How to Replace Air Ride Suspension Compressor 2007-2014 Cadillac Escalade ESV

Buy Now!
New Air Ride Suspension Compressor from 1AAuto.com 1aau.to/ib/1AAS...
This video shows you how to install a new air ride compressor from TRQ on your 2007-2014 Cadillac Escalade ESV.
This process should be similar on the following vehicles:
2007 Cadillac Escalade ESV
2008 Cadillac Escalade ESV
2009 Cadillac Escalade ESV
2010 Cadillac Escalade ESV
2011 Cadillac Escalade ESV
2012 Cadillac Escalade ESV
2013 Cadillac Escalade ESV
2014 Cadillac Escalade ESV
Tools you will need:
• 13mm Socket 1aau.to/obta/1A...
• Trim Tool Set 1aau.to/oaaq/1A...
• Needle nose pliers 1aau.to/oDd/1AX...
• Needle nose pliers 1aau.to/oDd/1AX...
• T25 Socket 1aau.to/oDN/1AX...
• Ratchet 1aau.to/obzW/1A...
• Socket Extensions 1aau.to/obta/1A...
• Gloves 1aau.to/o4v/1AX...
• Safety Glasses 1aau.to/oVH/1AX...
• Hammer 1aau.to/oTD/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@rascoe1717]

Thank you guys for making videos like this. They are very clear, and very thorough. I bought a replacement that came with the housing. But having a video like this gave me a lot of confidence in doing the replacement!

[@24MartinONDS]

How severe would this frame rust be considered? Is it affecting the structural strenght?
Are these GmT900 frames known to rust through?

[@noopdude1]

I can’t seem to re-tighten the two bolts that hold it on. It seems they just slip and turn where they are supposed to tighten

[@Waterboysplash]

I need to know where the fuse for this is lol.

[@BocaAvilez]

I would had cleaned the rust, then sprayed it with a $5 can of black, and the framing also and grease the bolts for future water.

[@IlovetheUSAforever]

THANKS

[@TRQ]

+Miami life Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@kaibinrubber]

❤❤❤