Thank mate. It's funny I stumbled across your UA-cam channel today. I watched almost all your videos. Love your work mate. I really wish I had those 3d files for some of the aft section parts. Especially the cpt side rear bulkhead light housing. I will be installing the windscreen wipers tomorrow. Good job on you sim too mate.
I've been in a couple of these and this must be one of the most impressive ones I've seen! So cool to see your attention to every little detail. Well done and I hope you'll have many hours of pure fun in it!
Fantastic, I have no words to express how well the cabin of the B737 has turned out, wonderful, I love it and how much work has been put into that project, my goodness, I hope you can enjoy it for many years. Kind regards Jesus Garcia
Theres various suppliers, but I believe the cockpit he purchased is from Flight Deck Solutions. All the parts are sold separately. I would estimate anywhere from $60K-$100K+. Depends. Hope this helps!
May i please have the information on the screen and projectors? I am looking into building the same sim but don't have much luck with the screens and don't wanna use tvs. Thx
Wife is like what are you building a garage? Yeah to park my 737 in. Did you buy a real 737 simulator? I have seen them for sale that comes in sectional pieces like this.
Congratulations mate. You are going to love it. It comes together pretty good. Best piece of advice I can give you is to take tour time. Don't rush anything. Don't drill any holes unless you are adding something custom and you really need to. Before turning the power on, triple check 12v goes to 12v and 5v goes to 5v. And enjoy it. I enjoyed the experience of it
Melbourne 737 project Thank you kindly. I will be sure to check the voltages before firing everything up. As for the assembly process I will also be sure to be patience with it. My biggest fear was things not lining up as they should and being forced to drilled unnecessary holes. Anyhow stay safe and look forward to future videos. ~Mark
@@flightsim6948 I'm sorry mate but I don't want to disclose the price. If you would like to know prices of these components, you can send Peter Cos an email at flight deck solutions. He can supply enough information to you to give you an idea on what a project like this will cost you. Sorry mate, just can't answer that one.
Just awesome! One day I hope to get to that level in my sim!
Thank mate. It's funny I stumbled across your UA-cam channel today. I watched almost all your videos. Love your work mate. I really wish I had those 3d files for some of the aft section parts. Especially the cpt side rear bulkhead light housing.
I will be installing the windscreen wipers tomorrow.
Good job on you sim too mate.
great
I've been in a couple of these and this must be one of the most impressive ones I've seen!
So cool to see your attention to every little detail. Well done and I hope you'll have many hours of pure fun in it!
Amazing work gents
Thank you 🙌
Fantastic, I have no words to express how well the cabin of the B737 has turned out, wonderful, I love it and how much work has been put into that project, my goodness, I hope you can enjoy it for many years.
Kind regards
Jesus Garcia
The work is just crazy
absolutely fantastic, well done!
That's so cool!! Congratulations!!!
Fantastic work you've performed on it and it would be great to see if you put some hydraulics in the future to create some real inertia!
Just curious to where you bought the whole front section with the MID, MCU, FMC and glare shield, otherwise absolutely incredible
Awesome result - congratulations
"Become an AP: You can afford this" someone told me... how much does this cost?
Wonderful
amazing
with best wish👍
Is there a website where I can get this?
Wow very impressive!!
What if someone who's really terrible at building something like this, can you get some service like people build it for you?
How much does it cost all together and where did you get all of this equipment?
Theres various suppliers, but I believe the cockpit he purchased is from Flight Deck Solutions. All the parts are sold separately. I would estimate anywhere from $60K-$100K+. Depends. Hope this helps!
How much did it cost for you?
This is epic mate!!! You looking forward to the Microsoft Flight Simulator 2020 release?
Not yet. It's suitable for cockpit building yet. And interfacing hasn't been written yet. It will be a while before I fly 2020
This is very impressive mate. Can you post some videos with the Sim in action. Cheers.
Just impressive!!! How much money did you spend?
Congratulation! Very very great job! Bravissimo!
Final cost?
From whom are the linked yokes? really nice build by the way!
Where did you buy the cockpit?
how much did this cost, at least $30k if not more
This is not a home cockpit.
This is a cockpit home.
When can I visit?
For real
Video should be called "what to do when you have extra $150k laying around"
That would be my bed room lol
how much did everything cost
neat
Do you have one computer running all the visuals? What are the specs of the computer(s)?
私のMIPもFlight decksolucionsです。
最高ですよね。😃👍
May i please have the information on the screen and projectors? I am looking into building the same sim but don't have much luck with the screens and don't wanna use tvs. Thx
www.simulatorvisuals.com/
Visit this site mate. All the info you need.
Wife is like what are you building a garage? Yeah to park my 737 in. Did you buy a real 737 simulator? I have seen them for sale that comes in sectional pieces like this.
l wish this was mine
Awesome build. I just purchased my sim a few weeks ago from Peter at FDS. How would you rate the assembly process of everything?
Congratulations mate. You are going to love it. It comes together pretty good.
Best piece of advice I can give you is to take tour time. Don't rush anything. Don't drill any holes unless you are adding something custom and you really need to. Before turning the power on, triple check 12v goes to 12v and 5v goes to 5v.
And enjoy it. I enjoyed the experience of it
Melbourne 737 project Thank you kindly. I will be sure to check the voltages before firing everything up. As for the assembly process I will also be sure to be patience with it. My biggest fear was things not lining up as they should and being forced to drilled unnecessary holes. Anyhow stay safe and look forward to future videos.
~Mark
@@FlyWithRookie Welp this aged well, a year later and you two have some of the BEST setups/cockpits from home in aviation.
@@cozyz9147 That’s super funny. Thanks man. I admired Nathan’s build from day one and now I get the opportunity of enjoying a similar setup.
Where did u buy this? can i get a link?
Flight Deck Solutions 👍
Well, with a lot of money and nothing like that you can build ...
are you a real pilot
Unfortunately no mate.
This is why I went to this extreme into building a sim. Lol
If you would like to see more content have a look at my facebook page.
Melbourne 737 project
@@melbourne737project5 yeah i kinda thought so. also how much was this whole project
@@flightsim6948 I'm sorry mate but I don't want to disclose the price.
If you would like to know prices of these components, you can send Peter Cos an email at flight deck solutions. He can supply enough information to you to give you an idea on what a project like this will cost you.
Sorry mate, just can't answer that one.
@@melbourne737project5 your all good.
But it is not movable
Doesn't need to
@@melbourne737project5 why? I have home setup with good devices, and sometimes i go to movable 737-800. Absolutely different feelings