Seriously thank you so much. This really helped me. Electricity isn’t something I have any experience with, so people like you help me through “easy” projects.
Just make sure you don't install the clamp BACKWARDS like he did in the vid. Compare the orientation at 2:39 and 4:14. Those screws are supposed to be securing the clamp to the metal flex pipe.
Make sure terminal connections are tight or they will form a bad connection and burn up under high load.. Always use a the proper strain protection fitting where the cord enters the appliance otherwise the sharp edged metal "will" cut into the supply cord insulation every time the appliance is moved, leading to a impressive high current short circuit behind your stove when you go to slide it out ..
Thank you for this video, very helpful. Do you remember the brand of the oven you used? It has space and a cut out in its back. That is the type we need because the old box is in the way so this one would fit perfectly, thank you.
Great video! I wanted to ask a question I thought this is about the smaller stove like I have it's a two-burner electric camping range. The wires came undone and I don't know where they go. Can you tell me send me a schematic help me something it's only thing I have to cook on right now at home. Thank you so much
Thank you so much for the video , I have DBL wall oven GE JT 3500 SF 5SS , recently after long 1.5 hrr for the turkey , the oven did not go up over 100 f , we just found out the junction box the connectors all burn out but breakers 2 40 amps did not trip . Out appliance repair reconnect the 4 nuts , 2 hots , 1 N 1 G , but the wires to the oven did not get changes . I suspect this is a 10 gauge but not sure , since they are smaller than the ones coming from the wall. At this time the breakers have been turned off and I am afraid to use the DBL oven, Any suggestion to replace the conduit from junction box to oven connection. All will be done by professional installation , just my idea before I call them . Thanks Sam DC
The play I purchased all wires are grey ,also back of stove has 3 nuts left nit red orange purple wires middle nut 2 wht wires right nut 4 black wires off to the side 4th nut 1 wht wires ?where do my 3 grey wires go only middle wire has writing on it how do I know what wire goes left and what wire goes right ?
"turn off the breaker for the range because the last thing you want is to DIE, before you get that HOT MEAL, especially if its a CLEAR SUNNY DAY" lolololololololol
So I bought a new range and cord and have watched several videos and thought easy but the question I have is the wires on stove are held on with nuts and I have 4 separate nuts so do I leave those nuts on which would separate the connectors on my new power cord from the connector on the stove?
Brother I Love Your your heart to help others. However I have to say that the snap- in ngle connector you used is not the right way as you used it up side down . Best of all to you an great you are trying your best.
Thank you so much!!!😃 And I got a question about installing a 3 prong wire. Is there a difference between a dryer wire and a stove wire for a 3 prong? Like would it be safe?
Each heating element has two terminals: one for hot and second for neutral wire.Then how two hot wires each 120 volts are connected to the element.please clear my doubt.
Seriously thank you so much. This really helped me. Electricity isn’t something I have any experience with, so people like you help me through “easy” projects.
bro I hear you, even though I am a pipefitter here I sit because even a plug and play electric connection leaves me lost
Clear instructions with no bull. Blocked up the oven perfectly. Thank you!
Thank you! This video was perfect. I just changed out a 3 prong to a 4 prong for the first time!
This was a very easy to understand video, for a DYI person I can't thank you enoug.
Glad it helped😊👍💪❤
Thank you for easy to understand.BEST on putting removed nit back on empty screw so it does not get LOST! That saves✅
Great instructions. I like your dry humor. 😂🤣😂🤣😂
Thanks man you saved me finding an electrician out!
Oh man, you are my savior. Thanks a lot
Good video, straight to the point.
thanks 😊👍
LOL I really don’t wanna die before I get ready to eat. Thanks
Excellent video. Very helpful. And a great comedy show to boot!
Thank you this video 📹 help me out a lot I would never done it without you thank you again
Glad I could help
Just make sure you don't install the clamp BACKWARDS like he did in the vid. Compare the orientation at 2:39 and 4:14. Those screws are supposed to be securing the clamp to the metal flex pipe.
Great Video! Thanks!
Glad you liked it!
Thank you for making it easy, thumbs up!
Well done. Thank you.
Whipple
Make sure terminal connections are tight or they will form a bad connection and burn up under high load.. Always use a the proper strain protection fitting where the cord enters the appliance otherwise the sharp edged metal "will" cut into the supply cord insulation every time the appliance is moved, leading to a impressive high current short circuit behind your stove when you go to slide it out ..
What if the new stove is 4 prong an old stove is 3-prong how do I hook up 3-prong to a 4 prong to work in the wall
Fantastic!
Great comments and was truly funny. Thanks
Thank you for this video, very helpful. Do you remember the brand of the oven you used? It has space and a cut out in its back. That is the type we need because the old box is in the way so this one would fit perfectly, thank you.
Great video! I wanted to ask a question I thought this is about the smaller stove like I have it's a two-burner electric camping range. The wires came undone and I don't know where they go. Can you tell me send me a schematic help me something it's only thing I have to cook on right now at home. Thank you so much
"the last thing you want is to die on a sunny day." right on, bother, I got the circuit breaker off!
Las explicacion k vi en este videi fue muy intrutiva gracias por tu explicacion
gracias👍😊❤
awesome video. even had me laughing with those dad jokes
Omg this was great !!! ty you so much but how did you know where the ground wire went on the new stove ?
Thank you so much for the video , I have DBL wall oven GE JT 3500 SF 5SS , recently after long 1.5 hrr for the turkey , the oven did not go up over 100 f , we just found out the junction box the connectors all burn out but breakers 2 40 amps did not trip . Out appliance repair reconnect the 4 nuts , 2 hots , 1 N 1 G , but the wires to the oven did not get changes . I suspect this is a 10 gauge but not sure , since they are smaller than the ones coming from the wall. At this time the breakers have been turned off and I am afraid to use the DBL oven, Any suggestion to replace the conduit from junction box to oven connection. All will be done by professional installation , just my idea before I call them . Thanks Sam DC
So why did you not remove the ground strap from the neutral wire in the 4 wire cord? Did you want to shock your customer?
this video is awesome
The play I purchased all wires are grey ,also back of stove has 3 nuts left nit red orange purple wires middle nut 2 wht wires right nut 4 black wires off to the side 4th nut 1 wht wires ?where do my 3 grey wires go only middle wire has writing on it how do I know what wire goes left and what wire goes right ?
Where can I get ground wire screw from my stove didn't have it
Thanks!
"The only smell of meat..." Haha
🤣😂👍
Do you have a link for the electrical probe used to test the lines?
Thank you for help my friend
Very good! Thanks!!!
Thank you! I am trying this tomorrow after I watch the video several times. The electrician never showed up.
Really
I want to ir to
Thank you so much
You're most welcome
"turn off the breaker for the range because the last thing you want is to DIE, before you get that HOT MEAL, especially if its a CLEAR SUNNY DAY" lolololololololol
Lol
Man .....you install the cable connector backwards ....
Did he really
Tires are what if the wires are not color coded that you are attaching to your stove how do you tell what is hot
So I bought a new range and cord and have watched several videos and thought easy but the question I have is the wires on stove are held on with nuts and I have 4 separate nuts so do I leave those nuts on which would separate the connectors on my new power cord from the connector on the stove?
Nicely done thanx
I got a 3 pronge stove and a 4 pronge outlet wat do I have to do
Is 3 prong worse than 4 prong as the 3 prong has the neutral and ground together? I just bought electric range and they gave me a 3 prong cord with it
At 3:52, you put the connector in backward!
Very Good!... #73 ✝ {8-20-2022}
You’re awesome!! 🤣
Brother I Love Your your heart to help others. However I have to say that the snap- in ngle connector you used is not the right way as you used it up side down .
Best of all to you an great you are trying your best.
you gave me a laugh, good video.
Thank you so much!!!😃 And I got a question about installing a 3 prong wire. Is there a difference between a dryer wire and a stove wire for a 3 prong? Like would it be safe?
Amps (less amps than stoves) and the shape of receptacle and plugs different
Informative and funky. Love it!!
Thank you!
Yeah what he said you got to put it in and take it off put it in writing or you ain't no pleasure that woman
Anybody else notice that at the end when he was putting the cover back on, there was no wire to the stove? Fun and informative video otherwise.
Thank you so much 👌
What if my burners work but the clock and oven part does not
Great video but you didn't say which orientation the 3 wire go in relation to the plug. My oven cable has no colors.
If it's three wires, leave the ground connected to where it is, then it doesn't matter the orientation as long as the middle one is... in the middle.
Each heating element has two terminals: one for hot and second for neutral wire.Then how two hot wires each 120 volts are connected to the element.please clear my doubt.
هل توصلت إلى جواب
أنا بحاجة للإجابة على هذا السؤال
Soooooo that right angle connector is installed incorrectly
Nicely done, man!
It’s easier to just pop the clip off th a flat head .takes ten seconds and if done right won’t damage it
What if you don’t have colored wires. My wires are grey.
Thats a lot of going ahead.
"Barbecue paper' Lol!
Voltage probes dont read through bx.
Wire connector is not installed correct.
What are the thumbs down for?
“The only smell of meat that we want is the one in the oven”!
That was my favorite part!!! So freaking funny!!!
He said nuts
When connecting to the new stove he used the BX connector in a way that I've never seen it done. Totally unacceptable
Upside down!
Called Jerry rigging
🤠👍🏻👍🏻👍🏻👍🏻👊🐯👊👍🏻👍🏻👍🏻👍🏻🤠
Great but can live without the annoying music
To much racket and taking to long turning screws...
Mine didn't come with a clamp
Try electric screwdriver. Just saying
Great video terrible music
You said nothing about “hard wiring”!
ADS SUCK!!!!!!