BENDING WOOD with STEAM to create an LED PENDANT LIGHT
Вставка
- Опубліковано 4 сер 2024
- This episode shows how to make a DIY wooden LED chandelier or pendant lamp using Rockler’s steam bending kit. This LED chandelier / hanging pendant light is part of the Rockler Bent Wood Challenge It took many attempts to steam bend the wood for the LED pendant - I tried maple and oak, but in the end the LED chandelier turned out pretty cool. I’m just using LED strips with an acrylic diffuser to diffuse the light from the LEDs. This LED chandelier or pendant light is a challenging but rewarding DIY woodworking project, which anyone can make with a bit of can-do-it-ness.
\\ ROCKLER PRODUCTS //
Steam Bending Kit: bit.ly/2MbSd0g
T-Track Clamps: bit.ly/2oOjcH5
T-Track: bit.ly/2Ilk2Ca
Bench Cookies: bit.ly/2LJzkCL
\\ FOLLOW ME on INSTAGRAM //
goo.gl/F4UdEs (@modustrialmaker)
CREATE - Steam Bent Bench: • Steam curved bench
\\ MODUSTRIAL MAKER GEAR - MUCH LOVE FOR YOUR SUPPORT! //
bit.ly/2RGgVXB
\\ PARTS and OTHER TOOLS //
o Suspension Wire Kit: amzn.to/2VEApPx
o Skateboard Wheel (for bending jig): amzn.to/2VB0XkF
o Plastic Bag / Tube Roll (for steaming): amzn.to/319XISD
o Meat Thermometer: amzn.to/317xSi5
o 120 LED/m LED Strips: amzn.to/2SoLFx5
o 12V LED power supply: amzn.to/32ak1sH
o Cordless drill and driver: amzn.to/2IaVrRi
o My favorite solder: amzn.to/2CNgjIF
o Quality Soldering Iron Kit: amzn.to/2CKHoMC
o Soldering Mat: amzn.to/2DboPCd
#rocklerbentwoodchallenge
#woodworking
#steambending
#diy
#chandelier
#ledstrip
#LED
#pendantlight
#lamp - Навчання та стиль
Next time just go to Home depot and get some 2x4. They already come bented for you.
🤣🤣🤣
It’s not a bug, it’s a feature!
No joke! I watched a pallet of 2x4s grow about 8" vertically when they unbanded it at the local Menards!
🤣🤣
I really hate that there's a reason for all that unevenness in their final product at the local big box. Anyone know if independent lumber dealers have a better final product or is this the way it is with white and yellow pine (along with whatever they provide out west which I've heard is a different breed of soft wood)?
That bathtub is nicer than my whole house, and you're using it to soak wood in
I thought there was a bit of irony in the bathtub 😁
a bit of cast irony from the looks of it.
lol
It's nice that you were able to save the oak pieces. These turned out look great and thanks for sharing all the tips!
Thanks brother!
Nice work, man! We built an almost identical steam box and used a clothing steamer. Worked well for small pieces but the output was too small for anything larger than a couple feet. Solid design as always.
Thanks! That is a cool hack for smaller bent wood projects... And good to know for bigger ones like this that the Rockler kit is worth it 😃
WOW, another home run, fantastic project, thank you for leaving in all your learning curves, pardon the pun, looked like a lot of work this one but I must say it looks amazing.
I'm not an electrician but I have had 4 strips 150cm long of 5050 LED's (60 per metre) side by side double taped to a length of wood, no heat dissipation at all, they've been running 24/7 for over 3 years without any problems, heat marks, nothing,
Anyway thank you so much as always for sharing your work,
Take it easy from accross the pond 🇬🇧 🇺🇸
Thanks brother! I've never had any problems either... I just get a bit more nervous when doing a permanent install.
@@modustrial
I know what you mean, luckily the ones I mentioned are above my lounge TV and they and their power are easily accessible,
Just using aluminium won't really take away the heat since the aluminium is in the same blocked up space as the leds are. That is, if you're planning on leaving the light on for more than 15 minutes at a time so that the aluminium will reach the same temp as everything else. Once it's up to heat, it'll essentially be the same as not having it. Basically no matter what you put inside a box won't matter how the outside of the box conducts away the heat. Can't escape physics.
So like some others suggested, before you do any problem solving, find out if you even have a problem if the first place. See how hot the thing will get. Compare it to other lamps you have. If you've created a stylish, high-end led-breaking-toaster-oven (you're not going to be setting up a fire, the leds will just break because of the heat), open up the backside of the lamp (drilling holes or preferably route a channel) so the heat can get out. No need to worry about airflow since the acrylic will not be an airtight seal and even if it were, a groove would still allow airflow (efficacy can be debated but it's still a very significant amount unless we're talking widely spaced pinholes) and even if it didn't, enough heat can radiate out to cool any normal lamp. You'll probably want to prevent light from leaking out the back so here some aluminium will let the heat conduct more easily, but obviously just having a lot less wood in the way will help out as well.
I seriously doubt you'd need active cooling (a fan) unless you're looking for film industry level light power. It's a lamp for a home. Even large open buildings don't need that despite having much more power-hungry lighting. And there are leds we're talking about, most of the energy comes out as light as opposed to classic light bulbs where over 95% of the energy used just comes out as heat.
Now if all this is a bit of a long-winded ramble, allow me to summarize: It's a lamp for a normal house. It's a led-lamp (efficient). Many led-lamps are completely closed of with light diffusers. Regular solutions are enough for regular applications.
I like the summary 😃 and all the other info is helpful too 😉
Hey Mike, has become a great video again, I like the design of the lamp very well! Best regards Frank
Thanks much Frank!
Man, you really went through a bunch of different things to make it work. I totally understand the frustration. Way to stick with it! The light turned out cool in the end!
Thanks for the kind words Bruce!
Dude.... they look awesome! thanks for sharing...
Awesome video! Lots of great information! Thanks Mike
Thanks brother!
always happy when you upload grate project mate
Thanks much!
I’ve been wanting to try steam bending, thanks for doing this!!
I say go for it! 😀
Really nice results! And good reflex on that kickback 🤭
Thanks Devin!
As Bill Burr said: "Losing your shit is part of the process" 8-)
🤣🤣 I concur!
I had a drawer - a simple rectangular drawer - decide to engage in a fight to the death with me this afternoon. The dry fit was fine but the moment I applied glue it wasn't having any of it.
It ended up halfway across the yard and its replacement went together swimmingly.
That's an awesome idea and you gave me tons of ideas for a new project.
Btw, for those who are about to replicate your bending jig I suggest looking for longboard wheels, they are usually larger, flat and more durable than skateboard wheels, who tend to be smaller.
Thanks Henry! And good tip...I think the ones I used were longboard wheels, but I didn't make that connection until you pointed it out 👍👍
Steambending is about compression, not about stretching. Your cracks seem to be a result of stretching.
Inspiring!!!🌼🌿🌺🌱🌸🍃💫👏🏻👏🏻👏🏻👏🏻🤗
*THANK YOU!!!*
Thanks much! 😁
You could use hanging steel cables as wires, one cable is + and second is - .
Just in case is possible to cover steel cables with some clear
.... with some clear rubber or silicone tube
Inspiring work. Thanks for putting so much time into this.
Really cool Mike! 😃👍🏻👊🏻
Thanks Fred! 👊
You are making me want to build a chandelier!
Go for it! Would love to see you put your spin on it!
Cool use of the steam bending.
Thanks Mike!
💖💖💖💖💖 GORGEOUS 👍🏻👍🏻
Such a cool design, Mike! So many learnings in this one, including the benefits of powering the LEDs from the middle...makes so much sense! Also nice to know I'm not the only one that loses their sh!t in the shop sometimes haha.
Thanks Ethan! (And sorry for the slow response, was having a bit too much fun at makesgiving 😁)
@@modustrial No problem haha - you're still the best/most consistent responder out there! It looked like it - so many great minds and creators all in one place...so awesome!
Steam bending opens up a lot of opportunities. I might try to combine it with woodturning 😎
That combo would be really cool 👍👍
Nice work, Mike! I've never seen you get so steamed over a cracked piece of wood.
Thanks! So "steamed"... Good one! 🤣🤣😁
Love seeing the mess ups
I always try to include the mistakes so that others can learn from them 😀
Just found your channel and really enjoyed watching you going through the bending process in an honest way … stuff happens! I was wondering if there is a transformer somewhere that would have to be in the ceiling somewhere?
Great Job!!
Thank you!
I like it!!!! And the chandelier also!!!!!
Thanks!
As a recurve bow builder, I felt all of those steam bending pains in my bones.
It was definitely a learning process!
very creative design!
Amazing 😍
Thank you!
Great stuff...I've always wanted to try bending wood....just might have to give it a go...
Thanks Tom! It definitely takes practice, but is a lot of fun.
Real nice design Bro. Greetings from Poland.
So cool!
Thanks Jamie!
Depending on how many watts each LED uses, the spacing of the LEDs, and how bright you run them, they shouldn't get too hot to worry too much, but the aluminium tape is a good idea to dissipate the heat into the wood. Making sure it is stuck well should help, which you did. Nice project mate, I'd like to do something similar, cheers!
Thanks much! 🍻
To dissipate a heat into the wood? bad idea... One side of wood can burn at 1000degC, the second side you can still touch with your hand!
Aluminium tape? Also bad idea. It just creates here an additional heat resistance.
Wood from one side and no air flow at all because of scatterer - this is really bad idea... I like wood style, but really - it does not fit for LED projects as it shown here. as a night or evening "warm" lamp, down-powered, - probably fine. But once you take it for correct room illumination with 20-40-100Watts - forget it - you need cooling.
Especially for the LED stripe, which is so dense filled with LEDs...
Good idea would be to check the temperature. if it goes above 60 degC, and I bet that with 12V in this case it will - scatterer should be redone and backside should be drilled to let air flow. Or one could mount LED stripe on appropriate alu stripe (1mm thick or similar) and have at least part of it, if not all, be open to the air. From the backside of course to not ruin a design.
I would even add a hidden 12V blowing fan, downvoltaged to 9-10V from the side, purging the air along the stripe.
In case I would do it for myself, not for someone who wants to have a nice design and don't care how long it lasts.
Thanks for the advice.... It's very easy to drill holes in the back for passive cooling... No one will ever see them. I'll probably do that and then test to see how hot it gets
@@modustrial hi. Just holes on upper side will not help a lot. You need to create an air flow. Holes above should serve as warm air outlets and other small openings from sides or below will be cold air inlets. The air flow will be created itself because of temperature difference.
But I would say it is tricky to make it in a current design...
First try to measure temperature. I would be glad to know I'm wrong and it is kept below 60degC after 10-20 minutes.
Although, I have several LED DIY lamps ( far not so nice as yours) and have experienced quite high warming of LEDs . Especially in closed volumes.
I like It! Can I suggest you to use, if you can, the same cord used to hang up the chandelier for a cleaner design? You can use one cord for positive and the other for negative.
OBVIOUSLY WITH ONLY VERY LOW VOLTAGE LEDS STRIP.
I looked into this, but there really are no good solutions out there... The only ones I found were very high end.... The type of companies that tell you to "email for a quote".
You can just use those compressible wire attachments (with a plastic sleeve) to attach wires to the hanging cables. Two wires inside of the lights to solder to the strip and two more inside of the hanging top plate to attach to a transformer.
Very similar idea to the track lights used in stores and offices.
Please use the cables that you hang the lamp from for power, therby eliminating the need to have that white cable go down :D
Is that safe?
@@iZebraHD Not for AC, but DC should be OK and you can get wire thats coated
looking forward to confirmation from electrician. I had my uncle (who is a one) check out my diy light, he said that I needed to swap out wires and organize them better. I wasn't working with LEDs but regular socket bulbs. Im updating my build with a 18-3 braided wire pack inside the fixture to connect everything rather than have the 3 wires running seperatly. Idk the code on ground wire for fixtures , I know alot of desklamps dont have em. I wonder how the LEDs will be, as I noticed you dont have a ground wire.
Yea LED strip themselves don't need a ground wire, but there will be a ground wire running to the ac/dc power supply for them.
Cool toys, I wish that all stuffs in my workshop one day later so I can make something better to show in my channel..😁
Thank you!
Beautiful job, dude! 😃
A tip: next time try RGB LEDs with a controller! You can wire everything like that (but with 3 or 4 wires I think) and use only one receiver for the remote controller. 😃
Thanks! I did something similar with individual addressable LEDs. I couldn't find white shielded 3-pin wires so I opted for the basic LEDs in this one, but it would definitely be cool with RGB 👍👍
Hi , I'm Hector from Argentina , love your work and explanation , I can't find here that stemear. Didn't find it in Amazon too. If you put into water 10 hrs the piece of wood can you bend it ??
Any special wood to use??
Thank you
Hi, just soaking in water isn't enough, it's actual the heat that makes the wood bendy. I think Rockler sells in South america. You can order directly from their website.
Awesome!
Thanks much!
Огонь!!
Beautyfull work ♥️♥️👍👍
Thanks Ben!
Learn must who do it thanks
Awesome project! The end result looks great and the process was super informative. Could you include a link to the hardware you used to hang the lights? Those quick release things would come in handy.
Thanks Andy! I'll update with links soon, or if you check my older Rings of Saturn pendant light video, there is a link to the same ones I used in that video description.
Oh, awesome. I will just look back to that video. Thank you so much!! And thank you for constantly innovating and showing us awesome projects. Love it!!
Would look great over a pool table!
Thoughts on a white Cement farm sink? Is there a cement strong enough to withstand everyday sink use?
This would look great. GFRC is used all the time for sinks, so it's a great choice.
Hi Mike you conjured a very big smile on my face. I almost could't believe it thank you🙏💪
great video and great design, as always👏
Thanks brother! Not quite the same level as your bench, but I'm learning slowly....
@@modustrialno way!!! ash wood is much easier to bend as the most woods.... I really like how you show your mistakes .. thanks Brother 💪
When I have to make sharp bends, I don't use steam bending. Rather for me it works better (faster) to use a router and layering many smaller pieces
Sleek and beautiful
Thanks Nicole!
How about using many skateboard wheels bolted in pattern so that your bend would be standardized?
That might work....good thought!
I just got a table saw. I'd say kickback is my biggest concern. is there a way to completely avoid it?
No
But after 30 something years of using a table saw I have only 1 kickback
Just take your time & don’t rush
Always cut thin stock so it can clear the blade on it’s own & not get jammed between the blade & the fence
3:53 happened to me as well.. I was holding a piece of wood by hand and it just flew away. Very scary experience
great project as always. do the led strip give good lights? it seems pretty dim at the end of the video. maybe its just the ambient light that is very high.. if not there is some double row led strips that could maybe help. without thermal heatsink I never saw very powerfull led strip. the one We use at work for datacenter are so powerfull they gave us 3x the lux compare to old 8ft neon. But they are in aluminum casing ..
made by philips I think
The LEDs I used for this are 120 LEDs/m and very bright....I'll update the video shortly with a link to them (or check the lights I used in my concrete epoxy LED desk lamp, there is a link to the same ones in that description).
I first saw the poly bag steam bending technique on the Tips form a Shipwright channel. I've abandoned my steam box as a result. You can do far more than bending a board -- I've used the technique to *flatten* boards and to form spirals around a PVC pipe slid over a metal rod.
Wood fails upon bending because the inner surface is in compression and the outer surface is in tension. If you use metal strapping on the outer surface and pull on the strapping, the entire piece of wood is then in compression. Lee Valley/Veritas makes some really nice stainless steel straps, but with a poly bag protecting the surface, you can roll your own. Clyde
Thanks for the tips! I saw the technique with bags on shipwright as well.... Good stuff!
did you just use primer and the cpvc glue on pvc?
Great form factor! Can one swing from it, though? Asking for a friend.
Thanks! No swinging from those suspension kits, lol... They are rated for 11 lbs per pair 🤣
fyi when using pvc primer it is meant to be applied and glued while still wet. I have done the same thing you did about 9000x times before a plumber said "it says not to do that on the can" which it does. So no more priming up 30 pieces at a time and the job got messier but if you want maximum chemical bond, wet primer, wet glue and slam it together, rotate. Thanks for all your videos and its good stuff!
Strait grain is the one side and a metal or plastic band shall help to prevent cracking.
As a pro-tip/upgrade tip. File/Grind/Remove All But the Last 2 or 3 threads on the Pipe Cap So you Dont have to turn it 10 times to open and close the PVC steam chamber
Great tip! I'll definitely do that before it's next use 👍👍
Hi. Did you use glue to stick the acrylic sheet?
This might be a weird idea but how about instead of steam-bending those pieces, just cut them out of a thick, wood plate? No messy bending work needed, because you just wanna make pieces that have a very small width. You could just draw the arc of the bent pieces(from side view) on a wood piece and cut them out. If the thickness of that wood plate is the same as the width of your piece, ta-da you have your piece in minutes!
Only difference is that the pattern of the wood could tell if its bent or cut-out. Other than that i think for this project you didnt need necessarily have to bend it. Quite fine work thought, good job as always Mike!
That rage though - shows you're still human outside of youtube. Lol
Ha, thanks brother!
Is it possible to do this with soft wood like pine, if I'm not interested in using expensive hardwood
It's actually much more difficult to bend softwoods
love the idea not great with wood work but great with electronics and electrical .. seeing as its lv (low voltage) 12v i would have used the steel cable suspending the lights as my wires to power it one side positive the other negative that way there is no other cable on show just a personal touch i would make
Awesome chandelier. How long have you been doing woodworking?
Thanks! I've been into making all kinds of things for about 3 years now.
@@modustrial that sounds good as your work is really spectacular. I hope you keep coming up with and sharing these cool ideas.
💫
I'm just getting started, with my first project being a patio at home.. wish me luck 🤞🏻
Wow. That's a wallpaper stripper steam doohickey. They retail for around £20 here, including hoses etc. How can a Rockler sticker be worth an additional £60. Crazy.
Anyhoo, really love your channel and content.
10:35 I would class Hiding Mistakes as the 2nd most important Woodworking Skill...
The MOST important Skill in Woodworking (or working with any material for that matter) is being able to use Power Tools without hurting/killing yourself (or anyone else)...
It would be interesting if you made another of these chandeliers replacing the wood with Epoxy Resin (perhaps embedding an Aluminum strip in the mold to attach the LED's to as a Heat Sink)?
Exactly as you did with this Project but replace all the wood with Opaque Resin, leaving the Translucent White "Window" for the LED's...
Dude I stopped getting your notifications for uploads! Very upsetting 😡 lol, but this is pretty neat, you don't see much of this style lately. I've been trying to figure out how to get some more light into my room myself. Won't be doing a ceiling fixture of anything but I will be doing a nice wall piece! With Hue's LEDs.
That's so weird! You'll have to send me some pics of your fixture when it's done 👍👍
What is the difuser you use please :-)
It's not the LEDs voltage drop, which makes the LEDs dimmer, the further you get from the power input, because they are parallel. It's the resistance of these superthin copper traces, carrying all that power. Heat dissipation is a good thought. BUT: As you are hanging each strip from two steel wires, why not use them to supply power? Yes these add some resistance, but you can measure the voltage arriving at the strips and turn up the PSU accordingly. You could also use copper wire to hang them. I think this would create an even cleaner look. Nice project though.
Thanks! I definitely thought about it, but would prefer to find a ready made hanging kit that would be up to UL code, since this will be installed in my home (which I will likely sell soon). But yes, using hanging wires for power is a great idea and ill likely try it at some point in the future.
I didn’t see the drivers, did u install ac strip lights ?
So Rockler are trying to sell wallpaper steamers to woodworkers. I suppose they add 5000% to make it feel special. I love your videos. But shame on you rockler
I didn't even know wallpaper steamers existed (learn something new daily!) but if it can be used for the job, isn't it smart to show other uses for the product that some might not have thought of? The PVC pipe encasement didn't work but the steamer worked w/ the plastic bags. Although it did seem a good long soak worked best and that's usually what I see ppl do instead.
Just to clarify, the PVC pipe will actually work well if you aren't pushing the limits of steam bending like I was. With green wood and/or thinner pieces, the PVC works well. The bag is probably the easiest method tho, altho it does make it difficult if you want to bend multiple pieces in the exact same way (which I didn't need to for this project). The main takeaway, I think, is that there are a number of ways to steam bend wood, and it's important to pick the technique most suitable for the particular project 😀
@@modustrial The PVC may have worked better if you had set it up on the bench directly beside the bending form, minimizing the time between between being removed from the steam and bent in the form...
It’s funny to me people get made at company’s for selling things for working another way. That’s just good business that gives people jobs. I’m tired of seeing all these dumbass people get mad at company’s for stupied reasons.
@@buddtwin2 it's probably more do with that the steamer retails for £20 here and not £80. Just usual ripping off customers with cheap Chinese tat at exaggerated prices. No offence intended
Hey, man, it looks great!
But I have a question: where did U hide a LED driver?
It is up in the mounting plate
@@modustrial thx, that's how I thought.
Very cool! I think, no matter our age, we all throw a tantrum at some point. They just become less frequent and more 'localized' as we age. I throw an internal (sometimes external) fit when my bed sheets pretend to be a boa constrictor and wrap themselves around my legs, preventing me from moving. lol I have very few issues but that's one that'll instantly cause me to turn 5. haha
Ha! We all have our things! I think a lot of ppl cut those parts out of their videos 🤣 but I figure we all do it, why not share....
@@modustrial Touchè!
Bend the steepest curve first!
Having the humility to admit you edited out your immature temper tantrum has earned you my respect lol
With the amount of effort you put in, you could have sliced that wood and had it curved sooner using bend lamination techniques. Good video seeing your issues and successes though. Well done.
Top
:)
good for all
hi sir, do you plug the cable in the middle of the light?
is that right? I dont know electrical,but usually i see it plug in the corner section
looks like some frustrating moments. Cool project though. I watch some boat building videos where they make bent frames. they sometimes slit the frame at half the width and most of length to assist in steam bending.
Thanks! Yea, I watched some of those boat building vids....that's where I got the idea for the bag.
low voltage, low wattage no problem, ditch the hot glue, and its not voltage that makes the led brighter or dimmer (well more on that in a moment) its the current.
Where voltage matters is on those el-cheap-o strips the thing controlling the current is more often than not, a resistor, so math tells you that voltage divided by resistance = current. From the LED standpoint it don't give a crap as long as there's enough voltage to get past the diode junction, you could run 20 volts though an LED as long as you limit the current, though whatever is limiting that current is going to get screaming hot
Thanks much for the info!
Yes, but he's not wrong in this instance when he said "lower voltage means less bright" because while the resistance remains constant there is a voltage drop so a current drop as well.
Wouldn't it have been easier to make this project out of bent laminate? Why'd you choose this direction? Btw, good job -this is a really cool channel.
Thanks Warden! Yes would have been easier with bent lamination, but would have been a different look
Думаю паровая баня была слишком слабая и мало по времени. Когда формовал пластик то лучше не применять газовую горелку, она выжигает слой пластика и он может потом мутнеть и трескаться, лучше горячим воздухом - строительным феном например. А молодец, очень здорово получилось!
Might I suggest ripping the oak and laminating it to the curves you are trying to achieve. You were pushing the limits of the material. You paid attention to the grain orientation of the material when you're steam bending wood. You want to orient the growth rings parallel to the direction of the bends. You'd probably want to steam the material 2+ hours to have a chance of pulling off those curves though.
I thought of that, but how would you cut the channel then?
You only need to use aluminium channel if you have a led strip that consumes more than 14.4w/m. For 14.4w/m aluminium foil is good enough.
Voltage drop will be distributed over all the leds evenly since they are the same load. All LEDs will be lit the same no matter where you make the connection. The dimming will always be uniform with the same LED or bulbs being used across the circuit. For example if you only have 1 led, that led will drop almost the full line voltage. 2 LEDs each one will drop half line voltage. 3 LEDs will each drop one third line voltage and so on.
Ok, maybe I need some clarification here.... I know with individually addressable RGB LEDs, the voltage drop will lead to LEDs at the end of the strip being dimmer and/or not being colored differently than LEDs at the begining of the strip... I assumed the voltage drop would be the same issue here, since power and ground are wired similarly in both strips. Am I missing something?
@@modustrial it may depend on how the strips themselves are wired but normal voltage drop in a circuit is distributed. I believe if all leds are parallel (which I believe would be how individually addressable leds are wired) you technically have line voltage to each led, but in the overall circuit, they would start to be limited by amperage, but that should still be equal across all since they are the same load to the circuit. What I think may be seen with what you're talking about is slight manufacturing difference between each individual LED that's causing some to dim more at low power than others, but at normal power levels they look uniform. I would need to have a strip in front of me doing what you're describing to know for sure, but I would totally expect each led to have the same voltage voltage drop and the same amperage draw across each. I haven't played with any led strips since the crummy ones when they first came out, so never had addressable ones, but I've always been under the assumption what limits length of the strips is the power supply and circuit sizes inside the strips
Still watching the video, but stopped it at 4:00,
Why did that kickback occur?
(Maybe there is some lesson in it for me).
Cutting thin strips of wood, there is always a greater risk of kickback since its easier for them to get pinched and they are lighter. I generally just stand so that my body isn't in the line of fire when cutting thin strips. Rockler also makes a thin rip jig, or you can use a festherboard to prevent kickback in this situation
@@modustrial Thanks for your reply, luckily i never had kickback before but just like you, i never stay in line so should it ever happen, hopefully no harm is done.
Ricky from the trailer park boys is nice with the woodworking eh
Cool project. Just FYI the LEDs are in parallel not series so it wouldn't matter if you hook them up in the middle or the end the voltage drop will be the same at each LED.
That's incorrect. If you connect at one end, the furthest end will have have a voltage drop due to the resistance in the copper foil. Connecting in the middle will halve that drop.
To bend wood I usually let it sit 1-2 days submerged in water and use a heat gun to bend it. The less rezin the wood has, the easier it is.
Interesting method....I'll have to give it a try next time
Good
Thanks!
Erm Metal Work?
??
Just saying' most of the interesting stuff you make would be better off in metal..
Up your game man get some wielding equipment..
👍🏻
Thanks!!!
I’ve been trying to develop similar lamps!
I’ll be ‘borrowing’ some of your hard earned results! Will gladly treat you to royalties!
Come visit in Granada, Spain!!!
Don't worry about the heat or the aluminum. You aren't dropping enough power for it to matter. Most of the heat will be in the power supply.
Thanks for insight! 👍👍
Я не увидел где трансформатор на ленту? Либо при их 110в он не нужен?
You could have run the positive and negative power supply down each metal hanging cable. Great video tho.
Thanks!