Just found this content as I was searching about after-market levers... Really liked your narrative voice!👌🏻 Liked that you wore gloves... Good video 🔥 New Subscriber from KA 52! 🤟🏻
I Couldn't see from where you pulled the little switch while changing the clutch switch! I have checked the comments too but didn't find any related to it. Thank you
@@SrinivasGanesh i know you are smart but sometimes we tend to not think straight in excitement !!! like your videos..almost watched all your shorts and videos
Thank you for watching the video. I was using a local grease which the mechanic recommended. Doesn't cause any harm or create a muck. But later on, I started to use Lithium grease. And now I've let go of everything and using a clutch cable by Venhill. All Teflon coated. No lube required for a long time.
Hi, nice video. How can you know if de sensor on the clutch works properly witn the new levers? Whats the function of that sensor switch? Thanks and greetings from Argentina.
Basically clutch switch helps you start the motorcycle in any gear. If it is faulty, or extremely dirty, then you won’t be able to do so. And you will have to come down to neutral to start your bike.
Looks very inline with black handle bar. Good choice. I'm even looking the same for my GT. Will get them soon. Thanks for the video 👍. Any information on bar end mirrors - where did you get them from ?
Hey Srinivas. I too found the stock levers to be very flimsy and of low quality and I'm thinking of getting these. I have a question. How much duty did you have to pay for these levers? Thanking you in advance.
you can get a detail break down here - ua-cam.com/video/kSGXNJ7slXo/v-deo.html Also, might want to consider roadpowercustoms.com if you want something similar but don't want to pay customs duty.
Hi Sri. Did you also change the clutch cable after installing the levers? Or any specific adjustments to be made? Has this reduced pull effort? Any plans to change the actuator?
I have a video ready for a different clutch cable. Will release it soon. And these levers only made engaging the clutch more comfortable for me, due to my large hands, and the habit of engaging the levers with 2 fingers. This makes it very comfortable to do so as it is adjustable.
@@SrinivasGanesh Yes, that's why wanted to know more about the cable and the actuator... Levers help in easier reach given that it is adjustable. But with a cable or more importantly the actuator, it makes the operation even better... There were some suggestions around easy clutch, not sure if it is the right way to go...
Sir i just wanted to know how much would indian custom charged you to get them imported? And how smooth is that process and how long did it took you to get them imported to india?
Product will arrive in 2 weeks. Customs will depend on the weight and value of the item you've ordered. Check the comments, I have replied to this question somewhere :)
Point is the cost of convenience. I am 100% positive that there are more than enough enthusiasts out there, like me, who would pay top dollar to get something premium for their motorcycle. Also, our dreams don't end if something is "not available in India". Thanks for your time though.
What are the other Indian brand levers you had considered or compared before this ? P.S : I have a BakerExpress with same black Himalayan handlebars installed. So I’d want black levers too. Cheaper and good quality suggestions please. Thanks in advance
Thank you for watching the video. I had considered levers from Hitchcock motorcycles and etc-bike parts, prior to going with K-Speed. And here in New Delhi, India, I had a chance to see both those levers in action, so I came to a conclusion that they are all functionally the same exact levers. I also considered going with Amazon, since cheap was also one of my criteria but Amazon does not have one for Interceptor, and the ones that are listed there don't have that many feedback/ reviews. I hope this helps. P.s. Doesn't matter where you order from, you will have to give customs, unless you have a messiah friend who is coming from abroad. :P I hope this helps.
@@SrinivasGanesh sorry wanted to know if it was possible to replace the levers with undoing other components of the handle switches. Saw another video where the Brit guy took the grip off completely. Informative video just watched it again I think I can just replace the levers with bothering with other components of the handle
Hi Brother, fan of your work !!! The link which you've mentioned for the levers isn't taking to Kspeed and its not showing. COuld you pls help me with the link to purchase the same please
Hi Srinivas..I have a query regarding ordering these levers for my interceptor. I approached K speed, they forwarded me their payment link. So I wanted to ask whether there is a custom charge on it? Also how reliable is the company in dispatching the products?are there any delays etc you faced?
Hey Varun, I didn’t face any delays. The quality is fantastic, been using these ever since I made this video. No there is no custom charge in it, you will have to pay that once the product comes to your doorstep. Company is pretty reliable and they charge payments via that link only, it’s pretty secure since I never faced any problem. Happy buying! 🍻🙌🏽
Hey Sri! I have an interceptor as well and I feel like the handlebars are a little far for my comfort riding long. I'm not as tall as you but avg sized. Would you recommend me swapping the OEM for the Himalayan bars? Would they be a tad bit easier to reach?
Hi, Your videos are amazing man !! ❤ Btw How much you payed for the levers (how about the custom charges) ? And can i get the website, where i can place order ? Thank you !! Tc. Ride safe 🧿
If you want these exact same levers then follow the link in the description. You will have to pay customs duty on it when it arrives in India. But you’ll get these home delivered in about 2 weeks.
@@TheRuneygulliya no problems. Runs super smooth. Just maintain your bike periodically, clean and re grease. With the added benefit of adjusting them according to your hand.
They work fine with paypal. You have to add them to your cart. Provide an email Id. They’ll share an invoice there, you make the payment and they will send you a confirmation email and thereafter ship you the item. It’s a weird process indeed but it works. We are just not used to that method. That’s all
I have received the payment link of 2100 THB adding an extra 300 THB for shipping ( to Bangalore) . Is there any way to avoid it? It's gonna be a huge amount along with Customs duty 🥵
@@SrinivasGanesh I meant that extra 300 THB for shipping ,Customs duty can't be avoided 🥶 . I thought it would be just the 1800 THB. I was also trying to find the alternatives are levers from Tec or Roadpower is better or should I stick on to K- speed. Ty for the reply bro ❤️
@@amjithprakash6009 if you haven’t bought yet. Then roadpower is a better alternative. Since they are based in India. But they do charge a little extra
@@amjithprakash6009 2100thb for shipping and customs included ? Or do i need to pay custom charges ? how much is it including customs and shipping (final amount).
excellent point. I wanted to cover this point in the video itself, but I was worried that it might end up being too long and people might not like it. To answer your question, it reached New Delhi in 2 days. But took a week to reach my address. And I had to pay like 3k INR customs on this. Which sucked, but I didn't have any option, either loose the 4k in levers, or loose 3k and get the levers. So, lesson learnt is, if you are ordering something online, do check how much customs you'll have to pay. Or the minimum amount in which you are obligated to pay customs.
@@mayanksrivastava6361 Oh that. Yeah that switch helps you start the motorcycle in any gear, by engaging the clutch fully. If it gets faulty, then you won't be able to start you motorcycle in gear by pressing the clutch. You will have to come to neutral and then start the motorcycle.
Mine is a Himalayan handlebar. Without any risers. Since I am tall. It is a straight swap and you don't need to cut the wires or anything. Unfortunately the lighting conditions, when this was being installed, were not that good so I could not film it.
@@SouravAcharya9444 You'll need two people to do that, and unfortunately I am not taking that chance with a stranger during these times, and my parents are kinda old to hold the handlebar. But rest assured, I will make a video on that in the future. :) Thank you for watching my video.
Hi Sri, can I get these installed at a local mechanic? Or would you suggest I do it on my own or visit a RE service Center? I am new to all the DIY of the bike. I’ve never messed with the stock parts of any of my vehicles so far! I have this doubt because, I find the stock clutch to be far away and after a ride in the traffic, the underside of my left palm pains. So an adjustable clutch should do the trick to solve this. What say, Sri?
Oh you can do that with ease. Just follow these on screen instructions verbatim. And you’re good to go. :) and you will learn about your motorcycle a little more. ;)
Just found this content as I was searching about after-market levers... Really liked your narrative voice!👌🏻
Liked that you wore gloves...
Good video 🔥
New Subscriber from KA 52! 🤟🏻
Thank you so much for watching! :)
I Couldn't see from where you pulled the little switch while changing the clutch switch! I have checked the comments too but didn't find any related to it. Thank you
It is from under the console where the lever gets inserted.
The black color was definitely the right choice.
😍 Your comment means a lot!!! Thank you soo much for watching my video!🙌🏽
Concise and useful content, as always! Cheers!
thank you so much for watching :)
Great video Man! Has given me the confidence to try it myself. Many thanks!
Ofcourse!! If I can do it, so can anybody else! Lemme know should you need any help. 🙌🏽 and thank you for watching the video!
Thanks for the help buddy !!
Hey hey!! You’re welcome! Thank you for watching the video!! 🙌🏽
Great tutorial....thank you Sr...
Thank you for watching buddy! 🙌🏽
Classy way of reviewing brother
Appreciate the like and sub brother! 🙌🏽👌🏽
you could slide the clutch lever a little far to prevent it from touching
That is what I did! Thank you so much for watching!!
@@SrinivasGanesh i know you are smart but sometimes we tend to not think straight in excitement !!! like your videos..almost watched all your shorts and videos
@@omkarbhosale4536 🥹🤗💛 you are amazing for doing that!
Hey Sri, I would also recommend you to try out the ngk high performance spark plugs , I'm truly loving it
Sure! I will read about them :) thank you for watching the video!
@@SrinivasGanesh welcome! How much indian rupees did those levers cost you
@@kruthagrai8754 ~4k INR. I wrote that in the description.🙌🏽
Good to see the mods being added step by step. Wanted ask you about that brace bar. Was it powder coated or painted? Didn't get a good look ☺.
Yes it is powder coated, but you can also get this from any RE showroom. Its black Himalayan handlebar
@@SrinivasGanesh ohh, I just meant that handlebar brace ©====©. Didn't knew himalayan handlebar had it too.
@@jaxen7358 Yep it does :)
Hey Srinivas. Great video explaining how to install CNC Levers step by step. Which type of grease you using? Thanks!
Thank you for watching the video. I was using a local grease which the mechanic recommended. Doesn't cause any harm or create a muck. But later on, I started to use Lithium grease. And now I've let go of everything and using a clutch cable by Venhill. All Teflon coated. No lube required for a long time.
Making a video on clutch cable installation today. Will be posting it in the coming week.
Thanks for the feedback! Can’t wait for your next video to drop.
Hi, nice video. How can you know if de sensor on the clutch works properly witn the new levers? Whats the function of that sensor switch? Thanks and greetings from Argentina.
Basically clutch switch helps you start the motorcycle in any gear. If it is faulty, or extremely dirty, then you won’t be able to do so. And you will have to come down to neutral to start your bike.
I love your bike♥️♥️😍😍
thank you so much!!!
What is your review on this can i buy in 2023??
yep, I have been using this ever since I installed them. Very good.
Looks very inline with black handle bar. Good choice. I'm even looking the same for my GT. Will get them soon. Thanks for the video 👍. Any information on bar end mirrors - where did you get them from ?
Pro Tip, try to make it look like you're getting it as a gift from a friend, else good luck paying double the amount on customs. 💔
ua-cam.com/video/JmSUQCG5orE/v-deo.html
Bar-end mirrors. :) All links are the in the description. Thank you for watching the video!
@@SrinivasGanesh Hi Sri. How do you make it look like a gift from a friend to avoid double the duty?
Good video my friend
Thank you for watching it my friend!
Nice
Thank you for watching the video!
Hey Srinivas. I too found the stock levers to be very flimsy and of low quality and I'm thinking of getting these. I have a question. How much duty did you have to pay for these levers?
Thanking you in advance.
you can get a detail break down here - ua-cam.com/video/kSGXNJ7slXo/v-deo.html
Also, might want to consider roadpowercustoms.com if you want something similar but don't want to pay customs duty.
Wonderful
Ya kei hara!! :D Efcharisto!!
Hey Sri! Would you say it makes the clutch feel any lighter? or is it the same strength and just a cosmetic upgrade?
It has become lighter.
Hi Sri. Did you also change the clutch cable after installing the levers? Or any specific adjustments to be made? Has this reduced pull effort? Any plans to change the actuator?
I have a video ready for a different clutch cable. Will release it soon. And these levers only made engaging the clutch more comfortable for me, due to my large hands, and the habit of engaging the levers with 2 fingers. This makes it very comfortable to do so as it is adjustable.
@@SrinivasGanesh Yes, that's why wanted to know more about the cable and the actuator... Levers help in easier reach given that it is adjustable. But with a cable or more importantly the actuator, it makes the operation even better... There were some suggestions around easy clutch, not sure if it is the right way to go...
Sir i just wanted to know how much would indian custom charged you to get them imported? And how smooth is that process and how long did it took you to get them imported to india?
Product will arrive in 2 weeks. Customs will depend on the weight and value of the item you've ordered. Check the comments, I have replied to this question somewhere :)
The lever is not available in India for a direct buy. Whats the point in reviewing?
Point is the cost of convenience. I am 100% positive that there are more than enough enthusiasts out there, like me, who would pay top dollar to get something premium for their motorcycle. Also, our dreams don't end if something is "not available in India". Thanks for your time though.
What are the other Indian brand levers you had considered or compared before this ?
P.S : I have a BakerExpress with same black Himalayan handlebars installed. So I’d want black levers too. Cheaper and good quality suggestions please. Thanks in advance
Thank you for watching the video. I had considered levers from Hitchcock motorcycles and etc-bike parts, prior to going with K-Speed. And here in New Delhi, India, I had a chance to see both those levers in action, so I came to a conclusion that they are all functionally the same exact levers. I also considered going with Amazon, since cheap was also one of my criteria but Amazon does not have one for Interceptor, and the ones that are listed there don't have that many feedback/ reviews. I hope this helps.
P.s. Doesn't matter where you order from, you will have to give customs, unless you have a messiah friend who is coming from abroad. :P I hope this helps.
Can you do the clutch without loosening the grip
Didn’t get your question. What do you want to do?
@@SrinivasGanesh sorry wanted to know if it was possible to replace the levers with undoing other components of the handle switches. Saw another video where the Brit guy took the grip off completely. Informative video just watched it again I think I can just replace the levers with bothering with other components of the handle
Hi Brother, fan of your work !!! The link which you've mentioned for the levers isn't taking to Kspeed and its not showing. COuld you pls help me with the link to purchase the same please
Yeah, I checked it myself, it seems the product is out of production and no longer available.
Hello Ganesh, I am going to order this levers for my bike. Does it costed any excise duty as we are ordering out of India product ?
Thank you for watching the video. These will cost you INR 4100. And a customs duty around INR 1800. These are very comfortable indeed!
Can u make a product review on WsW customs Thailand they have a ton of mods and bike ascessories 👍
If they can send me any product I sure can. I will check it out for sure.
What’s the delivery time on these? You had to pay any customs?
1-2 weeks. Yep. Customs duty of around 1800 INR.
Hi Srinivas..I have a query regarding ordering these levers for my interceptor. I approached K speed, they forwarded me their payment link. So I wanted to ask whether there is a custom charge on it? Also how reliable is the company in dispatching the products?are there any delays etc you faced?
Hey Varun, I didn’t face any delays. The quality is fantastic, been using these ever since I made this video. No there is no custom charge in it, you will have to pay that once the product comes to your doorstep. Company is pretty reliable and they charge payments via that link only, it’s pretty secure since I never faced any problem. Happy buying! 🍻🙌🏽
Thanks a lot Srinivas for the advice!!👍
Hey Sri! I have an interceptor as well and I feel like the handlebars are a little far for my comfort riding long. I'm not as tall as you but avg sized. Would you recommend me swapping the OEM for the Himalayan bars? Would they be a tad bit easier to reach?
Get handlebar risers. The stock and Himalayan handle bars are almost the same.
How long is this lever? 147mm?
About 175mm
Does this affect the clutch? I just replaced mine on hunter 350 and was little worried. What do you think?
Affect in what sense?
@@SrinivasGanesh On the clutch plates
What kind of grease did you use?
a general grease.
will these fit to my fz v3 bike ?
These are made to fit the Royal Enfield 650 Twins. You’ll have to find out on their website if they have one for your motorcycle.
Hi,
Your videos are amazing man !! ❤
Btw How much you payed for the levers (how about the custom charges) ? And can i get the website, where i can place order ?
Thank you !! Tc. Ride safe 🧿
About ₹2,200 for customs. But you can save those and order those from an Indian website. Roadpowercustoms.com
Thank you so much for watching the videos!
Ur accent and explanations are so gud .but 7 k is lil too high for leavers. Please do cover fuel tank while working on handle bar.
Thank you so much for watching the video! 🙌🏽
I know I know I should have covered the tank. It was bothering me constantly while making the video. 🙈
@@SrinivasGanesh i got a scratch while working on handle bar still im regretting 😭
@@arjungangadhar6134 uh oh!!💔
ABS works fine? After installing this?
ABSolutely it works fine!!!
Hi I would like to order this but how to get it without customs n in how many days hv u got it
you cannot get it without customs unless you know someone working in customs department. I got it in two weeks.
I want this from where can I get it I live in Delhi
Is it working properly now or is there any problem
If you want these exact same levers then follow the link in the description. You will have to pay customs duty on it when it arrives in India. But you’ll get these home delivered in about 2 weeks.
@@TheRuneygulliya no problems. Runs super smooth. Just maintain your bike periodically, clean and re grease. With the added benefit of adjusting them according to your hand.
Hi srinivas i tried purchasing these levers but i couldn't make the payment since the bank details they have provided are weird
They work fine with paypal. You have to add them to your cart. Provide an email Id. They’ll share an invoice there, you make the payment and they will send you a confirmation email and thereafter ship you the item. It’s a weird process indeed but it works. We are just not used to that method. That’s all
@@SrinivasGanesh ok dude thanks a lot
I have received the payment link of 2100 THB adding an extra 300 THB for shipping ( to Bangalore) . Is there any way to avoid it? It's gonna be a huge amount along with Customs duty 🥵
Firstly, congratulations on getting this. Secondly yeah customs cannot be avoided. 😭
@@SrinivasGanesh I meant that extra 300 THB for shipping ,Customs duty can't be avoided 🥶 . I thought it would be just the 1800 THB.
I was also trying to find the alternatives are levers from Tec or Roadpower is better or should I stick on to K- speed.
Ty for the reply bro ❤️
@@amjithprakash6009 if you haven’t bought yet. Then roadpower is a better alternative. Since they are based in India. But they do charge a little extra
@@amjithprakash6009 2100thb for shipping and customs included ? Or do i need to pay custom charges ? how much is it including customs and shipping (final amount).
Was there any custom import charges you had to pay ..... And how long did it take to deliver....
excellent point. I wanted to cover this point in the video itself, but I was worried that it might end up being too long and people might not like it.
To answer your question, it reached New Delhi in 2 days. But took a week to reach my address. And I had to pay like 3k INR customs on this. Which sucked, but I didn't have any option, either loose the 4k in levers, or loose 3k and get the levers. So, lesson learnt is, if you are ordering something online, do check how much customs you'll have to pay. Or the minimum amount in which you are obligated to pay customs.
Also thank you for watching the video. Much appreciated.
@@SrinivasGanesh so it totally cost you 7k for the levers including customs?? Sorry your wording is not very clear...
@@sinuslebastian6366 Yes. Total 7k including customs.
Srinivas Ganesh wow!
Does it fit for GT?
GT & Interceptor are same bikes with only ergonomic differences. So yes. It does
Hzy bro, please which grease did you use ?
A local one. Now I use a lithium grease.
@@SrinivasGanesh thank you so much 🙏🙏
@@gotpkrgotpkr my pleasure and thank you for watching the video!
@@SrinivasGanesh my pleasure 🙏🙏
@@gotpkrgotpkr 🙏🏽
What is tiny switch for ?
For adjusting the levers to better suit your hand grip size.
@@SrinivasGanesh not that one. I am talking about the one at 3.23
@@mayanksrivastava6361 Oh that. Yeah that switch helps you start the motorcycle in any gear, by engaging the clutch fully. If it gets faulty, then you won't be able to start you motorcycle in gear by pressing the clutch. You will have to come to neutral and then start the motorcycle.
Will this fit in my GT650 as well?
Yes sir. These are same motorcycles. (Sister Twins)
sir can u tell me how u change the full handle of your Interceptor
Mine is a Himalayan handlebar. Without any risers. Since I am tall. It is a straight swap and you don't need to cut the wires or anything. Unfortunately the lighting conditions, when this was being installed, were not that good so I could not film it.
@@SrinivasGanesh plz tell me i want to change do a video in this lockdown
@@SouravAcharya9444 You'll need two people to do that, and unfortunately I am not taking that chance with a stranger during these times, and my parents are kinda old to hold the handlebar. But rest assured, I will make a video on that in the future. :) Thank you for watching my video.
@@SrinivasGanesh man u forget about selfie, go pro, go pro stick 🏒
@@SouravAcharya9444 hahahahah I didn't mean it like that. 😂 I'll try and make one.
Sir may I know the price of that livers which you got in k-speed ??
Bro insta ID please
@Srinivas_Ganesh. It's also there in the about page. :)
INR 4100.
what bar end mirrors are you using??
ua-cam.com/video/JmSUQCG5orE/v-deo.html
These are the ones. You'll find the link in the description of this video.
Hi Sri, can I get these installed at a local mechanic? Or would you suggest I do it on my own or visit a RE service Center?
I am new to all the DIY of the bike.
I’ve never messed with the stock parts of any of my vehicles so far!
I have this doubt because, I find the stock clutch to be far away and after a ride in the traffic, the underside of my left palm pains. So an adjustable clutch should do the trick to solve this.
What say, Sri?
Oh you can do that with ease. Just follow these on screen instructions verbatim. And you’re good to go. :) and you will learn about your motorcycle a little more. ;)
Good job, but pleez loose the accent..
I have the best reply for you!
ua-cam.com/video/m6uVTIt84g8/v-deo.html
Please see this too. Thank you for watching my videos though! Peace!