TUTORIAL SOLIDWORKS | activate realview graphics
Вставка
- Опубліковано 15 жов 2024
- in this tutorial i'll show you to enable/active real view graphics funtion on solidwork. active real view will help display entity more real, better looking
Pls drop out your comment in comment box for any question, thanks for watching and pls subs for my channel to get more helpful video
To those struggling with this, I couldn't get this to work following the exact steps in the video either. I did eventually manage to get it to work though. I managed to get to work by following the steps in the video with some changes:
1. Firstly, I am running an RTX 2070 SUPER, and my SOLIDWORKS version is 2020
2. I did NOT put the new key in the 'Other' folder, I put it in the 'NV40' folder
3. I DID name the new key exactly as my graphics card was named in the Graphics>Hardware>Current folder. For me it was 'GeForce RTX 2070 SUPER/PCIe/SSE2'
4. I DID add a new DWORD(32bit) Value called 'Workarounds' in my new GeForce RTX 2070 SUPER/PCIe/SSE2 key
5. In my SOLIDWORKS 2020, there was a pre-existing graphics card in the 'NV40' folder called 'Quadro RTX'. The existing Quadro RTX key has a DWORD(32bit) value of 32408. I used this data value (32408) for my new 'GeForce RTX 2070 SUPER/PCIe/SSE2' key that I created for my graphics card.
I think the key to getting this to work is to try to find a graphics card that is similar to yours, that already exists in the registry, and to use it's DWORD(32bit) value.
Hope this helps!
P.S. I am running a 64 bit system and still used the DWORD(32bit) Value.
followed same steps as you did, thanks!
(I have GeForce GTX 1060/PCIe/SSE2 running SW2019 on windows 10)
thanks, followed same steps for Gtx 980
Thanks a lot, followed the same steps for GTX 940 MX
THANKS!!! works for rtx 2060. just followed exact steps
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
Thanks! It was quite hectic for AMD users but finally, it worked!!
For AMD Radeon R5 M330 Just follow the procedure as...
Go to R420 create a folder with respective Graphic name as copied...
In workarounds insert 40008
Job Done!!
thanks for comment my friend!
Thanks bro it works..
thanks mate
you're welcome my friend!
worked for me prashant!thanks
Sorry with my pc don't work, my hp laptop use an AMD Radeon(TM) R5 M430, which serial number i can use for sw2018?
I'm having also same issues
For my AMD radeon m260 card i followed the same steps but i did not put it in the 'other' as shown here. I went and did it in the R300 Folder and used the value 30008 and it worked. I tried it in other folders and it didnt work .
Wow thanks you man, that works for me too, I think it's becose we have a AMD radeon (sorry for the spelling, i'm french).
yeah,it worked for me. for AMD users
Thanks mate it worked for my amd Radeon r5 m330
Thanks Brother !
Thank you it worked for me, I have AMD Radeon RX 5500 XT and put it under folder R420 the value 32408
I Have GeForce MX150/PCIe/SSE2 Graphic Card on windows 10, 64bit, Solidworks 2019. Created a new key in NV40 with the Hexadecimal value 30408.
Works perfectly (Also does with value 31408)
Thanks. Very helpful
thanks for watching my friend!
Did you create DWORD32 bit or 64bit?????????plzz helpp
Its working thak you so much bro
Any idea why it isn't working for me ? I have an "GeForce GTX 1060 6GB/PCIe/SSE2" and Solidworks 2018 64bit running on windows 10. I tried 40406, 40408, 30406, 30408, 31406 and 31408 but nothing is working. I hope you have an idea what can be wrong.
For Nvidia users make the new key in NV40 directory insted of the one here shown in this video.
GeForce MX130/PCIe/SSE2
run ---> regedit ---> HKEY_CURRENT_USER ---> Software ---> Soildworks ---> SOLIDWORKS 2018 --->
Performance ---> Graphics ---> Hardwear ---> go to current and double-click on the render to copy your graphiccard --->
GI2Shaders ---> for AMD Radeon (TM) HD 8500M/8700M choose R420 ---> right click on it and select new key --->
past your graphic name on the new key ---> click on AMD Radeon (TM) HD 8500M8700M and right click on new DWORD (32 bit ) value
---> rename as Workarounds ---> right click on the Workarounds and choose modify ---> type 31408 or 30008 or 40408 or 40008 or 60408 or 60008 or 30408 .
for GTX 1060 Use NV40 and use 31408
i have GTX 750 Ti, used NV40 with 31408 and it worked perfectly, thx
Thanks bro! It works!!!
Can't find 31408 under NV40. Help pls! Thank you!
@@stephenrodriguez1347 dear my friend u cant find this 31408 u will enter this number on the modification for workarounds file , please follow my procedure as well and also check you're graphic cards for last updated u will fix it correctly . Feel free to ask me any questions
Best regards
thank you so much
This tutorial is very nice sir
For those who are using Radeon RX Series, try to go to GI2Shaders>R420>Your Graphics Card seen on Renderer and use the value 40008. Hit like if it works because it works for me.
It worked with a Radeon RX 580. Thanks a lot bro
My graphics card is Intel(R) HD Graphics.... What value should I use??
I have an Nvidia "GeForce GTX 1070/PCIe/SSE2", and placed it in NV40, and used value 30408, and it worked. Why the hell do we have to do this anyways? this is so stupid
same bro
@diggy pigger I CANT SEE CURRENT FOLDER IN 2019 WHAT SHOULD I DO ..PLEASE REPLY
It didn't work for NVS 5200M/PCIe/SSE2. However the 'RealView Graphics' option is visible now. I had to create the Key in 'NV40' folder instead of 'Others'. I tried values, 31408, 30008, 40406, 40408, 40008, 30408, 60008, 60408, 80008, 80408. But it is still unsuccessful.
hey dude, im the same of you, didn't successful
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
I use GTX 750Ti
Created folder under NV40 and value as 30408 it worked.
Thank you.
What other values can I use... Because these ones didn't activate my RealView!
Nvidia "GeForce GTX 850M/PCIe/SSE2", and placed it in NV40, and used value 40000, and it worked.
It's not working bro can u help me
GeForce GTX 1650/pcle/SSE2
@@ShivajiRavula
Try so set value 40008 or 30008 maybe?
I use GTX 1080Ti
Created folder under NV40 and value as 30408 it worked.
Thank you.
I've a GeForce 940M/PCIe/SSE2 and I did everything in this video, but the realview icon still disabled, what can I do? I did this before on my 2016 version and worked perfectly, now that I upgraded to the 2019 version, is not working.
Actually, I managed to make it work reading other comments, I had to put the card key in NV40 and the value I used was 31408, since I tried to make it match the value of the folder named Quadro M.
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
it works for me. my graphics is Nvidia GeForce GTX 1050 & i used value 31408. thanks Bro...
hey, i have the same graphic card, i did it but the real view doesnt show me materials like shiny metal or woods.. i tried to open this file with the graphic card name in NV40\ Others (Real view appear only when i create the file into NV40), does it work good for you?
I have Lenovo Inte(R) HD Graphics 630. this method worked on my HP laptop. How do i use it on my Lenovo? Kindly Help
My friend told me Realview only for QUADRO card then he bought p2000, and now i make that work on my GT1030, i have to show him , Thank you very much master.
Hello, how can I know which folder under "GI2Shaders" I have to use. I googled and find like 10 different answers, some make a new folder/key under "NV40". Some make one under "R420"... It's confusing. Also I notice in this video that some keys are made and then back deleted. Uhm??? Then there is a folder "V001_FG_R1018144156" automatically created and not deleted anymore... why? Isn't it important then? I'm worried that I'll mess around in some important settings of the system and then my computer will make problems.
But first I don't know sure which graphic card I have. When I run "dxdiag" I find at "screen1" & "screen2" the "Intel(R) HD Graphics 520". But at the tab "weergeven" (in dutch) -> i find the "AMD Radeon (TM) R7 M360". The sticker at my laptop says aswell "AMD Radeon Graphics". But then being in the "regedit" whatching under "Current >> Renderer" I find the "Intel(R) HD Graphics 520". Probably that's the correct one but still confusing because I find different results... (I prefer to be sure 100% before starting to mess in the system settings). Then going on.... under "GI2Shades" >> under which folder I have to make a new key? And what hexadecimal value I have to use, because therefor I also find many values... (30008 seems to be the most used).
Thanks for helping me out.
there're many vendor of Graphic card, if your laptop was build with Intel so you must create key value into Intel folder and if your VGA is Ndivia so create into NV40 and so on, i guest your laptop was build with 2 Graphic card and it works independently, your main graphic card should be AMD radeon , so pls go to AMD redeon graphic group and create folder there with same value with other AMD graphic, thanks for watching my friend!
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
GeForce GTX 1060/PCIe/SSE2 this is my graphic card but its still shaded, what to do? i also tried 80408, not working
Same
Have done then inform me please same problem faced
same here
make "GeForce GTX 1650/PCIe/SSE2" Key File in NV40 and use dword- 30008. It will work as have also the same model.
@@vishaljha6939 what about 1050ti ? And 2020 version of solidworks, it worked when i had 2019 version, but now it isnt working
I'm using Intel(R) Graphics 520 on my computer at work, what value should I use? The one you showed don't work for me.
I tried today with "30408", I have the same graphics card, and it worked well!
Sir you're really a SolidWorks GOD. From last 1 year I'm trying to on RealView from watching various videos and tricks but nothing worked. some of friends suggested to buy 20k plus Graphics card to on RealView, but you saved my savings. THANK YOU SO MUCH SIR 🥰🥰
bhosdik, madarchod sabka ho raha hai. mera e khara nehi ho raha
Thank you for the video it helped. I have Ge force GTX 1050 and created folder in NV40 and used key 30408 and it worked
Glad it helped
Thanks a lot, if you are Ge force GTX 1050, this advice works
Thanks Br it worked for my 1650 super
Thanks alot, this worked for me👍🏻
Tytytyty
HI, I have Intel(R) Iris(R) Plus Graphics 655. What is the value to use and in which subfolder to make new key ?
Hey, Did you find any solution? I have the same and can't find much concerning this card...
Hi @@PiNeirinckx, i have got it to work with 4000080, but i have SW2016, SW2017 & SW2018 all installed and have different numbers. So here are some alternatives (1000009, 10000010, 4000480 & 4080080). It works when displaying parts and assemblies in Solidworks, but while browsing for files the icons of the different parts does not show correctly. I seem to remember i needed to close down the PC completely rather than a restart to get it to work. Home it helps. Peter
@@peterwang3052 Hey, thank you very much for your reply. I tried them all but none worked (I have SW2017), even after full reboot. Any idea why? :/
Hey there. May I ask which code you used for Solidworks 2017? I Still cannot get it to work... Thanks in advance!
@@PiNeirinckx i used 10000010
I'm using GeForce GT 705/PCle/SSE2 and this method is not working for my PC, So, which one works
Does it works with new rtx cards such as rtx 2070 , rtx 2080 ,rtx 2080 ti
Good evening Master, I have SolidWorks 2014 and Intel(R) HD Graphics 3000, I have already used 40000, 30408, 31408 and 4000080 and they are not working. How should I proceed? Which Hexadecimal value?
do you exist any solution for your problem...I have the same computer and the same specification .. I apply the all steps in video put the real view in wiew tab not apper?
If you have a GeForce GTX 1050/PCIe/SSE2, make sure you create the folder under NV40, not Other, and the value is 30408
Man. Thank you.
Thanks for that!
SOS Grosso Sabelo!
still not working for me. :(
Lifesaver, thanks so much
Just rename any nv40 file in the regedit to the make of your graphics card works fine. thanks for the video
yes this worked for me
this worked for me, too
Realview 3D doesn’t even pop up under that display tab in solidworks. Its also just greyed out when I go to “view” then “display”. Nothing works and I dont know why
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
So perfect sir
I have mx 150 what value should i apply????? Plzzzz help and i have 64bit os windows 10
Good evening Master, I have Intel(R) UHD Graphics 620, and it is not working. How should I proceed? Which Hexadecimal value?
pls try to create new key with value "4000080" in intel folder, thanks for watching friend!
Hi! Sorry, I've Radeon Pro 555x so what is the value to use and in which subfolder to make new key ?
go to GIshaders->R420-> create subfoder (input exactly graphics card name)-> 30408 value, pls try and feedback the result, thanks!
It works! Thank you so much :) Another little question: do you have a forum about solidworks?
Sorry again, it's normal if with realview graphics some object face are very dark? Or maybe i should try with a new value in the subfolder? @@Solidworksmaster
it's normal, change the value might not deal with your problems. thanks my friend!
It says that my graphics card is GDI Generic. What could be the problem? And do you know how can i fix it?
Sorry, If I'm using x64 windows will select QWORD (X64) value or the same for X32??
just select X32 no matter OS 64 or 32
@@Solidworksmaster thanks, works perfectly!!
Nailed it!! 40408 Thank you!! - Update. Limited results : [ - I'm using a new Mac Pro / Parallels with tons of RAM and two AMD Radeon Pro Vega II Duo 32 GB graphics.Small simpler parts and assemblies work well. Unfortunately large complex assemblies do not. Thanks again for posting this.
This process is working in my solidworks 2022. Can you help me out?
I have Radeon graphics card andafter hours and hours of search finally i activated my RealView. Thanks a lot sir! :)
it's sound great, thanks for watching my friend!
Good evening Master, I have( GeForce 820M/PCIe/SSE2 ) , and it is not working. How should I proceed? Which Hexadecimal value?
pls try ,put your graphic card name and the value(30408) into NV40 not others, hope it work for you!
@@Solidworksmaster thank you it works now
please GeForce 920M/PCIe/SSE2) and it is not working with (30408) in NV40. Can Help me?
Got Win10, 64-bit system running SolidWorks 2017 Education Edition. Got GeForce 610M. Wrote "GeForce 610M/PCIe/SSE2", inserted REG_DWORD named "workarounds" with value 40408. Worked for me.
It work fine in Intel iris Xe 😉
And its look super cool also, Thx bro u are genius 😍👌
Glad to hear that
Where did you create the file? It isn't working for me
This works very well for Intel graphics card
My is not working i need help. i am using MSI GE62 QF apache pro with NVIDIA Geforce GTX 970M.
grabcad.com/questions/how-i-can-activate-real-view-graphics-in-my-solidworks-2015-x-64-bit-sp2-my-operating-system-is-windows-7-x-64-bit-sp1-and-my-graphics-card-is-amd-radeon-hd-7500m-7600m-series-i-have-already-tried-realhack-3-9-1-but-it-is-not-working
Hello Solidworks Master, My Graphic card is Intel Eaglelake. Also, I'm using Windows Vista. What is the value for x32?
My lappy is of 64 bit so should i select 64 or 32... I am confused
no matter 32 or 64bit, just select 32, thanks for watching my friend!
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
Lenovo G40
AMD Radeon R5 M230
R420
Workarounds value = 30408
(it works!!)
what about the AMD Radeon (TM) R5 M320 graphic card . what is the number which i should write in Workarounds in hexadecimal
Every VGA card has specificly value, you just try to fake them by double click to specific VGA is listing was support by Solidworks, then go to items workarounds => double click to see what's value they put in , then copy them to you graphic card, just try one by one until they work well, i hope it will work for you, thanks for watching friend!
for AMD Radeon (TM) HD 8500M8700M used R420 with 31408
This worked for me, had to do a variation of the method used by the RTX user below me. Just put your graphics card key in NV40.
Per a link found on solidworks website:
1.) Open up the registry editor (Start Button -> Run... -> "regedit")
2.) Navigate to "HKEY_CURRENT_USER\Software\SolidWorks\SOLIDWORKS 2015\Performance\Graphics\Hardware\Current"
3.) On the right side doubleclick on "Renderer"
4.) copy (Strg+C) the Value
Since I have a GeForce Card mine is "GeForce GTX 970/PCIe/SSE2". Yours will be different, mentioning an AMD card. It is important to copy ALL what's in value.
5.) Navigate to "HKEY_CURRENT_USER\Software\SolidWorks\SOLIDWORKS 2015\Performance\Graphics\Hardware\Gl2Shaders\R420"
6.) On the left side (the treeview) rightclick on "R420" and choose "New / Key"
7.) Rename the new key with the copied value (Strg+V)
8.) Click another Key and back to your newly created to make sure you are editing the right values. The right side should be empty but an entry (Default) whose data is "value not set"
9.) rightclick in the right side and create "New / DWORD (32-bit) Value"
10.) Rename the DWORD to "Workarounds" and, after that, doublecklick it
11.) Leave the "Base" to "Hexadecimal" and enter 30008 into the field "Value data"
12.) Leave the Registryeditor open and start Solidworks. Create a new part / open an old one and try to enable RealView.
If RealView is still greyed out:
13.) Close Solidworks and go back to the registry editor. Doubleclick the DWORD "Workarounds" and change the "Value data" to 30408
14.) Fire up Solidworks and try again to activate Realview (Part or Assembly open)
EDIT: A useful post by another user on the subject
"For anyone looking into doing this, be sure to add the new key (in steps 5 and 6 of Leucetius' answer) to the correct folder for your graphics card. You will probably need to find the equivalent workstation card to your graphics card, then find that card's folder under GL2Shaders, then add your new key to that folder. For example, I have an Nvidia Geforce GTX 560, which uses the Fermi micro-architecture. So I Google'd the Quadros, and found that the Quadro 600, 5000, and 6000 are also based on Fermi, and those three Quadros are under the NV40 folder in the registry. So, for steps 5 and 6, I used "NV40" instead of "R420".
In short, "R420" is specific to the original poster's card, you will need to match your card to the proper folder."
Will it work fot GeForce GT 820M ? Please tell
@@kushagrakhandelwal7524 yes this should work for your card :
1) Open regedit.
2) Go to HKEY_CURRENT_USER \ SOFTWARE \ SolidWorks \ SOLIDWORKS 2017 \ Performance \ Graphics \ Hardware \ Current
3) Double click Renderer and Ctrl-C (copy) the data string (Mine is "GeForce GTX 1070/PCIe/SSE2)
4) Go back up to Hardware Folder \ GI2Shaders \ NV40
5) Right Click NV40 -> New Key
6) Ctrl-V to paste your hardware string into a new key.
7) Click off and Click back on your new key to make sure you're editing that one.
8) In the right hand window pane, Right click -> New DWORD (32-bit).
9) Leave it as Hex and enter 30008 as the value.
10) Before closing regedit, open SolidWorks and check to see if RealView is enabled.
make sure you close and reopen solidworks after
it worked bro thanks
Why my "Realview" icon name is not black in my SW ? And after i practice your videos that's not working
that's mean you did not done it in right way, pls watch and reaction again, thanks!
Hello friend mine is a GTX 1650 Ti GFX. Not working any idea??
Did you find solution ?
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
80408
Hope you can help me! I tried everything but no succeeded. My Pc is windows 10 pro 64 bit. My graphic card is Asus R7 265 and Swx is 2018. I tried every number but i could not make realview active. What can you advice to me?
what's exactly Graphic processor name you put in? don't tell me you put the name card as Asus R7 265.
@@Solidworksmaster I wrote the folder name as what is written in the renderer value which is Asus R7 265 :). So I wrote "Asus R7 265" as the value.
is there graphics card necessary to do this..?
Hi! I need help it didnt work for AMD Radeon R7 M260 solidworks premium 2018 x64bit windows 10
run ---> regedit ---> HKEY_CURRENT_USER ---> Software ---> Soildworks ---> SOLIDWORKS 2018 --->
Performance ---> Graphics ---> Hardwear ---> go to current and double-click on the render to copy your graphiccard --->
GI2Shaders ---> for AMD Radeon (TM) HD 8500M/8700M choose R420 ---> right click on it and select new key --->
past your graphic name on the new key ---> click on AMD Radeon (TM) HD 8500M8700M and right click on new DWORD (32 bit ) value
---> rename as Workarounds ---> right click on the Workarounds and choose modify ---> type 31408 or 30008 or 40408 or 40008 or 60408 or 60008 or 30408 .
for GTX 1060 Use NV40 and use 31408
I have intel (R)HD graphics 520 what the velue I need.??
I am using intel UHD 630p (integrated), but none of the workaround values are working, Can anyone help?
I have AMD Radion R7 M360
Can any body guide me will it work or not
Should i buy laptop with this graphics
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
@@i-tit5474 tnx sir
@@BeWithWasif101 You r welcome:)
I do a bit of pc programming:) Glad to help.
What that 40406 value is same for all OS and processor
I use Nvidia GeForce 940mx/PCIe/ssE2 40406,40408 ( sw16)
Not working pls help brother
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
NVIDIA GeForce RTX 2060/PCIe/SSE2 ?
what about for Intel(R) HD Graphics 2500 wit 8GB ram?
bro thank you very very much i am having radeon r5 graphics and the R420 31408 method works fantastically ...... God bless you !
thanks for watching my friend!
40406 activate real view but 40408 just gave better real look..thanks a lot..
Welcome 😊
Is that for Radeon TM 520? If not then what value for that
I use surface pro 5, intel iris plus graphics 640. I can't find the "current" folder. Help 😭
Current folder just for you reference your graphic card, try to input " Intel Iris Plus Graphics 640" then see how it work
Solidworks master already search, not there. Intel folder only present intel iris graphic & intel iris pro graphic. Is it because the iris 640 not approved by solidworks?
yeap, pls try follow this step: go to GI2shaders -> other and right click-> new-> key -> input exactly " Intel Iris Plus Graphics 640 " then go to next step until finished then see it again, i hope it work for you!
Solidworks master i'm on it, my system on 64 bit. So i should click QWORD (64-bit) Value. Right? And the value i add should be the same as in video or not?
no matter 32bit or 64bit, just do exactly the same what's i did in this video, good luck!
i got AMD Radeon(TM) R8 M445DX , didnt work ,can u help?
I have AMD R5 M250 not working for me as well. If you get to know please let me know as well
@@johnywesco4143 well i downloaded realhack 1.5 and run it and now it works perfectly. Google it.
What about intel (R) UHD Graphics 660 & what's the value for it .. please help
same bro
same setting will apply on it
Not working
Hi can anyone help for my GeForce GTX 1050/PCIe/SSE2 , I use Solidworks 2018, tried some of the stated in the comments but does not work for me...
I tried this. It does not work for me. GeForce 940MX/PCIe/SSE2.
Now it works. If you create new key under NV40 for Nvidia , it works well. Try NV40.
MAKE SURE YOU TYPE A CAPITAL "i" not "L" in PCle!!
@@fatihcemalcan3280 Thanx a Lot !
@@SilentPoop thanks. It was not working for me because of this
GeForce MX150/PCLE/SSE2
And 64 bit
How I activate it
ua-cam.com/video/RJlep_QS4fQ/v-deo.html
watch that video it will help you what you have to do is same process but not in other but in NV25 & assign value 30008
I can't make this work sir, I have AMD Radeon HD 8500M. What value should I use? Waiting for your reply sir, thank you!
why don't you put into R420 with value 30408, pls try and tell me result, thanks!
@@Solidworksmaster
what's R420 ? is it the workarounds
No , that's just a folder, i copy the comment of other person for you reference=> For those who are using Radeon RX Series, try to go to
GI2Shaders>R420>Your Graphics Card seen on Renderer and use the
value 40008
@@Solidworksmaster thanks sir. It works! Im using AMD Radeon R6 Graphics btw
@@Solidworksmaster ok Iwill try that
it seems like if you have any type of gtx card, you want to create a new key under NV40 and set the "Workarounds" value to 30408
I love this man. it's AMAZING!!!!!! Thanks
Thank you so much, it looks amazing now
I tried it in 2021, it's worked
Thanks brother it's working ❤️❤️❤️!!!
Welcome 👍
I have solid works 2013 x64 edition it's not working.
ua-cam.com/video/8o_RZnKrye4/v-deo.html
How can I do it with a gdi generic?
Same problem ...
doesnt work on GeForce GTX 1650 with Max-Q Design/PCIe/SSE2 please reply asap
i have the same card. try creating a key in NV25 folder with the value 30008. it will definitely work. cheers
Works too for GTX 1060 with max Q design
@@vishaldubey1169 I'm so glad i saw your comment dude thank you so much
@@sakochaprazian6268 :)
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
do I lose the guarantee?
I follow this step but not work in my Pc with 1050Ti Nvidia 4gb ddrt. 3rd gen i7. Solidworks 2018
bro make the nvidia 1050 key folder in NV40 directroy insted of the other directory tree. I have 1650ti Nvidia and it worked for me,
@@dhruvlal6545 ok I will try. Thank you
@@dhruvlal6545 so i have to click N40 folder and then add new key.
@@dhruvlal6545 There is only NV 30 AND NV 40 FOLDER. AND WHAT IS THE NUMBER OF VALUE DATA ? PLEASE REPLY
@@harvijaysinhgraj5917 yes you have to click N40 folder and make the new key. Rest of the procedure is same as shown in the video
Thank you for such valuable information ❤❤❤🎉🎉
Glad it was helpful!
I really appreciate it
From now on when I use solidwork I really feel very awesome and I get some extra motive to work with it 😍
Quadro Quadro Quadro...all Quadro is no work? i test the way in NVIDIA GeForce 1060 is no problem. but in the Quadro1000 i try anytime. no work
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
@@i-tit5474 i Upgrade the driver and the problem is solved
Nividia Rtx 2060 users make key in NV40 and enter 40000 as the number
Thx
I use it for solidwork 2013?
yes, pls try!
@@Solidworksmaster I tried, but failed, but "RealView Graphics" is unknown. Thank you for answering me!
It didn't work for me ..... I have Intel(R) HD Graphics salmost same as yours ........ Solidworks 2018 and i have tries around 20-30 videos but nothing worked ! Please Help me master !
i suppose you missing something , what's your OS version? Pls review again and retry carefully step by step even try to reset OS and reinstall Solidworks, it's should be work fine.
@@Solidworksmaster I have Windows 7 Home Premium- Dell Laptop 2009 model and SOLIDWORKS is installed correctly but just the realview graphics option isn't available .... I amn't able to differentiate between different materials and their surface type...... Please help me Master 🙏
This Works: ua-cam.com/video/z-PZ0E_ai8M/v-deo.html
I have an Intel(R) Iris(R) Plus Graphics 655 - None of the frequently mentioned codes work... Anyone can help me? :)
Couldnt get it to work on my dual partition macbook with the 2019-20 solidworks but thank you for the video
GeForce GTX 1650/PCIe/SSE2 . It doesnt work !!
ua-cam.com/video/RJlep_QS4fQ/v-deo.html
see that video it will works what you have to do is just do the same process in NV25 & assign value 30008
@@nihalsardar6833 1650 S - don't work
@@FRYblin don't know than sorry
GeForce GTX 1050/PCIe/SSE2, and created the folder under NV40. still not working for me. please help!
it's should be work for, pls try step by step again and try other way to get it, thanks for watching my friend!
@@Solidworksmaster i followed your tutorial but i think it got something about the wondows version i have. My windows version is the latest as of now. Can you please help me? My Laptop by the way is ASUS X570ZD, Ryzen 5-2500u wity Vega 8 graphics + GTX 1050 4Gb.
@@mikelllauron Which hexadecimal value did you enter? With a GTX 1050 I would try entering under Value data "30408" in the folder you created under NV40, then close and reopen your solidworks.
@@kylej173 i get it working by renaming the keys under NV40. My Gtx 1050 glitches but i enabled realview using my iGPU
@@mikelllauron Glad to hear you got it working!
doesn't work for RTX 3050ti how can i solve it?
thank you very much.I can use the realview now
i wasted my time .. and it didn't work with me 😭
Oh it worked with me finally .. when disabled the open GL .. thanks pro
@@mostafaarafat4479 it doesnt work for me needer! what shall i do? disable what?¿
Opem GL can be disable in software, performance... but it is not necesary! depending on the graph you have you need to use different value data this video explained it to me and finally it worked!!! ua-cam.com/video/37A1PFSADJE/v-deo.html
@@angelomonopoliroca523
thanks
Thank you for video, but still isn't possible to activate option of Anti-aliasing quality.
Thanks, though why not just tell us 40408 from the beginning?
just want to show you there is many value to put in, but just few able to active this feature, thanks for watching my friend!
pls hepl meee...How to Enable RealView on nvs Graphics Cards??? Nvdia NSV 4200M ????
@Quantum Sung Thank you ! i managed with that videio, i have a gtx 980 and it worked!
Thank you very much. It worked perfectly for me.
glad i can help you, thanks for watching friend!
You are a real Master! Thanks a lot!!
thanks a lot my friend!
I have geforce 920mx and it doesnt work help me pls
ua-cam.com/video/8o_RZnKrye4/v-deo.html
That's brilliant! Thanks a lot mate.
You're welcome!
Love you
after trying everything you saved me. subscribed as a thank you