Resin Stained glass effect tutorial | Holographic Resin art | Make a resin window panel with me
Вставка
- Опубліковано 31 лип 2024
- Thanks for watching my resin stained glass DIY video. Subscribe so you don't miss any of my future Resin coaster video's. Also please go check out a few more of my other videos. Those are great ways to support my channel.
What do you think of this technique? Let me know down in the comments.
When working with resin always work in a well ventilated area. Wear a respirator with organic vapor filters and wear nitrile gloves.
#resinart
#resincrafts
#holographic
Want to support my channel? Check out my art supply Amazon wish list. You can support my channel by sending me some resin or art supplies from Amazon. Here's the link. Thanks in advance for your support.
www.amazon.com/hz/wishlist/ls...
Check out my milky way coaster tutorial. I show step by step how to mix your resin and pigments. It's a great video if you are new to resin.
• 😍 Milky way resin coas...
Coupon codes:
GenCrafts: NAPTIME10
The Epoxy Resin Store: NAPTIME20
Dryer days art studio: NAPTIME
Laura's art corner: TISH10%
KSRESIN: NAPTIME
As an affiliate of GenCrafts, The epoxy resin store KSRESIN & dryer days art studio. I earn a small commission on sales used with my coupon code. This is at no additional cost to you. It's a great way to support my channel.
Links to items I use in my videos purchased from amazon. If you have any amazon shopping to do at all. Please use my referral link to go to their website & shop just like you normally would. If you use my link to go to Amazon's site any purchase you make will earn me a small commission and in turn will help out my channel. You can also bookmark my link and use it for future Amazon shopping. I am so grateful for your support. As an amazon associate I earn from qualifying purchases.
Holographic window film
amzn.to/2S9aVfF
100% silicone caulk
amzn.to/3gJioMI
3M half face respirator I use. You must purchase 3M organic vapor filter cartridges separately. amzn.to/3nYaZJR
3M organic vapor filters/cartridges I use on my respirator amzn.to/3o0D0R3
Heat gun I use for resin art, it comes with attachments.
amzn.to/36uh5tA
Kangaroo brand liquid latex
amzn.to/3t2e65H
In today's video I used @genuine crafts epoxy resin. Here's the link. Discount code NAPTIME10 will give you extra savings.
link to GenCrafts Epoxy Resin Used in today's video.
gencrafts.com/collections/epo...
Link to GenCrafts website.
gencrafts.com/NAPTIME10
The general use epoxy or liquid diamonds from the epoxy resin store would also work well for this project. Here's the link to the liquid diamonds casting resin be sure to use my discount code NAPTIME20 to save 20%
www.theepoxyresinstore.com/pr...
If you prefer to use KSRESIN. I also have a discount code for any of their products as well. Discount code Naptime will save you 5% on any purchase. Here's the link to their liquid stone resin.
www.ksresin.com/products/liqu...
0:00 Intro
0:21 Making silicone mold
1:46 Mixing resin
3:30 Pouring resin
5:10 Demolding holographic resin panel
6:55 Attaching hanging hardware
7:20 Final close ups
As an affiliate of GenCrafts, the epoxy resin store and KSRESIN At no additional cost to you. I earn a small commission when you use my coupon code. It's a great way to help support my channel.
Let me know if you have any questions down in the comments, I would love to hear from you.
Safety Disclaimer
Before you create ALWAYS read all of the instructions and safety labels on all of the products you are going to use. I am no expert I am just sharing the way I like to create art and any tips/tricks I have learned along the way. ALWAYS wear proper safety gear when working with resin and paint. I ALWAYS work in a well ventilated area. Also always wear nitrile gloves and a full face respirator when I work with resin. Remember to have fun and be safe when you are creating. Always keep a fire extinguisher nearby your Creation station. Thank you :)
As an affiliate of the epoxy resin store, ksresin, arteza and Amazon I earn a small commission at no additional cost to you. I greatly appreciate your support and use of my affiliate links and codes. All commissions earned help me purchase more art supplies so I can keep making videos for my UA-cam channel. - Навчання та стиль
These are magical 🧙♀️
Thank you 🤗🌈 they're so fun to make. Thanks for watching 🌈🤗 I love seeing your beautiful art on Instagram 🤗
Absolutely love this stuff! I ordered some and have been playing with it. Just a tip for anyone else who wants to top, it doesn't work if you immerse it in resin (sadly). Found this out the hard way. Another tip...make certain that your silicone cualk is well adhered to the film, and high enough to hold your resin. (Yup you guessed it...major mess!)
Thanks so much and thanks for watching. Great tips 🤗 you can also go around your caulk mold with hot glue if you want to make extra sure it's 100% sealed 🤗🌈
😂you’re DEFINITELY not alone in that! I’ve made the same mistakes!😂
Gorgeous! Great idea!
Thank you so much and thanks for watching 😊
it is so awesome in the light, great idea
Thank you so much Mary-Lou and thanks for watching 🤗🌈 I could stare at it all day long 🤣😅
Just beautiful!
Thank you so much and thanks for watching so many of my videos. It really helps my channel 😊💜
Wowww look at that how beautiful is this
Thank you so much and thanks for watching 😁
LOL, Trish, I have that same one that you have. My large living room window looks directly into my next-door neighbors. I had asked my son the other day if he thought we could pour resin over it and he said " mom you have gone resin happy"
Thanks for watching 🤗🌈
😅😅😅 That is too funny, it's a nice way to cover the window without having to install a curtain rod and blinds/curtains. You could 100% put the actual window film over the windows but it's a window cling and omg getting no air bubbles to show using the actual window film is such a chore. I think it's impossible 🤣 so I'll just make these for those windows 🤗
We're all resin happy, lol
😅😅😅🤣
I bought the film last year. I love the rainbow it puts on my walls when the sun hits it directly. I had some film left and I had been thinking on how to use it with resin. NOW I have many more ideas! Thanks!
Thanks so much for watching 🤗 I love the rainbow it puts on the walls too. It's so much fun making resin creations with it. I have been making suncatchers with it lately. They're so pretty 🤗🌈
You are a true treasure.
Awe thank you 🤗🌈🤗
i am still amazed how the resin picks up the holographic design from that plastic! i think that is a great idea and i am sure it is gorgeous in person! ❤ 🌹
Thanks Rose, I'm still amazed that it works too. It's so fun and pretty in person. Thanks for watching 🤗🌈
I absolutely love this!!! 😍😍😍😍
Thank you 🤗🤗🌈🌈🌈
Amazing!
Thank you 🌈🤗🌈
That is gorgeous
Thank you so much and thanks for watching 🤗🌈🤗
Very pretty 👍
Thank you 🤗🌈🤗
Yes! So very nice. I have morning sun in my living room and lots of birds. This would be perfect for me and the birds. THANK YOU!
That would be so beautiful 😍 It will look fantastic 😁 thanks for watching 🤗
Very pretty
Thank you so much and thanks for watching 🤗🤗🤗
Its beautiful, thank you for your video
Thank you so much and thanks for watching 🤗🤗🤗
Coolest ever!
Thank you so much and thanks for watching 🤗🌈
That is beautiful
Awe thank you so much Marilyn 🌈🤗🌈
This just mystifies me. I want to use that design on EVERYTHING! Coasters... jewelry.... any flat surface I have! Its become my favorite thing to watch you do!... XOXO
I could stare at it all day long 😅 I love making these. Thanks so much for always watching and leaving me kind comments. I appreciate you 🤗🌈
💯 lol
Давно пора, сейчас даже уже спад интереса к голографическим поделкам.
И это с учетом времени написания вашего комментария!
I just ordered this so tfs. It comes in today. So excited
Awesome, I'm so excited for you. You are going to love using it. It's so pretty in person. Thanks for watching 🤗🤗🤗
This is so pretty. 😊
Thank you so much and thanks for watching 😊💙
That's so beautiful ❤️❤️
Thank you so much 🌈 🤗 💓
Beautiful!! As I was watching this I looked over at the leftover window cling film I have and thought about the silicone calk I have and my heart leap with joy!!! Thank you soooo much for sharing this!!!
Oh that's awesome, this will be a great project for those. Definitely give it a try. It's fun to make these. Thanks for watching
Omg this is genius!!😍😍😍😍
Thank you 🤗🌈🤗
Wow! Gorgeous Tish! 😍
Thank you 🌈🤗🌈
Incredible!, WOW
Awe thank you 😁🤗💙 I had so much fun making this. I want to try to make a lamp next 🤗 thanks for watching 💙
@@naptimecreations ooooh, fabulous idea! 🤗
@@melissaphillis7247 🥰🥰🥰🥰🥰
Awesome.....love it. 🥰🌹😘🤗
Thank you so much my friend 🤗🌈 & thanks for watching 🤗
Very cool! 💖💖💖👏👏👏🇦🇺
Thank you 🌈🤗🌈
so pretty! love this art. Thank you!
Thank you so much and thanks for watching 🤗🤗🤗
omgosh that is amazing
Thank you so much 🌈🤗🌈
So incredibly beautiful, thanks for sharing this with us all 😊
Awe thanks Joni 🤗🌈 Is it bad that now I want to make one for all my windows 🤣😅 thanks for watching 🤗
Gorgeous!!
Thank you so much and thanks for watching 🤗🌈🤗
Absolutely beautiful
Thank you so much and thanks for watching 🤗🤗🤗
What an awesome idea! This is so beautiful.Love the reflection it gives.
Thank you 🤗 it's so cool in person. I love making things with this stuff. Can't wait to make some more soon. Thanks for watching 🤗
Wow, beautiful!
Thank you so much and thanks for watching 🤗🌈🤗
Fabulous! So creative! Love it!
Thank you so much and thanks for watching 🤗🌈🤗
Shared. Loving this! It's so pretty ✨
Thank you 💜 this is such a fun project. I need to make some more asap. Thanks for watching
I love it!! I can think of a billion things to do with this! Thank you!
It's so much fun, you are going to love making stuff with this. Thanks for watching 🤗🤗🤗🌈🌈
Fantastic!!
Thank you 🤗🌈🤗
How am I not subscribed to you Tish!? I KNOW I was! I just LOVE the way this looks. I have a couple of triangular windows that will be very costly to cover. You just gave me a great idea! I can build a frame and hang from the window seal! Thanks for the tutorial!
Awesome, thanks for watching and subscribing. I'm so glad this was helpful. These are so pretty when the sun shines through them. They're great if you still want to be able to see out of the window which is what I wanted.
Your idea sounds amazing, please let me know how it turns out 🌸🌸🌸
@@naptimecreations I will!!!
Amazing
Thank you 🤗🤗 I love making these, they're so pretty in person. Thanks for watching some of my videos back to back it really helps my channel 🤗🌈
I love it! So pretty!
Thank you 🤗🤗🤗
Turned out beautiful 💕
Thank you 🤗🤗💟💟💟
This is really beautiful love it fabulous idea thank you sharing
Thank you 🌈🤗🌈
Absolutely gorgeous! 😍😍😍😍. I can't wait to try this!
Thank you 🌈🤗 Definitely try it asap you are going to love it. Thanks for watching 🤗🤗
Super pretty 😍
Thanks Mandy 🌈🤗🌈
What a brilliant idea, thank you for sharing, I love it 😍
Thank you so much and thanks for watching 🤗 I hope to make some more like this soon. They're so pretty in person 🤗
Amazing! When I get the gumption to try my hand at Resin coasters and Art You will be my “go to girl”. I love this.
Awe thank you 🤗 I'm happy to help anytime 🌈 I warn you resin is addictive 😅 I started out my fluid art journey only with paint pouring. Then I tried clear coating my acrylic pours with resin and that turned into a full blown resin obsession 🤣
This is very beautiful Tish what a great idea I bet if you had them in shapes they would make for great snowflakes ❄️ 😊💜✌🏼
Ooohhh that's a great idea💡love that. Thanks so much Gina 🤗🌈
Very very nice project ! I love the result with this holographic film 🤩🤩🤩💙💙💙
Thank you so much my friend. Working with this stuff is so much fun. Thanks for watching 🤗🌈🤗
I got mine today. So excited to see this again and how to do it
Yay, that's awesome. Thanks for watching again, you are going to love making these. Let me know how it goes. Just remember to pour on the rainbow textured side not the flat back side. And let your 100% silicone caulk dry for 24 hours before you pour your resin 🤗🌈
Wow! It's fabulous! 😁 xx
Thank you so much and thanks for watching 🤗🤗🤗🤗🤗
Wow that is unique. The prisims cast a beautiful aray of colors. You're such a talented lady!
Awe thank you 🤗🤗🌈🌈🌈 I love making anything with this stuff it's so pretty in person. Thanks for watching 🤗
That's really amazing!!! So beautiful!!!!😁💯😍💥
Thanks Cindy, I love making these. Thanks for watching 🤗🤗🤗🌈🌈
Very pretty 😍 You are so creative!💕
Thank you 🌈🤗🌈 & thanks for watching 🌈
Its such q beautiful technique you shared really love the results 😍❤💕
Awe thank you so much my resin friend 🤗🤗🤗🌈🌈
What a great idea and so pretty. Love it Tish. 🥰❌☘️
Thank you 🤗🤗🤗 I love making these they're so fun to make. Thanks for watching 🤗❤️
Wow! I love this idea, Tish. I can’t believe how nice this came out. 👏. I think I will try this for one of the windows in my home in Florida. I know exact which window too! Lol. ❤️
Thank you 🌈🤗 you should totally make one for your home in FL that would be awesome. It's so pretty In person. The camera doesn't do it justice. Thanks for watching 🤗🌈
Really Cool! I also like that you are wearing a VOC Mask - too many resin artists are sending a bad example by NOT wearing them. Again, thanks for posting this amazing video!
Awe thank you so much and thanks for watching 🤗 & I agree with the mask I always wear mine eventhough it's uncomfortable. We have to keep our lungs safe.
When I started out with resin I didn't wear a mask because the UA-cam channels I watched didn't wear one. Then I asked for the msds sheet from the brand of resin I was using and after I read it I bought a respirator that same day and have worn it ever since😊
Don’t feel bad about not measuring it first.
First time is always the learning stage.
This is absolutely amazing! It is so cool. Can’t figure out how the colors get in there LOL I guess I have a lot to learn about this. I guess it’s the colors from the room reflecting?
I love watching your channel and seeing all the new things you do.
I’m doing this for sure.
Thanks for Sharing👍
Thanks Sherri 🤗🌈 you have to try it out. It's soooo cool. The colors transfer from the window film onto the resin. Idk how it works but it does & you can keep reusing the film over and over. The colors stay put on the window film 🤗 thanks for watching 🤗🌈
Wow amazing , I bought this window film after watching you make coasters , Iv yet to try it ( busy decorating )
Thank you 🤗🌈 It's so much fun to make things with it. You are going to love it. Thanks for watching 🤗
That is so so pretty Tish, I have some of that paper, I have to get it out and make one of these, it’s so pretty and easy to get a cool effect.
Girl you have to try it, it's so easy and they're stunning in person. The camera doesn't do them justice. When the sun hits it. It's so awesome 🤗🌈 thanks for watching 🤗
Oh I love the opportunities that this brings its beautiful and I love it in your window love the prism I was thinking make it into for sun catchers coasters trays the opportunities are endless great idea Trish enjoyed your video thanks for sharing xx
Awe thank you so much and thanks for watching 🤗🌈 I love making things with this. You can really do a lot with it. Suncatchers would be stunning with it 😍 forgot to say you don't want to top coat anything you make with it because it will take away the holographic effect 🌈
@@naptimecreations awwhh your most welcome and thanks for telling me not to top coat because I proberlt would of xx
@@annagravante3884 🤗🤗 no problem 😊
Tish this is one of the most beautiful things I have seen!!! I really love it and it was so simple to do :) -Syndie
Awe thank you so much Syndie, it really is so easy and fun. You can get really creative with it. I'm excited to make some more pieces soon 🤗 thanks for watching 🤗🤗🌈🌈🌈
😍
Thanks for watching 🤗🤗🤗🤗🤗
I have had this window film in my amazon chart for a while now, but I keep finding other things to buy. 😂 It is definitely staying in the next order!
Definitely get it, it's so fun and you can do a lot of cool things with it. I was thinking making a cylinder lamp would be so cool. Thanks for watching so many of my videos. I appreciate you 🤗💙🤗
@@naptimecreations I think that lamp would be really cool.
Right 🥰 I think so too 🤗
That's awesome! But I think instead of using up my resin I'd just put the window film on the window! Well, unless the film isn't clear like the resin is.
You're the expert! What do I know!? Lol
Lol, you could do that but I wanted to make a resin project with it instead of just sticking it on the window. Thanks for watching
That thinness would be perfect if you wanted to bend and sculpt it. Also you can make an amazing stained glass. Put template under the film. Make the “leading” with apoxie sculpt, or liquid leading. Then pour different coloured resins. You will have colours and holographic design!
Thanks for watching 🤗💙 That's a great idea. I have apoxie sclupt. I did make a set of coasters with this technique in a previous video. I made one blue and one clear. The holographic effect didn't show to well on the blue coaster. It really looks awesome on the clear pieces. I'll have to try to make a lamp next. Thanks for all the wonderful ideas 💡🤗
Holy carp! It would make a fantastic cylinder lamp! I am so going to do that nexr!
@@naptimecreations use translucent colors, so the light will show through!
@@Oonagh72 I did that 😁
@@naptimecreations ohh 😯 they looked opaque in the video. 😆
I am surprised that anyone using this has not mentioned that it has a backing on the window film. My question is if that makes a difference, it being on or off and if I could maybe use the slick side to lay on a flat mold. It is not sticky, it just stays clean for better static cling for windows, I suppose.
Thanks for watching, I've made several videos since this one and have mentioned the backing layer. If you remove the backing layer there is a static cling and you can use cut to size pieces in molds.
I have tried that and I found it difficult to get the window film to lay completely flat without air bubbles inside a mold. Resin can run under the film and if that happens it's very hard to peel the film away from the resin without causing damage, scratches, imperfections in your piece.
Tish, I've just gotten around to doing this. It's done and lying flat to fully cure. I've already taken off the cling. While it's lying flat, I wondered if I could pour some silicone rubber on it in a shape to make the holographic inlay? Appreciate all your help.
Awesome, im so glad you gave it a try. You can most definitely do that. I made a holographic mold from the resin piece made on the window film in this video ua-cam.com/video/5BSdO4BVj9E/v-deo.html
Just pour your silicone rubber onto the resin piece you made. Just make sure you pour the silicone on the holographic side of your resin piece
New subscriber here 🌸💜✨ I don't think I could do this with my little kids running around...sticking to painting with Acrylics for now.
Thanks for watching and subscribing, I do my resin in the garage when they're asleep and my acrylics at the kitchen table while they run around during the day 🤗🤗🤗
@@naptimecreations that makes sense 😊. I’m in an apartment, a garage (or studio 😜) would be so cool!
@@mimisart 🤗🤗🤗 do you have a patio? You could do resin out there in the summer time 😁
@@naptimecreations I do and it would be a great idea 💡 but very limited space 😕
I know what you mean, when we lived in an apartment I put a small desk out there on the patio and did my resin art on that desk 🤗
Hi Tish, That is so very beautiful! I've seen quite a few coasters free-form bowls with the holographic window sheets.BUT never seen anybody do a full window so that's really cool! What do you think if I myself wanted to do one for my window. When these apartments were built they put a little extra design into the window frames. So there's 2 half-moons 1 over the window and 1 over the door. And like your window they only get sun in the morning. In fact in the door itself there is 2 sketched glass with holographic diamonds in center so that's really pretty early in the morning little diamond rainbows all over walls etc. goes all the way into my kitchen. 😆 I would love more of that effect on a larger scale. Maybe I'll shoot you an email for you to do a commissioned piece 😉💗 I mean I know I could just buy it and attach it to the window. (I did that years ago with a different pattern different house) But I like the idea of making it into an art piece! So when I move I could still use it in any other window!
Thanks so much Sue 🤗🌈 I love making things with this technique it's so pretty in person. The windows you have sound so cool.
I have a stained glass piece with those diamond shapes you have on your door and I love the rainbows it creates in the am too.
I was actually going to cut this up into smaller pieces. The fact that I didn't make it a perfect rectangle shape is driving me nuts when I look at it. I have slight OCD 😅
I could make it into the shapes you need. Shoot me an email and maybe a picture of your window so I can see the size etc. 🌈🤗
My lil brain cannot comprehend this at all 🤯😂 I thought it was the actual film! And also 🧐 whatcha got going on to the right on you table? I see bedazzles 😍😍
Thanks for watching JenJen 🤗🌈 idk how it works either but it does and it's so pretty in person. You have to try it when you can. Hopefully you can resin again soon?
The bedazzled piece is a milky way painting I was working on. I kinda hate it and kinda love it. Not sure if I am going to post the video or not 😅🤗
Wow! That is a huge yardstick! What is it, about 3 feet long? 😆😆 I love your channel and everything you make is so beautiful! Thank you for bringing gorgeous colors and sparkles into our lives!😍
Editing because I wanted to say even your imperfections are still perfect! If you never mentioned that it’s not a perfect rectangle, I don’t think most would have noticed. Also I really like that you didn’t cut the edges to be straight. I love how the caulk made the edging wavy(?), is that the word I’m lookin for? Lol Thank you again for a gorgeous piece and tutorial! 🤗
Awe thank you so much 🤗🌹 I appreciate you 🌹 you could always cut or sand the edges to make them smooth but I like the rough look too.
It is a yard stick 😆 I had to buy it just for this project. It wasn't too expensive I think $5 off Amazon. You should have seen the box they sent it in. It was huge 😆 thanks for watching 🌹🤗
@@naptimecreations You are so welcome! I really like how kind you are in responding to your subscribers. I know it’s part of being a creator, but you don’t just put a generic phrase for everyone just to respond to them. You actually engage and that’s awesome. Your not only talented, but humble as well. A beautiful person inside and out! Thank you and may you keep being blessed to be able to show us your masterpieces.💕😁
@@kimmieh8419 ❤️❤️❤️ I always love chatting in the comments all the kind ones like yours make my day. They mean the world to me ❤️
@@naptimecreations 💕🤗
Beautiful - Could you make a large sheet of it then cut it into shapes? I have order some film.
Thanks so much and thanks for watching. You can definitely pour a large sheet like this and cut it into shapes. That's actually what I ended up doing with this one. 🤗🌈
Beautiful! As you were unmolding, I was thinking how pretty it could be rolled upin a cylander for use as a pretty lamp! I have some of this film, as well as some with a holo floral pattern. I wish they made many more patterns of this stiff, but I haven't found much.
Ooohhh a lamp would be amazing 😍 that's a great idea
Now you have my mind spinning with ideas💡thanks for watching and always leaving me such kind comments. I appreciate you 🌈🤗
@@naptimecreations b
@@Thunderpaws111 🤗🤗🤗🤗🤗
just a thought what if you put string led lights behind the window? does it light up like a rainbow?
😍😍😍 that's a fantastic idea, I'll have to try that asap. Off to order some string LED lights off Amazon. Thanks for watching 🤗
Hi Tish, I love this. Can you create silicone inlays directly from the window film. I tried that but my silicone did not cure. Thank you.
Hi, no pouring the silicone onto the window film doesn't work.
You have to make a resin piece on the window film, then you can make a mold from the resin piece made on the window film.
The mold can be made off the resin piece only.
The silicone isn't compatible with the material the window film is made of.
@@naptimecreations That’s what I thought because I never have issues with my silicone not curing. Thank you so much, you are the best.
If you allready have a resin piece with this effect Made with this sheet.. can you use that resin piece to make a mold of it?
Yes you can 🤗
WOW, Hey Tish how is this holding up? It's gorgeous for sure.
Thanks Pam 🤗 I actually cut this into several smaller pieces and sold them as suncatchers but I kept 1 and its doing fine
@@naptimecreations OK, cool, Thank you
@@pamcolechadwell1302 no problem 🤗❤️
Wow! That is truly stunning & I love the rainbows it creates. Just a quick question though (& it could just be me being daft) - why can't it stay in the sun?
Thank you so much and thanks for watching 🤗🌈
Mainly it needs to stay out of the direct sunlight because it can cause the resin to yellow quickly & if it gets really hot it can warp / bend from the heat.
Thanks for explaining it. I really appreciate it x
No problem 🤗🤗🤗🌈🌈
Can we pour silicone right onto the window film?
No, the silicone isn't compatible with the material the window film is made of. The silicone won't set up if you do that.
Would doming it take away the effects?
Thanks for watching, yes doming would take the effect away. 🌈
can you use the window sheet more than once
Yes
Hi do you think instead of making the mold can it be cut and put inside a silicone mold? What do you think? Greetings from Puerto Rico, love your tutorials
Thanks so much for watching Linda 🌈🤗 It won't work inside a silicone mold. You have to make your own mold with silicone caulk right on top of the window film like I did in this video 🤗
Thank you
No problem 🤗🌈🤗
I don’t understand how this works, how does it transfer the holographic effect over to the resin and can you use the paper more than once?
Thanks for watching 🤗🌈
The holographic window film itself is textured. The holographic effect is basically an imprint / microscopic engraved effect.
When you pour your resin on top of the window film the resin takes on the imprint and pattern that's on the window film. Making your resin pieces holographic and textured on one side.
You can reuse the window film over and over. It's reusable the holographic design/effect stays on the window film forever.
Keep in mind with this technique you can't top coat the resin pieces you make. A top coat will make the holographic effect go away.
Also when you try this make sure you are pouring your resin on the holographic textured side of the window film. Don't pour on the flat backside of the film.
Hope that all made sense.
So the resin has to be thin to work?? I tried this but failed! The resin had groves in it but it did not make the rainbows. I’m not sure what I did wrong!
It doesn't have to be thin. It works on thicker pours too. I made thicker pieces in this video
ua-cam.com/users/shortsJ2BJVzSFiPg?feature=share
You want to make sure you are pouring on the textured holographic rainbow side of the window film.
@@naptimecreations ok I’m going to watch. UV resin just melted the window covering. I love your videos! It’s very easy to follow along even for a super newbie like myself!! Thank you! Please keep making videos of cool stuff!!
@@cristinamccall6759 thank you 🤗💟
Hi, After how many hours am I allowed to remove the mold from the silicone?♥️😘
Thanks for watching, I would wait 24 hours to demold it 🤗
@@naptimecreations Thank you for your feedback.♥️♥️♥️
@@Taha-gomar-2023 no problem 🤗🤗🤗
It's too late to comment, I know, but just in case you'll respond, here goes-
I'm very curious if the sheet you made allows more light to go through than the original film. The original film blocks about 35% of the visible light according to the spec sheets I've looked at. But looking at you holding the your resin film above the floor, it seems as if it does let more light through than the film I've been using of the same design.
So I'm wondering if you could try holding both films side by side, and looking to see if the original film cast a dimmer shadow than your resin film, and report back? If it doesn't, it would save me a ton of effort to get all the supplies to try making a resin sheet myself in the hopes of creating a version of this film that let's more light through.
I would say they're about the same. I didn't have the panel the entire size of my window because I wanted light to come in around the panel and not cover the window completely.
@@naptimecreations Awesome, thank you so much!
@@Dev-lc4cd no problem
@@naptimecreations I would like to place an order for a resin or acrylic "coaster" copy of this film, so I can analyze the look of the resin copy and compare it with the film I have. Is that possible?
@@Dev-lc4cd I have some that are pre made they're not poured deep for coasters though. It's made of resin.
I am unable to make acrylic items.
It was a test piece I made a mistake and drilled too many holes. I can send it to you for $1.00 if you want to pay the shipping cost. Message me on etsy.
www.etsy.com/shop/NaptimeCreations206?ref=search_shop_redirect
Can you reuse the holographic paper?
Thanks for watching 🤗 yes you can reuse it over and over the holographic effect stays on the holographic window film even after you have poured on it 🤗
@@naptimecreations Thanks so much, you got such a beautiful result!!!
@@geriann4755 Thank you 🤗🌈 it's so fun making these. When you try it make sure you pour on the holographic rainbow side of the film 🤗
Hello, I put the silicone on the rainbow film for 24 hours, but when I try to separate the silicone from the film it still sticks and the silicone material does not dry completely under work, what is the problem? 😔
Help me if you can.🙏🙏😘
Thanks for watching, some brands of the silicone caulk do stick to the window film.
What brand of silicone are you using? It has to be 100% silicone caulk. It should say it on the package.
If the silicone sticks just toss that piece and try again with a new piece of the window film 🤗
@@naptimecreations Thank you for your answer. I use German LM brand silicone and I can easily remove the mold from the silicone after molding any kind of object after 3 hours. I only have a problem with the rainbow foil that does not stick under the work, ie the silicone material on the foil. It is a rainbow, it does not stick even for more than 24 hours, if I do not touch it, it will not stick again.
@@Taha-gomar-2023 that is so strange, maybe it is the window film. Do you know the brand you are using? I use this brand you can get it off ebay or Amazon. The brand name is volcanics the product is calles window privacy film
www.ebay.com/itm/353337316590?_trkparms=ispr%3D1&hash=item52448b94ee:g:KkIAAOSwPGBf7diG&amdata=enc%3AAQAGAAACoPYe5NmHp%252B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsSd0ReTLyM7cxPnI6zs468EBhHg%252BrHzbCPM3NUyNmv7zM6NaWnWRrg8pJ2tRkmr5YsG%252FqT6mDXkmdqG%252FBHqqd2sYMBhq5tM040EFrs4Dd3rZCGjEX6Nu9ztvbBGJC7vaDQ584QZKI5ZH0W55QNN26OzkTxemw2V4JQWrANbimk4rApCdHRbm6rXZIFT481aw6rhHCpUQKfb9dOGo%252FYYmCtajgrfghj1CzqJq1ew9UUoK8fxF043qPEfoeUA%252FlsUaqXQEkQW1ioXvN60CDvdC9KwL0VccQI1JMwp87H0wen8PGFevSBHIYRTbWLD41LdVvKWaQrfSe9FHILIvTcSDbAdBFBJbaHpdUlsyPYlqEQKieLQ4bdmpihWJYoaT4yEL%252FzHutEYcTA5Pf8eUKpcD%252FIY5UflkV3Qw0%252B98%252Bc8rkztgKZRnOzPNRwctybRzw6HgKb2H1B2FvJ3lqxH6A6QmU3jOOF3faBxFa0dVpuSCFBXbWUZB7HjCo7GCaG0Y4BQKjWbLE3ygp4%252Br9EAzNCSeI%252BcnZvY8Q2Rh4jVlPSYe1BwJO0qP4eDAxHwQC9Tw%252F11GyRhuZPAFhHmtXIUrhD4ynQkcN%252Bd62tb%252FO008%252BkGalJbVm80LjynRLrb27QyFCHVQ3TnISrFBhOF5o%252BrHBbdwRFve9JM6E8XKkdAn9XyK2vJpiMP3PMmsl4MKXrpfKgH9dqo26rbmNgqLnM83mBHcYq6S82XbNEK72aAyKOJ42KH%252FUXgYLHrO21e7Td8bYvEmkmhanfR4zNiuQh2y4aRcIaGfR8HwAofd%252FI2OapDVBJnXgAclsyB%252FaFAGQ%252F1nqT8ZrROBSJjBC9HUbDoNUJA1t%252FzA%253D%253D%7Cclp%3A2334524%7Ctkp%3ABFBMzJX1vMZf
I am so upset , I have watched this nd another one that mentions you so many times....no mater how I do it , it does not work....I tried making a holographic big butterfly , but no holographic effect showed up. I have the window film, same one as the link shows, and another one....both do not work...and I am making sure I do it on the holographic side. What could I be doing wrong? also I tried defraction paper that worked , I made some silicone mold inserts with defraction paper , that also worked..yay....but I want to be able to do it with window film because of the different patterns ...please help ..I buy Julie's molds too , but would love to make some of my own
Thanks for watching, I'm so sorry it's not working. It has worked for me and others really well. Is you workspace 100% level and there's not wrinkles in the window film?
Also you want to pour on the textured holographic side. Sometimes From the back it can look holographic but that side is flat and has no texture. You don't want to pour on that side. Only pour on the holographic textured side.
@@naptimecreations i have a leveling board but maybe its because it had a silicone mat under it. I have done it a couple times and know it was on the holographic side. Maybey film is just. Not the right stuff. Because i did a slab if silicone on defraction film and part of it over the window film and it worked over the defraction film but only the texture came out but no holographic came out. I hate to buy more window film and its still doesn’t work. Thank you so much for answering my question
@@sherryebersole1349 that's so strange, I use the volcanics brand window film off Amazon it's only $7 a roll.
Hello, can you please tell me the exact name of the paper so that we can buy it?
Volcanics window privacy film. It's available on Amazon or eBay. Thanks for watching 🤗
@@naptimecreations 🙏
@@naqmehmajidikhah9944 🤗🤗🤗🤗
😍👍👈
🤗🤗🤗🤗🤗🤗🤗
Why does mine not work I got the same window film. And still can't the effect in my mold.
Are you using it inside a mold? I've never had success using it inside a mold. I make my molds directly on top of the window film with 100% silicone caulk.
Yes I'm pouring it directly over my molds with the film up
I don't all that but make a barrier and put molds down with film up right and sealed to it and pour silicone over it. Doesn't work 😕
@@jennifermartin2709 I've never been able to get it to work inside molds. I have only had success with it like the way I did it in this video. Making the molds with 100% silicone caulk right on top of the textured side of the window cling film.
Everytime I've tried to use it inside a mold it didn't work for me.
@@jennifermartin2709 in this video she shows how to use it inside molds. I've never had success with it this way but it works for her in this video
ua-cam.com/video/0OS72BBVaq0/v-deo.html
Question? Why didn’t you just put the film directly on the window
Thanks for watching, that wasn't the plan I had for it. You could do that but I didn't want to. I wanted some sun to still shine through the window.
You can also turn these into suncatchers as well. I have a different tutorial showing how I do that.
Couldn't you put another slice of hologram on top?
It would cause a lot of air bubbles
You shouldn't hang it in the window, from what most say, the heat will melt it.
Thanks for watching, it depends on the window, if the window is in direct sunlight all day then no. If the window has a little sun exposure during the day it is fine. 🤗
Please forgive me if this sounds silly, but why don't you just put the film on the window?
Thanks for watching, I wanted to try to make a resin diy project with it instead of putting it on the window 😁
@@naptimecreations Fair lol I get that totally! I am prepping for using it to make a freeform vase, wish me luck :) It does look lovely by the way :)
@@thelazychefuk4410 that sounds like a fun project, good luck. I have yet to try one of those. They're very pretty, I'm sure yours will be beautiful 🤗