
@@kevbot. another idea for a cleaner desk (not sure if this works for you setup) I have my pc mounted underneath the table. Frees up a lot more space on the desk itself
I use the clear double sided gorilla tape and it's worked great for me. You really have to work to get it off but it doesn't damage anything which is great. Thanks for watching!
Hi, very inspirational video. Really enjoyed it. I was curious though where you found the files for the drawers you mounted under the desk? I have some other drawer files for mine, but I like the one's you are using here much better.
Thank you, I'm glad you enjoyed it! I actually designed the drawers myself. I would like to make a version 2.0, though, because they don't have a stopper, so if you pull the drawer to much, it will come off the tracks. Aside from that, they work well. If you want me to send the files to you, just let me know. I'm more than happy to. 👌
@@kevbot. Yes, I would love if you could send me the files, that would be fantastic! ~ I am really enjoying your course, btw. About half-way through it so far.
@@punkerpete That makes me really happy to hear! Thanks for joining the course! I'm going to be updating and adding to the course as well throughout the next couple of months (Depending on the amount of free time I have). What is your email? I'll send the files over to you.
I am new in this channel, do u have a vid of tips to anyone wants to start a modeling and 3d printing journey as a small business ? Or could u make a vid about that topic please ?
@@kevbot. It will be great 😃 And i will check your videos too😁 I am a student and i have a certifications in solidworks and i think it will be great to start 3d printing business
@@kevbot. You will bump it with your knee and it will break and you will print another one in the proper orientation and all will be right and good once again. We're all just humans 🙂
Step one - In a previous Video diss an essentially Industry Standard Piece of Software for demanding a recurring yearly fee once *_you_* make money using it. Step two - @04:34 Can't even orient a simple Part they - to add insult to injury - designed themselves for proper part strength / layer line orientation. Hilarious 🤣
@@kevbot. Ok, Just FYI i reported many films to YT, about probably crypto scam. That was about 2024.01. Currently, all ads/films/channels has been removed - i can't find any. I also checked my reports to YT. That was many similar channel with probably your face - i am not 100%, but maybe someone stolen your face and generated scam using AI.
@@kevbot. Ok, Just FYI i reported many films to YT, about probably crypto scam. That was about 2024.01. Currently, all ads/films/channels has been removed - i can't find any. I also checked my reports to YT. That was many similar channel with probably your face - i am not 100%, but maybe someone stolen your face and generated scam using AI.
@@kevbot. Ok, Just FYI i reported many films to YT, about probably scam. That was about 2024.01. Currently, all ads/films/channels has been removed - i can't find any. I also checked my reports to YT. That was many similar channel with probably your face - i am not 100%, but maybe someone stolen your face and generated this ads using AI.
Thank you for watching! If you would like to build and customize your own dream desk, here are some discount codes:
“24BDYTB50” for extra $50 off on E7 PLUS
"24BDYTB30" for extra $30 off the E7, E7 Pro and E7L
US: bit.ly/3xJyeBs
CA: bit.ly/3Ubwokx
Your videos' quality is so good. I'm genuinely so surprised that you don't have hundreds of thousands of subs. Keep up the great work.
Thank you for the kind words! It means a lot!
Really nice video! love 3d printing for custom cable management. It just looks so much cleaner :)
One thing I can definitely recommend is putting a light directly behind the monitor. It gives a super nice glow
Thank you, @arne.Bornheim! It definitely is much cleaner now compared to my chaotic mess I had before lol. Also, thank you for the tip! I'm going to switch the lights to the back of my monitor when I get a chance. 👌
@@kevbot. another idea for a cleaner desk (not sure if this works for you setup) I have my pc mounted underneath the table. Frees up a lot more space on the desk itself
Everything came out very nice!! That's a huge upgrade to me. Keep it going!
Thank you!
Amazing video! I love how you make your own stuff and make it creative. Its very entertaining and fun to watch! This inspires me a lot:)
Thank you so much!
What double sided tape do you use as mine always falls off after a short time ? Thks great vid
I use the clear double sided gorilla tape and it's worked great for me. You really have to work to get it off but it doesn't damage anything which is great. Thanks for watching!
Super clean setup! Now you just need a cool desk figurine to sit under your monitor
Thank you! I definitely need a figurine but the question is, what figurine should I choose 😄
@@kevbot. OSRS 3D Print 😉would be happy to send you one ❤
Nice clean setup and glad you got a great sponsor!
Thank you!
Cool video idea. Hope it goes off
Thank you! I appreciate that!
Hi, very inspirational video. Really enjoyed it. I was curious though where you found the files for the drawers you mounted under the desk? I have some other drawer files for mine, but I like the one's you are using here much better.
Thank you, I'm glad you enjoyed it! I actually designed the drawers myself. I would like to make a version 2.0, though, because they don't have a stopper, so if you pull the drawer to much, it will come off the tracks. Aside from that, they work well. If you want me to send the files to you, just let me know. I'm more than happy to. 👌
@@kevbot. Yes, I would love if you could send me the files, that would be fantastic! ~ I am really enjoying your course, btw. About half-way through it so far.
@@punkerpete That makes me really happy to hear! Thanks for joining the course! I'm going to be updating and adding to the course as well throughout the next couple of months (Depending on the amount of free time I have). What is your email? I'll send the files over to you.
@@kevbot. Thanks so much! I sent a message to your contact.kevbot email.
I am new in this channel, do u have a vid of tips to anyone wants to start a modeling and 3d printing journey as a small business ? Or could u make a vid about that topic please ?
I do sort of have some older videos on that but I'm definitely going to make some new ones. Thanks for the suggestion!
@@kevbot. It will be great 😃
And i will check your videos too😁
I am a student and i have a certifications in solidworks and i think it will be great to start 3d printing business
Hey there, what is the tape brand you're using?
Nevermind! Just noticd your comment to another person!
Double sided Gorilla tape. It works great 👌
Great videos ! Just subbed
Thank you!
so u needed a new table to put the pc up, ??? im confused.
Yeah, it wouldn't fit on my old desk because it was too small.
Bro, you printed that headphone hanger hook in the wrong orientation. When it breaks because it split at one of the layer lines... you'll understand.
True, it would be stronger printed the other way, but I'm not worried about it breaking. The headphones weigh less than a pound.
@@kevbot. You will bump it with your knee and it will break and you will print another one in the proper orientation and all will be right and good once again. We're all just humans 🙂
What is this 3D maker program?
Seems like Plasticity3D
Plasticity
I'm pretty sure I heard your PC say "thank you" when you got it off the carpet...
I think I heard that too lol 😄
First?
Love the content btw
Thank you! ❤
Dat GPU sag, though!!!
Lol I use a zip tie to keep it from sagging more !
Step one - In a previous Video diss an essentially Industry Standard Piece of Software for demanding a recurring yearly fee once *_you_* make money using it.
Step two - @04:34 Can't even orient a simple Part they - to add insult to injury - designed themselves for proper part strength / layer line orientation.
Hilarious 🤣
It was more than just the price and it's hilarious you think you need "proper part strength" to hold up headphones that weigh less than a pound. Lol
Did you crete this stupid ads on youtube about crypto?
Ads about crypto? No.
@@kevbot. Ok, Just FYI i reported many films to YT, about probably crypto scam. That was about 2024.01. Currently, all ads/films/channels has been removed - i can't find any. I also checked my reports to YT. That was many similar channel with probably your face - i am not 100%, but maybe someone stolen your face and generated scam using AI.
@@kevbot. Ok, Just FYI i reported many films to YT, about probably crypto scam. That was about 2024.01. Currently, all ads/films/channels has been removed - i can't find any. I also checked my reports to YT. That was many similar channel with probably your face - i am not 100%, but maybe someone stolen your face and generated scam using AI.
@@kevbot. Ok, Just FYI i reported many films to YT, about probably scam. That was about 2024.01. Currently, all ads/films/channels has been removed - i can't find any. I also checked my reports to YT. That was many similar channel with probably your face - i am not 100%, but maybe someone stolen your face and generated this ads using AI.
@kevbot. What is very strange is that all these films/ads had the phrase 'MEV BOT' in the title.