I finshed my craftsman. Did the same techniques and it worked great. I hooned it off road over a ditch and broke the welded on spindle - If I could do it over again I would strengthen with 2 3/4 inch U bolts on each spindle. The thing could have hit 40 but I only had enough road for 30.
How are you guys getting the higher MPH out of them? And this guys is spinning the tires , which I know it’s on wet grass but still mowers don’t do that.
Nah lmao I did get the Deere though but it just mows my lawn lmao... I actually sold most of my gocarting stuff because my dogshit neighbors were calling the cops on me whenever I'd ride. Dont have a big yard so Id go out in the road and they would call. Really fucked up my whole hobby I was having a ton of fun with it. Hopefully I can own a home one day and not have to listen to anyone..@@richardhead3211
How did you do that with the V-belt because you reversed the gearbox and it should logically drive backwards, what have you rebuilt so that you drive forwards?
Is there a purpose to using a lawnmower as opposed to just building from scratch a regular kart? Or is it just for the swagger of drifting a lawnmower? Either way pretty cool.
Hey one question when you flip the transaxle did you have to change anything it it because it would spin a different way when you flip it like that because I’m building a 111 John Deere I’m lowering it I’m almost done the front but I’m a bit confused on the back
have you ever had those fenders bend into the wheel when you get tossed around in your seat or a turn? Im replicated your build and im at the body work part.
Looks like he has a 3 inch pulley on the rear if you freeze it at 56 seconds. We don't get to see the drive shaft pulley but its probably 7 or 8 inches.
Because the engine is right side up still… along with the torque converter or whatever it uses. It’s not like it changes that at all. It’ll still rotate the tires whichever way regularly. Edit: pretty sure, idk I haven’t watched all the way through
When you flip the differential you just bolt/weld the old brackets so it lines up with drive pulley. And / or if your drive shaft is long enough you can get lucky and adjust your drive pulley downward.
Nice job. I saw your post on Instagram. Had to check out the build. Looks clean
2:26 Top tier editing. The whole video was done super well and fun to watch!
I finshed my craftsman. Did the same techniques and it worked great. I hooned it off road over a ditch and broke the welded on spindle - If I could do it over again I would strengthen with 2 3/4 inch U bolts on each spindle. The thing could have hit 40 but I only had enough road for 30.
How are you guys getting the higher MPH out of them? And this guys is spinning the tires , which I know it’s on wet grass but still mowers don’t do that.
@@bradleyn3334I have done many pulley swaps and never weld the pulleys on the transaxle
Awesome build! Done a outstanding job!
Rear axle is upside down and backward?
Sick build! Do you lock the transaxle bud? It drifts fabulous
How did you keep forward being forward when you flipped the transaxle?
Im going to pick up a Deere 110 tomorrow and I'm totally copying this. I love it.
For sure man 🤘
did you ever do it? we wanna know
Nah lmao I did get the Deere though but it just mows my lawn lmao...
I actually sold most of my gocarting stuff because my dogshit neighbors were calling the cops on me whenever I'd ride.
Dont have a big yard so Id go out in the road and they would call.
Really fucked up my whole hobby I was having a ton of fun with it.
Hopefully I can own a home one day and not have to listen to anyone..@@richardhead3211
Ну что там?
Imagine u look outside ur window and this the only landscapers ur parents could afford
Did you make the right side brake pedal into a gas pedal if so how?
That is alot more organized/simple than what I did
At least it looks like it
That thing is so sick. I’m about to take a racing mower put some old John deere mower panels on there and build kind of the same thing.
NOTHING RUNS LIKE A DEERE. 🦌
That camber tho 😂. Aggressive. Looks like fun
How did you do that with the V-belt because you reversed the gearbox and it should logically drive backwards, what have you rebuilt so that you drive forwards?
Reverse engineering lol
You flip it upside down and then flip it around so the “back” of the trans is the front now
🤦♂️
I love the way it looks! Please, tell me where did you buy it and I will go looking for it immediately!
craigslist is a good place to look and you want to buy one with a manual transmission, hydrostatic will not work.
He built it
Is there a purpose to using a lawnmower as opposed to just building from scratch a regular kart? Or is it just for the swagger of drifting a lawnmower? Either way pretty cool.
How’d you get the shifter hooked up?
How did you get the transformation to lay down and still function with a belt
Idk how I came across to this so early but definitely made my day already
Got you link from ig
That thing rips man awesome work 👏 👌
Thanks man I appreciate it 🤘
Hey one question when you flip the transaxle did you have to change anything it it because it would spin a different way when you flip it like that because I’m building a 111 John Deere I’m lowering it I’m almost done the front but I’m a bit confused on the back
after flipping it, just rotate it 180 so the left wheel is now the right wheel etc.
How did you make the exhaust stack? I'm working on a build of my own and would love to know
Did you change anything in the Gearbox ?
How does your shift linkage work? In the middle of dropping an old mower but am struggling to find ideas for shifter after flipping transaxles
Thats where I ran into problems. I just kept it in 4th ha.
I have a wheel horse in the garage right now..... that I might have to do this with.
have you ever had those fenders bend into the wheel when you get tossed around in your seat or a turn? Im replicated your build and im at the body work part.
SHOW BRE
@mycustomgokart how is the seat and the metal under it secured?
What did you do on its gearing? To get that better bottom end and top speed?
Looks like he has a 3 inch pulley on the rear if you freeze it at 56 seconds. We don't get to see the drive shaft pulley but its probably 7 or 8 inches.
Hes got a 7" pulley on the motor and a 1 1/2" on the transaxle
So many and I'm here for it
Been watching a lot of mower vids. Yours is best lowering job. Looks sick
If you flipped the rear end upside down how did you change the gearing to go forward in drive still?
Because the engine is right side up still… along with the torque converter or whatever it uses. It’s not like it changes that at all. It’ll still rotate the tires whichever way regularly.
Edit: pretty sure, idk I haven’t watched all the way through
ur right it will still spin the right way you wont loose any gears or flip direction@@adairiandunlavy5454
Wie hast du das mit dem Getriebe gemacht? Einfach gedreht? Grüße aus Deutschland
Braydon price music causally plays in the background 0:08
How much did the whole mower costs
What motor are you using
Could you show the belt system?
Looks sick man.. good job..
How did you route the shifter if the trans In flipped
What motor is in it
Hydrostatic ? Did you go with different pulleys to make it rip like that ?
Ya 7in front 2in back
how long of a belt did you use?@@mycustomgokart
2:57 what is the miss the rage song edit name?
What engin you build in it?
I saw your listing on south capital holding! Are you still selling them?
nope never was, it was a scam
bro i need this how much does the jeep and the entire built cost you
Subbed and liked. Love how this thing looks!
how did you increase the speed
if you flipped your rear tranny/diff did you somehow need to change the direction of the belt?
Same question!
Once you flip the dif, rotate it 180’ and it’ll be forward again
Did you use the lawnmower motor in there or is it a different one??
different one 15.5 briggs
How did the pulleys and belt end up in line after you slammed it ?
When you flip the differential you just bolt/weld the old brackets so it lines up with drive pulley. And / or if your drive shaft is long enough you can get lucky and adjust your drive pulley downward.
where did you get your exhaust?
Custom made
from what year is this jonh deere
Do the front wheels have brakes?
Nope
There's no need for brakes
nice mower. Would you make one for me?
Hey man I have this same mower I’m in the middle of trying to lower, how did you do the rear end and where did you put the fuel tank? Lol
put ur battery and ur tank up front u willl need a smaller tank btw
@@ethanearle6403 like in front of the wheel behind the engine?
yeah in ur engine bay u will need a smaller tank and have to make a battery tray@@mikep4916
I NEED HELP WHERE TO BUY A CUSTOM ONE PLS PR GIIDE HPW TO BUILD AND FINL PRICE
Yea seen ya on insta gained a follower on both looks dope bud 👌 👍
So cool!
Che pulegge hai messo?
Loveing it
Song at the end?
From tha back x miss the rage
Is everything stock?(besides your weld stuff)
Ya minus the engine I swapped it for a 15.5 hp
I need one !
How many speeds do you have and what year is it
6 I think
hey i'm about to do the same thing as you and i was wondering if my 5 speed gonna work? do you think?
I have a 111 with the tank under the hood
Yes of course
Do you have the factory engine in it?
Nope it was swapped for a 15.5 Briggs and Stratton
What a beauty 👍🏻🍻🇨🇦
is it possible that i could get your contact info because i want to do something similar but not entirely sure how
Seems so fun
Man i wanna do this to my L130 now 😩👌
Use the stock transaxle?
Ya
Love it
Nice
I have a JD160. Will you build me this ?
I’m building a 160 right now lol
Where did you put the gas tank
on the other side of the battery
and its like the size of a 1q oil container
If you wanna sell it I’m the guy
This thing is so fuckin cool!!!
I want to buy it
👍👍
going to cut my fairing now
Круто!
Now get some nice looking wheels and put then on it
just seen that mover on Tiktok
Looking it
?? Pls
Mow my lawn please
Lawn terror
Can I get it for money
Fs