Check Hybrid System Warning Light

Поділитися
Вставка
  • Опубліковано 28 лип 2024
  • In this video, we're going over the Prius rattle and hybrid system warning diagnosis. If you're experiencing either of these symptoms, be sure to check out our video for a solution!
    The Prius rattle and hybrid system warning diagnosis is a symptom that can be caused by a number of things. If you're experiencing any of these symptoms, be sure to check out our video for a solution. We'll discuss the root cause of the problem and give you tips on how to fix it!
    Comment and let me know what you think! Also, If you think I've earned it, considering subscribing to the channel - it helps a ton!
    0:00 Engine Rattle
    0:40 Issues I Have
    0:55 HV Battery Diagnosis and Checks
    03:49 Bus Bar Cleaning
    05:56 High Voltage Service Plug
    06:17 Button Up and Test Drive (Gone Wrong)
    RECORDING GEAR
    - Sony Alpha a7 IIK a.co/d/2BgryL5
    - GoPro Hero 9 Black a.co/d/8yaxiJz
    - Editing Suite: Adobe Creative Cloud
    \\ Follow me on TikTok @LoganMace
    #toyotaprius #headgasket #deathrattle
  • Авто та транспорт

КОМЕНТАРІ • 103

  • @igorl8367
    @igorl8367 7 місяців тому +3

    I had a sudden loss of power and triangle of death also showed. I was able to coast on hybrid battery for about a mile. Then towed it to a dealer. I was afraid it would be expensive, but they actually fixed it for free. Turns out, most of the hybrid things like inverter, relays, etc - are under some mysterious forever warranty.

    • @LoganDidItYT
      @LoganDidItYT  7 місяців тому

      I’m glad it wasn’t more serious! But, I didn’t know they were covered “forever”- that’s awesome.

    • @hedgehogthesonic3181
      @hedgehogthesonic3181 3 місяці тому +1

      So what they fixed on your Prius, what was it???

    • @LoganDidItYT
      @LoganDidItYT  2 місяці тому

      If you’re asking me, it was a head gasket and water pump.

    • @hedgehogthesonic3181
      @hedgehogthesonic3181 2 місяці тому +1

      @@LoganDidItYT Well that sucks

  • @MeyersCTR
    @MeyersCTR Місяць тому +2

    I know someone mentioned a code reader. I got one to use on my wife’s car that had a maintenance nag, but didn’t say what maintenance. The day it came in, my car (Prius) wouldn’t start and then started showing the “check hybrid system” error. With the code reader, I immediately determined the 12v battery was too low and what charge it did have drained very quickly. I ran a more in depth check and got an error code having to do with the hybrid system. Searched the internet and if pointed me to a few UA-cam videos for an easy fix - the drive battery disconnect wasn’t locked properly. Easy fix.
    I’m glad I spent the 13.99 or whatever I spent on the reader. I was going to have it towed to the dealer first business day. That would have cost me large multiples of 13.99.
    Get a reader. With all that going on in your electronics, I couldn’t imagine it not giving you some clues to go on.
    Good luck. Your problems scare the heck outa me.

    • @LoganDidItYT
      @LoganDidItYT  Місяць тому

      I did get a hybrid system warning with a low 12 volt before. But, my problems were a bit more involved than that- head gasket and water pump(s). It took a few water pumps to get a good one, but it’s been good for a while now.

  • @OMC0624
    @OMC0624 Рік тому +3

    This is the final! I replaced what you guys recommended for all problem parts and have studied for, last 6 months.
    The problem source for the rattling or misfire is the head gasket.
    I did all... replaced the spark plugs, fuel injectors, ignition coil, EGR valve, EGR Cooler, PCV valve, and Intake manifolds...
    After replacing the above parts, it's good for a few days then rattling again.
    The rattling for a few month then the engine will be broken. The problem cylinder which keeps misfiring has lost compression (most cases are cracked on a piston but its piston keeps moving because of the other cylinders' firing then the piston arm hit the engine wall and made a hole. The engine is broken. This is the future steps of your rattling Prius.
    The most reason for the misfiring is a head gasket problem near the problem cylinder if the same misfiring is keep going after replacing the spark plug or ignition coil. I see many of the same cases and am very upset about how can Toyota make the engine like this?

    • @LoganDidItYT
      @LoganDidItYT  Рік тому +1

      A blown head gasket can eventually cause a hole in the engine block or bent piston rod. Why this happens is because you cannot compress a liquid; there is liquid coolant leaking into your cylinder which can’t be burnt and when it’s compressing it can only do one of two things: bend a rod, break through your block.

    • @markallison8854
      @markallison8854 11 місяців тому +1

      ​@@LoganDidItYTmy 2008 Toyota Prius. There is a connection right above the battery going towards the blower motor for the battery. This connection gets corroded from a leak in the hatch . This happens to all 2004 to 2009 Prius. Every TOYOTA Prius I have bought I put electric grease on it and have bypass the connection and hard wire it in . This control wires are for the fan and will shutdown the car and have the triangle of death

    • @markallison8854
      @markallison8854 11 місяців тому +1

      ​@@LoganDidItYTI also sealed my back hatch as it leaks around the bolt holes for the cylinders supports and 2 bumper stops they have bolt holes.

  • @aibekakmat3696
    @aibekakmat3696 4 місяці тому +1

    You saved my day at 6:05. Thank you so much!

    • @LoganDidItYT
      @LoganDidItYT  4 місяці тому +1

      Awesome!! I’m glad to have helped!!

  • @diydantex6150
    @diydantex6150 10 днів тому

    You can get a code reader for under $60 that will read the hybrid codes and give live data on the inverter and battery. The Topdon topscan is one. The topdon requires a phone or tablet. I have reviewed a few scanners on my channel. In the US there is a very good warranty on the inverter. For $25 you can get 2 day access to Toyota manuals so you can see what you are checking.

    • @LoganDidItYT
      @LoganDidItYT  10 днів тому

      Yep! Mine is a Bluetooth scanner and works great; only $30 on Amazon!

    • @diydantex6150
      @diydantex6150 9 днів тому +1

      @@LoganDidItYT do you get all 250 hybrid PIDs in the live data view? If so that is a good deal.

    • @LoganDidItYT
      @LoganDidItYT  9 днів тому

      This one uses an app and can link with any app. I use the free Car Scanner app and it does show all of it. The only thing it can’t show is the traction battery data (hybrid specific stuff), but Dr. Prius does and it’s free too.

  • @OrbOPic
    @OrbOPic Рік тому +4

    Hi Logan... try taking off your intake manifold cleaning that theres vids on youtube an also beneath that theres a AC valve clean that to or replace with a newbie.... vid on youtube too. also put some engine flush in then dump your oil, put new oil in with a new oil filter then clean your VVT valve with carbi cleaner gett all biuldup off it so thats nice an shiny in the recesses/channels n' center pin theres vids on that too.. see how that goes.. lets hope it not a head gasket there'd be build up under the coolant cap... but sounds like intake/vacuum related.

    • @rakunfps
      @rakunfps Рік тому +2

      Great info, not experiencing these issues yet but might as well tackle some of these things before they become a problem. Really appreciate the descriptive comment though!!

    • @OMC0624
      @OMC0624 Рік тому +2

      This is the final! I replaced what you guys recommended for all problem parts and have studied for, last 6 months.
      The problem source for the rattling or misfire is the head gasket.
      I did all... replaced the spark plugs, fuel injectors, ignition coil, EGR valve, EGR Cooler, PCV valve, and Intake manifolds...
      After replacing the above parts, it's good for a few days then rattling again.
      The rattling for a few month then the engine will be broken. The problem cylinder which keeps misfiring has lost compression (most cases are cracked on a piston but its piston keeps moving because of the other cylinders' firing then the piston arm hit the engine wall and made a hole. The engine is broken. This is the future steps of your rattling Prius.
      The most reason for the misfiring is a head gasket problem near the problem cylinder if the same misfiring is keep going after replacing the spark plug or ignition coil. I see many of the same cases and am very upset about how can Toyota make the engine like this?

  • @Hector-qt5rn
    @Hector-qt5rn Рік тому +6

    I had my 2011 Prius with 215,000 miles do the rattle a few cold mornings and i found out it was the head gasket. I ended up using half of Blue Devil head gasket sealer Pour n Go bottle. I followed instructions and looped the heater core hose so it would not get clogged up. My wife and i thought i had to replace the engine but the next morning it no longer showed white steam and havent lost any coolant. Just to be safe i also drained and refilled with clean coolant. The performance was kinda bad and felt sluggish and i had read it was due to clogged PVC valve,EGR,EGR cooler, and intake manifold, so i though i could just pour a lot of B12 chemtool in the gas tank to clean carbon out but no luck. I finally took apart all the parts above and used my pressure washer and carb cleaner to leave them like new and car runs way better now! Let me tell you that the EGR cooler was 100% clogged! I sprayed almost 1 can of carb cleaner and nothing came out the other side until i pressured washed it. Definetly keep an eye on those parts with any 3rd gen prius. I also got the Check Hybrid warning on dash but i just forgot to slide the orange connector back on properly. It had me worried!

    • @LoganDidItYT
      @LoganDidItYT  Рік тому

      I did most of what you’re saying to clean everything. And, I fixed the EGR, but now I’m almost certain it’s a head gasket (even though there is no coolant in the oil). I will put this in the next Prius video, but: I had some weird codes after the EGR fix, and after this video and clearing the codes it did start smoking white, so it’s definitely burning coolant.

    • @Hector-qt5rn
      @Hector-qt5rn Рік тому +1

      @@LoganDidItYT you should try the white label Blue Devil pour n go head gasket sealer. I used only half the bottle and unhooked the heater core hoses and looped them with the plastic tubing from the flush and fill kit at walmart. Any tubing that can handle 220f or more that fits both the heater core hoses is fine. It worked for me and i dont know how long it will last but if it buys me another 15k miles then i'm happy. I also put it in maintenance mode for 55mins with heater on high per bottle instructions.

    • @LoganDidItYT
      @LoganDidItYT  Рік тому +1

      @@Hector-qt5rn that was one thing I’d considered. I ordered a head gasket, but I’ve gone back and forth between what I’m going to do. I may try that first, though.

    • @caioghiotto
      @caioghiotto Рік тому +1

      I was there just like you. Same exactly problem. Same mileage. I started calculating the fixing options and unfortunately it's not worth fixing it. By the time you got it working with the gasket sealant you should drive to a dealer and trade with something.

    • @royflores9987
      @royflores9987 Рік тому +3

      I had the same problem I changed the head gaskets and now the car is running perfect

  • @daverobbo27
    @daverobbo27 Рік тому +3

    I had a similar noise. I disconnected the electric connector plug on the egr. Noise went and had better mpg. Mine has 270k miles on it now and sometimes comes up with check hybrid system on the dash. Think it's ready for the knackers yard.

  • @michaelambrose2736
    @michaelambrose2736 2 місяці тому +1

    To the person that made this video, thank you! I'm experiencing this same problem right now. What ended up being the problem?

    • @LoganDidItYT
      @LoganDidItYT  2 місяці тому +1

      Hey! Well, it was a combination of things. My issues were the water pump and head gasket. A few things can cause the master warning though, so I’d suggest buying an inexpensive code reader and checking to see what comes back from that (I have a video on that too).

  • @animefan7931
    @animefan7931 Рік тому +4

    May seem like a dumb question but after looking through the comments and replies and pausing on your radiator overflow tank it appears you have no coolant in it. Could you be overheating the ICE?

    • @LoganDidItYT
      @LoganDidItYT  Рік тому

      Not a dumb question! At that point I had put water in it instead of coolant - but it had some in it (albeit not full) because I had checked the water pump when I got a code for it. It was the head gasket.
      I did end up replacing the pump, which I show in a later video, but at this time I had taken it off to see if there was resistance. I just didn’t show it in the video.

  • @DarthShazbot
    @DarthShazbot Рік тому +1

    Intake manifold! Just did this with my 2010. Change the PCV valve while you have it apart! Don't skip out on it!

    • @LoganDidItYT
      @LoganDidItYT  Рік тому +2

      Yep! But it also turned out to be the head gasket… unfortunately. I have it in a later video. I had a few problems all at once.

    • @DarthShazbot
      @DarthShazbot Рік тому +1

      I did actually do the head gasket as well before the intake. I didn't think it was related though because after the gasket, it still shook. Did you do your intake first, and it still shook??

    • @LoganDidItYT
      @LoganDidItYT  Рік тому +2

      @@DarthShazbot I cleaned the intake completely and the EGR cooler, etc. still did it and got worse. I then found coolant in my oil AFTER that, so it was confirmation to me.

  • @brit2919
    @brit2919 Рік тому +2

    head gasket , the reason is water pond goes bad living head gasket to over heat, so change head gasket and water pond

    • @LoganDidItYT
      @LoganDidItYT  Рік тому

      Yep, I made some later videos where I did fix both of those!

  • @rosaritomex4223
    @rosaritomex4223 Рік тому +2

    If you get p 300 p 301 p302 p303 p304 cylinder misfire its a headgasket 2010 to 2016 its common 150k 190k miles.

    • @LoganDidItYT
      @LoganDidItYT  Рік тому +2

      Yep! It was the head gasket. I made some other videos. It wasn’t the only issue, but it was the big one obviously.

  • @umairsohail828
    @umairsohail828 2 місяці тому +1

    It’s your fuel pump it has gone bad basic problem with the prius don’t replace it just make sure you keep that tank over half . I have the same issue with my 2011 prius

    • @LoganDidItYT
      @LoganDidItYT  2 місяці тому

      Nope not the fuel pump for this one. It was a combination of things: water pump then head gasket.

  • @scooby-tm8yk
    @scooby-tm8yk Рік тому +3

    fuel pump maybe (it will give a triangle error).

    • @LoganDidItYT
      @LoganDidItYT  Рік тому +2

      I made a few other videos on this, it ended up being a combination of things but ultimately the head gasket.

  • @rosaritomex4223
    @rosaritomex4223 Рік тому +4

    I took my 2012 prius with 175k miles to Tijuana Mexico they installed a fle- pro headgasket for $500 was done in 4 hrs.

    • @LoganDidItYT
      @LoganDidItYT  Рік тому +1

      Wow. That’s not bad at all

    • @jasperj8021
      @jasperj8021 11 місяців тому +1

      Do you have the shop address

  • @HelpingHandAutoRepair
    @HelpingHandAutoRepair Рік тому +3

    Did you solve the rattling? Or is that still present also?
    Do you have a code reader? Have you check for codes?

    • @LoganDidItYT
      @LoganDidItYT  Рік тому

      I’m getting one tomorrow to check, not entirely sure if it’ll read all the codes. The rattle is still there but goes away after a few seconds- so the EGR valve itself could be bad. I didn’t replace it just cleaned all the EGR stuff. The intake may need more cleaning too.
      Or, I was talking to a Toyota service guy today and he said something about an EGR that’s been bad for a while can cause all that stuff to work down on the springs of the clutch and the rattle will, according to him, never go away.

    • @HelpingHandAutoRepair
      @HelpingHandAutoRepair Рік тому +1

      @@LoganDidItYT If you have any misfire codes, have you replaced the spark plugs and/or coil packs? Did you clean out the little egr ports in the intake manifold I mentioned to you in the last video?

    • @LoganDidItYT
      @LoganDidItYT  Рік тому +1

      @@HelpingHandAutoRepair I did clean the intake, but I’m wondering if I didn’t clean it good enough. I didn’t check the plugs just yet, but it runs for 10 mins and does what it does in the video. Shuts down. It’s almost predictable how it does it now.

    • @HelpingHandAutoRepair
      @HelpingHandAutoRepair Рік тому +1

      @@LoganDidItYT I see, I’m sure you know as well but I don’t think the two are related. Hopefully you can get some codes out of there to point you in the right direction.

    • @HelpingHandAutoRepair
      @HelpingHandAutoRepair Рік тому +1

      @@LoganDidItYT you probably cleaned it just fine. Makes me thing your spark plugs (especially if they have never been replaced) and /or a few coil packs might be bad if the codes come back pointing to a specific cylinder.

  • @chadvandyke2201
    @chadvandyke2201 Рік тому +1

    Inverter cooling pump and leaking head gasket

    • @LoganDidItYT
      @LoganDidItYT  Рік тому

      Close! Water pump died at the same time as the water temp sensor and the head gasket was leaking.

  • @royflores9987
    @royflores9987 Рік тому +1

    I had the same problem, I change the head gaskets and now the car is running perfect.

  • @jasondominguez8434
    @jasondominguez8434 Рік тому +3

    That’s your water pump making that whining noise, needs to be replaced

    • @LoganDidItYT
      @LoganDidItYT  Рік тому +1

      You’re right! I made some later videos where I fix that and some other things. There were a few issues all at once.

  • @HAMADBAHI
    @HAMADBAHI Рік тому +1

    Hello brother my prius 2012 model problem is that engine check light and traction light is on in same time after car didn't switch to battery

    • @LoganDidItYT
      @LoganDidItYT  Рік тому +1

      But the engine is running, just doesn’t go to battery operation?

    • @HAMADBAHI
      @HAMADBAHI Рік тому +1

      @@LoganDidItYT yes bro engine is running not change to the battery

    • @HAMADBAHI
      @HAMADBAHI Рік тому +1

      @@LoganDidItYT what is this problem please tell me

    • @HAMADBAHI
      @HAMADBAHI Рік тому +1

      @@LoganDidItYT I showed the first car to the mechanic two days ago, he said that 2 cells are bad, so I changed those two cells and when I drove the car, the engine lighted on

    • @HAMADBAHI
      @HAMADBAHI Рік тому +1

      @@LoganDidItYT ?

  • @terryterry1655
    @terryterry1655 Рік тому +1

    Egr?

    • @LoganDidItYT
      @LoganDidItYT  Рік тому

      I did check and clean all the EGR stuff, and intake ports, but it ended up being a head gasket (plus some other things); it all seemed to really snowball.

  • @lilmsgs
    @lilmsgs Рік тому +6

    I think youtube has shadow banned me. Can anyone see this comment?

  • @rosaritomex4223
    @rosaritomex4223 Рік тому +1

    If its your dc inverter it has a unlimited miles warranty 15 years i got mine replaced for free.

    • @LoganDidItYT
      @LoganDidItYT  Рік тому

      That’s good to know, I didn’t know that!