Make your Own Mark it Tool Hack for Polymer Clay
Вставка
- Опубліковано 21 сер 2024
- I love this tool but it is not available to many people in different places its a pretty easy hack and works just as well , so raid your recycle bin . My mark It tool cardboard is 6 inches X 1inch. If your looking for something to make the 3mm mark try a comb it will just leave small dots which works perfectly.
The distances are 7mm, 10mm,15mm and 20mm.
If you enjoy my videos and would like to see more you can support my channel thru purchases at my shop www.etsy.com/shop/turtlesoupbeads
Unfortunately videos not only take many hours of my time but have actual production costs involved I prefer to keep my videos free for all and greatly appreciate all those who support my channel through my shop - thank you
I purchase all the products I use so I can give a honest and unbiased review .
turtlesoupbeads
www.etsy.com/turtlesoupbeads
I love the Marxit tool but because its so expensive to ship overseas making your own is a affordable alternative
you can still purchase a Marx it tool in the USA from www.prairie craft.com
- I made this video for viewers outside the US
yes this tool is available from www.prairiecraft.com but its not available in all countries and not everyone can afford the shipping so this is a inexpensive alternative
I bought one then made your version. I find I use the ones I made all the time now. I've also made ones for my friends I've gotten hooked on Polymer clay & they love them.
I'm so glad you made this video because I actually do have one of these tools but I have no idea what I did with it!
@@RameyRocks Hi, I saw your comment one one of Susan Baily’s videos (aka Turtle Soup Beads) and wondered if you would be willing to sell your Mark it tool to me. I can’t seem to get one anywhere and it would make my polymer clay craft so much easier! I live in South Australia, which by definition is the poor country cousin of the eastern states! Hope this request doesn’t offend you, only that I’m desperate to get one of these tools. Please message me back either way. Obviously I am willing to pay P&H, in USD$ plus full cost of course, all I would need would be and address where to send the transaction. I’m genuine about this offer or as we Aussie’s say ‘fair dinkum!’
Susan, one of the great things about your channel is how you conserve resources when you are able. That is so nice especially for us retired, older folks on limited incomes. I have watched other channels, but when one cannot afford to just go buy this tool or that tool, it is refreshing to know someone out there recognizes that and has an alternative. Thank you! 💖🌷💍💎
Thank you so much!
Thank you for all the original ideas. l think a lot of people copy you but no one comes close to the talent you have. I just love all the insane amount of work you have done, and the ambition you have shown in producing these videos. Thanks again.
Thanks so much 😊
EVERYONE SHOULD MAKE THINGS AS PLAIN AND CIMMON AS YOU ..TY
Susan. I love that you made this video because well.....a person can go bankrupt buying all the tools for polymer clay, plus beads, findings, clay etc etc....silkscreens, cutters, paint, resins, powders, glitter it goes on and on!
Exactly ! And polymer clay alone is expensive
The Marxit is $14.99. That money could go for clay, embellishments or any art supplies that can't be made using your wonderful Hacks!
That's if you live in the US if your overseas its double that ! I'm with you buy clay instead
I found it at one time and put it in "a" basket, Lord know's what store's basket it is in!!! I think I will use your hack!
Once you make one you will find it ! Lol
FYI, Susan, if you want to get the curvies out of your wire...stretch it...pulling the wire will not only straighten it, it also "work hardens "the wire...aka...stiffens the wire which makes it "hold" any shapes formed with it...just some tips and tricks from an old silversmith (who also loves polymer clay!).
Hello Ms Turtle...
I want to say Thank you for this great tip! Just made one for my Teddy Bears!
Thank you, I was just thinking about how to make this tool. and out of nowhere turn my PC on to watch some videos and here you were!! GREAT. I'll get to it now. Thank you again.
😲~ I’ve never even heard more less seen one ~ stopped video, got stuff and made them~ soooooo much easier now ~ FANTASTIC 💡 IDEA U HAD 👏🏾👏🏾👏🏾👏🏾👍🏽~ ty
This saves so much time , and you can make whatever sizes u want
Susan, this is a brilliant idea! I was actually trying to think of a way of reproducing the marking tool last night after watching your leaf bead tutorial, and then saw a link to this video by coincidence. I've wanted one of these tools for years - now I can make my own. Thank you!
Hi Susan thank you for your great videos I am just about to start using polymer clay and I love your videos
So I am new to clay and you are a dream to watch. Thank you for all of your videos! Oh and nothing is boring to me .. yet
Welcome !
Fantastic thanks for sharing. Now my beads will be the same size.
Im just starting with polymer clay and binge watching your videos, very helpful thank you. My hubby said he'd make these from wood.
That is awesome!
I’m a “gadget” person, but I do love the idea of spending my money on more beads and clay!! You may have just converted me!! 💜💕💜
I am also a "gadget" person; but I like my gadgets being hand made. Does leave more moohlah for ths fun goodies.
I think I'm falling in love with you (!haha!) - I just love that you're taking the time here to show us how to make our own tools rather than spending our money to buy expensive tools we might only use a few times.... you rock!
🥳Thank you for risking your new manicure to teach us this money saving Marxit hack! 👍🏼 It’s very much ❤️appreciated, so are ALL of the links you take the time to add!! 😘
I find myself up wayyyyy past my bedtime, looking at many of your beautiful creations. They are superb and sometimes look delicious! lol. Thanks, Susan for giving all of us your time and talent. I appreciate it.
I think all u need to make is the 5mm & 7mm for 10 mm cut every 2- 5mm mark= 10mm etc.. Thanks so much for the do it ur self tool u just saved me 20$
I honestly wish I could have binged your videos about your homemade clay tools before I had purchased mine. I am still trying to get my clay but I’m working on using what I have. I did invest in a Sculpy brand machine and that’s something I am glad I got. Thanks for your videos. Have a fun vacation!
I love watching your videos and your work is absolutely outta this world. I've been so inspired by them, I'm trying it out for myself. Thank you!
My name is martha I thank you for the idea they are a budget saver and thank you so much for the other video the ideas are beautiful please give us more ideas for budget, I also remember you gave us another with silk fabric that were dyed to make a necklace for that you made a tool using a paper roll and rubberband to wrinkle the fabric it was also a great ideas love your ideas.May God Bless you always.😄
Right before you said anything about your nails I was thinking how good they look lol
My hubby was going to make something for me but this is way easier ! He will be thanking you lol!!
You are soooooo smart and kind by sharing all of your secrets!!!!!!!!! Love ya!
Brilliant! Love how you recycle to make tools for clay. Thanks for sharing!
Enjoy your vacation 😊
I actually have one of the marks it ruler. But I like the way yours works.
Tha;nks for this tip Susan! I'm making one today.
Make little cuts in the edges of chipboard. Then wrap a small dense string around the board. Secure with glue and tape. Be sure to mark the working side vs slanted side.
Thanks so much for your inspiration -- you make us feel like we can create beautiful creations!
Thank you for so much info.... I am new to clay.. but hooked very quickly... You are so easy to follow and I LOVE LOVE LOVE the alternate things you make to use... I am retired and your instructions have helped me get going.
GENIUS!!!!!!
Thank you very much for showing this great idea. I'm just getting started in polymer clay and this really helps.
I made these with toothpicks....what a cool hack this is. Albiet...i found it difficult to make a 7mm only for counting the lines on my ruler...but I was very successful with a 6mm size and it looks and works great😁
Susan, you are the Best! I'm living at Germany and I look since one year for this Tool. No way to get this! Thank you for the great idea!
Absolutely ingenious! Thank you 🙏🏻😊
Thank you!
What a good idea! Thanks so much. I have a Marxit tool (I believe I bought it from Donna years ago, here in the UK) but I'm not a big fan and hardly use it. In fact it has been damaged by the clay as it's hard plastic. Your version looks more user-friendly!
I know I just found you tonight, but I Love how Resourceful you are. 🙂
Definitely gonna make these. Just need to hit my recycle bin lol. I Love homemade Tools. I have 1 for beading/ jewelry making. I have a couple other homemade tools for crafting. The 1 thing I Love about homemade tools is the $ I save. That Helps me big time since I'm on a very limited income. I'm so Glad you're taking the time to show us how to make them.
Now I'm gonna go look for 1 of your videos making a Cane. Cuz I have no idea what that is. LOL
Take Care Susan .. Hugz, Jill🤗🙂 tfs
Welcome Jill! Polymer clay is expensive so I try to spend most of my money on that and not unnecessary supplies I also have a video for a needle tool which is one of my favorite tools and a starting to make beads video, if your buying tools blades and acrylic blocks are so much cheaper through ali express, wish or ebay . Happy claying !
Great idea! So many items around the house you can use for clay and make for clay. This is a great idea. Thanks.
Will make one with intervals not on the mark-it! Good idea.
Yay!! Thank you for the ideal! Donna Kato no longer make this tool so I very happy for the tutorial.
You are awesome!
Gosh thanks so much!! This is awesome! I'm going to make some. I'd been wondering about that marks-it tool you'd been using. I figured I just needed to run into the right video. I was right! 😁 It kills me to see you got your wire clippers for a buck or two as I got mine when I started beading and it was more like $10 but I've gotten my money's worth. By the way, if you ever use memory wire, there is a special cutter as that wire is much much thicker than other wire. Memory wire will destroy the blades on those blue cutters you have. Thanks again!!
The tool isavaiable at Donna Kato's website called Prarie Craft. I just got one from there. I think your alternative, Susan is great.
I had one from her when she first sold them,I just confirm my new one coming from her site to,ty for sharing cause I been trying to find another one
Yes, I found one there too. I'm waiting for it to be delivered. :)
$14.99 in June 2019
Thanks so much. I used sewing straight pins. I just made the cardboard wider since the pins were steel and couldn't be cut.
Oh ill bet that worked great though
You are an amazing Crafter I make my own paracord fids which is like needles too
Love this channel
Greet ideal
Love your idea
A sewing expanding equidistant tool is a variable device like a Marxit. Amazon has them. Be great for spacing buttons except they only expand to about 8”.
Awesome, great idea. I have seen the bead rollers previously, free sounds much better for me. You have given me so many tips and techniques that I do not know where to start. :)
Thanks I will do it.
That's awesome! Thanks!
so clever! tfs
Fire Mountain Gems has a ruler set that has a hexegon ruler in the set. Very reasonable. I search high and low over the internet and finally found one.
Lol just had a thought that made me laugh. I wonder how many times you say "cuz watching me ..... is boring" ?
You are funny but i luv ya.
I am boring , ask my kids !lol
@@TurtleSoupBeads you are not boring. You are funny, creative, thoughtful. I like you just the way you are. Feels like I've known you for long time, but we never met and I've only been with you're channel for few months.
@@craftincrazykarri1880 thanks your so sweet !
fire mountain gems also has a it. ruler and roller set
Love the process!
This was wonderful, thank you for sharing and putting out such great quality content ✌️😻
It occurs to me that if you have only four sides to the homemade marks-it-tool, then you could pick up a cubed off block of wood at Lowes or HD if you look for it in the lumber section. And following the same instructions make one tool with all four sides.
It's spelled 'Marxit' on Prairie Craft. I think that is why I couldn't find it. I was searching for 'Marks-it'. That being said, I like this hack since it's nice and flat! Thank you Susan!
I was afraid of copyright infringement
I found one for 2.78! Fire Mountain Gems has sets for marking. Also, I found the brand name (I believe) and it is Marxit.
Thank you so much
Brillz!
Thanks for sharing this, Im in the UK and have been unable to get one of these tools, you have some great ideas.
ClayAround sell it on their website.
A Toblerone box filled with plaster would work great for this!
brilliant idea ! rtfs
Today we made the Marxit tool, well sort of. We used a ruler instead of cardboard. I have sheets of PVC and 20g pipes I could use and I still might. I showed hubby this video and an Etsy account picture as well as Fire Mountain Gems website images and decided on using cheap dollar store rulers. We used dollar store Super Glue to place the wire. I wanted thinner wire so we used 22 gauge and I intend to make a sample of each size because, I am very visual, for quick reference for each ruler. I thought of gluing them to make the hexagon but nah, why make more work? I haven't done it yet but I will be putting a keyring through the ruler holes to keep them together. I have a problem with losing stuff easily because I am a bird brain, so this is my answer. They will hang on the side of a parts drawer set, right at the back of my table. Yeah!
Firemountain gems has it. I just bought one.
Fire Mountain Gems has a knock-off of the Mark It tool. It's called the Roller and Ruler Tool. I love your idea, however. Those of us still attached to inches can customize it!
Kimberly Quiltraveler thats good to know because so many people tell me they cant find any tool like the mark it. But whats nice about making uour own you can make and size space you want .
What a wonderful idea! I like finding ways to recycle materials to make the custom tools I want. Love your videos and the easy way you work with polymer clay. By the way, the Marx it tool is still available at Prairie Craft dot com. as of September 7, 2018.
Hi Susan, I just watched this video as I am trying to set up my studio with limited funds. This is a great tool and a wonderful invention! Thank you!
I have a couple suggestions and requests.
1. I can’t cut thin slices of cane evenly. The cane cutters are so expensive. I looked at a couple videos for homemade cutters but they fell short of my expectations. The miter box one has promise but there’s no way to make sure each slice is identical to the next one. I love the cheese cutter idea and was thinking maybe a mandolin? Any thoughts?
2. I also see people mounting the baked pieces on a tube or straw to resin them. How do they do that?
3. Many clay artists will say “bake at recommended temp for X time.” But X time I’d always different. Is there a formula?
4. Lastly, you said on one video for beads that you bake on a t shirt. Other people use paper. All of these items are flammable. How are they not catching fire? Is there a nonflammable option? I do animal rescue so there are a lot of critters around. A fire would be devastating so I need to be as cautious as possible.
Thank you! Can’t wait for more videos!
love this idea!
Even better you can make your tool any size you like for pennies!
AliExpress has this marking tool. It runs about $18.00.
saw them in hoby loby last month 4/19
I just bought a tool mark tool, comes with metal ruler, for $2.78 ($6 shipping) at fire mountain gems. Just a fyi. I’m in US.🤪
yes this video is for overseas where the tool is unavailable
@@TurtleSoupBeads Dang :/ well I still haven’t used it - if that helps, not getting one. 😬
These tools are currently available at Fire Mountain Gems.
I’m wondering if instead of wire you could just draw a line with a small tip glue gun….or would the clay stick to that?
How about the 3D community. Bet they have a file for your marker. Just my 2 coppers
instead of using a ruler and pen to make the lines, just stamp the tool in a ink pad and press on cardboard. Of course this doesn't help if you don't have the tool!! LOL.
i'm trying to find where you use a mopping liquid...... to coat your clay beads.. i can't find that video...
Great hack. I have the tool but I don’t think I’ve ever used it. I forget I have it. Anyone want to buy it from me let me know.
On what polymer craft do you use it?
Making beads
I made my own following this video and it works wonderfully but for those who feels they have to have the Donna Kato's version it's available here : prairiecraft.com/kato/KT-MX.html
Fire Mountain Gems $2.78
Ruler and roller set is what they are calling it on their website
its available for UK and EU buyers from here, it's where I got mine from. www.clayaround.com/ourshop/prod_3548987-Marxit.html. Susans alternative is brilliant though, and I'm going to set up some strips of my own. Thank you Susan :)
What is the name of that tool?
I will never look at trash the same.
prairiecraft.com/kato/KT-MX.html I just bought one at the Prairie Craft store in the US today. The reason they mite be having a hard time finding it is the spelling. Marxit by kato poly clay. They say they have a 175. Hope this helps. Love the videos. Thanks.
The problem is i have many overseas subscribers and the shipping alone can be almost $20 and they needed a alternative that was affordable .
Firemountaingems.com sells em pretty cheap. Search on rulers grey, or product number H20-3520TL It comes in a plastic case with a metal ruler.
IMO making a marker with polymer clay would be easier...
I love this. I have been searching for that tool and I finally found it on prairiecraft.com for $9.99 plus $5 shipping so I ordered it. Then I open up youtube and here's your video on how to hack it. Like, directly after ordering. Oh, well! Thanks for trying to save me $15 bucks. LOVE your tutorials. I have watched and tried most, my husband calls you the clay lady!
Thank you!