Just got mine, noticed the grinding, so immediatly looks it up, and here we are. Thanks, this means alot to me, i expected a smoother bolt in this price range, but was kinda dissapointed, then again, this is very simple fix. Thank you!!
the replacements for the m lock covers are 3d printed right? Where can we get them? the one's you sell on your site are different ...i like those more!
I have an Echo 1 VSR-10 and I did what you said and such, but my bolt pull is still tough, what else could I do. Or did I do it wrong, if not maybe sand it down a bit more.
Been looking for a solution to this problem, bought a bottom end sniper and the bolt is pretty rough to pull back, and it’s only my 2nd gun so a bit apprehensive about taking it apart.
check with the manufacturer about the warranty, if its voided or not when disassambled. if not, then try it. If you are still unsure, you can always try a little bit of lubricant first.
Hey Silo not sure if you even look at comments on videos this old but I bought a used SSG24 with the Novritsch scope off of hop up, and I've noticed that when I adjust the knobs on the scope, I notice almost zero movement on the crosshair, even at the lowest magnification. Is there any way I can take apart the scope and tell for sure if its busted or not? It makes the clicks when adjusted I just notice no difference. This is my first airsoft gun that uses a scope like this however so I'm not sure if what I'm experiencing is normal.
I don't understand how is such a stiff spring cocked with the bolt that easily? The spring is so hard to pull or compress with my bare hands why is it so easy when its in the gun? What did that bolt actually do? How does it manage to compress that spring??
Any tip for a slam firing vsr 10 due to the spring guide not holding. Mine has very little wear and yet it still slams, I changed the piston and it still slams. No idea how to fix without buying new trigger or guide.
In my ssg10 the spring guide was grinding on the cylinder when cocked. So I Sand down the back plate diameter of the spring guide a little, around 0,75mm. Now there is enough space.
My dad tried to do this to my airsoft sniper, he took it all apart like even more then this (EVERYTHING) then he broke a few parts and welp that was a waste of £209 out of my own money
Thankyou So Much for taking a 10min video and turning into 1 minute. Time is money!
Just got mine, noticed the grinding, so immediatly looks it up, and here we are. Thanks, this means alot to me, i expected a smoother bolt in this price range, but was kinda dissapointed, then again, this is very simple fix.
Thank you!!
The best part was your little bunny
And you have a cat too they are both so cute
Anyone else just watch his rabbit the entire vid.
Yeah
Spring guide = spring guide stopper lulz
Silo can you do DAYZ again? Cause I liked it a lot!
@@chrisbateman957 I think he did some on his 2nd channel... Or was it twitch? Oh well...
Silo ik ben Nederlands! :)
Holy! This was 100% what I needed. I did this to a Ares Striker with 600 grit wet sand paper and the bolt pull isses went away. Thank you!
Man my Cyma 702 its really cool and easy to manufacturing
how'd u smooth the bolt pull? mines still got friction
Should I put the thin copper on the silver part on the outer surface of the loading cylinder again?
Nice,You Made That Kind Od Video When I Was Looking For It.
0:19 r a b b i t
I know it wasn't out yet at the time of the video, but does this work with the SSG96?
yo silo, im planing on becoming a sniper like u, could u do a video showing good strategies and skills needed for sniping?
The rabbit is cute!
the replacements for the m lock covers are 3d printed right?
Where can we get them?
the one's you sell on your site are different ...i like those more!
I have an Echo 1 VSR-10 and I did what you said and such, but my bolt pull is still tough, what else could I do. Or did I do it wrong, if not maybe sand it down a bit more.
Piston. I hear 90 degree ones give that majorly comfy pull
Awesome video Chat remember to clean of the shavings 😊
How fine should the sandpaper be?
Buttery smooth bolt pull=loads of silicone spray on cylinder 😂
Thats my favorite gun
It would be really cool if you played some games you’ve previously played on t is channel 😊
Mine scratches so much thx so much
What size grit sand paper did you use?
Been looking for a solution to this problem, bought a bottom end sniper and the bolt is pretty rough to pull back, and it’s only my 2nd gun so a bit apprehensive about taking it apart.
check with the manufacturer about the warranty, if its voided or not when disassambled. if not, then try it. If you are still unsure, you can always try a little bit of lubricant first.
In my opinion that is my favorite gun
What is the m165 spring bullet speed?
Hey Silo not sure if you even look at comments on videos this old but I bought a used SSG24 with the Novritsch scope off of hop up, and I've noticed that when I adjust the knobs on the scope, I notice almost zero movement on the crosshair, even at the lowest magnification. Is there any way I can take apart the scope and tell for sure if its busted or not? It makes the clicks when adjusted I just notice no difference.
This is my first airsoft gun that uses a scope like this however so I'm not sure if what I'm experiencing is normal.
You're not going to see the crosshairs actually move. You need to shoot again to check zero.
What grain sand paper did you use is it possible too damage it
It would be nice if you try to rock an M4A1-S Golden Coil in a Airsoft Match
what spring does he use?
how can he rack it like there is no spring inside
Class bro 👍🔥
Would that void the warranty do you think?
Does warranty matter to you?
I don't understand how is such a stiff spring cocked with the bolt that easily? The spring is so hard to pull or compress with my bare hands why is it so easy when its in the gun? What did that bolt actually do? How does it manage to compress that spring??
Leverage
Mine is even scratchier after i have done that...
Help
Because u did not clean the shavings
Good gun I love that
Don't forget good guide ring fitment.
The bunny 🐰
What grit sandpaper?
New video yes 🙉
If you add graphite powder in there it will also help.
I don’t even have a sniper but I like the vid.
Meet the sniper
Incroyable.
Did you se that Bunny
Any tip for a slam firing vsr 10 due to the spring guide not holding. Mine has very little wear and yet it still slams, I changed the piston and it still slams. No idea how to fix without buying new trigger or guide.
Make sure the spring guide stopper is in the proper position and the triggerbox screw threads are not worn.
Also make sure the seir is not wobbly i had a echo m21 and I put electrical tape on the bottom of the seir and made sure the trigger box was tight
Hello your the best
Well, I got an answer, but not what I was hoping for since none of this is applicable to the srs
Idk it for some reason make mi bolt stuck
What kind of sandpaper did you use?
150 grit
What sand paper grit do you recommend like a very high smooth paper or a medium?
I would go smooth because it is less likely to scratch
Medium to start, fine to finish
Can this be done on a VSR10 clone as well?
@@SuperHans122 Any bolt action
Thanks
0:49 C A T
Buttery smooth 😋
does this reduce fps?
does it decrease your IQ? Yea
What's your Rabbit's name?
Kiwi :)
It didn’t really work for me 😢
My bolt pull is smooth but i cannot push it back smoothly,something grinds really really bad. Pulling is almost always smooth.
In my ssg10 the spring guide was grinding on the cylinder when cocked. So I Sand down the back plate diameter of the spring guide a little, around 0,75mm. Now there is enough space.
Don´t shoot the rabbit...don´t do it 🤣 ...Nice TUT, THX a lot 👍
Colab with swamp sniper
Rabbit wanna join in the fun
Good
He has a bunny
:D
Who where the two people who disliked like bruh
Bruh moment.
cool
My dad tried to do this to my airsoft sniper, he took it all apart like even more then this (EVERYTHING) then he broke a few parts and welp that was a waste of £209 out of my own money
bunny and cat
I eat the cheese
Bunny
T.y
f**k the gun, can i have your rabbit please?
M
You are lying it isn't 5 minute is 1 minute and 17 second
ZaKhoulM if you do this yourself, it would take five minutes.
First
NO ONE CARES DUDE
First
NO ONE CARES
First
Dude no one cares