Adobe After Effects Tutorial | Content-Aware Fill - WHEN IT DOESN’T WORK

Поділитися
Вставка
  • Опубліковано 28 січ 2025

КОМЕНТАРІ • 433

  • @dregonnadre
    @dregonnadre 5 років тому +67

    Wow this is quality

    • @CodyPyper
      @CodyPyper  5 років тому +1

      DreGonnaDre preciate it!

  • @dansmith9569
    @dansmith9569 5 років тому +38

    Noticed your clock on the iMac started at 9:39am and ended at 2:05pm. Took roughly 4 and half hours to remove him from that single 6 second clip! That’s total dedication!

    • @CodyPyper
      @CodyPyper  5 років тому +2

      Haha yea it takes some true dedication and patience! Working on a similar project right now that’s much more than 4.5 hours and it’s kicking my butt!

    • @MigueldeAguirre
      @MigueldeAguirre 4 роки тому +2

      @@CodyPyper You can use mocha for your masks and 2d tracking to speed up 2X your work.

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Miguel de Aguirre I was wondering if Mocha would work! Thanks for the tip, I’ll have to try that. For this project though i wouldn’t be able to use it though because I can’t get Mocha Track data to come back into AE no matter what I try. Even tech support couldn’t help me make it work. Hopefully the newer versions of AE have fixed it for me

  • @Olufemii
    @Olufemii 4 роки тому +12

    You deserve 1 mil subs. This tutorial was so dope

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Thank you man I appreciate that! Means a lot coming from you

  • @NotFrizyFn
    @NotFrizyFn 2 роки тому +3

    I can't believe literally no one is talking about how satisfying Nice tutorials voice softs.

    • @CodyPyper
      @CodyPyper  2 роки тому

      My voice does soft, tysm

  • @jakehoner1600
    @jakehoner1600 4 роки тому +8

    You are an absolute wizard. I was always so hesitant to use Content Aware because I never believed it could tackle shots like this. But you took a pretty damn complex shot and killed it in comp. Thank you SO MUCH for this tut! Will definitely use this for reference

    • @CodyPyper
      @CodyPyper  4 роки тому +4

      Haha thanks man! I appreciate that. Glad it could help you out. Wanted to make this video because I knew people would either assume it wouldn’t work on complex shots, or get frustrated when it didn’t work perfectly like they expected it too. Sometimes it just takes time learning how something works to know how to use it to your full advantage ya know

  • @FlyingOfficer
    @FlyingOfficer 2 роки тому +3

    You have broken the Algorithm. That's where AI fails and Creators Excel. Outstanding work!!

  • @thethiefman2681
    @thethiefman2681 4 роки тому +2

    this tutorial blew me away with how specific and explanatory you were, left a like, thank you

    • @CodyPyper
      @CodyPyper  4 роки тому

      Absolutely, glad I could help!

    • @CodyPyper
      @CodyPyper  4 роки тому

      I saw your comment about masking. If you’re still wondering this video will explain a bit of that process: ua-cam.com/video/MSPvD0vkRBM/v-deo.html
      Doing a precise mask is helpful, but not critical. More importantly, you need to keep as much of the original background as possible when removing in photoshop. Don’t just press content aware in Ps and call it done. If you have more of the background from another frame, use that to remove the object. If not then clone it and rebuild it very precisely, and make sure to remove areas you may have painted over the original background.

  • @vickiadj
    @vickiadj Рік тому +3

    Late to the party but this video helped me a lot. I use to be afraid to touch After Effects but your video just gave me the courage and confidence to want to play around in it more.

  • @PLVZMA_OFFICIAL
    @PLVZMA_OFFICIAL 2 роки тому +1

    Been watcNice tutorialng your vids for a good few weeks now, learning new sNice tutorialt each day. my worksoftow has improved so much since watcNice tutorialng

  • @zachcarson4
    @zachcarson4 5 років тому +2

    I was watching your video and went to subscribe, expecting to see at least 100K subs, then I saw you only had 397 subs! That blew my mind! You are so talented and the video was very well done! Keep up the great work and I hope to see you at 1,000 subscribers soon!

    • @CodyPyper
      @CodyPyper  5 років тому +1

      Thanks Zach that means a lot! Just started out and growing steady, hope to be at 1k subs soon as well!

  • @mrmikerhubarb
    @mrmikerhubarb 4 роки тому +2

    Dude, I'm new to After Effects so I'm blown away with your skills! Amazing. Thanks for sharing!

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Of course! And just take it project by project and you will gain the skills you need over time, that’s what I did!

  • @OmarZaki
    @OmarZaki 4 роки тому +7

    This is incredible man. Well done. About to do this for my own project. Been avoiding PS for a while now but I guess it’s finally time 🤣

    • @CodyPyper
      @CodyPyper  4 роки тому

      Photoshop is amazing haha! I love it. Do you mean avoiding it for the project or in general?

    • @OmarZaki
      @OmarZaki 4 роки тому +1

      Cody Pyper In general! I only do video work so I spend all my time/energy in PP and AE so I’ve been avoiding learning another program haha

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Haha yea understandable, but trust me - once you get the hang of photoshop you’ll realize how much potential it has for making your life easier, even in the video world. Might make a video about this because photoshop knowledge has really come in handy throughout the years

    • @OmarZaki
      @OmarZaki 4 роки тому +1

      Cody Pyper Yeah and I’ve kind of known that for a while that it could make my life easier but still avoided it 🤣 LOL

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Haha well best of luck to you! Have some photoshop videos in the works, but lemme know if you have any questions along the way 🙃

  • @arielreyes001
    @arielreyes001 4 роки тому +4

    This is excellent, thank you so much!! Been wanting to understand the reference layer for so long now. You rock!

    • @CodyPyper
      @CodyPyper  4 роки тому

      Thanks! Glad it helped, it was confusing for me too at first. If you really want to dive deep into reference layers check out the second part of that tutorial: ua-cam.com/video/MSPvD0vkRBM/v-deo.html

  • @maheshbabupedhabogina4264
    @maheshbabupedhabogina4264 4 роки тому +2

    sir iwant content aware fill plugin link to download on windows plz

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      It isn’t a plug-in - it’s actually built right into after effects!

  • @petersolomon5227
    @petersolomon5227 5 років тому +3

    A very nice job. The only other recommendation I would suggest is pre-denoising the clip/s, then reintroducing noise or grain after the FX have been done.

    • @CodyPyper
      @CodyPyper  5 років тому

      Thanks for the suggestion! Would you suggest this even if denoise isn’t needed?

  • @SheilaHouse
    @SheilaHouse 2 роки тому +1

    Great tutorial. How do you proceed to remove more than one object in a video? Thanks. Is there a more detailed tutorial on this?

    • @CodyPyper
      @CodyPyper  2 роки тому

      Yes, I’ll post a few links to my other tutorials that will help!

    • @CodyPyper
      @CodyPyper  2 роки тому

      ua-cam.com/video/MSPvD0vkRBM/v-deo.html

    • @CodyPyper
      @CodyPyper  2 роки тому

      ua-cam.com/video/efQg0RABrL8/v-deo.html

    • @CodyPyper
      @CodyPyper  2 роки тому

      This one I remove two things in one comp!
      ua-cam.com/video/nvKt9pnpS8s/v-deo.html

  • @lazer_boardz
    @lazer_boardz Рік тому +1

    Hey I was trying to do this with text and it doesn't really work. any tips?

    • @CodyPyper
      @CodyPyper  10 місяців тому

      What is happening that isn't working?

  • @SangokHaii
    @SangokHaii 2 роки тому +1

    basics it's encouraging to learn a little bit more! Well done!

    • @CodyPyper
      @CodyPyper  2 роки тому

      Yes! A well written comment is appreciated around here

  • @berchten
    @berchten 4 роки тому +1

    Certainly More Advanced Stuff, thanks! Is there a step by step runthru of the reference Image step to get better result?

    • @CodyPyper
      @CodyPyper  4 роки тому

      Yep! You’re looking part 3: ua-cam.com/video/efQg0RABrL8/v-deo.html
      But I also have a really helpful part 2:
      ua-cam.com/video/MSPvD0vkRBM/v-deo.html

  • @_dinesh
    @_dinesh 4 роки тому +3

    This is mind blowing!! You just made it look so easy. I am so sharing this video to everyone I know. You deserve more subscribers! 💕

    • @CodyPyper
      @CodyPyper  4 роки тому

      Thank you! Much appreciated

  • @lazercoregood5792
    @lazercoregood5792 5 років тому +8

    Subbed! You deserve more subscribers

    • @CodyPyper
      @CodyPyper  5 років тому

      Lazercore Good thanks for the sub!

  • @nligonsii
    @nligonsii 3 роки тому +1

    Awesome work Cody!

  • @Fadetoblackcollective
    @Fadetoblackcollective 4 роки тому +1

    Want to see more of the Photoshop part, a lot of creators skip past that, but it's really important for people learning to know 🙌🏿

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Yes! A lot of people requested that so I made a whole video about it: ua-cam.com/video/efQg0RABrL8/v-deo.html

    • @Fadetoblackcollective
      @Fadetoblackcollective 4 роки тому +1

      @@CodyPyper ayeee!! Thank you!!

    • @CodyPyper
      @CodyPyper  4 роки тому

      You’re welcome! Let me know if you have any questions as well

  • @Alcinos
    @Alcinos 5 років тому +1

    How. In. The. World!!! How is even possible you have only 191 subs?!? I land in this video and im like "Oh good, a very big AE UA-camr, maybe 500k or so..."
    Men, this is really high quality. That about reference frame wasn't even mentioned in other tutorials. Good luck and see you when you have a million subs

    • @CodyPyper
      @CodyPyper  5 років тому +2

      This comment made my day, so thank you! Means a lot. Started just recently and working hard to grow my channel and produce really good content

  • @izuchukwuhyginusokoye8218
    @izuchukwuhyginusokoye8218 2 роки тому +1

    who has been blind their whole life and can finally see. I can't express my gratitude in words but tNice tutorials is the best I can do. THANK YOU SO

  • @teamEP789
    @teamEP789 4 роки тому +1

    a note. instead of masking around the heads, you can make extra masks on each head, and set them to "Add"

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Yesss, then you can track them individually too. That’s a good note

  • @blaylock1978
    @blaylock1978 4 роки тому +1

    Nicely Done! Quick question f anyone knows... Can you create different more than one reference frame at different points in the timeline so if the video changes drastically, the content aware has more to work with? I have tried this but maybe I'm missing something or it's not possible. Thank you!

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Thanks man! And yes you absolutely can. That’s actually the best way to do it in my opinion. Here’s another tutorial I made breaking that process down: ua-cam.com/video/MSPvD0vkRBM/v-deo.html

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      In addition to that tutorial here’s a quick note that helped me tremendously when I’ve worked with clips that change drastically: you may want to break it up into sections instead of doing one long fill layer. Maybe at different points where a big change happens, so the content aware fill is filling in similar data inside of each section. Does that make sense?

    • @blaylock1978
      @blaylock1978 4 роки тому +1

      @@CodyPyper Ah, so break it up into several comps that eventually stitch together into one clip?

    • @blaylock1978
      @blaylock1978 4 роки тому +1

      @@CodyPyper Of course you made a tutorial breaking down that exact thing. Ha. Thank you! Your example was the best I've seen explaining the process too.

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      You can do it that way if it’s a big clip, might be easier to keep it organized. But in the past I’ve kept it in the same comp and just worked left to right and changed the work area to only create the fill layer for each small section at a time

  • @raquelkiara4792
    @raquelkiara4792 2 роки тому +1

    Thanks so much for your thoughtful and detailed videos! On to the soft!

  • @maheshbabupedhabogina4264
    @maheshbabupedhabogina4264 4 роки тому +2

    in which version we can find content aware fill plz tell me sir

    • @CodyPyper
      @CodyPyper  4 роки тому

      I’m pretty sure 2019 and above

  • @aon7587
    @aon7587 2 роки тому

    Thank u so much, interested in starting so soft during quarintine and just need a place to get started, thx for the support

  • @vorval96
    @vorval96 4 роки тому +1

    Man! This is insanity!!
    Great tutorial!!

  • @arslanmahmood
    @arslanmahmood 5 років тому +2

    Hi Cody Pyper, that's a really amazing tutorial. I am actually facing a problem. So, I basically want to remove a power extension from the shot but the problem is, we use smoke as its a music video. After effects can't fill the area because of changes in texture. I hope you understand my question.

    • @CodyPyper
      @CodyPyper  5 років тому +2

      Thanks! And yes I think I know what you mean, the best way to fill it will be a mix of using AE Content Aware fill, and then taking some pieces to overlay over top of where AE messed up. Either creating clones in photoshop or in AE, you'll have to manually create and track some of the fixes on there. It's really tough but short of recreating something in a 3d environment, it's the best way I know how to do it!

    • @arslanmahmood
      @arslanmahmood 5 років тому +1

      Cody Pyper Thanks for the advise. I will look into this.

    • @CodyPyper
      @CodyPyper  5 років тому

      You’re welcome, let me know how it goes!

  • @MuhammadNurbasit
    @MuhammadNurbasit 5 років тому +17

    imagine doing this for a whole concert

    • @CodyPyper
      @CodyPyper  5 років тому +6

      Don’t make me lol

    • @_dinesh
      @_dinesh 4 роки тому +1

      that would be a 6 months project haha.

  • @toutekale7885
    @toutekale7885 4 роки тому +1

    Damn ur good, subbed + notif bell. Crazy how the youtube algorithm only shows me hot knife videos when this is what im trying to watch. Keep it going :)

    • @CodyPyper
      @CodyPyper  4 роки тому

      Haha thanks! Appreciate the support!

  • @yassinsherif5196
    @yassinsherif5196 2 роки тому

    Incredibly knowledgeable and we'll-spoken teacher. Nice tutorials comfortableness with the subject makes starting soft real exciting!!

  • @williedrone262
    @williedrone262 4 роки тому +1

    Great tutorial! thank you!!!

  • @010abhimanyu2
    @010abhimanyu2 4 роки тому +1

    this the kind of tutorials we need!!

  • @mariajuliamedeiros399
    @mariajuliamedeiros399 2 роки тому

    Thank you ! You did a great job simplifying such a complex daw....Looking forward to be a great producer

  • @fernw4486
    @fernw4486 2 роки тому

    Thank u soo much. i was wondering y it didnt soft the sa for as well

  • @yusepriyadi1117
    @yusepriyadi1117 Рік тому +1

    You are really the best Cody, but i have some issue here, could you give me some advice here?
    i have a couple shot of a girl jumping from the building but the fireman stopped the girl, and the girl has rope installed to her. i should remove the rope and uisng mocha, using content fill aware it doen't work. any advice? will send you the sample shot if you reach the comment. Thank you so much

    • @CodyPyper
      @CodyPyper  Рік тому

      Yea send me the sample I’ll see if I can give you some advice!

    • @yusepriyadi1117
      @yusepriyadi1117 Рік тому +1

      @@CodyPyper thank you so much, and anyway i already send the shot to your email. once again thanks Cody. Cheers

  • @nickkirastoulis4617
    @nickkirastoulis4617 Рік тому +1

    very nice tutorial. I had and idea though which may remove your use of the secondary tracking and null object. instead of just rotoscoping the cameraman for the content aware fill, maybe try doing the same thing to a chunk of the audience where ghosting may occur. so that ghosting can happen further out that you can remove with a mask. then rotoscope the audience's heads back in.

  • @MattJackson_YouTube
    @MattJackson_YouTube 4 роки тому +1

    Great video, sir. Thank you so much!

    • @CodyPyper
      @CodyPyper  4 роки тому

      You are welcome! Glad it could help you out

  • @AndrewMurphyFilms
    @AndrewMurphyFilms 5 років тому +1

    Dude this is dope as! Your videos are awesome! Subbed

  • @BlueShedProductions
    @BlueShedProductions 5 років тому +1

    Quality tutorial, id imagine you will have many subscribers soon! great work.

    • @CodyPyper
      @CodyPyper  5 років тому

      Thank you! That’s the goal haha

  • @TheGamingChad.
    @TheGamingChad. 3 роки тому +1

    one question, does premiere pro and after effects use the same content aware tools? can this be achieved with premiere pro?

    • @CodyPyper
      @CodyPyper  2 роки тому

      No, Content Aware Fill is only available in After Effects currently

  • @FamilieNetra
    @FamilieNetra 2 роки тому +1

    This got me something amazing for real, brother. Thanks and God bless!

  • @subhashkini7
    @subhashkini7 4 роки тому +1

    Excellent job!!! Underrated video.

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Subhash Kini thank you! Preciate the love 👍🏼

  • @dreamersdayproductions8564
    @dreamersdayproductions8564 5 років тому +2

    I just learned something today. Thank you so much keep making more tutorials!

    • @CodyPyper
      @CodyPyper  5 років тому +2

      Awesome! And I actually have a new updated Content Aware After Effects Tutorial that I’m working on... stay tuned!

    • @CodyPyper
      @CodyPyper  4 роки тому

      Here are my two newer tutorials on Content Aware, by the way:
      ua-cam.com/video/MSPvD0vkRBM/v-deo.html
      ua-cam.com/video/efQg0RABrL8/v-deo.html

  • @dashantpanigrahi
    @dashantpanigrahi 3 роки тому +1

    This video is great but I have one problem it's saying " caf. Out of memory" after that content aware thing going to 15%. Please help.

    • @CodyPyper
      @CodyPyper  3 роки тому

      Try making sure your disks have plenty of space

  • @francischristopherabad6710
    @francischristopherabad6710 4 роки тому +1

    Why did when I hit the preview, the generated mask did not appear? I got a moving black smudge mask that I made?

    • @CodyPyper
      @CodyPyper  4 роки тому

      My guess would be you added a reference frame, but didn’t remove anything. If you did add reference frames, check to make sure you removed the object in each frame.

  • @rahmatheking
    @rahmatheking 2 роки тому

    Can you tell how to change softal instrunt in Serum, please ?!

  • @davidflannery1973
    @davidflannery1973 Рік тому

    Thank you! Other tutorials had the mask expansion way too high - 1 worked best

  • @yassinhabiballah3852
    @yassinhabiballah3852 4 роки тому +1

    for some reason my reference frames dont show in the actual video, but they show in the layer menu. Help please?

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Do they show up in the timeline? If you turn off everything else in the timeline except the reference frames, do they show up? They are just one little frame so they may be hard to find. Also, can you reveal the ref frame in finder and see if there is any data within the file?

    • @CodyPyper
      @CodyPyper  4 роки тому

      Did you fix the issue?

  • @naviydo
    @naviydo 2 роки тому +1

    i dont have the generate fill layer option

    • @CodyPyper
      @CodyPyper  2 роки тому

      Make sure you have a mask that is set to subtract

  • @Daemae999
    @Daemae999 2 роки тому +1

    Thank you so much, I’m learning tNice tutorials in quarantine and you made it very simple I really appreciate it, thank you for going over every little

  • @DerMedienIngeniuer
    @DerMedienIngeniuer 4 роки тому +1

    Why are you rotoscoping by Hand if you have Mocha?

    • @CodyPyper
      @CodyPyper  4 роки тому

      Great question, idk if the issues been resolved on my computer yet, but Mocha does not work for me anymore in AE. Can’t copy the tracking data or anything. Very frustrating. But that’s a good point for me to remember to talk about that on my videos that involve masking 👍🏼

  • @zach_blackburn
    @zach_blackburn 5 років тому +1

    I know both Cody and Jesse in real life. Such great guys. Give Cody a sub.

    • @CodyPyper
      @CodyPyper  5 років тому +1

      IRL friends are where its at

  • @drprince19
    @drprince19 4 роки тому +2

    I am getting this message while applying content aware fill.
    after effects warning: caf: external library failure
    What does it mean. Please tell me!

    • @CodyPyper
      @CodyPyper  4 роки тому

      Hmm I haven’t seen that before, but try clearing your cache files and making sure you have enough space on your computer. The Content Aware Fills can take up a lot of space. Let me know if that doesn’t work!

  • @thelemonenergy609
    @thelemonenergy609 4 роки тому +2

    Im glad youtube recommended this. Your channel is gold! take my sub :)

  • @kumargaurav2207
    @kumargaurav2207 5 років тому +1

    help fast!what to do when the object is blocked?

    • @CodyPyper
      @CodyPyper  5 років тому +1

      Just move your mask off the edge of the frame completely

  • @CoMmAnDeRYT
    @CoMmAnDeRYT 5 років тому +7

    Please make full tutorial , talk about everything including photoshop part too
    Upload in 3-4 parts so I would be better

    • @johnvallance3969
      @johnvallance3969 4 роки тому +1

      @codypyper did this ever happen? need it! great job one these

    • @CodyPyper
      @CodyPyper  4 роки тому

      Yep! Here’s part 2: ua-cam.com/video/MSPvD0vkRBM/v-deo.html

  • @worksfromla_
    @worksfromla_ 5 років тому +1

    FANTASTIC TRICK AND TUTORIAL OVER ALL! Any way you can break down the middle part of the video from copying many refs to how to open those refs into photoshop please? I am having a hard time finding the files for my project using your same techniques. THANKS SO MUCH!!

    • @CodyPyper
      @CodyPyper  5 років тому +1

      Hey, I will try to break that down more in a future video, but just for clarity, are you referring to the part at 4:14 where I export a few more stills to help remove Jesse in photoshop?

    • @worksfromla_
      @worksfromla_ 5 років тому +1

      Yes, that is correct. No need to go into detail how to remove something in photoshop. Just the creating references, how to save and use. It wasn't working for me when I was trying it, so I think I messed up somewhere along the way.
      THANK YOU SO MUCH!!!

    • @CodyPyper
      @CodyPyper  5 років тому

      @@worksfromla_ again, you're welcome! So did my comment clear it up or are you still getting stuck on that step?

    • @worksfromla_
      @worksfromla_ 5 років тому +1

      @@CodyPyper , sadly still getting stuck. You can email me if you'd like if that makes it easier, instead of doing a whole video. I completely understand the production life and juggling time with projects.

    • @CodyPyper
      @CodyPyper  5 років тому

      @@worksfromla_ Sure - send an email to codypyper33@gmail.com and I'll see if I can help you get unstuck

  • @nestedphotography
    @nestedphotography 5 років тому +1

    Impressive tutorial. Very helpful! Nice shot of Masonboro in the intro ;)

    • @CodyPyper
      @CodyPyper  5 років тому

      Thanks man! And shhh it’s not Masonboro, its a “deserted island” lol

  • @Jay-wr1wh
    @Jay-wr1wh 3 роки тому +1

    Hi Cody. I think this will help me with the scene I'm working on that I emailed you about or am I missing something?

    • @CodyPyper
      @CodyPyper  3 роки тому

      This should work for you!

    • @Jay-wr1wh
      @Jay-wr1wh 3 роки тому +1

      @@CodyPyper Thanks Cody.

    • @CodyPyper
      @CodyPyper  3 роки тому

      Yea! Hope I was helpful for you, let me know if you still need me to explain step 3 further. The idea is shown at 9:41 in this tutorial: ua-cam.com/video/MSPvD0vkRBM/v-deo.html
      In the video I used a reference frame, but it can be done with any still frame.

    • @Jay-wr1wh
      @Jay-wr1wh 3 роки тому +1

      @@CodyPyper Oh nice. Thank you!

  • @fouryearproductions
    @fouryearproductions Рік тому +1

    If you are filming 4K doesn't it take forever to analyze and render?

    • @CodyPyper
      @CodyPyper  Рік тому

      Not forever, about 10ish minutes for a short clip like this id say

  • @marlon8714
    @marlon8714 4 роки тому +2

    Hi I'm having an issue where I keep getting this error message "All target frames are completely opaque (no holes to fill). The Content-Aware-Fill layer generation for Comp (name of comp) has been aborted". I'm sure I'm doing everything right and I don't know what's wrong

    • @CodyPyper
      @CodyPyper  4 роки тому

      Thanoes hey - that usually happens when your mask is not set to “Subtract”. Check to make sure that your mask is on subtract and try generating the fill layer again. Does that fix it?

    • @1DarrenChoy
      @1DarrenChoy 4 роки тому +2

      @@CodyPyper Wow this is really good!! What happens when you set it to subtract but its still unable to generate frames? I'm also having an issue with content aware generating blank frames..

    • @CodyPyper
      @CodyPyper  4 роки тому

      @@1DarrenChoy Hmm, I haven't seen that yet. Make sure your work area bar is set to the right part of the timeline. I might try starting a new comp and copying and pasting the mask to that to see if that helps. If not, try a whole new project, new comp, add footage, and do a really simple mask set to subtract and then do content aware - does it still generate blank frames? That could rule out a few different issues that it might be

    • @natearts
      @natearts 4 роки тому +1

      @Cody Pyper just wanted to say, I'm having the same issue, haven't found a solution yet...

    • @CodyPyper
      @CodyPyper  4 роки тому

      Gotcha - and you’re sure that it’s on subtract? Can you see through to the transparent checkerboard? Also is your work area bar over your footage?

  • @paoprika965
    @paoprika965 3 роки тому +1

    I am trying to remove something from a blue sky. After rendering I get this error message CAF: external library failure(Adobe::PM::Exception)
    Have you ever had this issue and know how to solve it? Thank you

    • @CodyPyper
      @CodyPyper  3 роки тому

      I haven’t, maybe it’s that you don’t have enough storage space on your comp?

    • @paoprika965
      @paoprika965 3 роки тому +1

      @@CodyPyper I'm not sure, I could still save some big files after that. I'll try with another video. Thanks for your tutorial :)

  • @MyDigitalHub
    @MyDigitalHub 4 роки тому +3

    Now this is Content Quality Fill!

  • @katharineparsons2171
    @katharineparsons2171 5 років тому +7

    This was really well done. I think it would be faster though if I just paid you to fix my footage!

    • @CodyPyper
      @CodyPyper  5 років тому +3

      I’m open to that!

  • @andrewriddle1570
    @andrewriddle1570 5 років тому +1

    Would love if you did more AE tutorials! This was very helpful.

    • @CodyPyper
      @CodyPyper  5 років тому

      Glad it was helpful man! I plan to make more soon so be on the lookout 👀

    • @CodyPyper
      @CodyPyper  5 років тому

      Any suggestions to cover?

    • @andrewriddle1570
      @andrewriddle1570 5 років тому +1

      @@CodyPyper I'd love if you did a video on the Photoshop shop part and how that helped you in After Effects.

    • @CodyPyper
      @CodyPyper  5 років тому

      In this video I go into it a little deeper: ua-cam.com/video/MSPvD0vkRBM/v-deo.html
      But I have a video coming out soon that might also help clear that up!

    • @CodyPyper
      @CodyPyper  4 роки тому

      @@andrewriddle1570 In case you missed it, here is a follow up video on that exact topic! ua-cam.com/video/efQg0RABrL8/v-deo.html

  • @Digifx69
    @Digifx69 4 роки тому +1

    Can you do it again with ca 2020?

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      I do have a video I’m about to release for CAF 2020 explaining the new “lighting correction” check box. Is that what you’re referring to or nah

    • @Digifx69
      @Digifx69 4 роки тому +1

      @@CodyPyper yes would be awesome to see the difference!

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      You got it man! Be on the lookout in the next 1-2 weeks! (Hopefully sooner)

  • @nickhain8617
    @nickhain8617 4 роки тому +1

    when i click generate fill layer it opens window to save something when im saving is says error i need help

    • @CodyPyper
      @CodyPyper  4 роки тому

      Hmm. I haven’t seen that happen. I would try saving and then quitting after effects and try again. Or try restarting your computer. Hope that helps!

    • @nickhain8617
      @nickhain8617 4 роки тому

      @@CodyPyper i id that but idont know what to do i really want ro replace myself to movies

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Hey I just stared a series on how to put yourself into a movie! Here’s the link to part 1, let me know what you think! ua-cam.com/video/CE9YPVD_ygI/v-deo.html

    • @CodyPyper
      @CodyPyper  4 роки тому +1

      Did you get it fixed yet?

    • @nickhain8617
      @nickhain8617 4 роки тому +1

      Cody Pyper oh i just saw yiur repoy now thanks for being so generous and yeah i fixed by myself i went into content aware fill setting and selected 3 of the dots and i fixed it btw im gonna see your link because content aware fill doesnot work that well❤️❤️

  • @damianthomas6549
    @damianthomas6549 3 роки тому +1

    Awesome man good looking out.

    • @CodyPyper
      @CodyPyper  3 роки тому

      Aye glad it could help

  • @Osamasam200xEZuhairi
    @Osamasam200xEZuhairi 4 роки тому +1

    amazing work

    • @CodyPyper
      @CodyPyper  4 роки тому

      Thank you! It was pretty fun haha

  • @CoMmAnDeRYT
    @CoMmAnDeRYT 5 років тому +1

    Can we use roto brush instead of pen tool?

    • @CodyPyper
      @CodyPyper  5 років тому

      Idk that’s a good question! I think you can because it just takes whatever “holes” are created using the a subtracted mask, so I assume the roto brush would work too

    • @CoMmAnDeRYT
      @CoMmAnDeRYT 5 років тому +1

      @@CodyPyper that's Nice
      By the way What PC Specs Do you have .
      Do You Think i7 + RTX 2060 is Good ?

    • @CodyPyper
      @CodyPyper  5 років тому

      @@CoMmAnDeRYT Yes those specs are good! I'm now using a 2014 iMac with i7, 32GB Ram, and AMD Radeon R9 M295X 4 GB, so your graphics card is definitely better than mine. Of course there are some other specs to consider, but compared to mine that looks pretty good

    • @CoMmAnDeRYT
      @CoMmAnDeRYT 5 років тому +1

      @@CodyPyper imac Vs Windows , which will you prefer

    • @CodyPyper
      @CodyPyper  5 років тому

      @@CoMmAnDeRYT I see the benefits and drawbacks of both. All things considered Windows might be my next move, but with price out of the equation I prefer Mac

  • @saurish0
    @saurish0 2 роки тому

    im having a problem when i put gms and na the patter "app" it doesnt soft like what it was in the video its a loud annoying soft

  • @entertainmentcenter6977
    @entertainmentcenter6977 4 роки тому +1

    Nice quality.
    Thanks

  • @yovelshoval5139
    @yovelshoval5139 5 років тому +1

    Hi bro i cant success to remove properly the watermark without getting any shadow what can i do?i try do remove logo watermark on the middle of the screen and this "improvemnet" still distract the view

    • @CodyPyper
      @CodyPyper  5 років тому

      Why are you trying to remove a watermark?

    • @yovelshoval5139
      @yovelshoval5139 5 років тому

      its matter?

    • @CodyPyper
      @CodyPyper  5 років тому

      Just trying to help you achieve your goal, so knowing why you’re trying to remove it would help me better help you. Best way to remove a watermark is paying the owner of the content. If not, you’re probably stuck with the watermark honestly, unless you want to go frame by frame and remove it manually. But I would assume it would be better to just pay for it considering how long that would take, and your time is (probably) worth more than the cost of the footage

    • @yovelshoval5139
      @yovelshoval5139 5 років тому

      ​its a supplier video like selling product which wrote few texts and i just want remove them properly

    • @yovelshoval5139
      @yovelshoval5139 5 років тому

      i saw something about mask and maybe open the ps and clone and get then a little mess wow if you can make some video on that it will be great

  • @KathirRockz
    @KathirRockz 3 роки тому +1

    @cody Pyper This is lit !! Very helpful

  • @JonathanSulivan666
    @JonathanSulivan666 2 роки тому

    Hello, please tell me what to do if an error appears after effects the Warning CAF out of memory ?

    • @CodyPyper
      @CodyPyper  2 роки тому

      I think you need to make sure your hard drive/disk cache has enough space

  • @Gonzalitus8
    @Gonzalitus8 2 роки тому

    Hey, I just wanted to check briesofty if there is a way for to import a new soft into the program, for example softs or sotNice tutorialng that

  • @roxannemarieamistoso6058
    @roxannemarieamistoso6058 2 роки тому

    In The setup hey bro i wanted to know how do u load your Sample guide into the packs in the browser?

  • @MidnightReala
    @MidnightReala 5 років тому +1

    What song did you use for this?

    • @CodyPyper
      @CodyPyper  5 років тому

      It's called Easy Does It by Egon Stone (or The Dolorean) I got it from Artlist, but I don't know if it's still available

  • @nauka9634
    @nauka9634 5 років тому +1

    nice job, bro. Much more detailed work than in the usual tutorials~.

    • @CodyPyper
      @CodyPyper  5 років тому

      Thanks! Yea, I always appreciate more details when I'm trying to figure something out, so thought I would do the same

  • @Clifton100
    @Clifton100 4 роки тому +1

    thanks Bruh, Very professional video.

    • @CodyPyper
      @CodyPyper  4 роки тому

      You’re welcome my guy!

  • @fadyosama7000
    @fadyosama7000 2 роки тому +1

    I bought the Fruity Edition and tNice tutorials tutorial helped out a lot!

  • @neilseiffer
    @neilseiffer 5 років тому +1

    Great tutorial and explanation...how long did it take for you to complete this project? How much RAM did you have installed your computer to work in After Effects in real time...or reduce quality to 1/4 or 1/8 for smooth playback?

    • @CodyPyper
      @CodyPyper  5 років тому +1

      Thanks! It took me about 4 hours to complete this particular shot, and I actually only have 12GB RAM installed right now 😞. But working on a Mac Pro with a pretty good graphics card. I actually didn’t have playback in real time, I usually would hit play and wait for it to render each frame and then playback. I sped up the times in the video so you didn’t have to wait 😎

  • @derekpemberton4020
    @derekpemberton4020 2 роки тому +1

    Its attractive how calm tNice tutorials guy is

  • @GhosthubTV
    @GhosthubTV 4 роки тому +1

    Wow nice , thank you so much , keep it up bro...

  • @TanerProd
    @TanerProd 2 роки тому

    The video was so helpful!Thanks a lot!

  • @SliwkaProductions
    @SliwkaProductions 4 роки тому +1

    Amazing! Thanks for this tutorial 😄

  • @strandskovmedia4606
    @strandskovmedia4606 4 роки тому +1

    Awesome! I would love to see the PS aswell :-)

    • @CodyPyper
      @CodyPyper  4 роки тому

      Here is the video I made about the photoshop section!
      ua-cam.com/video/efQg0RABrL8/v-deo.html

  • @Chuvachello
    @Chuvachello Рік тому

    How can I use this plugin for AE 2018 if I don't have it?

  • @lifeasakingstonlaak8843
    @lifeasakingstonlaak8843 5 років тому +1

    Awesome tut! Subbed... Do you have a video walking thru the details, that breaks down all the specifics of this process?

    • @CodyPyper
      @CodyPyper  5 років тому +2

      I don’t at the moment, but I am considering doing one because quite a few people have asked

    • @CodyPyper
      @CodyPyper  5 років тому +1

      If you have a question about something in particular, feel free to ask

    • @CodyPyper
      @CodyPyper  5 років тому

      Here ya go!!
      Advanced Content-Aware Fill Tutorial in After Effects | Deep Dive into Photoshop ua-cam.com/video/efQg0RABrL8/v-deo.html

  • @ArseniyRoks
    @ArseniyRoks 2 роки тому +1

    thanks, i will do my best to have patience for tNice tutorials because i normally don't have much, i wish there were chapters here so i could skip

    • @CodyPyper
      @CodyPyper  2 роки тому

      Yea maybe I’ll add chapters in actually, good point

  • @utkarshsonawane
    @utkarshsonawane 4 роки тому +1

    Awsmmmmm work mannnn...🔥🔥✨

  • @marhawi565
    @marhawi565 2 роки тому

    Nice tutorial Michael,

  • @gunberriesgame7680
    @gunberriesgame7680 5 років тому +2

    Abit too fast for beginner like me but blew my mind what AE can do. Subscribed!

    • @CodyPyper
      @CodyPyper  5 років тому

      Thanks for the sub! And yes it took me a while to dive in to AE but it is powerful for sure

  • @Yennas
    @Yennas 3 роки тому +1

    It only fills it for 1 frame, i've already tried this for about 10 times and it still hasnt worked yet

    • @CodyPyper
      @CodyPyper  3 роки тому

      Hey, we’re you able to get it to work?

    • @Yennas
      @Yennas 3 роки тому

      @@CodyPyper no, i gave up after checking other tutorials and not being able to fix it

    • @CodyPyper
      @CodyPyper  3 роки тому

      Man. That sucks. Here are a few things to that may help:
      -Make sure your layer mask is set to subtract
      -Make sure you have enough storage on your comp for it to make the fill layer (it creates a lot of pngs)
      -Try starting fresh, with a new project and doing a test mask and fill, and see if it works. Maybe your project file is messed up or corrupt?
      -Try using AE beta or upgrading to the newest AE. Just to see if that fixes it
      -If that doesn’t work, feel free to email me a video or screenshots of the problem, and maybe I can help you out!

    • @Yennas
      @Yennas 3 роки тому +1

      @@CodyPyper ty i'll try these tomorrow

  • @life_Of_Bowie
    @life_Of_Bowie 5 років тому +1

    Hey Cody,
    Curious what you are using to record your screen. Resolution looks great.

    • @CodyPyper
      @CodyPyper  5 років тому

      Hey Matthew, I use a program called iShowU Instant, has a ton of great recording options and is pretty affordable!

    • @life_Of_Bowie
      @life_Of_Bowie 5 років тому +1

      Sweet. Thank you

    • @CodyPyper
      @CodyPyper  5 років тому

      Matthew Bowie yea no problem 👍🏼