Carbon Fairing Brackets Build - ZX6R Build PT. 12

#easycomposites #carbonfiber #motorcycleparts
Hi, welcome back to my channel.
My instagram: / zrc_works
If you found this helpful or simply wish to support the channel or just want to buy me a coffee, feel free to donate to the "Tip Jar" via the PayPal link below. Thank you!
www.paypal.com...
The materials I used to make the carbon bracket:
XC110 210g 2x2 Twill 3k Prepreg Carbon Fibre: www.easycompos...
XC110 416g 2x2 Twill 6k Prepreg Carbon Fibre: www.easycompos...
CR1 Easy-Lease Chemical Release Agent: www.easycompos...
MC1 Mould Cleaner: www.easycompos...
Perforated Release Film: www.easycompos...
Unperforated Prepreg Release Film: www.easycompos...
Breather Cloth: www.easycompos...
Vacuum Bagging Film: www.easycompos...
Vacuum Bagging Sealant Tape: www.easycompos...

[@85ddog]

this is do amazing. wish I had the talent to make some for my 04 zx6r

[@harunjuliansyah2414]

Lama baru nonton lgi ni chanel bro, sukses selalu my from Indonesia

[@zrcarbon9937]

Thanks for watching again!!! 🏍️🛠️🤘

[@jasonroberts4029]

Exactly what I needed! Thanks!

[@zrcarbon9937]

I’m glad you found it useful 🛠️🤘

[@ediroks]

Another great work!

[@SirSlyBird]

Tanks for sharing your project. Lots of useful info in all your videos. Hope I can do a good job like you. 👍

[@zrcarbon9937]

Thanks so much for the compliment and thanks for watching! I’m sure you’ll be fine. Only the first step is difficult 🛠️🤘

[@paolonieri473]

Thank you ! Would be interesting to see how you manage the overlapping of the layers

[@zrcarbon9937]

Thanks mate! I’ll take a note and I will include that in one of my videos 🛠️🤘

[@paolonieri473]

🙏

[@jeanfrancoispoivre4438]

Magnifique 😊

[@zrcarbon9937]

Thanks 🙏 🛠️🤘

[@hatima6068]

Make Ducati wings pleaseeeee

[@zrcarbon9937]

I will make wings for my bike but those will be custom made wings 🛠️🤘

[@hatima6068]

@ something like superlegerra v4?

[@LC4Driver]

Again - awesome work done here !
Thank you for taking us with you through this process.
Have you been thinking of using Screws in a different colour (black for example), so the carbon-Finish isn‘t disturbed like with the original steel-screws ?
And what are your plans for the tank ?

[@zrcarbon9937]

Many thanks for the compliment!
I thought about it yes, but I quite like the stainless steel bolts and washers on the fairing.
I would like to make a carbon fiber tank. Also planning to do just a carbon tank cover. Never done those before. Will be a good learning experience for me 🏍️🛠️🤘

[@LC4Driver]

@
So things remain exciting on your channel - thank you so much for having us with you ! 🙏🏽

[@22zulu]

are you going to clear coat or polish the side and front fairings?
And yes, the video is very insightful, thank you!

[@zrcarbon9937]

Hey
Thanks so much!
Yes, everything going to be clear coated and polished. That’s probably my next vid 🛠️🤘

[@FaizulHadi-o7f]

Fuel tank carbon fiber 🎉

[@starmokey195]

Great job ! Did the large mold with molding past has deformed during the post cure ? I already had deformation issues using high temp molding past for large mold

[@zrcarbon9937]

Hey
That’s bad
The post curing temperature must be increased very slowly
Start on 60c for two hours and every two hours rise the temp with 10 degrees Celsius up to 120.

[@starmokey195]

@@zrcarbon9937 alright. Thanks I'll take notes. I used the post cure cycle gived by easy composite for the emp160