1018 Reusing A Washing Machine Motor As A DC Motor Or A Generator
Вставка
- Опубліковано 5 лют 2025
- If you want to have a look at those special videos become a member and join by clicking this link / @thinkingandtinkering
Don't forget that you can buy my books and materials for your own experiments including our conductive inks at secure.working... - and for the many who have asked, yes, you can also donate to further our work, again through the shop.
I've seen this explained several times before and this was by far the clearest and easiest to understand. Thanks for sharing it with us :)
You're very welcome!
I'm deaf but I could hear and understand every word. Thank you for speaking so clearly and for the good sound quality. Some videos have zero intelligibility for me.
Great video! I've stayed away from AC motors in my projects so far, but this has opened up a whole new world to get spare parts from :) Thanks!
Your gift for explaining the difficult to the ignorant is amazing.
I always wanted to know how to wire these motors Robert. Now that I watched the video my knowledge of universal motors has gone up a notch. Nice work fella too.
Thank you so much Robert! 👍
Great explanation and a new approach for the old washing mashine motor that I extracted decades ago (laying around ever since). I was brooding about the best application for it since a couple of weeks now (inspired by some video from you), just a bit desperate of how to get over the lack of static magnets without rebuilding the whole bunch of steel, iron and copper.
Since the efficiency is lousy, compared to modern electric car motors (in terms of power-to-weight ratio), I'll probably go for generator use.
Therefore I won't wast any more time and head for your next uploaded video ("1016 Washingmashine to Wind Turbine)...😄
Thank you Robert for a wonderful procedural video on using AC motors or converting them and for the in depth description of the wiring pinout. I am concerned about you however...I worked as a master electrician at a company called ACA( Aluminum Coil Anodizing)..and so I have years experience working everything electrical...when working with these motors.5 hp and greater please take care to not get any dust in your lungs or even on your hands ..believe me you will save a lot of grief when you get older...
Thank you so much for this, I'm currently converting my old Front-loader washing machine into a dirt classifying machine for gold prospecting, so I'm re-using as many components as I can.
This is going to be VERY USEFUL info, and will let me run it off a battery, rather than a Generator.
Thank ee Sur! Once again, you have tought this young paduan something about the force ;-)
Really appreciate how you explain what you're doing in a way most people will understand!
Quick snap shots of the different methods of wiring would help those of us not so used to stuff please?
An amazing explanation. When I thought of "how can I repurpose my old washing machine motor?" you were the go to guy. Thank you ^_^
oh wow - cheers mate
Excellent video, only one I could find who simply and properly explained it
Brilliant video, thank you. Just getting started with creating a wind generator. This is gold.
such a good video, about a decade ago i rescued one of these motors from an old W.M. wanted so much to make it work but mi huge lack of knowledge keep me from achieving anything. Now it's all more clear, it's a shame that it had to get rid of it :(. Congrats on the video it was a missing part of the puzzle in my head, thanks so much!!!!!
Oh WoW, I have never thought about it in that way. Magnetic torc and brushes give speed... Awesome, see a year later and I'm still learning stuff from you, lol
lol - awesome mate
@Rayden Eliseo This has nothing to do with the topic, and is Spam
Great information. Again, you show how smart you are with these things.
cheers mate
Very cool video Rob. Got to love the versitility of washing machine motors. They have so many uses, I have an old alternator I'm wanting to use in a similar fashion.
me too mate lol
I've got one of those motors and did not even think about DC. I will be doing that . Thanks
awesome mate
Thank you for sharing I've learned so much about how things work😁 much appreciated blessings back to you😇💖
Thx for explaining that in a understandable way! Finally someone that isn’t just talking electrician jargon!
When using the motor as a generator , If you have a secondary power source on the stator windings, you actually turn it into a dynamo and should be able to generate more power at low RPM. You could also use the speed sensor to switch off the stator power when the armature is not turning, could be useful if connected to a wind turbine.
for sure mate - cheers
That is actually how some larger generators are started. For those large permanent magnets are not an option. To get going they need an initial magnetic field which is provided with external power. Once started they can power itself for this purpose.
This was a real good one Rob! my old brain followed along well and I like the duel control of speed and torque.. Now I need a project to go along with this one.. I think maybe a small electric crane for my work shop area.. to help lift those weird parts that you just can not grab efficiently.
I like that idea mate
@@ThinkingandTinkering Thanks Rob.
Got one laying around. Didn't know what it might be good for.....Great video, as always. Thanks.
glad you liked it mate
Same here. Looking forward to setting it up now.
Thanks for making it all so simple. You really are a true inspiration!
cheers mate and i really do hope it helped
This might work for your e tractor, you can set it to torque mode when accelerating from a stop or going up hill and switch you speed mode with less torque once you are underway.
What a great instructor you are , thank you.
Just a tip.. I don’t know if you noticed it also, I noticed I could not see the digital display because of the glare until you put your arm over it that caused the shadow over the digital display allow me to see the digits. Thank you for the video! I learned a lot!
Thanks Robert.
Jeremy Fielding did a whole series on using different reclaimed motors if anyone is interested in going deeper into this topic.
he did indeed mate - this is basically a quick how to
Thanks for showing how to identify wires!
Series wound DC can also produce a runaway condition if not under load, and your armature will fly apart (too many rpms!)
To more reliably make a DC generator, energize the field coil (not series wound) - then spin the armature, and that field coil will induce a current in the armature...
Home made DC vehicles frequently use a 9-inch Netgain (or similar) motor, series wound (i.e. Armature & field coil in series). Push in the clutch, wind that motor up to its highest rpm, and you'll blow up a $1500+ (USD) motor. Series wound DC not under load will runaway from you if given enough current.
Finally a good and understandeble describtion of how to do this 👍😁
Glad you liked it!
I got two of those lying around....time to put them to action 😂
Hi. Really enjoy how you explain things. Saw this thing supposedly designed by Nickola Tesla now called the "Ultimate off grid generator". Was hoping you mite take a look and test if it's actually wat they say. Thanks for your time.
The only problem with your videos is the camera work. Never captures the full scene. Otherwise this is one of the best channels.
Thanks for sharing this idea. Using washing machine as a generator may help people to produce their own electricity in case of long term blackouts happens. Also converting it to a DC motor may be used as water pump motor to grow vegetation or home made transportation vehicles.
loads of uses for what people often think of as trash - love it mate - cheers
Brilliant. Really enjoy your channel .Keeps me brain alive
thankyou Mr Smith, in England, i think ?? got one just like it, from salvaged whirlpool washer....will check it out, maybe make a dc grinder with it, using homemade 12 18 or 24 volt MOT rewound, and some other for variable speed.....
Please take this the right way. When you die (god forbid) donate your brain to science so humanity can learn and benefit from your knowledge of all things👍
Id love to learn more about converting washing machine motor as dc motor in the way you describes with 2 dc volts to control both spedd and tourque
Thanks a good demonstration and explanation of those mystery wires.
Glad it was helpful!
Thank You very much, I have a couple of washing machine motors and need to learn as a total newby, how to wire them.
I agree with Zen Zens comment, thank you so much for your help
Thanks so much for this. It really has cleared things up for me.
I have one sitting on a shelf that needs a project to go into, now I know how to use it.
One of my favorite videos thus far! This was extremely useful to me, I learn a great deal. Thank you so much /\
I am really pleased to hear that. mate - cheers
@@ThinkingandTinkering 99 97th axis. ‐&&;;;" g NJ h .m
@@ThinkingandTinkering 99 97th axis. ‐&&;;;" g NJ h .m
Hi there Rob have you seen the video of a man converting a a fridge compressor in to a direct generator for television and a water pump absolutely marvellous
I'll have to hunt it out mate - cheers
Here in the USA I have never yet come across such motors...
I remain hopeful.
I did notice that a lot of fractional horse power motors int he US tend to be induction motors - that is a shame - but you also often find universal motors in power tools
I've found you can get good power out of electric lawnmower motors with a 3-phase rectifier. They require a controller as a motor to run. But as a generator you just need a rectifier
Great explanation Robert,thanks.
Great cheers. Was wondering what to do with my motors👍💛
Glad I could help
Ralph, you can make a miniature gold mining plant. Conveyer belt and rolling drum I just salvaged 5 mtrs from a 3 in one printer. Im so happy, lol! I will use the small stepper to power both the conveyer and the drum.
Well I think I enjoyed your presentation but I would need to save it and review it over my eye left eye was flickering madly but I will go back and watch it again and again I would love to learn this convention I’m doing a project and this will help me out thanks oh yeah my eye is better no more flickering lol
Thanks for the video. I have used a washing machine motor to run a small industrial sewing machine running on 24 volts DC. All goes ok except I get some significant arcing on the foot switch. I'm thinking it is from a back EMF from the inductance of the motor. Any ideas on how to stop it.
Thank you. Electricity……truly amazing.
You are a total rock-star, brother!! I had no idea that washing machine motors had at least 4!!! different uses: AC generator, DC generator, AC motor, DC motor!🤪
I'm currently building a drop-shaft lawnmower gas engine powered AC generator set with its own four-plex of 110 volt AC outlets. I'm also going to install a 120 volt, 15 amp breaker in it to prevent accidents. The generator will be belt driven and sit upside down above the gen-set's open box frame.
I'm really excited right now, thank you.
Jason Wampler
W A M P L E R
Thanks for putting this back up, oh this is different.....
The seperate stator supply is a good idea. This way it can be efficient as a low voltage DC motor. If you put them in series as they normally would be torque will be very limited on low voltage DC.
Stator and Rotor connections are connected seperately to the control board because if you want to run the motor in the opposite direction you need to connect either stator or rotor connections the other way around. On both AC or DC, does not matter.
These motors have a more or less constant torque for any rpm. That is they will increase RPM till either the load provides the same torque back as happens in your video on low DC voltage ( where mechanical load is just air and bearing resistance ) or they'll fly apart into pieces due to centrifugal force. Torque is more or less constant because of rotor winding inductance which will decrease rotor current a bit at high rpm.
This is old technology now. Virtually every modern washing machine will have a brushless motor and an electronic inverter circuit to create the rotating field. The big version of what you'll find in for example harddisk drives to rotate the platters or the paper advance motor in many laserprinters.
Damn... I'd better try scrounge a few of them old ones while they're still around.
direct drives are coming in mate but still many many makes use this kind of motor - it will be a few years before these can no longer be found - I think 5 -10 years myself
@@ThinkingandTinkering i agree. TMT = Too Much Technology. would like to vision, a SIMPLER WORLD. high tech is an addictive greedy method, of 'making home appliances ' I have a 30 year old washing machine, with about 18 push buttons, and an orbital transmission, top load. High Efficiency washing machines, how can they produce clean clothes..?....don't use enough water. Never a problem........not a MOSFET controlled dryer, either.....(whirlpool junk) have a Duet dryer in garage, won't even spin the drum, just hums, till i give the drum a 'hand' start....good day, sir, enjoy your tea and crumpets...
@@ThinkingandTinkering Yeah, you are probably right. I only see so many washing machines .. mainly when mine or a friend's need repair.
@@petersack5074 Actually a mosfet is a much more robust way to switch hi current than a mechanical switch is. The thing is that is only so for a well designed circuit and for a well known load. A poorly designed circuit can and will fail maybe in a few cycles or maybe in a few thousand cycles. When mishandled parts of the die get's eaten away in every cycle till the point it fails. For triacs it's the same. For example a too high dI/dt where current gets too high when only part of the die is conductive yet.
Invaluable, thanks Rob.
cheers mate
Gr8! Question: how would the wiring look like to up the output voltage by passing a DC voltage across the coils?
Finally, no techno music and hot glue!
Thanks for explaining. Would you need a DC voltage similar to the AC mains voltage (i.e. 230 V DC) to run the motor at full rated power?
Excellent.
Like an Alstrom motor in vintage marklin loco's.
1930's tech. :))
So you can generate without supplying power to the field coils?
That is one of the things that always stopped my bothering with washing machine motors.
I'm so sad now!
You can use a washing machine door glass as a nice salad bowl after putting it through a dishwasher.
@frugaldiy1 when the centrifugal switch is taken off of the motor. 1-6, 3-5, 5-6 all switch ok. All three are the opposite nc/no when switch is installed.
Except 3-5 is always closed. Installed or not and does not open when the sliding ring on the mower is pushed over.
Any ideas? Would this cause a no heat issue. All the other safety switches seem to be good.
This kinda rial stuff, reasonable principles
In theory it might actually work
"True internal power of Capacitor"
in short -we could discharge capacitor inward
instead of outward, and inward voltage is
higher then outward, by a lot.
When tiny wire ascend to plane between "+" and "-"
plates of capacitor, its concentration of charge
would increase(therefore voltage on them).
And when charge reaching midst plane between "+" and "-"
it could effortlessly leave capacitor through
(within) its plane (because distance to "+" and "-"
equal in this plane)
======
What if charge on capacitor plates could leave
capacitor effortless and unleash its true power.
Which usually foreshadowed by nearby opposite charge
(push mines pull(outward force))
But inward force dont foreshadowed and have all of its
true tremendous strength(as if its solitary charge)
And its strength isn't a joke , at all!
If we could remain it intact and go outside with it it
would be a great output power(output voltage), could we?
And we do have such a place for charge on a way inward(from
capacitor plate) , or better to say such a plane
And it right amidst "+" and "-" plates.
Charge could move within this plane effortless
(because distance to "+" and "-" is equal for any point
in this plane)
So charge could maintain all of its true power and
leave capacitor within(through) mid-plane (as far of
capacitor as it want)
Its mean we might obtain great power then
Because we pull in low voltage and it push out high
voltage (with the same quantity of charge)
How it might be done :)
Just tiny wire which descend from "+" or "-" to midst
(between them) and wend aside through mid-plane through
with all true voltage.
Concentration of charge when it reached amidst would be
great , meanwhile there no force to hinder it within
mid-plane:)
Therefore we may see that voltage actually
rise in a way inward and lowered in the way outward
Its just mind-blowing (really unexpectedly)
=====
2)
=====
HOW MIGHT WE OBTAIN ENERGY from SURROUNDING TEMPERAUTRE
MAY WE?
Might we built thermal motor with 100% efficiency?
This model SAID yes , how? Read below and enjoy the journej
(and therefore have possibility to obtain energy from the surroundings without consuming some fuel though in theory)
(let it be in the vacuum )
Shocking but fact - this motors already convert 100% heat energy into pover
BUT!!! (how it might be without it) in the First Stage when it expand to the point where temperature equal environment temperature
(simple machine which consist of piston , cylinder, gas inside it)
In the Second stage we should compress volum emiting heat to the environment with the same temperature what environment has and therefore waste energy (even nothing to contain
thermodynamic allows us contain overheat without effort but in this case we dont have overheat)
So if we can avoid second stage we can save efficiency(and it might remain 100%)
And solution how to avoid waste power of compressing gas is... :)
Dont use GAS !
we might USE LIQUID heated to the boiling temperature (boiling temperature depends on pressure on piston, let it be atmosphere pressure 1 Bar/100 kPa)
So we boil water, expand volume with 1BAR pressure, supply heat 212 F/ 100 C
in the process, then we store remain warm(overheat if compare it to the environment temperature)
And - without effort return piston to the start position(thats it, all what for all of it,
this key component, we got it)
In the next stage we return stored warm into system and supply additional heat
intto the system
And repeat it again and again never emit any heat to the surroundings
All warm eventually would become power.
We heated water, we get what we want(power)
we store remain overheat to the storage with 0 effort
in order to use it in the next stage, and repeat
we use heat in storage , then supply additional heat
and repeat it again and again without waste of energy
therefore all warm energy will become power even though not at once
(thi is idea)
if we talking about water , temperature of boiling water is 212 F/100 C
Coefficient of efficiency may be something around 4 (0.25 points input power to obtain 1 point warm energy)
And all iof it as we could see , might be converted to power
another words input 1, output 4 , difference would obtained from surroundings warm (another words it may be little bit colder if then)
===
3
===
And let's see another one oportunity
What if magnet field(force what affect the straight section of wire per miter(not coil))
might be almost constant, as weight force per kilogram near earth surface.
So to obtain interaction similar to straight section of current
we should stretch opposit current away from us.
(we dont deal with this bullish... North and Sourth mythicale poles, its just interaction between parallel currents in plain)
If source of force far enough and its force enough powerful
we may obtain almost constant force per 1 weight/current/charge
But what means dB =0, it literally mean that opposite Voltage
U=dB/dt = 0 as well,
But its only concerns motor without magnet in this case
because F*L still the same and we don't elaborate some method to turn off magnetic domains yet :)
Additionally if that "far away current" wasn't a permanent magnet
rotation of our motor stil would be induce some very tiny Voltage,
which means it should require Voltage for insane amount of current.
But luckily we may use permanent magnets.
-------
Another similar model
is model which consist of battery, resistance (R=1) and electric transformator but not like letter O but like I , lust straight piece of
ferrite.
Type of signals "quadrupol" U =1 I(current) =1
So we have battery 10 volts, 10 amps, consequently attached resistor and transformator
But transformation would be afeccted by the current, thats why we were include
cylindric magnet around transformator to compensate 10 amps current.
-----------
So without input supply input power to the trunsformator
we have 10 Amps 10 Volts = 100 watt
When we turn on transformator input will be then
11 amps 10 volt from battery, and 1 amps 1 volts from transformator
= 110+1=111
Output heat power in resistor 11 volts, 11 Amps =121 watt
121 >111 , we get 10 wats more
BUT!
lets see what would happen when we replace permanent magnet to
coil wit 10 Amps, 0 Volts
We should maintain current when transformator turn on , and therefore our Voltage will be 10 Volts.
HERE IT IS -this 10 wats waste
Therefore we see that permanent magnet could gain power into system by just remaining CURRENT the same
Nowhere saw describe like this,
though idea quiat simple
It might be good if in the world be more pure minded volition people
Hi Robert does the brushes wire be connected with the love wires on the motor
I love watching your videos!!! Is there a chance you could take these things you build and attach it to whatever you would actually use it for? I want to build some of these things but no idea what I would attach them to.
Thankyou for explanation and knowledge...great channel
Zen Zen said it perfectly !
You do great work, kudos!
Thank you very much!
Hi Rob, well explained and useful.
Do you have any comments with regard to voltage ranges for the Rotor / field coils when powered separately. I am keen to explore Low speed with High Torque.
Regards
Fred
Need reach a minimum of 600 rpm and voltage regulator, to count also more amps get absorbed by the batteries harder will be to spin the motor
Great explanation again
Love it Bob.
Keep em coming
cheers mate
You know the shaft on the motor is metal,would it be possible to tac weld a cog onto it or would the heat destroy it?
Idk if your tak will stick to the metal ,I think there is a key way or a setting screw to a flat face, and if it is round it might be easier to grind a flat face and use a setting screw, some times you use what you know will work,instead of over thinking it
@@tremail564 it had a grooved cog on to begin with where the belt went but I ground that off to put a universal joint onto it but the device I'm making with it requires it to have some pull on it an the universal joint keeps slipping off,I'm wondering if I tac it bit by bit allowing it to cool between tacs would it burn the grease in the bearings
It would be tricky, I can't say that it will work but if you can keep the heat off the bearing,sounds promising, if you could wrap a cold towel around the bottom side, and tac and check,well let us know what happens
Nice explanation. Thanks.
I hope your thumb is okay, did the screwdriver slipped? Thank you for the very interesting tips!
I am always cutting myself mate - barely even notice lol - but this was done pulling apart the washing machine to get the motor not on the motor itself
@@ThinkingandTinkering can I ask you question,please
Help me
@@ThinkingandTinkering oh yes, pretty much comprehensible! Firstly recognizing by the red stains everywhere. 😋
Me:
January, pulling apart my old dishwasher. -> Cutting myself several times (e.g. my knee...!) afterwards at the sharp edges of the inner stainless steel body.
February: PV on the roof needs aome repair. -> Cutting into the palm of my hand by handling a panel.
What will be next...? 😂
@@Gwydion67
I hope it's no more in Jesus name amen.
@@MM-np1sn
Dear friend
If you have a question for Robert Murray Smith you can find where he's replying in this thread below and direct the question directly to him. He also has a website and I suppose you could find the email for the website on his website and ask him privately through his email on his website.
You can also post the question here to Robert Murray Smith where you see Robert Murray Smith posting comments in this thread.
Also I believe if you post $10 to the private videos as a member, and ask him to direct you to which video has the information you need. All the members only videos have more information on what he's doing.
I get so many of these.
Cheers.
Can i use this with car alternator to power appliances in my home
See dif video that showed me how to use as a motor and I used battery of my drill and it span not fast but it worked but to use as a dc is class haha love ya work ma friend
Generator a ment to say not dc
Were/are you a science teacher/professor? You just have that vibe and knack for it!! I woulda never left class until we knocked out the school's electricity during an experiment and need to make a quick escape lol 😛
How do you make it to where you can run voltage regulation with one output power source. Inline speed controller?
hello mr. smith. great videos. i have been a fan for years now. I have a question. If a person has a permanent rotating device, can they put that on the generator and then connect a multi strip plug directly to the generator? or is something else needed?
Thanks for the video Robert I am always learning something new here on your channel keep up the great work man cheers :)
He says with lumps missing from his hands , a real video with blood sweat and tears
Thanks a lot, i appreciate this very much. 👏👏👏
So hows the wind turbine coming along?
Did you get 1 kw out of it yet?
Newbie question. Is it possible, when connecting as a generator, to require more torque to spin it by adjusting the voltage on the electro magnet? If it was connected to a small steam engine for example. They can also run away a bit.
Great video as always. 👍👍👍🇮🇪
Thank you! Cheers!
So I have a question that I think you could answer for me. I have a dc motor from a treadmill. One of the brushes was missing so I connected the brush wire to a paperclip just to see if the motor was still usable. So my question is what would cause the motor to spin faster if I took said paper clip and held it to the commentator then slowly moved it closer to the opposite brush. I was able to get 5x the speed by holding the clip about half an inch away from the brush while still applying same voltage as before. I hope I described this well enough for you to understand what I am asking. Only reason is if you can get 5x the speed from a motor then we wouldn't need nearly the size motors we use now to achieve same results, right?
Robert
Could you please do a video on the Fisher and Paykel washing machine motor converted to a wind turbine please. In particular the 36 coil version rewired to 6x6 coils and explain why you need to reduce the massive voltage down and increase Amps?
It seems to stay 3 phase and uses a bridge rectifier to output 13.5 volts to charge batteries for off grid application.Then run a wind experiment and show exactly how many amps/watts it outputs please. There are some absolute rubbish videos out there and it would make yours the Go To video for people like me that live off grid. Thanks 😊
I want to attach a similar motor to a go kart. What would be the best way to wire it? I would be using a pedal to control the speed. Do i need something inbetween the motor and pedal?
GREAT! I'm going to make a free energy machine out of one - I've just got one catch, the neighbours don't have any outdoor sockets 🤭
lol
Here in the U.S., we had a front loading, "new fangled", digitally controlled washer. I stripped the motor out for later use after repairs cost more than the machine was worth. After I got it apart, I looked at the label on the motor and it was rated at 1950 Hz and not at the 60 Hz in U.S. wall sockets. Without the digital controller, (the defective part,), the motor was useless.
If you energize the shaft coil independently with DC as a field magnet, the stator coil will generate a lot more power like a car alternator and will be much more controllable by varying the voltage to the field with a heavy rheostat or other electronic variable voltage regulator. This will probably produce AC voltage depending on how the coils are wound which is easily converted to DC with a diode bridge.
what kind of power will you get from a dc motor conversion ?
Great video. What if your washing machine is only 3 wires plus ground and is brushless (no external wires)?
Thanks!
what if there is a capacitor on the setup? I have two that have capacitors on the wiring
Great video Rob! :) Could the coils and rotor be fed from the same DC source with independently adjusted voltage for each and achieve similar results? or would doing so cause issues?
slow, no torque
Brilliant. Any idea how to find the power rating for different DC voltages? I presume it would be safe at 24 or 48V?
Sinclair C5 (with the washing machine motor) will be back in some form !!!
Robert how much torque can you get out of that motor? I am wondering if it would work for the electic who car you are building. I have a very similar project in mind but mine will require the electric motor run a 12gpm hydraulic pump from a case ingersoll 448 garden tractor which will provide 2500 psi IIRC. I have a few of those as donors and want to make an electric 4wd tractor out of two of them.
the reason the little car has stalled is because I need a motor and I can afford to buy one so this is a candidate for that - so - we are on the same wavelength here lol - the torque is going to be related to the current carrying capacity of the field coils and the number of turns in those coils - I am not sure what the wire gauge is so I can really estimate the amps it will carry and that makes it difficult to estimate the flux - so mostly what I will do is run it until it burns out - I have two so no worries there and find out what it will do - my standard approach when I am. not sure lol
@@ThinkingandTinkering if you monitor the thermal switch and shutdown when it trips the motor should be ok. I am considering finding two identical motors for my project and connecting the shafts together to form a higher torque motor. I have one of my case ingersoll 448 tractors running on a 10hp Chinese diesel I have used it for about 5 years like that around my farm but that motor is slightly smaller than I need for the pump it will stall under heavy loads. But your application should be lower torque as I have hydraulic losses.
@@ThinkingandTinkering oh I love that who inspired car by the way. John Pertwee would have definitely approved of a battery powered who mobile. After all if he had more batteries those bad guys wouldn't have gotten away before unit found his car...
That coffee ☕ is piping hot 🔥 🥵. I can see the steam coming of it.