How To Easily Install Metal FENCE POSTS - Step-By-Step Guide
Вставка
- Опубліковано 14 тра 2024
- Do you need help setting fence posts? Look no further! In this video, we will break down the process of setting fence posts into easy-to-follow steps.
From digging the holes to securing the posts, we'll provide all the tips and tricks to make sure your fence posts are strong and secure. Watch our video to learn how to set fence posts easily and quickly!
⚒️ Tools used in video:
Titan PGD 3200 Post Driver: amzn.to/3VQBTDV
Tape Measure: amzn.to/3RcpERy
Stakes: amzn.to/3RaIWXk
String Line: sevenpeaksproducts.com/produc...
Marking Paint: amzn.to/407fbuE
Sledge Hammer: amzn.to/3Dd0yvZ
Level: amzn.to/3kAoJhi
Leather Gloves: amzn.to/3WGEalp
Safety Glasses: amzn.to/406Lp9q
Post Hole Digger: amzn.to/3WArblr
Shovel: amzn.to/3wvbamf
Sika Post Hole Foam: amzn.to/3R64ODe
Quickrete Fast Setting Concrete: amzn.to/3HdbjPR
🔔 Subscribe for more of my content! / @sevenpeaksfenceandbarn
🎬 Watch this video on how to install continuous fence: • Watch This Before Inst...
► Click Here For Fencing Hardware: sevenpeaksproducts.com/
🗣️ Be Sure To Check Out Our Social Media:
Facebook - / sevenpeaksfenceandbarn
Instagram - sevenpeaksf...
TikTok - www.tiktok.com/@sevenpeaksfen...
UA-cam - / @sevenpeaksfenceandbarn
For more information on horse and livestock fencing products and pricing visit our website at:
👉 www.sevenpeaksfenceandbarn.co...
Visit us at our locations or give us a call:⬇️
Texas Location:
📍 9601 County Road 1004 Godley, TX 76044
📱: 817-398-5029
Arizona Location:
📍 1037 South Center Street Mesa, AZ 85210
📱: 480-246-6237
0:00 Intro
1:59 1st Steps
3:05 Measuring Distance Between Posts
5:25 Prep for Setting Posts
7:18 Depth of Holes for setting posts
8:00 Digging Post Holes
9:36 1st Post "Corner"
10:02 Setting Posts using Concrete
12:32 Setting Posts Using Foam
15:49 Checking in on the foam post
16:07 Driving Posts
17:37 Final Review (The Best Way To Set Posts)
#fencepost #settingposts #fence #fenceinstallation - Навчання та стиль
Thanks so much for the comparison, and I only have one post to do. I have never set a post before, and I will be doing this on my own. This video will help a lot.
I’ve never seen a comparison like this before. Excellent stuff! Thanks ⭐️ ⭐️ ⭐️ ⭐️ ⭐️
No problem 👍 Thanks for watching! Check out our other videos for more great content!
In some dry, rocky soil here in central Texas, I found the dirt would crumble and fall out of the post-hole digger, and pulling it out by hand was tedious. Instead, I'd break up a few inches of soil with the post-hole digger, and then pull the loose stuff out with my Shop-Vac. I'd need to pause periodically to pull a rock out of the nozzle, but it worked pretty well, though that'd be a little more difficult farther from an electrical source.
Great stuff, thank you,
Awesome, thank you!
Thanks so much... just what I needed
So glad to hear! It’s why we make these videos! Thanks for watching
marvelous & merci
Awesome video!
Glad you enjoyed it
Thank you
Concrete seems to be the best option here. Post driving is dependent on soil type. Awesome video overall.
Thanks for sharing this video
You bet! Thanks for watching!
Thank you!
You're welcome!
Nice
Thank you so much for the support!
Great video, I’ve been trying to figure out what to do for my fields. Another struggle is which posts to use since I’m in Oregon on a hillside (lots of moisture) are those galvanized posts and best ways to attach fencing to galvanized posts would be great? :)
Thats tough. I always suggest concreting for best results but being on a hillside with lots of rock can be challenging too. These posts are just raw steel but you can definitely get galvanized posts. And attaching fence to galvanized posts would be just the same as raw steel posts whether thats continuous fence using clips and screws, top rail no climb by welding top rail to posts and tying on the no climb or welding a top rail with rails in between. What type of fence are you looking to do?
Nice demonstration of the different techniques! Would you ever consider digging and concreting a steel post to later be used with a vinyl fence? There's a product called a "donut" that slides over the steel post and then screws into it, and then you slide the vinyl post over that donut and put a screw through the vinyl into the donut. You may have heard about this method before.
The benefit, as I see it, would be to have a smaller diameter hole(steel post as opposed to the 5x5 vinyl) and I guess an easier time repairing if a vinyl post ever cracked or something. I'm building my own vinyl fence in the coming weeks and would appreciate any thoughts. Thanks!
How'd it go?
@BeeRye Still waiting on the surveyor, but I'm leaning toward just putting the vinyl posts in concrete. I think if done properly there should be no need for repairs and should last a long time. Rough estimate also save $1k by not using the steel.
Perfecto
Thank you so much for watching!
Do you need to brace the post to keep it plumb? How do you do that?
Good question
Concrete❤
Great option! Thanks for commenting! Be sure to watch some of our other videos for more great content pertaining to horse and livestock fencing!
Fast 2K fence setting material is far better than Sika.
Just a FYI
GOOD TO KNOW! We will have to try that! Thanks for the info!
that is expensive
Plumb post!
Not level when measuring vertically young fella!
You're 100% right! Thanks for commenting!
Americans use protection goggles and gloves for everything xD
You aren't doing anything that pose a risk to your eyes, and you don't need protection gloves... at least not during the measuring part.