You guys really need to stop advertising stuff as "available for purchase" when you have nowhere near enough inventory to fulfill orders. People have been waiting for months with no updates.
@@KallMeKG There is a supply shortage. But I just got my advanced ring yesterday. Apparently I was #4 on the pre-order list. I sent an email to customer service and they said it would still be another month, and then miraculously I got it 1 week later.
Ignore the printed instructions for pairing as they don’t work! The tutorial here is accurate and far more helpful.Finally got mine after too many months of waiting 👍🏻
Hey man I saw in another video that the connection point between the gimbal and the ring doesn't actually hold perfectly tight and that there is a small play even if you tighten as hard as possible 🥴 is this true?
@@PHUKU not mine but i haven’t pushed the load too high. Am trying a Komodo with Canon Cine Lens and Teradek so that might push it a bit more. I’ll get back to you if there’s any play.
I'm so exited for this ring. Ordered straight away back in november. Hope it will arrive soon (like everyone else) haha. This ring will take my RED Komodo kit to the next level and with a bit of luck this works so well we can retire the Movi Pro for gimbal work :)
I am trying to get my DJI focus motor to work on this setup (DJI - RS3/Advanced Ring Grip) I have the toggle on joystick handle set to "df" (dji focus motor). When switched to "tf" my Tilta Nucleus Focus motor works perfectly and is controlled by other handle with focus thumb wheels, but when toggled to "df" I can't get my DJI focus motor engage or work. Any idea? Does the other handle with 2 spin wheels need to be completely off and only the joystick handle on to make it work?
Tilta... of all the great equipment you make, my brother in Christ are you not thorough with tutorials. An advanced menu dive-in would be my saving grace right now, but every UA-camr is focused on lego building the ring up and then showing a highlight reel instead of actually showing how the thing functions in and out. Didn't think the company who made the damn thing would have the same problem. Sigh.
I got my advanced ring in and I'm trying to pair 2 nucleus nano motors to the wireless lens control handle. I can pair a focus motor using the front dial and that functions fine, but when I want to pair a second motor for zoom how should I set it up? If they are both on the same wireless channel the focus dial will control both and the zoom dial does nothing.
@@hippy3000 The answer I got from Tilta is that the nucleus N can't do multi channel, so you have to use the lens control handle to control one motor and the camera control handle to control a second motor. The dual lens handle is for nucleus M. Unfortunate that they don't market that very well, because I'd like to use the camera control handle dial for iris control only, but I have to split duty with a focus motor using the switch.
in this video it makes clear that you can pair a handle with the nano. But can we assign the handles to use the Nucleus M? I mean right handle for zoom module and left for focus module. I guess it is possible, right?
Hey @Tilta ! Looking forward to receiving my unit. QUESTION: Is it possible to attach two v-mount modules for hot swapping and balance? And is it possible to attach two power modules? Thank you for taking the time to address this.
@@TILTAI have a problem with V-mount plate from the beginning. Plate doesn't work. Nattery should work immediately after installation or maybe I need to change settings on rs2? i will be grateful for your response
If I want to use a 1st AC pulling focus with the handle grip on my DJI Focus motor, I am left with only one handle grip for myself. So what handle grip product do I need to buy to replace the one my focus puller is using? Are there options beside buying another $200 USD grip handle for the ring?
Is there a video that describes how to re-calibrate the control wheel on the remote control handle? The manual has no information on this. I am able to get to the calibration mode in the menu, but do not know the steps or button press combinations to do the calibration procedure and store it.
Hey TILTA I just get the Basic Ring, my question is if you figure it out about the power, for example when you connect the Ronin battery as HANDLE the power start running thru the FULL RING, there is no way to use the power just when you turn on the camera right??, so the battery is sharing the power even if there is no gimbal attached. I figure it out when I leave the ring setup for 2 days with full battery and sudden the battery was completely dead..
Unfortunately the Ring Grip will pull a small amount of power when a power source is attached even when you are not using the gimbal. This isn't enough to be an issue while shooting, but we recommend not leaving power sources connected when the Ring Grip is not being used!
My advanced ring grip is paired to the RS2 but right now I don't have the ability to control the RS2 tilt/pan/focus? I have tried turning the unit on/off multiple times, taking it apart and putting it back together, repairing the handle to the tilta wireless module on the RS2, switching the DF/TF switch but neither are working. I usually use the power outputs on the ring to power a Ninja V as well as a Nanlite Mixpad 11c but for the sake of troubleshooting have disconnected these items. The RS2 and Tilta Advanced Ring Grip have previously worked fine for the past 12-18 months and only running into this issue today. Tilta please help?
After disconnecting the wireless module once more and reconnecting it I now have the ability to control pan/tilt/focus. I have a sneaky suspiscion Tilta's wireless unit that you mount onto the RS2 is not fantastic as I've run into this same issue multiple times in the past.
Hi thank you for the video. I am curious to know roughly how long the whole system would run on a single DJI battery. Also is there an optional bracket or rigging part to attach this to an easyrig?
The Ring Grip will power just about as long as the RS2 will off just the battery handle! As you power additional accessories, the overall battery life will become shorter
Hi and hello from Hamburg. Thank you for your great videos, keep it up!!!! I now also have a ring grip advanced and apparently I have a problem. maybe you can help me. I plugged in the rs2 battery handle at the top and a vmount battery at the bottom. Everything works too. However, the Ronin's battery grip will fully discharge within 1.5 hours. Is that normal? Do you have to adjust something somewhere? vg marco
All you need to do is set the handles to the same channel as the motors and assign the motor number to the dial you would like to use! Please contact our support team for further clarification: support@tilta.com
Is the wireless control module powered separately in some way. I have my RS2 on the ring. I bought separate batteries for the handles. They turn on. The gimbal powers on (with the RS2 handle mounted to the top of the ring as in the video). But when I attach the wireless module to the side of the gimbal at at the 3:25 mark of the video, the wireless module doesn't turn on. Is there some kind of additional battery I'm missing? Or do I have a defective module?
I highly doubt it because the top battery grip distributes power to the gimbal if you arent't using one of the vmount or gold mount plates. So you can imagine there is some cabling entering the ring from that position.
Great Stuff! Is there any Chance for releasing an RS2 Bluetooth Module for the Blackmagic Pocket Cameras? Since they dont have LanC, it's a huge Pain that you have to use the only USB C Port as Start/Stop on the Pocket.
Bought the Advanced Ring and tested it out last night. The system completely fried within the first hour of use - both the ring and RS2. I hope you address this - it is a known problem and makes this unusable as a professional tool. I no longer trust Tilta.
Im starting to read a lot of comments like these, found one in B&H and it also happened to an user of a Facebook group im part of, im very worried about this. You say you have the advanced ring, did you had the v mount battery plate attached?
With the Vmount and the RS2 battery handle attached, will both batteries power all accessories mounted to the ring grip? If so, which battery will drain first, the vmount or the handle?
The Packing List for the Advanced Ring Grip ($499) is: Ring Grip Part I（TGA-BRG-UP) x 1 Ring Grip Part II（TGA-BRG-DOWN) x 1 Remote Control Receiver Module for RS 2 RS 2 Remote Control Handle for Advanced Ring Grip（TGA-ARG-RCH）x 1 Dual Channel Wireless Lens Control Handle for Advanced Ring Grip（TGA-ARG-WCH) x 1 Other accessories such as battery plates and breakout boxes can be found here: tilta.com/product-category/dji-ecosystem/advanced-ring-grip-for-rs-2/
Is it normal, that the battery handle discharges after some time automatically when plugged in, even when the gimbal is turned off? I had it fully charged and without using the gimbal, it uncharged completely after a few days (maybe even hours).
You guys really need to stop advertising stuff as "available for purchase" when you have nowhere near enough inventory to fulfill orders. People have been waiting for months with no updates.
Amen
@@KallMeKG There is a supply shortage. But I just got my advanced ring yesterday. Apparently I was #4 on the pre-order list. I sent an email to customer service and they said it would still be another month, and then miraculously I got it 1 week later.
Tough shit
It took them 3 months to manufacture a single ring grip for this video 😂
It’s going to be a long wait...
You guys keep advertising your products but it's been 2 months didn't receive just rs2 handel. You guys need to work on your production
It’s same for me
Same! its almost 3 months for me
Maybe this will ship before the RS3 is announced
Ah yes. I remember buying this * almost three months ago * ...sigh.
Same!
Well buy us all one then
@@YoungBlaze so that you can also experience the joys of a backordered product?
@@MoonlightSocial yes
Going on 5 months. Tilta is starting to piss me off.
Ignore the printed instructions for pairing as they don’t work! The tutorial here is accurate and far more helpful.Finally got mine after too many months of waiting 👍🏻
Hey man I saw in another video that the connection point between the gimbal and the ring doesn't actually hold perfectly tight and that there is a small play even if you tighten as hard as possible 🥴 is this true?
@@PHUKU not mine but i haven’t pushed the load too high. Am trying a Komodo with Canon Cine Lens and Teradek so that might push it a bit more. I’ll get back to you if there’s any play.
Mine arrived today and the printed manual seems to be wrong in how to enter menus, but the video is correct. Defintely a big help!
Thank you! How do you pair the second handle?
I have the same question
I'm so exited for this ring. Ordered straight away back in november. Hope it will arrive soon (like everyone else) haha. This ring will take my RED Komodo kit to the next level and with a bit of luck this works so well we can retire the Movi Pro for gimbal work :)
Every comment is in English but the video is not in English. Cmon Tilta.
I am trying to get my DJI focus motor to work on this setup (DJI - RS3/Advanced Ring Grip) I have the toggle on joystick handle set to "df" (dji focus motor). When switched to "tf" my Tilta Nucleus Focus motor works perfectly and is controlled by other handle with focus thumb wheels, but when toggled to "df" I can't get my DJI focus motor engage or work. Any idea? Does the other handle with 2 spin wheels need to be completely off and only the joystick handle on to make it work?
Any luck?
really great product, i really want to test the float system
I wonder when they will arrive, been months waiting..............
Very cool, now let me buy it..
Can’t wait for it to arrive!🙌
Tilta... of all the great equipment you make, my brother in Christ are you not thorough with tutorials. An advanced menu dive-in would be my saving grace right now, but every UA-camr is focused on lego building the ring up and then showing a highlight reel instead of actually showing how the thing functions in and out. Didn't think the company who made the damn thing would have the same problem. Sigh.
Thanks for the feedback, we will use it in the future
I got my advanced ring in and I'm trying to pair 2 nucleus nano motors to the wireless lens control handle. I can pair a focus motor using the front dial and that functions fine, but when I want to pair a second motor for zoom how should I set it up? If they are both on the same wireless channel the focus dial will control both and the zoom dial does nothing.
Did you figure this out? I have the same problem
@@hippy3000 The answer I got from Tilta is that the nucleus N can't do multi channel, so you have to use the lens control handle to control one motor and the camera control handle to control a second motor. The dual lens handle is for nucleus M. Unfortunate that they don't market that very well, because I'd like to use the camera control handle dial for iris control only, but I have to split duty with a focus motor using the switch.
in this video it makes clear that you can pair a handle with the nano. But can we assign the handles to use the Nucleus M? I mean right handle for zoom module and left for focus module. I guess it is possible, right?
Dang yall killing it with these rigs
Then where’s the fun of having the gimbal travel friendly...
Hey @Tilta ! Looking forward to receiving my unit.
QUESTION: Is it possible to attach two v-mount modules for hot swapping and balance? And is it possible to attach two power modules?
Thank you for taking the time to address this.
You cannot attach 2 V-Mount batteries without a shark fin, but you can power the Ring Grip with both the Battery Handle and V-Mount Plate!
@@TILTAI have a problem with V-mount plate from the beginning. Plate doesn't work. Nattery should work immediately after installation or maybe I need to change settings on rs2? i will be grateful for your response
If I want to use a 1st AC pulling focus with the handle grip on my DJI Focus motor, I am left with only one handle grip for myself.
So what handle grip product do I need to buy to replace the one my focus puller is using?
Are there options beside buying another $200 USD grip handle for the ring?
I have the dji RS3 normal NO PRO ITS WORK WITH IR TOO?
happy 4:20 guys 7:34
Focus arm won’t pair, it keeps searching. How can I pair both arms?
Is there a video that describes how to re-calibrate the control wheel on the remote control handle? The manual has no information on this. I am able to get to the calibration mode in the menu, but do not know the steps or button press combinations to do the calibration procedure and store it.
Mine is not binding. Incredible how unreliable some products are ...
Hey TILTA I just get the Basic Ring, my question is if you figure it out about the power, for example when you connect the Ronin battery as HANDLE the power start running thru the FULL RING, there is no way to use the power just when you turn on the camera right??, so the battery is sharing the power even if there is no gimbal attached. I figure it out when I leave the ring setup for 2 days with full battery and sudden the battery was completely dead..
Unfortunately the Ring Grip will pull a small amount of power when a power source is attached even when you are not using the gimbal.
This isn't enough to be an issue while shooting, but we recommend not leaving power sources connected when the Ring Grip is not being used!
Ordered mine end of December and still waiting...
How about the other handle? How to unlock functions? Not included po
OMG, you can control the Nucleus Nano, thats huge!!!
My advanced ring grip is paired to the RS2 but right now I don't have the ability to control the RS2 tilt/pan/focus? I have tried turning the unit on/off multiple times, taking it apart and putting it back together, repairing the handle to the tilta wireless module on the RS2, switching the DF/TF switch but neither are working. I usually use the power outputs on the ring to power a Ninja V as well as a Nanlite Mixpad 11c but for the sake of troubleshooting have disconnected these items. The RS2 and Tilta Advanced Ring Grip have previously worked fine for the past 12-18 months and only running into this issue today. Tilta please help?
After disconnecting the wireless module once more and reconnecting it I now have the ability to control pan/tilt/focus. I have a sneaky suspiscion Tilta's wireless unit that you mount onto the RS2 is not fantastic as I've run into this same issue multiple times in the past.
Is this system mostly being used by Chinese videographers?
A LOT of reviewers are saying this thing FRIED their DJI stabilizers! That's a huge expensive risk!
does this work on the ronin sc?
Hi thank you for the video. I am curious to know roughly how long the whole system would run on a single DJI battery. Also is there an optional bracket or rigging part to attach this to an easyrig?
The Ring Grip will power just about as long as the RS2 will off just the battery handle! As you power additional accessories, the overall battery life will become shorter
Can you Attach all Three battery styles at once? or multiple V-Mount Batteries?
Great tutorial, looking forward to get my ordered one. You payed a lot of attention to detail we filming guys need
I ordered mine 6 months ago and still no word on when it'll arrive apart from "sometime in May"....
These just started shipping!
does this work on 3d 360 roll mode?
Anyone else expiriencing little jiggles while using this ring with ronin?
Great product 👍👏👏👏👏👏👍👍👍👍👍
Hi and hello from Hamburg. Thank you for your great videos, keep it up!!!! I now also have a ring grip advanced and apparently I have a problem. maybe you can help me. I plugged in the rs2 battery handle at the top and a vmount battery at the bottom. Everything works too. However, the Ronin's battery grip will fully discharge within 1.5 hours. Is that normal? Do you have to adjust something somewhere? vg marco
Please shoot our support department an email at support@tilta.com!
@@TILTA thank you very much. Greetings from Hamburg
This doesn’t work with the rsc2 does it
can u put an dji rs3 in that Tilta Grip
Was just told this is now delayed till May.
That is correct. These are currently expected to start shipping in May
Does the goldmount battery actually fit and function with the RS3 pro or Rs2?
I'm reading a few accounts of it not
How to use / pair the other handle (the left one) to focus?!?!?!?
All you need to do is set the handles to the same channel as the motors and assign the motor number to the dial you would like to use!
Please contact our support team for further clarification: support@tilta.com
Is the wireless control module powered separately in some way. I have my RS2 on the ring. I bought separate batteries for the handles. They turn on. The gimbal powers on (with the RS2 handle mounted to the top of the ring as in the video). But when I attach the wireless module to the side of the gimbal at at the 3:25 mark of the video, the wireless module doesn't turn on. Is there some kind of additional battery I'm missing? Or do I have a defective module?
Can the top battery grip be moved to the side to accommodate an Easyrig quick release mount?
I highly doubt it because the top battery grip distributes power to the gimbal if you arent't using one of the vmount or gold mount plates. So you can imagine there is some cabling entering the ring from that position.
I'm having issues connecting - keeps flashing green light and when i double click to pair it does not connect with anything. anyone can help?
7:48 where will I get this clamp?
tilta.com/shop/v-mount-battery-plate-for-ring-grip/
Vaporware 😂
Anyone got theirs yet? Was reluctant to order because the comments spoke only about delays
These start shipping in May!
Can I install the wireless receiver to the left side?
What is range of use handle and follow focus "nucleus m" standalone (wireless)?
1000ft
Can u plz make more video on this gimbal ? Actual video video and balancing ?
Check out this one by DJI!
ua-cam.com/video/ObjjN5JxY2k/v-deo.html
Does it come with the power adapter and the v mount plate or you buy outside?
Buy separately
Is this compatible with the new RS3?
This will be like the float lots of marketing but no release date
Great Stuff!
Is there any Chance for releasing an RS2 Bluetooth Module for the Blackmagic Pocket Cameras?
Since they dont have LanC, it's a huge Pain that you have to use the only USB C Port as Start/Stop on the Pocket.
This is possible, but there is no specific word on something like this yet!
When will it be available for sale?
Currently available for backorder and estimated to start shipping this May!
@@TILTA So I can order one now and it will arrive in May?
@@nicomoreno2 It is estimated to ship in May!
Hi how can we translate China language for french or English? thx
Our French Reseller may be able to help!
tilta.com/dealer/cartoni-france/
Bought the Advanced Ring and tested it out last night. The system completely fried within the first hour of use - both the ring and RS2. I hope you address this - it is a known problem and makes this unusable as a professional tool. I no longer trust Tilta.
Im starting to read a lot of comments like these, found one in B&H and it also happened to an user of a Facebook group im part of, im very worried about this.
You say you have the advanced ring, did you had the v mount battery plate attached?
The entry for the D-Tap connector is wide enough to be flipped when plugging in. If flipped then the neg goes to positive and voila, fried gimbal.
Love the in-depth overview guide!
Will the battery handle that comes with the RS2 power all the ring? or ONLY the v mount with the Tilta Plate for Ring will do it?
Yes it will!
@@TILTA So you don't need batteries in the hand grips then?
Do you balance the rs2 before you install it on the Tilta Ringgrip?
You can balance the RS2 while on the Ring Grip!
Can you guys drop It already
This is nice and all but please tilta, concentrate on the delivery of my float and alien hydra first 🙏
Please join our DJI Ecosystem Group for a new update on these orders!
facebook.com/groups/dji.ecosystem/
@@TILTA Done. Thanks so much!
where can i buy this in the UK
You can find a local reseller here!
tilta.com/dealers/
None of the retailer in the UK 🇬🇧 got it in stock and with a big list of pre order, any idea when we likely to see the item in stock in UK
Any updates on shipment please @tilta
Currently shipping!
I cant get the zoom motor to work with the advanced ring, help needed thanks
With the Vmount and the RS2 battery handle attached, will both batteries power all accessories mounted to the ring grip? If so, which battery will drain first, the vmount or the handle?
Both will power the system and it will pull power first from the higher voltage source which will likely be the V-Mount!
@@TILTA Thanks! Any update as to when I could expect to see the order I placed a few months back ship?
@@TILTAI’m getting no power through the v-mount. I just purchased my system a week ago.
Can you attach 2 v-mount batteries on 2 separate plates?
Yes!
@@TILTA would it drain them simultaneously with half the load coming from each? And do they charge the gimbal or just accessories?
can this load Red Dsmc 2 camera?
The weight limit for the RS2 is 10lbs!
I like this guy.
When will it be released
Where can I get the Tilta cap?
Not currently available, but keep an eye out!
How do you power the nucleus nano?
via the RS2's USB-C Port and this cable!
tilta.com/shop/nucleus-nano-micro-usb-to-usb-c-nano-motor-power-cable/
@@TILTA Thanks for the answer. I see no han unit for the nano? Can you control it from dji rs2s dial?
499 for everything?
The Packing List for the Advanced Ring Grip ($499) is:
Ring Grip Part I（TGA-BRG-UP) x 1
Ring Grip Part II（TGA-BRG-DOWN) x 1
Remote Control Receiver Module for RS 2
RS 2 Remote Control Handle for Advanced Ring Grip（TGA-ARG-RCH）x 1
Dual Channel Wireless Lens Control Handle for Advanced Ring Grip（TGA-ARG-WCH) x 1
Other accessories such as battery plates and breakout boxes can be found here:
tilta.com/product-category/dji-ecosystem/advanced-ring-grip-for-rs-2/
Is it normal, that the battery handle discharges after some time automatically when plugged in, even when the gimbal is turned off?
I had it fully charged and without using the gimbal, it uncharged completely after a few days (maybe even hours).
Dows this work with Weebill s? Help