hi i have a question with regaards to recording mg30... i just purchased an mg30 and i seems to have an issue with high frequency noise and hissing sound when playing the guitar pluged in via usb( all stock setting and patch) but when plugged in to the amp and headphones it sound very clean...how can i solve this issue ?? thanks a lot im hoping for your response🙏
Hello I wish i can get a response from you My audio setup keeps giving this humming sound like an electric hum sound when i connect my my 30 to my desktop computer. But when its unplugged the humming stop and i can play my guitar well. What can i do please
I have some edifier s3000 monitors which have USB audio in. I need to know how to plug my mg30 to my PC then PC to my s3000 via USB if anyone can help it would be much appreciated. I have quicktone and the other program in this video. So basically, 1:13 how do I get a sound 😢 it notices my mg30 in quicktone but how do I get reaper to notice the signal?
Hoping you’ll see this because I’m pulling my hair out with this - trying to reamp with mg30 and a patch with IR off and an IR plugin on the track I’m reamping to - but I only hear the signal from the mg30 sounding terrible with no IR and not hearing the IR plugin. I thought that the audio coming out of the mg30 headphone Jack would be the output on my master bus and not the actual audio being recorded from the device itself? Looking to do this as an easy way to dial tones with the IR plugin and when happy, export the IR to wav to load onto the mg30
@@ThePedalGuy Thank you very much for answering, from what I have seen, I was finally able to do it but using the NUX MG 30 as an audio interface. I wanted to use these functions with my audio card but couldn't, maybe it's because my kurzweil unite 2 interface has only two outputs? 1 and 2. I think I'll be able to use reamp with nux as the only interface, but I'll have to work only at 48,000 khz
Hi, I've a problem that don't undestrand. When I connect the MG30 to my Audio Interface (an a AUDIENT ID14), the Pedalboard take a control of any audio on my Macbook, also for the audio playback on youtube for instance. And on control panel of my audio interface I see that the guitar sound and the playback are managed from the same channel. Any suggest? Thanks in advance.
Is there any way to use this via usb-c to lightning cable from NUX MG-30 to iphone 12 to record sound and/or video? I've searched, I've emailed the company..and can't find an answer. I'm supposing this means no..but figured I'd ask. Thanks for any info you may provide.
Hi, I have a question. When I use my MG30 as an Audio interface how can I switch on and off guitar input monitoring? I mean it is always in playback mode with the guitar how can I ignore the guitar input. So when I use my other "real" audio interface when I disable the input (or mute that channel or get it not aimed)in the daw the guitar gets muted when I do the same with mg30 it still on I hear the guitar. is there any way to make it act like a full time Audio interface? (because it is still a guitar pedal as far as I understand so the phones output always connected to the guitar input.) I hope I was clear. Thank you!
@@ThePedalGuy Thank you for your answer. One more question if I may how can I switch to BPM tempo sync delay time (4th 8th etc) in the quick time editor without touching the pedal? BTW how can I do that using the pedal??
Thanks. It’s hard to say because they are both very different from each other. Keep in mind the MX five is $200 more so it stands to reason that there are more features for the price.
Hey, why is it that the patches I created on my guitar amp sound different in my DAW when recorded through MG30? Im a beginner so I really can't tell whats the problem
I just got this machine and for some reason, when I connect the usb to a laptop, it says it wants me to connect via USB. I have tried this on multiple PCS already. Have no idea why it won’t recognize it for some reason. The unit is brand new
Hello, i have a question regarding the buffer size in the asio settings , does the buffer size sample affect latency considering that we use the output headphone/speaker jack from the NUX?
thanks for the reply , kind of a follow up question, when we change buffer size it affects the CPU usage, but will the asio driver use the 2 CPUS from the NUX or will it use my computer CPU?@@ThePedalGuy
Thanks so much for the quick replies, if you could also in the future make a step by step video on how to use the NUX MG30 as an audio interface , so it can be used with other plugins such as Neural DSP/ Amplitube etc. I've heard is possible , i've tried it myself but couldn't make them work perfectly. @@ThePedalGuy
Hello, Would I get better sound quality if I connect the Nux MG30 to audio sound card and record, or should I directly connect it to the computer via USB for better recording quality?
Hi very useful videos thank you. Question: - Can I sync my daws midi clock with the mg 30 via USB? (So th mg30 match the tempo with my daw for delay for example) Thanks!
When I load a backing track, it plays with a lot of static. No matter what I do in my DAW, the static is still there. Is there something special I have to do with the MG 30 when using it as an interface?
@@ThePedalGuyHey thanks for answering so quickly. I actually bought my MG 30 from you. I love it. Yes, I tried everything. I have a friend with the same DAW. He tried to help but we still can't get the static out. I've ordered an audio interface to check it. It will arrive next week. It's really strange.
Dude I just watched this and i did everything but i still find a LOT of latency when i use my nux with my neural dsp plugins, could you try it out and let me now if you could rectify it?
Thanks for this. I use the Steinberg UR22 hardware interface and Garageband. Do I take the 2 outs from the NUX 30 to the 2 inputs of the Steinberg UR22? I am receiving my NUX this week and would like some suggestions. Thanks in Advance.
So basically what I am asking is, if I want to use another plugin such as Neural etc is there a way to completely bypass quicktone and use the mg30 as a simple interface. I also wanted to use a plugin tuner as it is more efficient. I was also looking to use an IR loader plugin to test various IRs more rapidly. Hope this makes sense !
Ok, when I record reamping to another track - what is the difference between outputting to Output 1/2 and outputting to Output 3/4? Is the signal in Input 1/2 any way different in these two options? Would it be bad recording reamped track using Output 1/2? I can hear no difference - this is why I ask.
It's been a year, but if you're still interested in an answer: If I don't misunderstand your question, the only difference is that Reamp Input 1/2 - Output 1/2 overwrites the previous dry track with the new reamp, while Input 1/2 - Output 3/4 records the new reamp track to Output 3/4 as the name suggests, so you get a new track without deleting the original (as long as you've also assigned the corresponding Output 3/4 to your DAW on another track). It's just a way to make sure you keep your dry track, there is no difference in sound. That's why I prefer the dry-out method with the wet signal on 3/4, because it creates two tracks at the same time, I can jam with my favourite effects chain and if I want to change something with plugins or whatever, I can still do that because I still have my dry track there. It's just more practical to me.
@@Drumming_Monkey Ok. I think I understand the difference. The recorded music through reamped 1/2 and 3/4 with dry 1/2 would be the same - it will be the original recording after applying the current NUX MG-30 settings. The difference would be what goes to 1/2 outputs while recording. With wet output 1/2 will be with effects applied, with dry - just the original. I think it would be useful, if we want to do something else with the original signal *during* recording. Thanks for your answer! 🙂
@@ThePedalGuy I can't seem to get that solution working - My actual amp (THR10)'s tone which I can hear clearly after switching off every pedal/amp on Quicktone except for Noisegate. But what comes out of Audacity recording is a dry tone with no effects at all. How do i get Audacity to record what I'm hearing (actual amp sound + Noise gate from Quicktone)?
Can an android phone used as recording using Nux mg-30? And if yes what software to use and how to configure? Can Nux mg-30 be uses as audio interface just like Nux mg-300?
@@ThePedalGuy i tried a while a go. I use 2 channel mini mixer which i bought on online store. It's yamaha M4 mixer. Then i use open camera app on play store which i downloaded. Set the auio option on settings on open camera then that's it i figure it out. Mixer serves as audio interface i guess because you can also connect to a Desktop computer and it also work but the disadvantage is it has a humming sound because the mixer need a 5v 1amp or 2amp power source. But if you use 5v 1amp or 2amp power source there's no humming sound or unnecessary sound.
Ah I'm sorry maybe my comment would have been better placed here instead of the other video, so I'm posting it here again in case others may have encountered the same issue and can help: I'm incredibly frustrated right now. My MG30 won't send a signal to my Mac over USB. I'm in Studio Direct Mode, I can switch through my patches and Quicktone responds, so there IS connectivity, but no Sound comes through. Mac shows the MG30 is connected as input but doesn't get signal, Reaper doesn't get a signal as well. When I connect my headphones to the unit I get sound but nothing will get sent through to my Mac. It is driving me nuts at this point. Can you give any advice? I already re-installed the driver on the MG30, Quick-Tone, everything. Nothing works. I'm out of ideas...
Thanks for sharing, great Vid. Would you happen to know why, when I connect to my DAW (Cubase) using the USB and Nux asio drivers, the playback speeds up, I.e., the tempo is faster than what the DAW is set to?
Hi. First say, the best pedal guy ever🤟🏽 Just a problem and hope you can guide me. I connect the mg 30 to my Daw, I use FL Studio. And though I hear and see the signal of the guitar on the mixer, it hardly reaches - 15 dB. I've tried everything, but cannot manage to rise the input signal. 😢
Hi, first thank u so much for making this videos. Second, I have a question, my dry signal its really low, even though my volume is at the top. Do u know why and how to fix this? And when I try to record the drummachin within Reaper, my track does not work,it freaks out. Thank u!
Hey Hello. I have a question. I recently bought nux mg30. I tried it with earbuds mp3 headphone and the sound is very bad. I download the same preset, it sounds great in video, but it sounds very bad in me. i use squier affinity strat but i dont think the problem is guitar. Would buying a reference headset or monitor work? I want to buy kurzweil ks40-a, will it work? thank you
Hi ! if I use my DAW cubase and the USB for the Nux MG30. how the track is loaded ? do I need to create a track or is it automatically done with a function ? (and by the way, is look like a stereo track as is showed in your video)
Well you would select the MG30 as you’re audio device in cubase, create a stereo track and that should do it. Keep I mind that every daw has its way of working and it’s been years since I last used cubase so you’ll need to refer to the cubase manual to be sure
@@ThePedalGuy thanks for your response... It can be useful if I choose USB mic and keyboard for a recording.. even if I think the analog connection must be the solution, without using 2 external sound cards device for the same project... except If I can plug the mic in the Nux Mg30 and bypass the guitar effects...
@@Dami1rush Sure you can toggle between them if you'd like. I would just suggest that if you're going to record the MG30, do it via USB rather than plugging it into another audio IO.
@@Dami1rush because you will performing an additional analog to digital conversion otherwise. It’s unnecessary and will introduce noise into your recording
Does it allow you to send the audio output to another device when you're recording or do you *have* to use the built-in headphone port to be able to listen to both your guitar and whatever's playing in the DAW? Thanks!
Hi! Great video! I just wonder have you ever tried recording the NUX MG-30 with the GarageBand on an iPad using usb cable (in my case it’s usb-c to usb-c cable, since I’ve got 2021 iPad Pro)? I don’t have the MG-30 just yet, so can’t really check it myself. Just trying to figure out if such a way of recording would work! Or would I also need an audio interface? Thanks!
Hi Pedal Guy, thanks for your video! Now I understand how it would work, but my CUBASE LE does not recognize the MG 30 as interface if it is connected only wiht USB C to the USB Hub of my computer! What DAW do you use? Do you have any clue? THX
Good morning. My mg30 connected with a usb3 port make an incredible noise. Tu reduce that at the minimum i found that a 5mt long cable and usb2 port helps a lot. Asio driver are preatty crap. In a dow once the input focus are on it the noise raise up. Any clue about that? Any solution as fae as you know? Btw you are an ansome guy and thanks for the channel.
Thanks for watching. I feel the driver is pretty solid with the right conditions. I've been working heavily in ASIO since the late 90s so I've come across many horrible ASIO drivers. The main issue I've run into here is using it with a hub doesn't work so well. Also, making sure that your wireless and bluetooth are disabled. This is if you're working with an off the shelf PC like the HP i've used in most of my vids.
Hi Pedalguy, i am new at this so here goes a question for you. I wonder if i just need to plug the Nux to the PC in order to record the audio with Reaper software or i need to set another stuff ?
Hey Dude, really like your channel. Due to you, I'm looking at the Nux MG-30. You promote the USB section, but for someone like me that has no hands on with this unit... Can you maybe do a little connection video, or at least tell us what we need to connect to the MG-30? for PC... Is it USB-A to USB-Micro, IS it USB2 to USB"C"... I have tons of cables but nowhere in the specs does it say what the exact USB cable is. Thanks Keep rockin.
The audio interface capabilities of the mg30 are incredible. Thanks for sharing👊👍
You bet!
I bought the MG30 some weeks ago and I'm still discovering amazing functionalities, thanks man!!
Thanks.
HI Pedal Guy! I just got this Mg-30. Thanx for the video. I'll check that dry and wet option....just updating Firmware.....
Cool! Enjoy
hi i have a question with regaards to recording mg30... i just purchased an mg30 and i seems to have an issue with high frequency noise and hissing sound when playing the guitar pluged in via usb( all stock setting and patch) but when plugged in to the amp and headphones it sound very clean...how can i solve this issue ?? thanks a lot im hoping for your response🙏
Hello
I wish i can get a response from you
My audio setup keeps giving this humming sound like an electric hum sound when i connect my my 30 to my desktop computer. But when its unplugged the humming stop and i can play my guitar well.
What can i do please
It could be the USB cable you’re using. Make sure you’re using a shielded USB cable for best results.
I have some edifier s3000 monitors which have USB audio in. I need to know how to plug my mg30 to my PC then PC to my s3000 via USB if anyone can help it would be much appreciated. I have quicktone and the other program in this video. So basically, 1:13 how do I get a sound 😢 it notices my mg30 in quicktone but how do I get reaper to notice the signal?
Hi. Is there a possibility to record via USB with backing track playing on aux in ? I can record only my guitar.
I'm really gratefull. Now I can record drums. Great job.
Glad I could help!
can i record directly into open camera app using my android phone using the usb feature?
Hoping you’ll see this because I’m pulling my hair out with this - trying to reamp with mg30 and a patch with IR off and an IR plugin on the track I’m reamping to - but I only hear the signal from the mg30 sounding terrible with no IR and not hearing the IR plugin. I thought that the audio coming out of the mg30 headphone Jack would be the output on my master bus and not the actual audio being recorded from the device itself?
Looking to do this as an easy way to dial tones with the IR plugin and when happy, export the IR to wav to load onto the mg30
The video sound is pretty good, beyond my imagination
Excellent
Thank you very much. Very useful tutorial 😍
Appreciate it
Thank you! This video helps so much!
Glad to help
How do I do this in Cubase? I can't find the configuration for output 3 and 4. thank you so much
As I recall in cubase you need to enable those outputs in your audio setup. Haven’t used cubase in several years so you’ll need to experiment a bit
@@ThePedalGuy Thank you very much for answering, from what I have seen, I was finally able to do it but using the NUX MG 30 as an audio interface. I wanted to use these functions with my audio card but couldn't, maybe it's because my kurzweil unite 2 interface has only two outputs? 1 and 2. I think I'll be able to use reamp with nux as the only interface, but I'll have to work only at 48,000 khz
Hi, I've a problem that don't undestrand. When I connect the MG30 to my Audio Interface (an a AUDIENT ID14), the Pedalboard take a control of any audio on my Macbook, also for the audio playback on youtube for instance. And on control panel of my audio interface I see that the guitar sound and the playback are managed from the same channel. Any suggest? Thanks in advance.
Is there any way to use this via usb-c to lightning cable from NUX MG-30 to iphone 12 to record sound and/or video? I've searched, I've emailed the company..and can't find an answer. I'm supposing this means no..but figured I'd ask. Thanks for any info you may provide.
Excellent! Your video helped me a lot. Thank you! Hugs from Brazil!
Thanks
Hey, how do I play a backing track and improvise on it with Nux mg 30 all this while recording it via usb?
I would load the backing track into a DAW like GarageBand on Mac or reaper on PC. Then you can jam along and record your performance as well.
@@ThePedalGuy Hi, man thanks for the reply. It'd be a great help if you can put out a video lesson for this.
Reaper doesnt seem to be recognizing my MG30, what can I do??
Hi, I have a question. When I use my MG30 as an Audio interface how can I switch on and off guitar input monitoring? I mean it is always in playback mode with the guitar how can I ignore the guitar input. So when I use my other "real" audio interface when I disable the input (or mute that channel or get it not aimed)in the daw the guitar gets muted when I do the same with mg30 it still on I hear the guitar. is there any way to make it act like a full time Audio interface? (because it is still a guitar pedal as far as I understand so the phones output always connected to the guitar input.) I hope I was clear. Thank you!
It can function just fine as an All in One audio IO. I'm not sure I understand the entire question, but it does work just fine as an audio IO.
@@ThePedalGuy Thank you for your answer. One more question if I may how can I switch to BPM tempo sync delay time (4th 8th etc) in the quick time editor without touching the pedal? BTW how can I do that using the pedal??
pretty cool. How would you compare this to headrush mx5?
Thanks. It’s hard to say because they are both very different from each other. Keep in mind the MX five is $200 more so it stands to reason that there are more features for the price.
Hey, why is it that the patches I created on my guitar amp sound different in my DAW when recorded through MG30? Im a beginner so I really can't tell whats the problem
I just got this machine and for some reason, when I connect the usb to a laptop, it says it wants me to connect via USB. I have tried this on multiple PCS already. Have no idea why it won’t recognize it for some reason. The unit is brand new
Sorry for the late reply. I would suggest following the MG-30 FB Group. This issue/question has been answered/resolved several times there already
stupid question how do you connect it to computer? thanks
There’s a USB cable in the box to connect it to your computer
Hello, i have a question regarding the buffer size in the asio settings , does the buffer size sample affect latency considering that we use the output headphone/speaker jack from the NUX?
Buffer affects the latency if you’re monitoring your inputs. If you record with Direct monitor off on your DAW you should be fine
thanks for the reply , kind of a follow up question, when we change buffer size it affects the CPU usage, but will the asio driver use the 2 CPUS from the NUX or will it use my computer CPU?@@ThePedalGuy
@@christosgeorgiou8322 sure thing. As far as I know the ASIO has nothing to do with the cpu on the MG30
Thanks so much for the quick replies, if you could also in the future make a step by step video on how to use the NUX MG30 as an audio interface , so it can be used with other plugins such as Neural DSP/ Amplitube etc. I've heard is possible , i've tried it myself but couldn't make them work perfectly. @@ThePedalGuy
Is the "Studio Direct Output" setting for going straight into studio monitors?
Correct
When I record with camera connect on my iPhone it doesn’t record the drum machine, is it possible?
I don’t think so in this case
Hello, Would I get better sound quality if I connect the Nux MG30 to audio sound card and record, or should I directly connect it to the computer via USB for better recording quality?
A direct USB connection would be best.
What is the app to record the audio and also the nux mg30
I’m my case I was using Reaper
Hi very useful videos thank you. Question:
- Can I sync my daws midi clock with the mg 30 via USB? (So th mg30 match the tempo with my daw for delay for example) Thanks!
I don’t believe the mg30 does clock sync.
@@ThePedalGuy Thank you, sorry to hear that. Is there any way to do that? Like a midi 5pin to USB adapter?
@@whatsupchicken unfortunately no. There is no midi cc available for that parameter
@@ThePedalGuy I see. Thank you my friend!
When I load a backing track, it plays with a lot of static. No matter what I do in my DAW, the static is still there. Is there something special I have to do with the MG 30 when using it as an interface?
Sounds like it could be a buffer setting on your DAW. Have you adjusted it?
@@ThePedalGuyHey thanks for answering so quickly. I actually bought my MG 30 from you. I love it. Yes, I tried everything. I have a friend with the same DAW. He tried to help but we still can't get the static out. I've ordered an audio interface to check it. It will arrive next week. It's really strange.
Dude I just watched this and i did everything but i still find a LOT of latency when i use my nux with my neural dsp plugins, could you try it out and let me now if you could rectify it?
Can we also use it to record on a mobile phone?
Not that I'm aware of.
@@ThePedalGuy Thanks for the reply sir. I don't have the cash to buy this processor but one day for sure I will!
Thanks for this. I use the Steinberg UR22 hardware interface and Garageband. Do I take the 2 outs from the NUX 30 to the 2 inputs of the Steinberg UR22? I am receiving my NUX this week and would like some suggestions. Thanks in Advance.
THANKS FOR SHARING!!!!
Glad to help.
Is it possible to use Mg30 as an audio interface only? do I have to remove all the effects and amp sim from the chain? thank you.
Thanks for sharing. I can't figure out how to use the mg 30 with other plugins, is this possible ?
Not following what you're asking for here. Are you asking if you can reprocess your tracks recorded with the MG-30 into plug-ins? Please be specific.
Also keep in mind that this video is from last year. The latest version of the firmware supports a dry/wet for using plugins in a daw
So basically what I am asking is, if I want to use another plugin such as Neural etc is there a way to completely bypass quicktone and use the mg30 as a simple interface. I also wanted to use a plugin tuner as it is more efficient.
I was also looking to use an IR loader plugin to test various IRs more rapidly.
Hope this makes sense !
Hello sir, what recording software is that caise i bought mg 30 and want to record some
I use Reaper
Ok, when I record reamping to another track - what is the difference between outputting to Output 1/2 and outputting to Output 3/4? Is the signal in Input 1/2 any way different in these two options? Would it be bad recording reamped track using Output 1/2? I can hear no difference - this is why I ask.
It's been a year, but if you're still interested in an answer: If I don't misunderstand your question, the only difference is that Reamp Input 1/2 - Output 1/2 overwrites the previous dry track with the new reamp, while Input 1/2 - Output 3/4 records the new reamp track to Output 3/4 as the name suggests, so you get a new track without deleting the original (as long as you've also assigned the corresponding Output 3/4 to your DAW on another track). It's just a way to make sure you keep your dry track, there is no difference in sound. That's why I prefer the dry-out method with the wet signal on 3/4, because it creates two tracks at the same time, I can jam with my favourite effects chain and if I want to change something with plugins or whatever, I can still do that because I still have my dry track there. It's just more practical to me.
@@Drumming_Monkey Ok. I think I understand the difference.
The recorded music through reamped 1/2 and 3/4 with dry 1/2 would be the same - it will be the original recording after applying the current NUX MG-30 settings.
The difference would be what goes to 1/2 outputs while recording. With wet output 1/2 will be with effects applied, with dry - just the original.
I think it would be useful, if we want to do something else with the original signal *during* recording.
Thanks for your answer! 🙂
@@piotrrusk No problem, glad I could help.
Hi! Can you use the MG 30 only as a audio interface? I mean to use another plugin like Amplitube for example. Thanks!
Yes
@@ThePedalGuy How?
@@alejandromacdonald6203 Just turn off all the modeling in the MG-30 and use it as an audio IO. That's it
@@ThePedalGuy I can't seem to get that solution working - My actual amp (THR10)'s tone which I can hear clearly after switching off every pedal/amp on Quicktone except for Noisegate. But what comes out of Audacity recording is a dry tone with no effects at all.
How do i get Audacity to record what I'm hearing (actual amp sound + Noise gate from Quicktone)?
i've a question, i have a mg300 and checked loopback make a bad noise, is wrong or no is possible?
Loopback can be tricky.
Can an android phone used as recording using Nux mg-30? And if yes what software to use and how to configure? Can Nux mg-30 be uses as audio interface just like Nux mg-300?
I haven't tried to use it as an interface.
@@ThePedalGuy i tried a while a go. I use 2 channel mini mixer which i bought on online store. It's yamaha M4 mixer. Then i use open camera app on play store which i downloaded. Set the auio option on settings on open camera then that's it i figure it out. Mixer serves as audio interface i guess because you can also connect to a Desktop computer and it also work but the disadvantage is it has a humming sound because the mixer need a 5v 1amp or 2amp power source. But if you use 5v 1amp or 2amp power source there's no humming sound or unnecessary sound.
@@ThePedalGuy what audio interface you use and what camera you're using?
Ah I'm sorry maybe my comment would have been better placed here instead of the other video, so I'm posting it here again in case others may have encountered the same issue and can help: I'm incredibly frustrated right now. My MG30 won't send a signal to my Mac over USB. I'm in Studio Direct Mode, I can switch through my patches and Quicktone responds, so there IS connectivity, but no Sound comes through. Mac shows the MG30 is connected as input but doesn't get signal, Reaper doesn't get a signal as well. When I connect my headphones to the unit I get sound but nothing will get sent through to my Mac. It is driving me nuts at this point. Can you give any advice? I already re-installed the driver on the MG30, Quick-Tone, everything. Nothing works. I'm out of ideas...
Thanks for sharing, great Vid. Would you happen to know why, when I connect to my DAW (Cubase) using the USB and Nux asio drivers, the playback speeds up, I.e., the tempo is faster than what the DAW is set to?
Thanks. Could be an issue with sampling rates.
@@ThePedalGuy okay thanks will check it out and see 👍
Hi. First say, the best pedal guy ever🤟🏽
Just a problem and hope you can guide me. I connect the mg 30 to my Daw, I use FL Studio. And though I hear and see the signal of the guitar on the mixer, it hardly reaches - 15 dB. I've tried everything, but cannot manage to rise the input signal. 😢
I would need to look into that further as I haven’t use FL studio.
Hi, first thank u so much for making this videos.
Second, I have a question, my dry signal its really low, even though my volume is at the top. Do u know why and how to fix this? And when I try to record the drummachin within Reaper, my track does not work,it freaks out.
Thank u!
Hi. I'll probably need to do a "part 2" of this topic to try and answer these questions.
How to route nux 30 to laptop?
can it work on midi vst instruments vis usb?
Hey Hello. I have a question. I recently bought nux mg30. I tried it with earbuds mp3 headphone and the sound is very bad. I download the same preset, it sounds great in video, but it sounds very bad in me. i use squier affinity strat but i dont think the problem is guitar. Would buying a reference headset or monitor work? I want to buy kurzweil ks40-a, will it work? thank you
Hi ! if I use my DAW cubase and the USB for the Nux MG30. how the track is loaded ? do I need to create a track or is it automatically done with a function ? (and by the way, is look like a stereo track as is showed in your video)
Well you would select the MG30 as you’re audio device in cubase, create a stereo track and that should do it.
Keep I mind that every daw has its way of working and it’s been years since I last used cubase so you’ll need to refer to the cubase manual to be sure
@@ThePedalGuy thanks for your response...
It can be useful if I choose USB mic and keyboard for a recording.. even if I think the analog connection must be the solution, without using 2 external sound cards device for the same project... except If I can plug the mic in the Nux Mg30 and bypass the guitar effects...
@@Dami1rush Sure you can toggle between them if you'd like. I would just suggest that if you're going to record the MG30, do it via USB rather than plugging it into another audio IO.
@@ThePedalGuy why? Because the quality of the recording or the option of recording?
@@Dami1rush because you will performing an additional analog to digital conversion otherwise. It’s unnecessary and will introduce noise into your recording
Awaiting my NEW NUX !!
HOW can I get a MOOG SOUND?
Not sure what you’re trying to do here.
Does it allow you to send the audio output to another device when you're recording or do you *have* to use the built-in headphone port to be able to listen to both your guitar and whatever's playing in the DAW?
Thanks!
Can we use it to use vst plugins like amplitube?
It can be used as an audio IO which can be used in a DAW with amplitube but I haven’t tried it that way yet.
@@ThePedalGuy oh..thanks
Hey PDG, can't make Dry/Wet records in Cubase Elements 9, any idea on how to achieve that?
Nevermind i figured out! thanks!
Hi! Great video! I just wonder have you ever tried recording the NUX MG-30 with the GarageBand on an iPad using usb cable (in my case it’s usb-c to usb-c cable, since I’ve got 2021 iPad Pro)? I don’t have the MG-30 just yet, so can’t really check it myself. Just trying to figure out if such a way of recording would work! Or would I also need an audio interface? Thanks!
I’ve heard you can but I have not tried it myself
Hi Pedal Guy What cable did you use connect PC and the MG?
There is a USB C-A cable in the box
GarageBand iPad?
Which daw is being used? Im completely new to this, would absolutely love some guidance😅
it's called reaper and it's kind of a free daw
Hi Pedal Guy, thanks for your video! Now I understand how it would work, but my CUBASE LE does not recognize the MG 30 as interface if it is connected only wiht USB C to the USB Hub of my computer! What DAW do you use? Do you have any clue? THX
I use Reaper on a PC and it works fine. What is your cpu? Hubs don’t typically work that well.
Good morning.
My mg30 connected with a usb3 port make an incredible noise.
Tu reduce that at the minimum i found that a 5mt long cable and usb2 port helps a lot.
Asio driver are preatty crap. In a dow once the input focus are on it the noise raise up. Any clue about that? Any solution as fae as you know? Btw you are an ansome guy and thanks for the channel.
Thanks for watching. I feel the driver is pretty solid with the right conditions. I've been working heavily in ASIO since the late 90s so I've come across many horrible ASIO drivers. The main issue I've run into here is using it with a hub doesn't work so well. Also, making sure that your wireless and bluetooth are disabled. This is if you're working with an off the shelf PC like the HP i've used in most of my vids.
Hi Pedalguy, i am new at this so here goes a question for you. I wonder if i just need to plug the Nux to the PC in order to record the audio with Reaper software or i need to set another stuff ?
You can record your guitar audio into reaper with the mg30 via usb
You need the nux ASIO driver
Thank you for the video. what is software that you're using to record the sound of the guitar?
Thanks. I'm using Reaper.
I'm on the fence on getting this device. The one question that remains for me is: does it send midi messages through USB?
Yes it receives Midi
@@ThePedalGuy alright but does it send MIDI? Can I assign the expression pedal to send CC messages to Reaper for example?
@@ToxicHumanCorporation not that I’m aware of
how to used it on Ableton Live 11
Thanks for the suggestion
what DAW you are using?
Reaper
Hey Dude, really like your channel. Due to you, I'm looking at the Nux MG-30. You promote the USB section, but for someone like me that has no hands on with this unit... Can you maybe do a little connection video, or at least tell us what we need to connect to the MG-30? for PC... Is it USB-A to USB-Micro, IS it USB2 to USB"C"... I have tons of cables but nowhere in the specs does it say what the exact USB cable is. Thanks
Keep rockin.
Usb C
RECORDING SOFTWARE NAME PLZ
Reaper
What software is this?
Reaper
@@ThePedalGuy Thank you so much. And which software to use for downloading or editing effects of MG-30?
@@ThePedalGuy By the way I just bought it yesterday and watching your channel for guidance. Your channel is really helpful.
Do a preset of poison foto nux mg 300 please
Not sure what you mean. You want a Poison preset?
SUPER!!! :)))
Many thanks!!
Are you able to record vocals through microphone only? basically can NUX MG30 act just like a plain DI?
Probably. You'll need an impedance transformer like I did with the MG300. Here's how that came out ua-cam.com/video/mK2MYF0TSFU/v-deo.html
Thanks for the video! Love my MG-30!..Am I able to edit live while reamping (before it actually records the track)?
Yes that should be fine
Hi Scott - great video again - thanks! What DAW are you using?
Thanks. I'm using Reaper
@@ThePedalGuy Thanks Scott, I'm looking for an uncluttered DAW for a friend and Reaper may be the one. Would you recommend it for a beginner?
Is it possible to record using the mg30 as an audio interface while using the 4 cable method with an amp?
what daw is your using?
Typically, Reaper is my goto DAW