This reminds me of the Cleetus golf cart series where it ended with everyone almost getting seriously hurt running sport bike motors in them. If it ain’t sketch it ain’t fun 🎉
Chances are it has a peerless 700 trans has shift keys that engage trans those shift keys wear out real fast if shifting on the fly. Re gear that unit so you can run 3rd gear on that track, 3rd should be ur 1 to 1 ratio
Those Kohler motors are awesome, I have a 27hp engine on my mower I use for cutting grass and a vanguard on my mower that I rip around on, the front pulley is huge on your mower and a sick belt to chain drive
JH, if you do sail to England aim to land on our south coast, the life boats are always about, plus you get collected on the beach and put up in a four star hotel, lovely little holiday for you both 😉
Where I'm from we moved on from vuilding mowers that race, to mowers that pull... specifically hundreds of horsepower and stretched frames. Its a great time. 😂😂
Hell yeah man. I was working in an exhaust shop, and one guy had us build him a chrome hood stack exhaust for his, then about 4 more people came in to get their own chrome exhaust setup. Did a couple mild cub cadets, and a pretty wild flathead V8 8n ford tractor. Only tractor I've ever put duals, glass packs and chrome tips on....
This video had me cracking up the whole time, best part was I saw my life flash before my eyes and next clip is him cruising around again, bad Chad better watch where he parks his truck this year
I’ve been on one like those lawn mowers no breaks no a bad clutch no helmet on Tipped over on the road hands got a lot of damage but we headed up so I’m back up and going Those were bad days but the experience and the fun was all worth it
Please get the gas truck back going cause it's way more entertaining to watch cause it sounds good! The diesel truck wasn't near as cool. Awesome video guys!
So for the lawnmower, you need to mok up two twin turbos even though they don’t work still mark them up to make it look like it has to 88 TwinTurbo’s on it and don’t forget to put some Racine flames down the side
Jh, that mower is definitely running out of fuel. We have raced mowers for years and have 15 local and national championships in the last 7 years. It's a whole lot of fun. If it's a new belt, it's either too short or the geometry's all wrong on the clutch pulley. Try and clutch it and hold the brake tight and rev it a bit. That and the gearing is all wrong. I can help you fig it all out. We have some of the most proven and badass chassis in the sport that we designed and build.
You see that's why you built that track for!!🎉🎉 You need another 4 or 5 of a similar build to race with all the boys on Newyears eve with the fire ripping 🔥 away in the middle! 4 wheels may be a little safer than two wheels but it does seem to go pretty quick though however not sure how reliable they are compared to the mini bikes 😂😂
Super cool, I bought a 16.5hp craftsman for $50, threw a Chinese starter at it after swapping the plastic bendex gear for the metal one. Just need a couple spindles, and I’ll be mowing grass in style.
Years back, I had a racing lawn mower. I bought off a friend of mine. His dad raced it for a while but had built a new one. This thing was ridiculous. It had completely stock lawnmower steering but would do every bit of 50 mph. It would rip donuts in the grass and would have a foot long flame coming out of the side pipes. It eventually dropped a valve and trashed the motor, and I got rid of it. It's probably a good thing because I was gonna get hurt on it for sure 😅
That ain't no racing mower in Australia where I am we have lawnmower races and guys put roadbike motors in them some up to 800+ cc 👍🏼👍🏼 dangerous but fun as hell
You could also swap the motor out and put in a Predator 670cc motor in it from harbor freight. It's basically a V Twin motor making 22 HP. These motors are used on almost all new mowers. The Drawback is is it's $1,000 dollars and you'll probably need to fab up some motor mounts. But the power would be insane. 😎👍
@@Boostonabudget oh! I didn't realize it was already a vtwin. That explains the surprising speed. Lol Yeah. Red beards garage bought a whole aftermarket pistons and rods for his. It's insane!
Fox the clutch and brakes and then have a race with cleetus at the FF track, you can also modify the engine and see what it can do on a 1/8 mile at Bradenton.
Had a few of these but eventually gave up as it was becoming to costly at around 1-2k per build with only basic stuff an engine alone could cost you 1k 2nd hand for 20hp (everything costs lots in NZ and you have to adhere to there specific rules if you want to race at the few tracks, Great bunch of people tho) Have fun be safe and enjoy your large market
If you happen to see this on the slim chance, I have a friend in VA selling a racing fuel powered racing mower, it was used for lawn mower pulls, fully built and tuned! Just let me know and I can get you in touch with him
No clutch? Change the belt. The belt is too tight. I raced for 9 years it’s a blast😂 btw jet that carb it’s running out of fuel
yeah it needs a longer belt and a bigger main jet
Yeah
I used to just oil mine fixed the problem for a bit then I'd have to oil it again
I'm sure he's just having fun for a few days then u won't never see it again lol
This reminds me of the Cleetus golf cart series where it ended with everyone almost getting seriously hurt running sport bike motors in them. If it ain’t sketch it ain’t fun 🎉
Hell yeah 👍
You guys should hold a lawnmower race, I'll make the trip from New York with my jet lawnmower.
lol. I'd pay to see that
Now this is a race I wana see at the FF. Everyone has to build a racing mower.
Yee Yee!!
Landscaper drags.
@@TheBlownGSR MONDAY MONDAY MONDAY, AT THE FREEDOM FACTORY, MOWER MADNESS
Good way to un alive the people we like to watch😂
@@isaacboettcher3489 that's quitter talk
JH, your content was always good, even in the early days of the channel, but y'all have made serious gains in your video production too. Killing it!!
Absolutely!!
Everyone needs to get one to race at the new years bonfire
Chances are it has a peerless 700 trans has shift keys that engage trans those shift keys wear out real fast if shifting on the fly. Re gear that unit so you can run 3rd gear on that track, 3rd should be ur 1 to 1 ratio
This is too funny. You guys better armour up. Gonna be some carnage for sure 👀😂
Justin sounded like slingblade when he stopped going around the track on the mower🤣🤣 "this is real fun"🤣🤣
You and Weston have to race now lol. Who's next to get a mower Cleeter? Have a Merry Christmas you guys!!
Those Kohler motors are awesome, I have a 27hp engine on my mower I use for cutting grass and a vanguard on my mower that I rip around on, the front pulley is huge on your mower and a sick belt to chain drive
Slip sliding on the mower looks fun!
ENJOYABLE FOR SURE
JH, if you do sail to England aim to land on our south coast, the life boats are always about, plus you get collected on the beach and put up in a four star hotel, lovely little holiday for you both 😉
I love it each time we get a tour of the "JH Motors" car lot the deals are just jumpin'!
JH and Justin, y'all rock! There's a lawnmower track in my town. They will fly for sure. Merry Christmas, y'all! Peace
Jh and Justin you guys are killing it
Jh watching y go around that track brought us both huge smiles
I feel like JH is probably the most fun boss to work for.
Him and Cleetus both
Where I'm from we moved on from vuilding mowers that race, to mowers that pull... specifically hundreds of horsepower and stretched frames. Its a great time. 😂😂
Hell yeah man. I was working in an exhaust shop, and one guy had us build him a chrome hood stack exhaust for his, then about 4 more people came in to get their own chrome exhaust setup.
Did a couple mild cub cadets, and a pretty wild flathead V8 8n ford tractor.
Only tractor I've ever put duals, glass packs and chrome tips on....
Those lawn mowers look pretty badass when they put motorcycle handle bars on um.
I’m all in on racing mower content !
This video had me cracking up the whole time, best part was I saw my life flash before my eyes and next clip is him cruising around again, bad Chad better watch where he parks his truck this year
That Mower and JH with some cold beverages that could be a bad night or a very good one
Bro!!! I used to go to mower races with my great grandpa in doniphan Missouri! (I bet nobody’s heard of it) haha so sweet! Love from Missouri!!!
I’ve been on one like those lawn mowers no breaks no a bad clutch no helmet on
Tipped over on the road hands got a lot of damage but we headed up so I’m back up and going
Those were bad days but the experience and the fun was all worth it
Definitely my favorite shirts! Nothing like airing out the bags on the 6.0 while wearing my finish your lift shirt 😂
Awesome Thanks for sharing love your Channel Keep up the Amazing Work !!!!
Please get the gas truck back going cause it's way more entertaining to watch cause it sounds good! The diesel truck wasn't near as cool. Awesome video guys!
Y'all need to all do a big mower race!!!
So for the lawnmower, you need to mok up two twin turbos even though they don’t work still mark them up to make it look like it has to 88 TwinTurbo’s on it and don’t forget to put some Racine flames down the side
Jh, that mower is definitely running out of fuel. We have raced mowers for years and have 15 local and national championships in the last 7 years. It's a whole lot of fun. If it's a new belt, it's either too short or the geometry's all wrong on the clutch pulley. Try and clutch it and hold the brake tight and rev it a bit. That and the gearing is all wrong. I can help you fig it all out. We have some of the most proven and badass chassis in the sport that we designed and build.
You see that's why you built that track for!!🎉🎉
You need another 4 or 5 of a similar build to race with all the boys on Newyears eve with the fire ripping 🔥 away in the middle! 4 wheels may be a little safer than two wheels but it does seem to go pretty quick though however not sure how reliable they are compared to the mini bikes 😂😂
Boys! This is some of the funniest shit I have seen in a serious minute! Loving it!
I gotta say I love all the impulse purchases pretty entertaining
I forgot we had a kill switch 😂😂😂. What a Classic episode
JH coming with the heat lately!!!
Super cool, I bought a 16.5hp craftsman for $50, threw a Chinese starter at it after swapping the plastic bendex gear for the metal one. Just need a couple spindles, and I’ll be mowing grass in style.
Looks like fun! Add some nitro! I wonder if you can put a turbo or mini charger on those things.
Nah nitrous is your best bet. But that thing would be a flying death trap at that point
JH as Santa on the Mower would be peak entertainment 😅
When he was trying to start it with the kill switch off I couldn't stop laughing and thinking to myself I wonder if he's going to realize
Heh, Westen just switched the two pulleys on his, he had to put wheely bars on it, which he promptly bent
You gotta get some protective gear and take that thing round the freedom factory. Lawnmowers could honestly be cooler than crown vics.
you should do a yard tour with all trucks and extra parts and everything
If it ain't broke, it wasn't on the JH diesel channel!!!😂😂😂
This is going to be a fun adventure!!!!!! I’ve always wanted to build one just never have.
Years back, I had a racing lawn mower. I bought off a friend of mine. His dad raced it for a while but had built a new one. This thing was ridiculous. It had completely stock lawnmower steering but would do every bit of 50 mph. It would rip donuts in the grass and would have a foot long flame coming out of the side pipes. It eventually dropped a valve and trashed the motor, and I got rid of it. It's probably a good thing because I was gonna get hurt on it for sure 😅
That one tree coming out of the corner scares the crap out of me!
6.0 mud truck build series videos should be great!
That tree right off the turn there on the front straight is gonna be the end of someone lol
15:38 - that's my new ringtone. "She just aint got no chaaaaaain"
Get that track clayed up and slicked in and that lawn mower be a ripping out there.
Twice in this video I was cry laughing. Thank you, I needed that.
That ain't no racing mower in Australia where I am we have lawnmower races and guys put roadbike motors in them some up to 800+ cc 👍🏼👍🏼 dangerous but fun as hell
I can’t wait for the New Year’s party video🎉
You need to put padding on that tree!!!!!
You could also swap the motor out and put in a Predator 670cc motor in it from harbor freight. It's basically a V Twin motor making 22 HP. These motors are used on almost all new mowers. The Drawback is is it's $1,000 dollars and you'll probably need to fab up some motor mounts.
But the power would be insane. 😎👍
That mower has a vtwin on it now. But there are speed parts for the 670
@@Boostonabudget oh! I didn't realize it was already a vtwin. That explains the surprising speed. Lol
Yeah. Red beards garage bought a whole aftermarket pistons and rods for his. It's insane!
Hi I'm Craig, I race riding lawn mowers in Wisconsin, your racing lawn mower is a FXT 23hp v twin
Cant wait for the new years party video!
U guys read minds? U know exactly what I want!
Going to be a crazy bonfire!
Need an old jet ski on the back of each Prius pontoon, heh heh.
Fox the clutch and brakes and then have a race with cleetus at the FF track, you can also modify the engine and see what it can do on a 1/8 mile at Bradenton.
I can't wait to watch another New years party
✌🏽😎 every lap, that smile tells the whole story
You have a purless 5sped transmission
You have a good racing lawn mower
You're going to hurt yourself on that thing during your new years party 🤣
I had the sand rail as top performer but that has a new place in my heart ❤️
"Clunk, " just tore the transmission up huh? 🤣🤣🤣
love the content jh!!!
Please make an open mower race, we have a clan of them in Maine! Lol
I'm starting to build a V-Twin mower now, I'm stoked, probably end me but I'm stoked 😂
Y'all better cut that tree out or else lol especially on that sketchy ride 😂 but I bet it's a blast to drive!
Y’all should make a event. You’ll be surprised with the turn out. Hell I’ll show up with my mowers
Put more air in the back tire on the right. You can see a roll over in the corperiod
Get a few more of these. I’d like to see yall do a race on mowers when you have your big bonfire party.
Dude I got to get that new mechanic shirt for my dad. Tech can spot a problem, Mechanic can fix it.
😂 jh looked like the Shriners on the go karts in the parade ridding around in circles before realizing there’s a kill switch 😂
Be awesome with a front pocket for those 10mm sockets
Did you really try stopping that son of a gun with your foot 😂😂
Raced them for 15 years, you need to run one with a fully built engine!
1:00 Is that guy Georges, from Cleets channel, brother? Sure looks like him.
Had a few of these but eventually gave up as it was becoming to costly at around 1-2k per build with only basic stuff an engine alone could cost you 1k 2nd hand for 20hp (everything costs lots in NZ and you have to adhere to there specific rules if you want to race at the few tracks, Great bunch of people tho)
Have fun be safe and enjoy your large market
Well that will fruff up your mullet! He was smiling ear to ear
Get an engine from Steve Morris and you won't be let down by the gas mud truck.
Yea…$150 grand. He needs that 632 that Cleetus has sitting in the shop.
You going to finish that race truck
Maybe you could get an engine for the mud truck through blueprint engines??
If you happen to see this on the slim chance, I have a friend in VA selling a racing fuel powered racing mower, it was used for lawn mower pulls, fully built and tuned! Just let me know and I can get you in touch with him
Stick to the Can-am, you don't seem to be able to break it....... tooooo bad! hehe
Cant wait to see where this goes.
He’s like squirrel for Cletus he’s just jhs squirrel
You need the front half of a torque converter from a mini bike on the output shaft of the engine and you won’t burn up belts as fast
I'd buy a dually GMT800 shirt... to heck with that ferd business lol
You guys have too much fun 😂
JH gonna be in the new Mario cart
If you take the Prius out on the water, it’s gotta be able to get on plane😂
We have racing versions in the Netherlands that either have single cilinder 450cc ktm engine or a inline 4 600cc Japanese Motorcycle engines
Need to call out . Weston he's got him a lawnmower. . .
Rode ok mechanic here. Belts to small. Go bigger belt to allow it to disengage.
On Facebook marketplace 50 mile radius of Raleigh NC theres a Camaro on 6.2 diesel truck frame for 1200$ says it's a project
Bro can we see some in detail stuff on how this is built? The old Murray and my welder would like to know
How about a 2.4 hours of Lawn Mowers :D This thing is brutal!