No one else is doing this kind of deep dive into the really useful stuff in such an understandable way. Most "walkthrough" videos are guys or gals just going through factory presets while shredding. That is nice and all, but I really learn something from you. Keep up the good work!
So nice to get a clear informed ‘how to’ tutorial when most other presenters have their foot firmly down on a tube screamer while cycling through all the presets
Straight forward and to the point. I just bought one of these units and your videos have been the most helpful. P. S. The audio levels are a bit low and they dip at important moments sometimes. Not a criticism, just a note.
thanks ... finally I know the function. it's just that I have 2 digital effects pedals of different brands. and I will still use it, because these 2 effects have a sound character that I like. I think the tool is for setting the use of 2 different digital effects.
I've noticed most reverbs have "decay" as the first parameter, and if you want to setup the reverb freeze, and have this parameter quite high, then the freeze function will increase the level of the freeze to an unusable level. Right now, in the section where you setup the footswitches, there is no parameter to the freeze function. Can they make a change to the firmware so that we can set a level for the reverb freeze?
Very simple explanation on how to set the MG-30's footswitch up. Now I'm going to have a play with it. Love your videos so far. As other's have said, the easy to follow detail you go into these reviews and tips is on another level. Keep up the great content!
Hi friend, a question, ¿can I configure the NMP-2 to be able to control the CTRL function of the NUX MG30? Or what other wired footswitch would work for that? thank you
Hi, can you make a video about mono and another output that nux mg30 has. As in how to connect it to a mixer board and how should we proceed with it live? Can we use it to pan two signals of guitar left and right? A video about connection
that's a very good explained, deatailed video! may I ask two questions although concerning the looper? 1. is it possible to save on the MG30 several loops (in oder to fire up different song parts)? 2. if yes, would it be possible to dial into these several parts via the separate pedal? thanks for your thoughts, greetings from wolf
Can we use the NMP-2 footswitch to change the preset? Like from 1A, if we press the B switch on NMP-2, it change to 1B, and from 1B we press the footswitch on the MG-30 and it change to 1C and so on? Thank you in advance
Great video. I would like to ask if it is possible to assign the presets to the onboard footswitches and the NMP2, so that I can switch between different sounds during livegigs?
Hello! I bought the nux mg 30 because I watched your videos and made the decision and it is worth it, however I have a problem, the NMP-2 only works with one switch, I don't know why! It depends on where I connect the cable. Please help!
Hey...thanks for the video. I'm trying to send PC messages to the MG-30 with no success so far. Can you tell me what I'm doing wrong if you see this post? Thanks man.
Thank you for this video! Your explanations and knowledge is second to none and I'm just getting to know my NUX MG 30 so this is helping a TON!!! Cheers and Happy New Year!
Another great video, thanks! I'm new to the amp and effects world so forgive me if I make no sense. With the Send-Return I/O, would you be able to connect the external expression pedal and keep all its functions without having to set it up through the EXP input? Would this allow you to keep the NMP2 and the additional expression pedal? Thanks again for all your useful content, I'm sure you're saving more than a thousand lives here.
Hi Pedal Guy - love your work. I have a question: Can you move the Volume/expression pedal (not the Wah) to a position in the pedal chain before the delay and reverb so that you don't kill the delay/reverb tail when you back off the volume pedal? Any help would be greatly appreciated.
Hi I am having problem with the exp1. When i plug in the NM2 and uses a tip/ring cable it does not respond., I have checked the cable and the NM2 but it will not work as it should giving me Stomfunctions? Have you any thought aboput what to do? Best Regards Björn Stockholm
Hi. I am actually taking pre-orders now as I expect to see my inventory arrive in early August. I only have a limited amount but you’re welcome to pre-order a unit
Great Video and overview....My question is, will it also work with my Digitech Trio+ Band in a Box Foot Pedal to help go through my sequences or parts etc?
One more thing. Thanks for the detailed video. I was wondering if it would be possible to assign NMP-2 with A and B to bank up and down and the footswitches on the pedal from left to right assigned to change patches, ie, 1A, 1B, 1C, and 1D (double press control switch). So when I press B, then 2A, 2B, 2C, and 2D are available, and so on. This would be much better for a live situation.
Hi pedal guy! I’m using my mg30 on the desk. But when i want to use looper it’s hard to control with my hands. Can i use the footswitch for this and how? Thanks for answer
Hello, please Is there any way to use the footswitch to change channels on the amplifier that the MG 30 is connected to and at the same time trigger a change in the MG like from one scene to another?
Is there any way to get the NMP Footswitch to control the Looper / Drum Machine? (I like the idea of leaving the MG 30 on my desk to quickly tweak stuff and use the foot switch for the looper which I heavily use)
Sir can you make a video about mono and another output that nux mg30 has. As in how to connect it to a mixer board and how should we proceed with it live? Can we use it to pan two signals of guitar left and right?
Is it just me or does my ring not do anything? I have it plugged the same way yours is and it’s set to delay and reverb the same as yours but the delay doesn’t turn on or off with the ring
hello there, I wan to ask. The A and B switch is functioning with stereo cable?.. I recently lost my stereo cables and use the mono cables. the A switch cannot be used or mine broken? :(
Hi, I wanted to know if the NMP2 can be used to select the scenes as well. What I mean is the onboard CTRL button controls one scene the two buttons can select the others.
Hi pedal guy! I’m using my mg30 on the desk. But when i want to use looper it’s hard to control with my hands. Can i use the footswitch for this and how? Thanks for answer
Can you assign the exp pedal A and B to different scenes? Example A assigned to Scene 1 and B assigned to Scene 2 and the CRTL switch assigned to scene 3.
If someone want to add the foot switch with this processor, is it need to add a extra adapter for use the footswitch or can use with the same adapter which is using in the processor?
@@ThePedalGuy I mean if I add the Nux NMP2 dual Footswitch with the Nux MG30 processor/ Boss GT-1 as extra control switch then I need extra power supply for the NMP 2 or not ?
Very good review, I have a question, the MG 30 comes with a dual footswitch, if instead of that I use a footswitch with more buttons? to use the NUX in stompbox mode or would the NUX not recognize more than 2 footswitches? My decision to buy it depends a lot on this Thank you in advance!
Honestly not sure if you can do that or not. I would check with NuX on this. Which footswitch were you thinking about? The only one I know that has more switches is the Digitech FS3X.
Thanks for the video..seems like a cool pedal. What I don't understand is why the provided cable is so short. I'd want mine to be capable of being placed on any side of the MG30 so I don't have to perform foot acrobatics to reach over the MG30 while performing live..am I missing something?
Very informative video! I have a question: How do i assign the expression pedal to be a whammy/ poly pitch pedal, and set the minimum to +0 and and the maximum to +12? Thanks a lot
Do we need to power the Hotone soul press with 9v to work as an secondary expression pedal for any multi effects processor which has expression pedal out??
Hello. I have two questions about Nux MG-30 product. Can I use an external wah pedal simultaneously with NMP-2 Switch? Can I use NMP-2 switch as a continuous part of the Nux MG-30 for using like a patch mode? For example, 1. and 2. patch will come from Nux, 3. and 4. patch will come from NMP-2 switch. So I can have 4 patches on board like 1-2-3-4. Best regards.
Great video, thanks for sharing. Can you use the extra foot switch to control the looper? Could you program one button to stop and one to record etc....?
What a useful video - it just so happens I have a NuX MG 30 on it's way to me and by strange coincidence the same Hotone foot pedal you demonstrated, but I have a question: the Hotone foot pedal (or the version of it I've bought) is a three-way pedal - with an expression function, a volume function, and a wah function, all in the one foot pedal, the functions being switchable on the pedal... so... if I connect that pedal to the MG 30 and assign it to a particular function within the MG 30 (say, as a volume controller) will it only work as a volume controller within the MG 30, regardless of how the pedal itself is switched, or will it still be switchable to its own other functions such as wah? Thanks for the great content. I previously watched your video about 'scenes' which I hadn't even realised was a function in the unit. Other demonstrators have eluded to switching to a 'lead' or a 'crunch' version of a basic tone by hitting CTRL but haven't intimated how those variations got there. So that video was immensely helpful. You are the blble for learning to use the unit. Thank You.
Hi! I am having some hard time using the NMP-2 with Cerberus. My idea is to have one of the switches to control de modulation part, but even when I leave the effect off on NMP-2 (After setting up on software of course) and hit Modulation switch to activate the chorus, the modulation on the right comes along and then I have to turn it off on the NMP-2. That is annoying. Is there a way to set it up completely individually? thanks
No one else is doing this kind of deep dive into the really useful stuff in such an understandable way.
Most "walkthrough" videos are guys or gals just going through factory presets while shredding. That is nice and all, but I really learn something from you. Keep up the good work!
Thank you very much. I appreciate it
Great work, you are THE manual for this thing!
Thanks
So nice to get a clear informed ‘how to’ tutorial when most other presenters have their foot firmly down on a tube screamer while cycling through all the presets
Thanks
Ah! Many thanks. You saved me from buying a power adapter I didn't need and explained how to use the nmp-2.
Subbed!
Thanks
Just bought myself an MG-30, your videos helped me decide what to buy and the 'how to' videos are very helpful. Thanks!
Glad you like them!
@@ThePedalGuy would you upgrade frim MG30 to Hotone Ampero Stomp? Just comparing sound quality.
I love the way you explain complexive things in a few simple words! Subcribed!
Thanks
Hi, I have a problem with the NMP, when I plug it into the MG30 I cannot use the switch A. Only the B is working. Where am I wrong?
I solved ...did not use a TRS cable so just one switch was working
@@antoniospasaro4017I am also facing the same problem here bro
I having same problem
Hooray for concise content🙌. Thanks for making it simple to follow. I may be back for more questions as I just got my MG30
Cool
Straight forward and to the point. I just bought one of these units and your videos have been the most helpful.
P. S. The audio levels are a bit low and they dip at important moments sometimes. Not a criticism, just a note.
Thanks for watching.
@@ThePedalGuy my pleasure.
This thing is complicated af omg
thanks ... finally I know the function. it's just that I have 2 digital effects pedals of different brands. and I will still use it, because these 2 effects have a sound character that I like. I think the tool is for setting the use of 2 different digital effects.
Glad to help
I've noticed most reverbs have "decay" as the first parameter, and if you want to setup the reverb freeze, and have this parameter quite high, then the freeze function will increase the level of the freeze to an unusable level. Right now, in the section where you setup the footswitches, there is no parameter to the freeze function. Can they make a change to the firmware so that we can set a level for the reverb freeze?
Very simple explanation on how to set the MG-30's footswitch up. Now I'm going to have a play with it. Love your videos so far. As other's have said, the easy to follow detail you go into these reviews and tips is on another level. Keep up the great content!
Glad to help
Hi friend, a question, ¿can I configure the NMP-2 to be able to control the CTRL function of the NUX MG30? Or what other wired footswitch would work for that? thank you
I knw this is out of topic however can that footswitch work for boss katana 50 direct to the back? Can it work with boss gafc?
No idea but in theory it should work
Thank’s a lot dude, this things block me since 1 week!
Cool
Good info.
Glad to hear
Hi, can you make a video about mono and another output that nux mg30 has. As in how to connect it to a mixer board and how should we proceed with it live? Can we use it to pan two signals of guitar left and right?
A video about connection
that's a very good explained, deatailed video! may I ask two questions although concerning the looper? 1. is it possible to save on the MG30 several loops (in oder to fire up different song parts)? 2. if yes, would it be possible to dial into these several parts via the separate pedal? thanks for your thoughts, greetings from wolf
Can we use the NMP-2 footswitch to change the preset? Like from 1A, if we press the B switch on NMP-2, it change to 1B, and from 1B we press the footswitch on the MG-30 and it change to 1C and so on? Thank you in advance
This is what i am looking for because i want to avoid tap dancing..
The The pedal guy didn't responded to the comment
Great video. I would like to ask if it is possible to assign the presets to the onboard footswitches and the NMP2, so that I can switch between different sounds during livegigs?
Haven't tried that yet.
Thomas, did you ever find the answer to this? I want to switch between different presets while playing live. Thanks, if you read rhis.
Man youre great !! So much detailed stuff. Thanks!
Thanks for the kind words
Hello! I bought the nux mg 30 because I watched your videos and made the decision and it is worth it, however I have a problem, the NMP-2 only works with one switch, I don't know why! It depends on where I connect the cable. Please help!
Hey...thanks for the video. I'm trying to send PC messages to the MG-30 with no success so far. Can you tell me what I'm doing wrong if you see this post? Thanks man.
Hi. Are you asking about sending MIDI messages to the MG-30? Need more info.
Brilliant
Thanks
Thank you for this video! Your explanations and knowledge is second to none and I'm just getting to know my NUX MG 30 so this is helping a TON!!! Cheers and Happy New Year!
Appreciate it.
Hey, can we assign presets to these switches? Like one switch is amoled to one patch, another to some other tone patch.
No sorry.
Can it run into the stereo setting?
Not quite sure what you mean. Please expand on this?
Great vídeo! Can I switch the bank with this Nmp2? (I mean switch from 1A to 2A)
Another great video, thanks! I'm new to the amp and effects world so forgive me if I make no sense. With the Send-Return I/O, would you be able to connect the external expression pedal and keep all its functions without having to set it up through the EXP input? Would this allow you to keep the NMP2 and the additional expression pedal? Thanks again for all your useful content, I'm sure you're saving more than a thousand lives here.
Hi can i asign each button of the nmp 2 to a scene ?
As I recall, it's just the 3rd footswitch that can be assigned to a scene.
How about use it for tap tempo for delay?
Hi Pedal Guy - love your work. I have a question: Can you move the Volume/expression pedal (not the Wah) to a position in the pedal chain before the delay and reverb so that you don't kill the delay/reverb tail when you back off the volume pedal? Any help would be greatly appreciated.
Yes this should be possible.
Sir I wanto konw how to cut or remove noise of any tone ( distortion) on MG30????
Adjust the noise gate
Can you use the NMP-2 as bank up & down function? like the HX Stomp.
Not that I'm aware of.
Hi I am having problem with the exp1. When i plug in the NM2 and uses a tip/ring cable it does not respond., I have checked the cable and the NM2 but it will not work as it should giving me Stomfunctions? Have you any thought aboput what to do? Best Regards Björn Stockholm
You sure you are using the correct cable? The one that comes with the mg30?
Make sure its a TRS cable, not a TR cable. It must be Tip Ring Sleeve to work
Having on great info. Any news when this unit is a really going to be available in the US no one seems to have these in stock?
Hi. I am actually taking pre-orders now as I expect to see my inventory arrive in early August. I only have a limited amount but you’re welcome to pre-order a unit
Great Video and overview....My question is, will it also work with my Digitech Trio+ Band in a Box Foot Pedal to help go through my sequences or parts etc?
Thanks. I don’t think that will work as the FS3X is a three footswitch pedal.
What if you connect the expression pedal to the input an then to your guitar?
I don’t quite follow the question. Please expand on this
Hi, is this compatible with an MG300?
No sorry
One more thing. Thanks for the detailed video. I was wondering if it would be possible to assign NMP-2 with A and B to bank up and down and the footswitches on the pedal from left to right assigned to change patches, ie, 1A, 1B, 1C, and 1D (double press control switch). So when I press B, then 2A, 2B, 2C, and 2D are available, and so on. This would be much better for a live situation.
Hi pedal guy! I’m using my mg30 on the desk. But when i want to use looper it’s hard to control with my hands. Can i use the footswitch for this and how? Thanks for answer
Hello, please Is there any way to use the footswitch to change channels on the amplifier that the MG 30 is connected to and at the same time trigger a change in the MG like from one scene to another?
Great video!! One question, can i connect nux mg30 with other brand of footswitch that has 4 or more control switch?
I don't believe you can. I think I tried the FS3X and it didn't work out.
Thanks for this. So we can only use one wah pedal at a time along with the controller. Am I right.
Yes
@@ThePedalGuy Got it thanks.
Is there any way to get the NMP Footswitch to control the Looper / Drum Machine? (I like the idea of leaving the MG 30 on my desk to quickly tweak stuff and use the foot switch for the looper which I heavily use)
Helooo !!
Can I Split Expression and Footswitch at the Same time ?
this mg30 can connect direct to mixer?
Yes
Amazing tutorial, thank you so much...very easy to understand and well explained!
Glad you liked it
Sir can you make a video about mono and another output that nux mg30 has. As in how to connect it to a mixer board and how should we proceed with it live? Can we use it to pan two signals of guitar left and right?
I must have a dud for an expression pedal, I set it up as shown here but only the B channel does anything.. the A switch is not responding at all.. :(
can you use an external expression pedal for wah? mine won't work
Can the NMP-2 switches be assigned to looper functions?
Will this work with Nux mg300
No. The mg300 doesn’t have an input for footswitches
My switchs in NMP 2 is not working together... Can you tell me why ??
Sir, Can i use the NMP2 Stop for Scenes? Thanks!
Nope
@@ThePedalGuy Thank you sir! Subbed 🧑
Is it just me or does my ring not do anything? I have it plugged the same way yours is and it’s set to delay and reverb the same as yours but the delay doesn’t turn on or off with the ring
I'm lost with this mfr, I'm gonna give it another week or two, but I'm about to break my laptop and ship the mg30 back. Windows is criminal
Question. I bought a Nux mg 300 and I have a Nux Mg 30, but Quicktone doesn't open with the mg 300. what can I do?
hello there, I wan to ask. The A and B switch is functioning with stereo cable?.. I recently lost my stereo cables and use the mono cables. the A switch cannot be used or mine broken? :(
Correct a TRS cable will do the trick.
Why my MG 30 dont recognizes my wah wah pedal 😢 ????
Hi, I wanted to know if the NMP2 can be used to select the scenes as well. What I mean is the onboard CTRL button controls one scene the two buttons can select the others.
No unfortunately it doesn’t work like that
Hi pedal guy! I’m using my mg30 on the desk. But when i want to use looper it’s hard to control with my hands. Can i use the footswitch for this and how? Thanks for answer
Hi. I don’t believe the nmp2 can be configured for the looper
thanks for this dude, owner's manual is not deep at all
You got it
does this has Tap delay?
Yes absolutely
Can you assign the exp pedal A and B to different scenes? Example A assigned to Scene 1 and B assigned to Scene 2 and the CRTL switch assigned to scene 3.
No Scenes can't be assigned to the NMP2
Thanks for the detailed video. Can the four controls be assigned per patch or these are global?
If someone want to add the foot switch with this processor, is it need to add a extra adapter for use the footswitch or can use with the same adapter which is using in the processor?
Not sure what you mean with extra adapter. The two footswitch that’s included doesn’t require additional power if that’s what you mean
@@ThePedalGuy I mean if I add the Nux NMP2 dual Footswitch with the Nux MG30 processor/ Boss GT-1 as extra control switch then I need extra power supply for the NMP 2 or not ?
@@arghyabakshi85 not 100% sure but the NMP2 doesn’t need a power supply when used with the MG30
Very good review, I have a question, the MG 30 comes with a dual footswitch, if instead of that I use a footswitch with more buttons? to use the NUX in stompbox mode or would the NUX not recognize more than 2 footswitches? My decision to buy it depends a lot on this
Thank you in advance!
Honestly not sure if you can do that or not. I would check with NuX on this. Which footswitch were you thinking about? The only one I know that has more switches is the Digitech FS3X.
I have answered you 2 times, but I don't know why they are deleted or do you delete them? Anyway, thanks for answering
thank you, sir!
You bet
can u use the np to change scenes?
Yes. Just created a new short vid that will show you how.
Thanks for the video..seems like a cool pedal. What I don't understand is why the provided cable is so short. I'd want mine to be capable of being placed on any side of the MG30 so I don't have to perform foot acrobatics to reach over the MG30 while performing live..am I missing something?
Thanks. A longer trs cable is easily found and quite affordable 😉
Very informative video! I have a question: How do i assign the expression pedal to be a whammy/ poly pitch pedal, and set the minimum to +0 and and the maximum to +12? Thanks a lot
Thanks for your watching. Got ya covered. Here’s a vid that covers the whammy. ua-cam.com/video/_IUNsxJknUw/v-deo.html
Can i change the presets from the NMP-2..like if i want to use it as bank 1,2,3,4 ???
can i use another footswitch for mg30 instead of the nmp2?
i want to use a 4way footswitch other than 2way one
Not that I’m aware of
I wish they had given us just one more switch!! Then it would be perfect for the weekend warrior
Good feedback
Do we need to power the Hotone soul press with 9v to work as an secondary expression pedal for any multi effects processor which has expression pedal out??
Thank you ..
Thanks
Thanks
Thx
Could you help me understand if I need one of theses for the jtc looper drum combo petal and how it my help?
SUPER!!! :)))
Many thanks!!
Hello. I have two questions about Nux MG-30 product.
Can I use an external wah pedal simultaneously with NMP-2 Switch?
Can I use NMP-2 switch as a continuous part of the Nux MG-30 for using like a patch mode? For example, 1. and 2. patch will come from Nux, 3. and 4. patch will come from NMP-2 switch. So I can have 4 patches on board like 1-2-3-4.
Best regards.
Thanks man. Just got mine and you answered my questions. Loving it.
Glad to hear
Can you use NMP 2 along with patch up and down footswitches on MG30 for switching between 4 different presets?
No sorry
@@ThePedalGuy Ooohh hopefully with a firmware udpate in the future.
Is it possible to change the language from Chinese to English if I buy there??
If you buy where? Please specify
@@ThePedalGuy if I buy a Chinese MG30, can I change to English in the settings?
@@lennonsilva7908 not sure.
Thank you :-)
You bet. More content to come
mine are not worked with joyo wah pedal :( help me please
When using the expression pedal as a volume pedal: is it possible to set a minimum volume.
Not quite sure. I'll need to check into that.
@@ThePedalGuy : Thanks - even my GT1 is able to do that so that's why I am asking.
Can I use buttons of this footswitch for presets ?
Can we use setting also in mg300?
Nope. It doesn’t have an exp input
Can I use a Boss A/B pedal the same as the MG30 foot switch?
If you're asking about the AB2 I don't think that will work. That's why we included a FS in the box ;-)
Great video, thanks for sharing. Can you use the extra foot switch to control the looper? Could you program one button to stop and one to record etc....?
wow this is endless possibilities. thanks for this mg30 tutorial
Glad you like it!
What a useful video - it just so happens I have a NuX MG 30 on it's way to me and by strange coincidence the same Hotone foot pedal you demonstrated, but I have a question: the Hotone foot pedal (or the version of it I've bought) is a three-way pedal - with an expression function, a volume function, and a wah function, all in the one foot pedal, the functions being switchable on the pedal... so... if I connect that pedal to the MG 30 and assign it to a particular function within the MG 30 (say, as a volume controller) will it only work as a volume controller within the MG 30, regardless of how the pedal itself is switched, or will it still be switchable to its own other functions such as wah? Thanks for the great content. I previously watched your video about 'scenes' which I hadn't even realised was a function in the unit. Other demonstrators have eluded to switching to a 'lead' or a 'crunch' version of a basic tone by hitting CTRL but haven't intimated how those variations got there. So that video was immensely helpful. You are the blble for learning to use the unit. Thank You.
Hi! I am having some hard time using the NMP-2 with Cerberus. My idea is to have one of the switches to control de modulation part, but even when I leave the effect off on NMP-2 (After setting up on software of course) and hit Modulation switch to activate the chorus, the modulation on the right comes along and then I have to turn it off on the NMP-2. That is annoying. Is there a way to set it up completely individually? thanks
Hi, are destinations 2 and 3 accessible without the footswitch? If yes then are there any designated buttons for them?
can I connect an expresssion pedal with nux mg 300?
Nope. It’s self contained
Ok i have not thé scène on Numbe4 on my pedalboard??!! What is it?
There's no Scene 4. Not sure what you mean
Nux mg 30 or zoom g5n which is better?
MG30 gets my vote at this point.
Thankyou for your video.... Very helpful 🤘
Thanks
How do you switch Scene 2 back to Scene 1 without going around Scene 3?
This will answer your question ua-cam.com/users/shorts5yRET8P4InI