Ryobi AirStrike P320 and P325 Nail Gun Review - Nail Guns Everywhere!
Вставка
- Опубліковано 4 чер 2024
- The Ryobi 18-Volt ONE+ Lithium-Ion Cordless AirStrike P320 18-Gauge Brad Nailer and P325 16-Gauge 2-1/2 in. Straight Finish Nailer are solid, inexpensive, and easy to use nail guns. Compatible with all of Ryobi's ONE+ line these nail guns use standard Ryobi batteries for cordless awesomeness. We have them both and they have greatly improved nailing operations in the shop.
We'll give you a quick overview of both nail guns and describe what we like and do not like about these robust little guns. We'll also warn you to purchase enough ammunition for them because you're going to use the. A lot.
Subscribe to Atomic Dairy: ua-cam.com/users/atomicdairy?s...
Instagram: / atomicdairymaker
Facebook: / atomicdairy
Wood Shop and Tool Projects: • Wood Shop and Tool Pro...
French Cleat Series: • French Cleat Shop Wall...
Tool Reviews: • Tool Reviews
Cool Wall Decor Projects: • Cool Wall Decor Projects
Curious Furniture Projects: • Curious Furniture Proj...
Gadgets, Gizmos, and Oddities: • Gadgets, Gizmos, and O...
Kitchen/Bathroom/Utility Room Projects: • Kitchen/Bathroom/Utili...
Arduino Projects: • Arduino Projects
Steampunk Projects: • Steampunk Projects
Stained Glass Projects: • Stained Glass Projects
#ryobi #airstrike #nail gun #one+ #nailer #18v - Навчання та стиль
![[STEP BY STEP] Ryobi P320 Airstrike Fix (not firing nails)](http://i.ytimg.com/vi/w9-noJgnwlc/mqdefault.jpg)
We love our Ryobi nail guns. They are so much fun! We're always building so subscribe to see our regular uploads!
Thanks for the review Mate, love the straight froward preso , fun and informative. Just got my first nailer for X-mass and I am now gunnig for it , YE BABY .....
Thank you! Glad you got one too. You'll love it!
Thanks for the review!
Great video = informative and great format- It helped me choose the 16 gauge for the 1st nailer.
Great to hear!
I have both and use them all the time for home projects. They work well and never jam. I like them so much, I got the 18 GA crown stapler and 23 GA pin nailer. Very cost-effective for home use.
Completely agree. We love these nail guns and they keep getting used on new projects.
We don`t get the Stapler in the UK unfortunately, no idea why. I`ve had my 18g nailer for about 8 years and it`s used almost daily. Never let me down.
mine jammed. dog shit
Great Review! Your assistant who "stole" your nail gun and said "nailed it" ----- that was cute!
She's the best! And she loves nail guns!
Thank you very much for Ryobi AirStrike P320 and P325 Nail Gun Review - Nail Guns Everywhere!
Love these guns. I use them all the time!
You're wife did an amazing job on the shingles, while you were reviewing the 16g nailer. She's awesome!!!
She is awesome! And she's a machine when using that nailer!
I don't comment normally but this was information and funny, thank you!
Glad it was helpful! And that you enjoyed it! And that you visited! Many thanks!!!
Love it! Thanks for the heads up!
Happy to help!
Awesome Presentation
Thanks a lot! I had fun making the video and the nailers still work great!
Dude, these tools are so good. Have used the pin nailer and brad nailer (not one plus) with 1.5ah, 4ah and 6ah batteries. Makes me really appreciate not lugging an air compressor, hose, and gun around all the time. The efficiency of the reset between fires and effectiveness of driving the nail increase with battery size. The 6ah makes it a completely different tool from the 1.5ah.
Absolutely agreed on all! We love these guns and use them all the time!
I don't own a nail gun yet, but I thought I would like the battery operated style. Thanks for the review!
Ryobi is slowly convincing us to change to battery tools. We've been blown away at the power and long battery life of these nailers. Highly recommend!
I have a Makita 16ga finish nailer and a Ryobi 18ga brad nailer. I prefer the Ryobi…it never jams on me, it has great battery life, and it feels solid. And I think it was half the price of the Makita equivalent.
It really is a great tool!
Great recommendations!!!!
Glad you like them!
Nice and very funny presentation! Kudos!
Thank you very much and glad you enjoyed it!
I own all the Ryobi nailers from the 3/8" Stapler, 23g. pin nailer, crown stapler, 15g angle nalier, 16g, & the 18 gauge models. HOPEFUL they make a framing nailer
LOVE MY RYOBI NAILERS!!!
GREAT tools and very useful. I'm using them a lot more than I thought I would!
Think they have a framing nailer! It comes in 15 and 16 gauge
Best thing about this tool is that I have to bring it back every 29 days
Alot of fun waching this video
Thanks! Very glad you enjoyed our humor!
Love it... you guys are hilarious
Why thank you! Glad you enjoyed it!
Gracias vato appreciate it 😊
¡De nada! Are you going to get one of these?
Nice job!
Thanks! We like these guns and recently used them to build a dinosaur. True story!
Cgreat compariso review! Can you please do another review on the Ryobi 18V Airstrike 15 Gauge Angled Finish Nailer P330 model.
That one is on my list to get but it may be awhile. These Airstrikes are really great nailers and I'm looking forward to completing my collection!
That was a nice overview and introduction to the nail guns.
That disc sander in the back is missing the sanding disc...curious about the story on that.
We used up that disc on a project awhile back and haven't stuck a new disc on yet. We have a few in the drawer of that tool stand but just haven't needed them yet.
Love the toys!!! Cheap and cheap.
“I got stuff to do.”
*stares and walks away”
Same girl same 😂😂😂
I love these people. Such an informative video. You’ve gained a new follower lol
She got it done too!
Best video 💯
Thank you!!!
Got the 320 from a pawnshop for $100 with battery awesome tool!😂
Love the video and the Philippine sticker on the background.
Thanks! My dad was Navy and we were stationed in the Philippines for awhile. I went to junior high in Zambales and high school in Bataan!
Thanks to you, I bought the Ryobi Air Strike. Love it thus far. Thank you.
@@G2Bjo039 Outstanding!!! I hope you like it as much as I do!
Nice bidet!
Thanks!
I love my Ryobi tools, and now I need a brad nailer and like you video. I see you used the off brand batteries, what is your opinion of them compared to the real Ryobi batteries? Do you suggest them?
Those are real Ryobi batteries, but I have heard of other types. I've never used anything else though but others seem to do just fine with them.
What would you suggest for outdoor heavy use, I know paslode have first fix for outdoor use and second for minor work (I think I got that right)
Well that is a framing nailer, which is a few steps up from our brad nailers. But Paslode has a great product that can do the job. For lighter work like we do like moulding attachment and box construction the Ryobis work great.
I have 3, ,2 18 gauge and 1 16 gauge bought them for $99. Couldn't buy a nailer from another brand as good as them
Just wondering if you can comment on nailing moulding with the 320. You mentioned that the 325 worked well but is the 320 equally good? Don't really feel like spending the difference for the 325 personally.
I have nailed moulding with both and had no issues. I prefer heavier nails for thicker moulding but both guns do a great job.
Thank you for the funny video.
Is possible to put 18G nails in the P325 tool (dedicated for 16G nails)?
I wouldn't recommend it. The hopper is too narrow I believe.
If you could only have *_one_* of these nailers, which would you go for, please?
I'm a keen DIYer, and upholstery/upcycler and unsure which is the right tool to choose.
I'd welcome advice please?! 😊
If I only had one I'd go for the lighter weight gauge. It's more useful for the type of work I do. But if I was doing a lot of moulding work I'd go for the 16 gauge. Depends on what you normally build.
I don’t know if there is such a thing, but I’m looking for a bit of an all rounder & need your help.
I have to do some work in my loft using 4x1 & 4x2, but would also like to use a nail gun when building bird nest boxes so would then use smaller nails, which gun would you suggest to cover both tasks?
Thanks & have just subscribed. 👍👍
Welcome aboard! And glad you liked the video! If I only got one I would get the 18 gauge gun. We tend to use that one the most and that's the gauge I think would work well on smaller tasks like your bird house. We use it for most things these days.
@@AtomicDairy Thanks for your reply, I bit the bullet & purchased the 18 gauge gun & it works a charm, thanks again. 👍👍
Hi what size round head nails can be used on a Ryobi nailer. im looking to secure decking joist hangers but not sure if the nail will pass through the pre drilled holes
16 and 18 gauge are what they use and there are a LOT of nails available in that range that would work.
I'm looking into buying a cordless nail gun (my first nail gun), and still a little confused on which gun to get (18 gauge brad or 16 gauge finish). I would primarily be using the gun for baseboard / quarter round and other trim applications, no fine wood working. I think what has me confused is that I see people install baseboard and trim with a brad nailer when other people say to use a finish nailer. Please help
I've used both, depending on the thickness of the trim and what is behind it. If you are going through a thick piece of trim, the sheet rock, and into the stud in the wall you will probably have better luck with the 16 gauge. For thinner work the 18 gauge is less likely to split the trim, and it leaves a smaller hole in the surface.
I love your helmet!! what kind is it??
Navy flight deck helmet. My dad as a Navy pilot and I grew up wearing his old one around loud tools. They work great!
@@AtomicDairy thanks man!! I knew it looked familiar but I just couldn’t remember why
which one will work best for baseboard molding in my house? dont need anything more fancy
We use the 16 gauge for baseboard stuff. Works great and does not split the half rounds.
18 gauge, 2 inch, is more than plenty to hold a simple piece of base on, and the hole is twice as small...i use a brad nailer for all my trim, unless its 3/4 of thicker
hi, i was looking to buy a brad nailer and wonder if any battery works with this tools ?
These use Ryobi batteries but we've seen some after-market adapters that can support other batteries. We like simple though, so we just use the Ryobi batteries. They are pretty great and run these tools for a long time.
This is the way.
This is the way.
So you have plans for that hanger for those tools
Sort of. Here is the project and we lay out all the measurements in the video: ua-cam.com/video/jjMBCsT81pI/v-deo.html
Can you only use finish nails in these? I need to use nails with a slightly bigger head
You should be able to if they come in the right gauge.
How much was the maximum brad nail use for 18g p320 mate?
If I understand your question, it can fire 105 nails before it runs out. In actual use we tend to put fewer brads in it because most of our jobs don't require that many nails.
I love my Ryobi tools. And I have beat the crap out of them.
We haven't had any problems with ours and keep adding to our inventory!
I wish they make a cordless framing nailer
Maybe they'll add one to go with these. They are both great nailers!
@@AtomicDairy I have the P320 now and I love it - along with a large number of other tools from them.
Don’t say bump fire ATF will take it away 😂😂
Military cranial protection love it old squid here
My dad was an A-7 pilot and sold us on flight deck helmets. They work VERY well in the shop!
Which one for garage door weatherstriping?
I'd use the P320 Brad Nailer but both could work for that job.
im going to buy tomorrow P320 nailgun it selling $198 at home depot
That's a good deal. You'll love it!
This channel is obsessed with French cleats.
Every upper cabinet I hang, every wall panel I hang is on a French cleat
Which one your prefer for real hardwood flooring?
Heavier gauge works for us for hardwoods, but we've mostly used these for trim.
@@AtomicDairy so a 15g would be idea
Not sure. We have 16g and 18g but I personally would use larger nails to attach flanged hardwood floors. But I've never laid a floor before and might be wrong.
Next step for you two is canon operative course :)
Constant jamming of nails, after very little use on a new unit....endlessly frustrating...when it works, its great, but I've had endless downtime. It works 3 times out of 10 in my case. Was quicker to just put in screws or nails by hand into my project. Have to unjam after about 2 -3 nails of use, each time.
Wow. Sorry to hear that. We haven't had any problems but maybe we'll see trouble in the future. Hope not.
Im a dewalt guy but this trim gun best product ryobi makes
Absolutely agree!
Can we use the nail gun on bricks or concrete?
I have, with mixed success. Probably depends on how dense the brick/concrete is at your site.
@@AtomicDairy thanks for that! I really need a cordless nail gun that can do bricks.
A lot of the Ryobi haters never owned or even used one.
So they make one for framing
Do they? That means I may need to get another one...
5:50 not the biggest fan of the house, but probably pretty cool inside.
Is the ONE+ HP worth the extra money 💰
Can it do concrete nails?
I haven't used them, but I've heard the gun doesn't have enough power to penetrate concrete or tiles.
Greetings I need one for Staples??
They have one. Look up Ryobi ONE+ Compression Drive 3/8 in. Crown Stapler.
I got the P320 and was too happy, until a few minutes into use, less than 30 or 40 nails, it just stopped working. I checked everything 15 times... may be more... used three different fresh actual Ryobi batteries, and I couldn't get it to work. Drove back to Home Depot and did a swap. Second one seems to be working better, but several times, still, on the second unit, it just decides to stop working. Second unit at least has come back on line and I am able to keep working on our project. I was so upset, that I actually broke out the manual and read it. I am not seeing, at all, what I am doing wrong. I looked through the troubleshooting page and its a fat N/A for me. hmmmm .... so on the back, I am suspecting that maybe, that knob should never be touched; leave in the middle? Wait- I tried that too. I love this thing. I think when it works, it's a game changer for us. I have many Ryobi tools, but prior to today, I have never, EVER, had any malfunction with any of them. Would appreciate your insight on this. No, the tool never got a chance to get hot. Fresh real actual Ryobi batteries. No nail james. I tried with the plastic nozzle cover on and off. Tried both 1 1/2" and 2". Checked for jams obsessively. Played with that gray twisty knob thing up front and the gray twisty thing in the back too. Thought I was going crazy so my sister tried everything I did also- you know- just in case it's just me.
Should it be sensitive to angle of use? I am thinking that should not matter. It would be a shame if this thing can ONLY be used at a 90 degree / straight up and down position.
Is it possible you got two bad tools? We've never seen that happen with ours even after a couple hours of use.
@@AtomicDairy this was a while back. Thanks for the follow up. I disassembled the firing pin a assemble, applied gun oil, and manually moved the plunger in and out a few times for the oil to lube the cylinder. It works perfectly now.
Outstanding! Glad to hear you fixed it and I will remember your fix if my guns start acting up!
I have to remove my battery after each individual mail and put it back in to get it to do the next one….. it’s brand new. Battery is fully charged. I’m about to take it back 😢
where do u get that 3rd party battery ?
It came with the tool. Works just like a real one!
@@AtomicDairy r these original ryobi tools ? was it a combo deal real with 3rd party battery ?
Is this brushless???
We looked it up and don't think so. The both work very well for us though.
The brad nailer would suffice for shoe molding.
Ohhhhhh Bump Fire on a Ryobi, ATF is gonna come and confiscate it cause it’s a Bump Fire Action😂😂😂😂😂😂💪💪💪
"Ready to nail whatever comes into your path" ughhh
They don’t work when they are cold. You have to wait for 1/2 an hour for it to warm up before you can use it. Love it otherwise.
I've never used mine cold but now I know what to look out for. Thanks for the heads up!
Have you got fake Ryobi batteries in them?
Nope, real batteries all around!
One thing these nailers aren't lightweight, otherwise good value and work well.
Agreed! You can make them a bit lighter by using the smaller batteries but then you don't have as much work time. But they do the job well.
Safety first, please remove the battery before loading the nail guns.
Is that why your wife wasn’t wearing hearing protection ?
DON'T BUY RYOBI!!!!
I have had this piece of crap for about 3 years and done about 10 small project (about 100 nails). It has never worked. DO NOT BUY!!!!!!! CONSTANT JAMMING!!!!
We'll keep an eye on ours. So far no problems but yikes! Sorry yours didn't do too well.
Shouldn’t you remove the battery while loading for safe practice? Same with adjustments. You have batteries in during these demonstrations…not safe.
I've been making and installing bespoke kitchen for over 30 year, I have a wide range of Ryobi tools including both airstrikes, there is no difference from a £190. Airstrike to a £560. Top range nailer, the end result is the same, they both put brads in equally the same, so called top carpenter's are just butt hurt because they have to keep up this fake image that you need the dearest tools.
We tend to use what works, but we don't build stuff all day every day. These nailers work great for us and we haven't had any problems. In fact, they are so easy to use that I've put moulding in places I wasn't planning to, just because it was made so easy by these machines.