Laminated Cedar Spiral Lamp from Two 2x4's

Поділитися
Вставка
  • Опубліковано 7 січ 2025

КОМЕНТАРІ • 3 тис.

  • @jeremianlastly7668
    @jeremianlastly7668 7 років тому +128

    I'm not hating on your rubber band technique, but perhaps (if there's a next time) it would be easier to clamp one end with a piece of twine clamped with the wood as well, and then you can start from that end and wrap the twine around the wood and tube until you reach the other end. Idk, might be faster, and the twine could then be reused.

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +114

      I've tried similar methods. The physics of tensioning the twine causes a pulling force that travels along the twine linearly. As the twine tension increases so does the friction on the wood. This causes a dissonant pulling force against the desired finished laminated spiral. The nice thing about the rubber bands is that most of the force is pulling straight toward the center of the tube with almost no dissonant friction. It makes it very easy to do the fine adjustments on the final spiral.

    • @lowlandsoutlaw9757
      @lowlandsoutlaw9757 7 років тому +23

      Try looping one rubber band to the next and so on. Used this technique repairing a guitar body. Great for clamping odd shapes. Bands can be reused as well. Top build there my man.

    • @mkhNetnomad
      @mkhNetnomad 7 років тому +3

      How about a butchers knot???? That should hold nice and firmly.

    • @ชีวิตอิสรภาพ-ป1ณ
      @ชีวิตอิสรภาพ-ป1ณ 7 років тому

      Jeremian Lastly ^o^

    • @MrNncon
      @MrNncon 7 років тому +19

      sometimes you pannic and use what you got

  • @dobbers3
    @dobbers3 7 років тому +294

    I learnt more in that video than I have in the last 50 I've seen. Awesome job!

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +3

      Thank you Paul. I'm glad it was enjoyable!

    • @esteiner97
      @esteiner97 7 років тому +9

      The intelligence this man possesses makes my heard hurt. =)

    • @jlgoins64
      @jlgoins64 7 років тому

      how does ones "heard" hurt

    • @RobinDobbie
      @RobinDobbie 7 років тому +4

      If you watch the video with the volume too high.

    • @YouCanMakeThisToo
      @YouCanMakeThisToo 7 років тому +1

      I agree +Paul Dobbrick!

  • @simidhel
    @simidhel 7 років тому +42

    Absolutely brilliant. Since I started watching your channel I've had to keep re-assessing how I would classify your skillset and over time I've realised you're simply the whole package; tinkerer, inventor, designer, engineer, artist and craftsman and more, all wrapped into one. Impressive skills and imagination resulting in a beautiful, inspirational piece.

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +13

      Wow! Thanks! I've always had a tough time deciding what to call myself. I guess just "Interested" in stuff.

    • @coniow
      @coniow 7 років тому +2

      +Make Build Modify: How about "Jack of all Trades" ? While "Masters" may know all about THEIR particular subject, they often know a lot less about others. The Jack-of-all-Trades knows something about most things, and can pull ideas together very effectively with lateral thinking that can only come from experience.
      Love the lamp!

  • @johnh2o1
    @johnh2o1 7 років тому +1

    I can verify this is a great design, the golden spiral has good visual appeal. I made this but shortened it for a table lamp, 32 inches tall, kept the spiral and diameter the same and it looks great. Added a paisley lace shade instead of the plastic and gloss poly with no stain for the wood finish. Soaked the wood before wrapping helps a lot. Used used #12 insulated wire as giant tie wraps instead of rubber bands. I really appreciate you sharing this as my table lamps were a birthday gift for my wife and she really likes them. Thank you soooo much! John

    • @Makebuildmodify
      @Makebuildmodify  7 років тому

      Dude! That's sooo great to hear! Thanks for letting me know, wow!

  • @davestrain1762
    @davestrain1762 7 років тому +116

    Holy Crap Justin! This is incredible, I am sure that I could technically do everything that you did in this video, I used to make handrails for curving staircases with glue laminations... I just don't think I would have come up with this concept and design in a million years! your imagination and problem solving are off the hook Dude!

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +2

      Thanks Dave. I'm pretty sure you've got the experience to do it. Thanks again for the compliments!

  • @WorksbySolo
    @WorksbySolo 7 років тому +25

    Justin, although this appears to be a complex object, your video documentation along with the casual and informative voice over makes this build feel accessible. I hope it inspires others to get out there and Make, Build, or Modify something of their own. Awesome project!

  • @davidsilverhawk3732
    @davidsilverhawk3732 5 років тому

    I started my journey as a fine wood worker over 40 years ago! What an amazing path it has been!!! I have not done it for the last 20 years,but I am back! What you have shown me has blow me away! J R Tolkien said "the most powerful thing we poses is our imagination! Here is the living proof! To use my intellect,soul and courage has given me the biggest thrill in my life! I applaud you on your wonderful journey !

    • @Makebuildmodify
      @Makebuildmodify  5 років тому

      Thanks David! It's good to hear that you've come back to making things again.

  • @mauromiranda9299
    @mauromiranda9299 7 років тому +13

    beautiful, beautiful, beautiful... congratulations for your work.

  • @Mikefence
    @Mikefence 7 років тому +24

    notice the initial drawing at the Beginning some of the very few of the videos that actually display Professionalism in action

    • @Makebuildmodify
      @Makebuildmodify  7 років тому

      Thank you!

    • @sigguy1361
      @sigguy1361 6 років тому +1

      Agreed. I love to draw out my stuff, but I need to get one of those nifty design rulers

  • @smisplacedalaskan1762
    @smisplacedalaskan1762 4 роки тому

    This was very well done. I was amazed at all the random math you were able to pull from your head. Another thing that stood out was how you made the laminated pieces. Never would have thought of that. You've also solved a wood working problem for me. Thank you for the good video.

  • @mikeblaze3456
    @mikeblaze3456 7 років тому +4

    Fantastic job! I did learn quite a bit from your video. The finished lamp was outstanding!

  • @Makebuildmodify
    @Makebuildmodify  7 років тому +39

    This project was prompted by the #two2x4challenge put on by the guys at the Modern Maker Podcast.

    • @1017quin
      @1017quin 7 років тому

      Make Build Modify can you settle a discussion betwixt my gf and myself. She thinks you were great in science and math growing up,and I think that you had a strong mentor that was into woodworking. Which is closer to the truth?

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +5

      It's tough to say what "great at science and math" means. I've been an autodidact as far back as I can remember. I've had no real conventional education to speak of other than a home based education as a child and few interest based college courses. So I'm not sure how I measure up.
      I started part time work in construction at 15 and have been working in that field intermittently in various professional capacities. There were no real mentors to speak of other than massive amounts of on the job experiences. I also had an uncle that was for all intents and purposes a master carpenter. He set a pretty high bar when it came to quality. However, I had very little opportunity to interact as an apprentice.

    • @davestrain1762
      @davestrain1762 7 років тому +1

      I'm smart an stuff to ;)

    • @oojagapivy
      @oojagapivy 7 років тому +1

      I'd say that you have an enquiring mind and the ability to know how to find out how to do "stuff". You've also developed a skill set over your lifetime to put those discoveries into practice. Watching the technical drawing at the start took me back to my university days. Damo

  • @goodgoat3096
    @goodgoat3096 5 років тому

    A very clever, creative, AND of more importance a beautiful design. As a retired former mechanical draftsman turned CAD/CAM project engineer, your manual drafting work was fun to see. This lamp is a wok of art.

    • @Makebuildmodify
      @Makebuildmodify  5 років тому

      Thanks! Yeah, the manual drafting is fun to watch. I think more makers should learn at least the basics.

  • @mikewviolin
    @mikewviolin 7 років тому +9

    that looks so high end! inexpensive material but I can imagine a ton of hours/labor. Beautiful lamp, absolutely awesome

  • @marcusretakenmakes
    @marcusretakenmakes 7 років тому +8

    What an awesome job man. I love it, and you taught me a few tricks along the way!

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +1

      I'm glad it was helpful! Thank for letting me know!

  • @pastorlarrypotts8289
    @pastorlarrypotts8289 5 років тому

    The end product is absolutely gorgeous!!! The process blew me away. You are genius artist. I will save this video to watch again and again. I am so impressed! Thank you for your insightful comments as they are awesome teaching ideas!

  • @TheDirtFighter
    @TheDirtFighter 7 років тому +12

    Two 2X4's became that awesome lamp....That is very impressive.

  • @laurakampf
    @laurakampf 7 років тому +17

    Justin! I am super impressed with this video! so many cool tricks and very well narrated and put together!

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +2

      Thank you Laura! I'm so happy you watched it! I really appreciate your input on the thumbnail too.

  • @vidviewa
    @vidviewa 5 років тому

    I love this twist design.I watched silently in awe of your skills.Well done to you.

  • @mrc6032
    @mrc6032 7 років тому +3

    the moment I think I'm rather clever and too smart.. it's guys like this that bring me right back down to earth. lol

  • @jamiereader
    @jamiereader 7 років тому +4

    That's just bloody brilliant. Stunning project!

  • @nicolasbusse
    @nicolasbusse 4 роки тому

    The quality of this craftmanship is superior. Incredible work, very inspiring!

  • @elkpointtoolco849
    @elkpointtoolco849 7 років тому +12

    Hat's off to the top notch old school drafting (even though your lettering was a bit sloppy!). Nicely done!

  • @thehammstr
    @thehammstr 7 років тому +4

    This is the most inspiring project I've seen in quite some time. Well done! I think I'll make one.

  • @gregmarshall1687
    @gregmarshall1687 6 років тому

    Who ever gave this build a thumbs down I would like to see you make it. I think this was a awesome build. Well done sir

  • @whatsonh5737
    @whatsonh5737 7 років тому +18

    I'm absolutly loving the fact that all machine noises are turned down and you record your voice after you record video. I really hate hearing all that table saws ,grinders.

  • @DaddyBear3000
    @DaddyBear3000 6 років тому +3

    I love the ingenuity as much as the end result. Love the light, it’s earthly and rustic while being made from man-made materials. The plasma TV diffuser is the icing on the cake lol

  • @slashusr
    @slashusr 5 років тому

    Really great build. Your ingenuity, use of materials and execution are matched only by your presentation skill and calm, quiet confidence.

  • @Pedro381ispro
    @Pedro381ispro 6 років тому +6

    The drawing he did at the starting is amazing i keep re watching that part...

    • @Makebuildmodify
      @Makebuildmodify  6 років тому +1

      Thanks! I liked drawing that part too.

    • @neilforehand1121
      @neilforehand1121 4 роки тому +2

      This was a passion of mine growing up in the 60’s and 70’s but not having anyone in my life that could tell me how to use that love of drawing and direct me in the right direction, I settled for something else for a life career. Not complaining just reminiscing. Still like to take out a piece of paper and rulers and design.

  • @ksmithrn2402
    @ksmithrn2402 7 років тому +5

    ok I have watched some of the other 2 2x4 entries and I must say this is my favorite so far.

  • @briandow-masco8991
    @briandow-masco8991 7 років тому

    Justin, you inspired me to choose your UA-cam site my first subscription. Thanks very much! Your video and audio commentary make this project so accessible.
    This week I decided to try the laminations the way you showed it in your video. I did the first two spirals and on the third one though, I tried putting the elastics around the completed laminations and spread the elastics out about 1 inch apart. When I laid them around the tube there was no slippage of the layers and I just had to use ratchet squeeze bar clamps on each end of the tube. I wasn't sure if it would work without the elastics on the big tube but it did work.
    I hope this helps.
    Thanks again for a brilliant project!

    • @Makebuildmodify
      @Makebuildmodify  7 років тому

      That's an interesting idea. I love to see the finished project when you're done.

    • @brianwdow
      @brianwdow 7 років тому

      Hi Justin,
      I'd be happy to send you some shots if you still want to see them. I did use pine as it was what I had on hand. If you'd like to see them, how and where would you like me to post or send?

    • @Makebuildmodify
      @Makebuildmodify  7 років тому

      Could you post them to pinterest and put the links in a comment in this thread?

    • @brianwdow
      @brianwdow 7 років тому

      Hi, Justin. Here is the link you requested. I'll post some additional pictures when I finish the lamp. So much fun to build this project!
      www.pinterest.com/brianwdow11/brians-spiral-lamp-progress-pics/

  • @NickChase
    @NickChase 7 років тому +5

    This is art bro, I'm speechless.

  • @TheAnimystro
    @TheAnimystro 7 років тому +6

    THIS is how you earn a subscriber!

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +1

      Awesome! Thanks for subscribing and commenting!

  • @TB-nb1fb
    @TB-nb1fb 7 років тому

    When modern makers made this challenge, I don't think they anticipated the level of talent that would come from it. I've been watching spectacular 2x4 challenge videos all day today. You killed it man! Nice work.

  • @hotterolive
    @hotterolive 7 років тому +6

    Very creative, awesome!

  • @ryandury
    @ryandury 6 років тому +5

    Man, i really love this. Seems like the kind of project where you have to really work things out on the fly, and you did a tremendous job. Well done!

  • @claytonrealist8868
    @claytonrealist8868 6 років тому

    Wow that was incredible. I have watched hundreds of videos and this is the only one that has ever had me sitting on the edge of my seat the entire time. Very beautiful work.

  • @4px.
    @4px. 7 років тому +10

    Oh that is just awesome! I love the little "tips" you're adding here and there! Turned out something I would definitely buy! :)

  • @jameskirk9427
    @jameskirk9427 7 років тому +6

    best video i've seen in a long time! i bow to you sir!

  • @tcstarz4248
    @tcstarz4248 3 роки тому

    Woooow!!!! This was insane, best work i've ever seen, craftmanship is above all others

  • @HomeMadeModern
    @HomeMadeModern 7 років тому +28

    so good! thanks for sharing!

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +3

      HomeMadeModern Thank you Ben! It was fun to participate in the #two2x4challenge !

    • @RobertFransson
      @RobertFransson 7 років тому +1

      Pippi

  • @JackmanWorks
    @JackmanWorks 7 років тому +5

    Dude!! finally got a chance to watch this, what was an impressive performance :)
    Sometimes I steer away from ideas because I don't know how to clamp them but I'm going to change that!

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +1

      Thanks! Yup, rubber bands worked so much better than I thought they would.

  • @loveVII
    @loveVII 5 років тому

    I'm a high school math teacher and amateur wood worker. Thoroughly enjoyed this video. Subscribing for more.

  • @ItsAdventureTime1
    @ItsAdventureTime1 7 років тому +6

    Love it! What kills me is that most people will see a finished lamp like this and think... $30 at IKEA or Wally world :/

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +6

      Perceived value of hand crafted goods has always been a tough one for me too. It's so subjective. Thanks for watching!

    • @jamestesseyman7141
      @jamestesseyman7141 6 років тому +2

      Jesse Moree
      Or the other way.a shelf made of old pallets being sold on etsy for £300

  • @071453Baxter
    @071453Baxter 5 років тому

    I would have never believed this project had I not watched it. I am totally amazed with what you accomplished.

    • @Makebuildmodify
      @Makebuildmodify  5 років тому

      Thanks John. Yes, I was kind of surprised be the results too.

  • @1QKGLH
    @1QKGLH 5 років тому +14

    I'm just here to say that you should have done it my way. That would have been better. I know that you just made it and it's beautiful, and I've NEVER made one, but I know better because, well, just because. You have 136,000 subscribers, I have none, but I know better.
    - yours truly,
    Typical UA-cam Commenter

    • @Makebuildmodify
      @Makebuildmodify  5 років тому +4

      I know, right!? BTW I laughed out loud!

    • @1QKGLH
      @1QKGLH 5 років тому

      @@Makebuildmodify Glad you got a chuckle. The lamp is stunning. Absolutely beautiful. I'm not a woodworker, but would love to take on the hobby. I was hoping to make a pair, but it's beyond my skill level. Maybe some day.

    • @Makebuildmodify
      @Makebuildmodify  5 років тому +2

      @@1QKGLH Just wondering, do I make it look achievable or intimidating. My goal is to inspire people to make stuff.

    • @1QKGLH
      @1QKGLH 5 років тому +1

      @@Makebuildmodify It looks achievable. If I had the necessary tools, I'd give it a go.

  • @larsanhoj
    @larsanhoj 7 років тому +3

    wow that look amazing...Two 2x4's = brilliant
    You win! ;-)

  • @tokiesgalore
    @tokiesgalore 5 років тому

    Can't tell you exactly how I got here but I watched the video and you did a tremendous job. Definite thumbs up.

  • @alekseychapanov7083
    @alekseychapanov7083 5 років тому +4

    Было бы круче без промежуточных полок, а провод пустить в одной из спиралей👍

  • @sandernielsen8018
    @sandernielsen8018 7 років тому +23

    God Ilove home builders and tinkerers.

    • @Makebuildmodify
      @Makebuildmodify  7 років тому +1

      Ha! Thanks!

    • @mccc4559
      @mccc4559 6 років тому +1

      Wish I had such folks as neighbors instead of all the hot chicks.....they come in handy but a tinkerer friend is forever.....no homo....just saying the truth.

  • @lordsanityfree
    @lordsanityfree 7 років тому

    That rubber band cutting sequence... Oddly satisfying...

  • @steelbluesleepR
    @steelbluesleepR 7 років тому +7

    if you want to do this but DON'T have access to defunct plasma TV's, you can buy diffusion material in a wide gradient of opacity from photography stores and places that rent lighting equipment for film and TV work. every major city has at least one good rental house that will have a wall of rolls tomchoose from. a whole roll is around $120, but you can get off cuts or specific lengths for a good price.

    • @Makebuildmodify
      @Makebuildmodify  7 років тому

      Good to know. Thanks!

    • @steelbluesleepR
      @steelbluesleepR 7 років тому +1

      You're welcome! They don't just have white diffusion either. You can get every shade and intensity of every color of plastic (called gels) you could imagine. Also, gaff tape is complete magic.

    • @Makebuildmodify
      @Makebuildmodify  7 років тому

      Yes, I worked as a product photographer for about 3 years. But we always ordered our stuff.

  • @nicolasfredette8564
    @nicolasfredette8564 5 років тому +3

    You know you've reached "The Dude" level when you build a lamp wearing sandals.

    • @Makebuildmodify
      @Makebuildmodify  5 років тому +1

      Ha! I get some much crap for wearing sandals in my videos. I never thought that it was a sign of "Dudeness". ;)

    • @jagm6430
      @jagm6430 5 років тому

      What about us who wear crocks ? :)

  • @learnerlearns
    @learnerlearns 7 років тому +1

    My hat's off to your Sir.I learned several clever techniques and you produced a beautiful functional object. Really superb and unique!

    • @Makebuildmodify
      @Makebuildmodify  7 років тому

      Thank you! I'm glad you liked it and learned something.

  • @RallEeyeRedact
    @RallEeyeRedact 4 роки тому

    No clue why someone would give this a thumbs down. I’m super stoked on this. I’m totally going to try this some day.

  • @mikem.8367
    @mikem.8367 6 років тому

    OUTSTANDING JOB! Thinking outside of the box for a beautiful and functional masterpiece!

  • @Beschaulichkeit
    @Beschaulichkeit 5 років тому

    Superb work and I particularly enjoyed the traditional drafting at the beginning.

  • @tinaheron5825
    @tinaheron5825 2 місяці тому

    amazing build - love the design and your attention to detail

  • @wdavidortiz
    @wdavidortiz 5 років тому

    the length of the videos and the way they are presented with the fast timelapse is great. why do more people not do this?

  • @foos.998
    @foos.998 4 роки тому

    Very impressive. You’re right, I would have never guessed you started with 2x4s. Rubber bands worked great for even pressure (not to mention the satisfaction of snipping them off!).

  • @b3arwithm3
    @b3arwithm3 2 роки тому

    Really enjoyed watching this unique item. The process with the tube is very clever

  • @themongoloid8944
    @themongoloid8944 5 років тому

    Just stumbled upon this video and your channel today and I have to say THANK YOU SIR!!!! Hoping to watch past videos and keep on learning a little bit when I can. . I am starting my channel with the main subject content to be about building custom guitars and amps, but I like to delve into fixing, inventing, and repurposing everything that I can. I will be checking in for inspiration when I can. Thanks again buddy!!! ROCK ON!!!

    • @Makebuildmodify
      @Makebuildmodify  5 років тому

      Thanks man! Glad you like the channel. Good luck on yours.

  • @LABUSTO
    @LABUSTO 6 років тому

    The rubber bands.... great idea. Allows control as you manipulate the wooden spirals.

  • @search2learn776
    @search2learn776 4 роки тому

    just amazing. i think these kind of works is about self challenge and self satisfaction. salute from Iraq.

  • @bigfootingermany
    @bigfootingermany 6 років тому

    That is straight up total badassery!!! Especially for a 2X4 challenge! Getting that much perceived "motion" and curves from straight boards shows amazing creativity and imagination !! Wow!! Bob in Germany

    • @Makebuildmodify
      @Makebuildmodify  6 років тому

      Thanks Bob! I really appreciate the compliment.

  • @stopthatmikey
    @stopthatmikey 4 роки тому

    What an exquisite project - those spirally curves done in wood are amazing!! And thank you for including the audio when you sped up the tapping of the wood at 6:50, it's pure ASMR goodness!!

  • @kiencastro7978
    @kiencastro7978 5 років тому

    From drawings to actual build man u have skills. i hope i can learn your skills and technique

    • @Makebuildmodify
      @Makebuildmodify  5 років тому

      You can, it just take lots of projects and practice.

  • @viduri
    @viduri 6 років тому

    nice design..... one of the best in youtube lamp designers

  • @brownstonecustomcabinetry5309
    @brownstonecustomcabinetry5309 5 років тому +2

    Why in the hell are you not teaching high school geometry! I probably wouldn't have had to take that class three times if you were the teacher. Real Talk excellent demonstration, excellent conceptualization. You're a Gifted Man

    • @Makebuildmodify
      @Makebuildmodify  5 років тому

      Wow, thank you very much for the complements! I'm happy you enjoyed it.

  • @UltraD52
    @UltraD52 6 років тому

    That spiral layout technique is brilliant!

  • @matthewprince6157
    @matthewprince6157 Рік тому

    5 years later and I'm still in Awe of how amazing this build is.

  • @Jkcreswell
    @Jkcreswell 5 років тому

    That is the most beautiful piece of work I've ever seen!

  • @clausfriishansen2247
    @clausfriishansen2247 3 роки тому

    Many years later - brilliant, seems tricky but not very difficult. Really well done and good inspiration to try out stuff I've never dreamt of!

    • @Makebuildmodify
      @Makebuildmodify  3 роки тому

      Thank you! Just try one spiral lamination. It'll be fun and educational.

  • @duskeyowl2507
    @duskeyowl2507 7 років тому

    Your ability to problem solve is amazing..the way you present and edit the video is outstandingly clear and precise. Oh yes the lamp is spectacular.

  • @robwatchesstuff
    @robwatchesstuff 7 років тому

    it is unbelievably enjoyable to watch you work

  • @Julia-qf8eh
    @Julia-qf8eh 6 років тому

    Fantastic! That turned out great. You have the knack. Thanks for sharing.

  • @dc26dc
    @dc26dc 5 років тому

    WOWWWWW !!!!!!!!!!
    That's one of the best project I've ever seen !
    Good job man !

  • @jeffschmidt
    @jeffschmidt 4 роки тому +1

    Simply gorgeous! Added to my favourites - maybe someday I'll get my hands on a table saw and can try to replicate this build!

  • @laurabenevelli6783
    @laurabenevelli6783 5 років тому

    That lamp is gorgeous. You did a fantastic job.

    • @Makebuildmodify
      @Makebuildmodify  5 років тому

      Thank you Laura!

    • @laurabenevelli6783
      @laurabenevelli6783 5 років тому

      I would love lamps like those but I don't have the tools to make them.

    • @Makebuildmodify
      @Makebuildmodify  5 років тому

      @@laurabenevelli6783 Yeah, I've been collecting tools for over 30 years now. Best to start now.

    • @laurabenevelli6783
      @laurabenevelli6783 5 років тому

      I'm 60. I don't think I'm going to start now. When my dad died I got the house and my brothers got all the tools. (I would have been homeless if it didn't work out that way.)

  • @tracybowling97
    @tracybowling97 5 років тому

    I shouldn't be surprised anymore about the genius idea ppl come up with, especially since UA-cam. But man! That is one beautiful lamp!!! 🔅💡

  • @MovieMike1969
    @MovieMike1969 6 років тому

    Very nice, yet so very simple, anybody could make this.
    It looks fantastic.

    • @Makebuildmodify
      @Makebuildmodify  6 років тому

      Thank you Michael!

    • @MovieMike1969
      @MovieMike1969 6 років тому

      Don't thank me, you came up with this simple yet stunning idea.

  • @mhfarmgirl1969
    @mhfarmgirl1969 9 місяців тому

    Beautifully done! Very easy to watch and listen to.

  • @davidmadisontheguardian
    @davidmadisontheguardian 5 років тому

    Wow... that's a beautiful lamp! A great example of melding science, math, and art all together.

  • @TheWarriorSongProject
    @TheWarriorSongProject 5 років тому

    your imagination is insane. coolest lamp ever.

  • @rickymon1000
    @rickymon1000 5 років тому

    This was an awesome project to watch come to life. I was thinking hey maybe I can try something like this but sir you have way more tools than I. So for now I'll just appreciate your talents and value what I learned. Hey maybe one day I will try something like this.

    • @Makebuildmodify
      @Makebuildmodify  5 років тому

      Thank you! You really should try. Fewer tools just usually means that it will take a little longer, that's all. Thanks for watching!

  • @rkflorida4355
    @rkflorida4355 7 років тому

    Great idea that required real skills to build. Very nice work and great video.

  • @wayneburchwell1977
    @wayneburchwell1977 7 років тому

    I will never attempt this project. I know my limits. But I am so glad you did. I watch these videos for entertainment and to learn. This video is a rare one because it inspired me. Great project. Very creative. And the camera work was good too.

    • @Makebuildmodify
      @Makebuildmodify  7 років тому

      Wayne Burchwell thank you for the kind words.

  • @synergyjohnwv
    @synergyjohnwv 7 років тому

    That was just plain awesome to watch. win or lose on the contest doesn't matter my friend that was a Win no matter how you cut it

  • @kevinwingard6214
    @kevinwingard6214 7 років тому

    Stumbled across this while researching for a very similar spiral project and you may have just saved me a lot of heartburn.Thank you for a well illustrated and well spoken vid. Keep up the awesome work and hope to see you in the dust again soon!!

  • @neology81
    @neology81 5 років тому

    Love this! This appeals to the craftsman and the mathematician alike. Throughout the video, I kept wondering how you’d manage the curves and the angles and the simple solutions you came up with were just elegant AF! Great job bud!

    • @Makebuildmodify
      @Makebuildmodify  5 років тому

      Thank you! I try to keep it simple of possible.

  • @witnwi
    @witnwi 7 років тому

    Wow.... just wow. Excellent job with a lot of creative solutions.

  • @timbarnett6781
    @timbarnett6781 6 років тому

    You did a great job. I hope you placed in the competition.

  • @v1s10nray
    @v1s10nray 5 років тому +2

    Really enjoyed this video. That's not just an amazing lamp it's a work of art.

  • @YYCRCFabricationz
    @YYCRCFabricationz 5 років тому

    Innovative & a beautiful piece, if a guy is allowed to say beautiful in this day and age. Well done, your craftsmanship shows on this lamp, great job!

  • @pjbaddict
    @pjbaddict 6 років тому

    Incredible attention to detail and a fantastic result

  • @f1rstclass596
    @f1rstclass596 7 років тому

    Simple perpendicular physics using rubber bands. Very beautiful.

    • @Makebuildmodify
      @Makebuildmodify  7 років тому

      Thank you! The rubber bands worked much better than I thought they would.

  • @thomastieffenbacherdocsava1549
    @thomastieffenbacherdocsava1549 6 років тому

    Wow, great concept and explanation of the process. You took it to another...creative....level!

  • @anthonyfoti2281
    @anthonyfoti2281 4 роки тому

    Well laid out and explained. Very creative and artistic. Thanks!

  • @giosai1220
    @giosai1220 6 років тому

    regardless of what they are saying on how should it be don or what tool. this is such a badass project! I admire how you got it together, improvising spontaneously it shows quick thinking and forsight on how the project is gonna end. I wish I could come up of something like this.

  • @kevinbrislawn5918
    @kevinbrislawn5918 5 років тому

    I'm humbled by your artistry