Thank you. Very informative video. I have a question .. After setting up and connecting the device , does it need to be connected to the router using a cable or could the cable be removed and connected wirelessly. Thanks
My camera is plugged in and it won’t show images in monitor now then when I press on quick set it connects and it conflicts turning some off even if dhcp is on or off help it was working perfectly for 3 years
Yes sure, with Sannce Vision App you can access your cameras and the whole system from anywhere in the world once you connect your DVR recorder to your Internet router.
@@engineerityourself123 hello, what about if we want to see the cameras on a desktop computer? Is there an app for that? My NVR came with CMS software for PCs but it's impossible to set it up to view on different networks
@@eduardoalanis6531 I have not use it myself but i found this for you, and i hope it will help you to set it up. please see link below: support.sannce.com/hc/en-us/articles/900000422223-Sannce-Home-How-to-View-the-Cameras-on-the-Computer-via-the-Software-Guarding-Vision-
@@hoyedakhatun7271 I am not near my device now but startup wizard will display the QR for you. Then you just need to go to your mobile app and press add device, then scan this QR from the screen into your phone, and that should add the device to your phone. Try that and let me know. Thanks
@@engineerityourself123 yes after start up wizard I'm not sure what to press but it doesn't display the QR code by just pressing start up wizard...thank you
This thing is my nightmare ..i cant get past the stock admin passcode the app. Cannot scan the QR code either.. this is what i get for buying a cheapo.i have both camera hooked up to my RV camera.
@Moto Miles try to restore to factory settings if possible....check this link might help support.sannce.com/hc/en-us/articles/900000435283-Type-2-What-to-do-if-you-forgot-the-admin-password-of-system-
There was no need for the video to be so Long, but thanks for the information. 👍🏽
Very good and clear video
Thanks so much
Thank you. Very informative video. I have a question .. After setting up and connecting the device , does it need to be connected to the router using a cable or could the cable be removed and connected wirelessly. Thanks
This DVR does not have a wireless card. Therefore, you would need to leave it connected via the cable.
My camera is plugged in and it won’t show images in monitor now then when I press on quick set it connects and it conflicts turning some off even if dhcp is on or off help it was working perfectly for 3 years
Is there anything settings between NVR and internet before it will connect it
Can this run through hotspot
How can I record via my phone? And how can I add more cameras
How do I replay video from the sannce system
Sir I have a question. Is there a way to see my camera when im in another place with different wifi?
Yes sure, with Sannce Vision App you can access your cameras and the whole system from anywhere in the world once you connect your DVR recorder to your Internet router.
@@engineerityourself123 hello, what about if we want to see the cameras on a desktop computer? Is there an app for that? My NVR came with CMS software for PCs but it's impossible to set it up to view on different networks
@@eduardoalanis6531 I have not use it myself but i found this for you, and i hope it will help you to set it up. please see link below:
support.sannce.com/hc/en-us/articles/900000422223-Sannce-Home-How-to-View-the-Cameras-on-the-Computer-via-the-Software-Guarding-Vision-
Thank you, I really appreciate it. Awesome feedback.
Can you please advise me where I will find the QR code the app is t working on my phone anymore so I installed it on a new phone
Please go to Startup Wizard from the menu and you will find it there. I hope that helps.
@@engineerityourself123 can you guide me step by step please I know where the step up wizard is it's what I press afterwards thank you
@@hoyedakhatun7271 I am not near my device now but startup wizard will display the QR for you. Then you just need to go to your mobile app and press add device, then scan this QR from the screen into your phone, and that should add the device to your phone. Try that and let me know. Thanks
@@engineerityourself123 yes after start up wizard I'm not sure what to press but it doesn't display the QR code by just pressing start up wizard...thank you
My sannce NVR not picking up my network it ok gateway but the network error
I hope someone with NVR system can help to answer your question.
I don't have a "guide" in my menu, how do I do it?
Watch the video.
Why when I try to on camera then again asking me about device password and login ?
This thing is my nightmare ..i cant get past the stock admin passcode the app. Cannot scan the QR code either.. this is what i get for buying a cheapo.i have both camera hooked up to my RV camera.
You need to accept blank pass code first, then create your own after that when prompt. I hope that helps.
Thanks 🙏 that’s not working though it gives me questions to unlock that I never set up .
@Moto Miles try to restore to factory settings if possible....check this link might help
support.sannce.com/hc/en-us/articles/900000435283-Type-2-What-to-do-if-you-forgot-the-admin-password-of-system-
Thanks 🙏 I’ll give it a try
Do you speak Spanish?
No, sorry.
It says device offline :/ its connected to internet and everything
Try with new Internet cable.