Hero XPulse 200 4V - 3rd Free Service importance in detail
Вставка
- Опубліковано 26 сер 2024
- Here is a detailed 3rd free service of Hero XPulse 200 4V which I have at Hero Maha Motors, Varthur, Bangalore.
Please go through the details of the technicalities why the 3rd Service is so important. Thanks 🙏
Very professional at work 😃👍👍
Yes, indeed 👍
Very nice sarvis
Thanks buddy, let me check if captions can help ❤
Hey Bro, Did he clean the centrifugal/rotor filter also? If he didn't then he did only half of the work....
I literally not noticed this, the service interval manual mentions the 3rd service needs to clean the centrifugal oil filter. Good catch.
@@automotriztechnica In Xpulse 200 4v, Centrifugal Filter and Screen Filter needs to be cleaned on every oil change i.e.Every 12000 kms.....
@@kumarutkarshnayak In third service oil change was done and they have replaced a washer for the drain plug. But yes, you are right on the Centrifugal Filter I did not see anything in the bill.
Good job
Thank you so much ❤
After 1st service oil change
when we have to top up the oil ?
On 5k kms or 6k kms ?
In second service they check it. But keep a watch on oil level every 3K-5K Km.
Hey , how come u got ur vehicle 3rd serviced at only 657kms , on that kms the vehicle needs to get 1st service
I have ridden the vehicle less, and time for 3rd Service had come after approximately 8 months and it was another 20 days had left for 3rd Service. Did the service mainly to remove the metal residual due to friction that happens during running in period for any new engine.
Also, after opening the clutch case I have to top up new oil. Just peace of mind 💐
What are the things to care in 1 st servicing? I am a new buyer
In first service, change oil, should be synthetic only. Oil filter mesh needs to be cleaned as it will have metal debris at first oil change. Also, tell them if anything is loose or for any parts that needs replacement. Check clutch clearance and chain etc.
Get an additional seat cover ribbed if you want and any accessories like handlebar raisers that’s just for convenience
Sir in lower side near side stand there is a empty hoel in my xpluse In your bike are same please check
Is that a side stand foot or near the joint of side stand where it is bolted to chassis?
@@automotriztechnica bolt to chassis
@@abhishekkulkarni1496 Will check and update you
@@automotriztechnica okk thanks u
@@abhishekkulkarni1496 I just checked, the side stand does not have an extra hole or anywhere seen where it’s bolted. But some 2 numbers may be 66 roughly is punched heavily
Gasket not change
Absolutely right; I had asked, mentioned gasket is good. I’m not sure if Hero mandated it. Need to re-check the manual. Thank you for the advice and comment 💐
Stop getting that filthy cloth over everything!
@@jacquesw3086 I didn’t get your point, can you please elaborate more on this? Thanks