SINGLE SPEED CONVERSION FOR SHIMANO MICRO SPLINE FREE HUB BODY (no hub swap)
Вставка
- Опубліковано 21 лип 2024
- In this video I’m using the @ReverseComponents04 micro spline single speed kit (14T) and the @ReverseComponents04 tensioner. I'm running a 32T @burgtecltd chainring on the front and opted for the 14T cog on the rear. I'm running a 10 speed Gusset Components chain on this set up, you can run 9, 10 and 11 speed chains with the tensioner.
ps I was switching wheels hence the disc was off so no need to remove it if you don't want to.
Let me know if you found this helpful and how I can improve the next video.
Thank you for watching 😊
Microspline single speed kit
www.reverse-components.co.uk/...
Tensioner
www.reverse-components.co.uk/...
0:00 Intro
0:15 Tools & Parts
0:38 Explaining the rear cog spacing
4:08 Checking the alignment using the chain
5:15 Spacing and installing the tensioner
6:54 Working out chain length
9:02 Outro
9:22 Bloopers - Спорт
Yo grt quality vid.. Audio is crisp for so much moving around... Grt work
Thank you 😊
Nice...did you end up taking another link out....do you get chain slap???
Onde comprar?
Nice what is the gear ratio you use on that single speed front and rear cogs cheers
I have a 32T front chainring with a 14T rear cog ⚙️ I also run 165 cranks and on 27.5 wheels 😊👌🏼
@@tam_unleashed i run 36/14 saint 165 cranks on 26” for my single speed downhill bike cheers tam
How do find the correct kit? Been looking at a DH bike but I just want it single speed purely for bike park and up lift etc! Think it’s got E13 wheels!? Cheers👍🏻
Hi, you’ll need to know what freehub you got. Dh bike are usually either hg or xd driver and once you know go with the correct kit and for tensioner I’d either choose reverse or sb one 😊👌🏼
www.reverse-components.com/en/products/single-speed-kits
@@tam_unleashed great thanks!
How is it the microspline reverse components kit is £60 more than the standard one 🙈?
Exactly same problem
awsemoe