Clean, Lubricate, and Adjust Chain on Ducati Monster 1200

How to clean, lubricate, and adjust your chain which should be inspected every 600 miles.
The following links provide a small commission that allow me to continue creating videos.
Chain Care Kit: amzn.to/3E7X7p8
Rear Hub C Spanner (Adjustment Tool): amzn.to/2YGj2Dy
T60 Torx Bit: amzn.to/3npSfpq

[@AlexutuS]

1. Don't need to remove the bold, just untorq it
2. If you look again on that sticker from the arm and manual it says 30-32 mm from the arm not all those hoses and plastic protection.

[@MrWesle1]

The bike should be on side stand as well when taking the measurements. Otherwise great vid

[@Jaxxo11]

Thanks for the great video

[@Jake-ki2pe]

May I have a link to the chain adjustment tool you used on the rear wheel?

[@sledzep01]

Louder next time please

[@anotherworld5612]

What about the high and low parts of the chain , you never just measure the chain sag in one location

[@allanharless3030]

Shouldn't you announce the torque adjustment on the final tightening of the bolt?

[@sledzep01]

Dude, your chain is rustier and dirtier at the end than before I start cleaning mine. I use Kero and gear oil... But no matter what product you use you should have cleaned the chain until ALL of the rust and dirt are gone... If you get is completely clean now... it will last longer before you need to do it again.

[@ducatidiy]

Yea it's bad and 5 years old at this point. There will be another video in the future replacing that chain.

[@droneforfun5384]

Whats the size of the adjustment tool? And whats the torque that must be used. Important information missing.

[@dymny9547]

Great video and bike
Thx

[@mildfrukt]

Nice thanks !