Thanks for still loving this rare Proton I bought cheap from a salvage auction! If you haven’t watched the first video, you can click this to watch that too: ua-cam.com/video/3N9gt5OXKEM/v-deo.htmlsi=AhtfC0rE6cEI_fH2
In my mind, still one of the best looking little 3 door hatches that nobody knows about. It's great to see it getting so much love on the channel too. Mine used to run a bit lumpy when cold too and it turned out to be a coil pack issue. Hope you do keep it and it'll be interesting to see what the MOT discovers. There was a special edition in this colour and with those wheels called the Spectrum so i wonder if that's what yours is. Jerry again being a legend who never seems phased by the work a car needs.
@@alansimpson835 thanks again Alan you and others seems to be loving this little car! Yes someone told me about a Spectrum edition, don’t think mine is as nothing on the logbook saying so…so I doubt it…
First time I have watchedyou. What a great video! You have a very clear and informative style of presentation. Loving the Proton, a good looking modern car. I will be watching more.
@@Driven247 top tips from what i do know about them, rust is always a huge issue on these cars - behind the bumpers the chassis rails crash bar and that will show huge signs of rust, the rear hatch always has rust behind the plastic number plate holders, take the rear lights out and check for rust inside and behind the rear lights, and they look amazing with the angel eyes head lights , the windscreen is always prone to rust bubbles! And the tappets can always be noisy on these cars until they get a full amount of oil in them.
Good to hear that you've kept the original plates. You can get new plates made as exact copies of the original ones to keep the original look, which will be good for shows.
Having worked at a few motor factors I managed to get some of the old catalouges etc & also do a bit of cross referances on a certain auction website & get my Fiesta parts dirt cheap
Thank you, he’s always wary of engine “cleaning” though, water and engines don’t mix well sometimes, we recently found that out but said car is ok now…can’t wait to clean it up yes, for sure!
Really enjoyed the video. Looks like a cracking little car. Few rust spots I spotted around the rear window that need sorting. One question. How big a turbo can you fit in the engine bay? 😁
Thanks Paul, kind words. Yes, few spots of rust on the roof too…solution I reckon, sand roof ones down, then roof wrap? As for rear window rust, assume window out job? Not sure! I assume it wouldn’t just be a turbo, surely more engine mods would be needed? Thanks Paul.
@@Driven247 not sure how much it would cost, but vinyl wrap the whole car in something like Galaxy wrap. It looks like a galaxy with all the stars etc.
I bet there aren't many of those left now - Protons were always underrated machines in my opinion. Yeah, these are based on old Mitsubishi models handed on to Malaysia to get their motor industry going, but I remember when the Satria GTI appeared. Now that was a head-turner and a proper hot hatch - I'm not really into those types of cars generally, but I would definitely have one of those in a heartbeat!
No, I think under 10 of these models on the road…I also owned the GTI once briefly too, that’s on my channel a few years back. It’s a shame Protons aren’t worth the money, for example if that’s was an old Honda civic, it would be. A few people saying how reliable these cars should be etc too! Thanks for watching.
Thank you. Unfortunately I am not sure I can only assume owned by an elderly owner who passed and family got rid of the car…due to the lack of miles suggests not used much and potentially owned by elderly person…would love to know the exact reason! Thanks for watching, more to come shortly!
Yes it might of had the oil drained out being ready for scraped you should of noticed the oil light when you started it good job you didn't run it for long I'm sure wat ever it needs for a mot your dad will sort its easy to do the cambelt on it but the exhaust sounds like its blowing I would do the fuel filter and clean the plugs as well before you take it for MOT a little you should haven't many problems hopefully
Thanks Peter...don't think an oil light came on though...but I am glad I did check it, good idea on fuel filter too, may do that also then, I did think of it but yeah. Thanks for the advice.
@@WauliePaulnuts246 thanks, been doing it for year, love UA-cam and big love for all cars to be honest, I’ve owned quite a few and a few rare ones too! I’m UK, down South, yourself?
@@Driven247 I had them in my Mitsubishi colt and Lancer and my Proton 1.3 concept and 1.5 Proton Emerald. The Mitsubishis and the Colts are basically the same cars . There's a Top gear clip of them racing the Protons against some Australians . Also I have had over 50 cars in my lifetime and those four I mention were easily among the most reliable non of them ever left me stranded . One last thing you can get a GTI Satria although it's very rare now
@@chriswalford9228 interesting stuff Chris. If you find some of my older videos, I bought a GTI cheap and it was a very rare Silverstone edition which I now wish I hadn’t sold but yeah…thanks for watching!
Jon Coupland is looking at buying a Satria on his channel, not as nice as this specimen tho, I'm loving this, especially so in this colour and condition. I'm admittedly a bit odd as I love the whole Proton uk range along with older Skoda Felicias, Favorits, Nissan K10 &K11 micras. So you're stuck with me for this series!😂
Yes, seen his collection. Mines clean, but needs to be cleaned literally, holding the engine scrubs up well too! I recently saw someone else purchase a car same to mine, same mileage, colour, spec, very clean car, want mine to be the same ha ha! Yeah, I like rare odd cars too. Owned a few and most are on this channel in videos. Thanks for watching, trying to film weekly videos on this car. Thanks again.
You're not alone - I've had a fascination with the older Protons for years. Owned a really nice Wira 1.5 a few years back, and always fancied one of those Satria GTI things to wind up the Fiesta and Corsa fans!
@@Driven247 If you are looking for spare parts you can try searching online from Malaysia...we still have a third party company that still manufactures all spare parts
The reason why people do like Protons l do and l live in Australia and there are a couple of you tubers who have them and l do see a couple of Protons and infact there is a local car yard with a Proton Jumbuck for sale and there are a couple of Proton Jumbucks driving around and that's good that your Proton shares a lot of parts with other vendors as l myself own a 1097 Toyota Hilux and it shares a lot of parts with other vehicles and l have had to get a lot of parts because some of them were 27 years old
@@Driven247 not a problem was interesting watching I don’t suppose you’ve ever heard of a perodua nippa have you ? I’ve had one of those sat in my field for the last 7 years that would be interesting for someone to get running
@@Driven247 sorry don’t know if you got the previous comment or not drop me an email on jb-motors@outlook.com I’ll send you the pictures and details and anything else you want to know
Yeah, tried to flip a car on UA-cam before, as in, honest with how much I paid for car, how it sold and what I made, got a few nasty comments like your not allowed to sell a car for profit etc although loads of UA-camrs do it! Thanks though Jamie!
@@Driven247id do all that behind the scenes, just sell them and introduce the next project each time. And just document each car, keep the figures to yourself 👍🏻
Thanks for still loving this rare Proton I bought cheap from a salvage auction!
If you haven’t watched the first video, you can click this to watch that too: ua-cam.com/video/3N9gt5OXKEM/v-deo.htmlsi=AhtfC0rE6cEI_fH2
In my mind, still one of the best looking little 3 door hatches that nobody knows about. It's great to see it getting so much love on the channel too. Mine used to run a bit lumpy when cold too and it turned out to be a coil pack issue. Hope you do keep it and it'll be interesting to see what the MOT discovers.
There was a special edition in this colour and with those wheels called the Spectrum so i wonder if that's what yours is.
Jerry again being a legend who never seems phased by the work a car needs.
@@alansimpson835 thanks again Alan you and others seems to be loving this little car!
Yes someone told me about a Spectrum edition, don’t think mine is as nothing on the logbook saying so…so I doubt it…
First time I have watchedyou. What a great video! You have a very clear and informative style of presentation. Loving the Proton, a good looking modern car. I will be watching more.
@@andrevassili1039 thank you, kind words. Check out the first video I did on this car also…more to come!
@@Driven247 I did, it was great. You are a refreshing change, can't wait for the next one.
I am really enjoying watching the Proton videos! Make sure you keep this one!
Thanks Robert, more to come shortly!
Looks like a Mitsubishi mirage/colt with a Proton badge
Very similar cars so probably why lol. Thanks for watching! More to come.
What fantastic energy
@@LovingAllLife thanks, I’m very passionate about cars you see! Thanks for watching and more to come
Being a Norwich boy.... It's great to see a proton getting resurrected! 💯🙌🏽
Thanks a lot Ben and thanks for watching, she shall live again!
Very rare colour for a proton will be watching this as I have a lotus proton that needs some tlc
Do you? The GTI? I use to have one, very good cars! Thanks for watching, more to come.
@@Driven247 top tips from what i do know about them, rust is always a huge issue on these cars - behind the bumpers the chassis rails crash bar and that will show huge signs of rust, the rear hatch always has rust behind the plastic number plate holders, take the rear lights out and check for rust inside and behind the rear lights, and they look amazing with the angel eyes head lights , the windscreen is always prone to rust bubbles! And the tappets can always be noisy on these cars until they get a full amount of oil in them.
Thanks Ambers Dad. :)
And (as a regional resident holder) it's great to hear some awesome regional accent action. :)
Regional? You from Dorset too? Lol. Thanks for watching.
@@Driven247 Naaaaaarfook for me. Similar... Dorset is what people end up sounding like when they try True Norfolk.
@@Ratty_Rex ha ha, you have confused me with that one!
Thanks for sharing your new project! Good luck with everything!
Hello you! Thanks for watching Anime.
The oil filter will need some 😊
Need some what?
Good to hear that you've kept the original plates. You can get new plates made as exact copies of the original ones to keep the original look, which will be good for shows.
Yeah you can o mine can’t you? Thanks for watching.
Great to watch this one
Always great adding new parts to a car.
It looks like a nice car, Amber. You and Jerry are doing a great job :)
Thank you and thanks for watching!
Having worked at a few motor factors I managed to get some of the old catalouges etc & also do a bit of cross referances on a certain auction website & get my Fiesta parts dirt cheap
Exactly, thats the correct wording, cross reference! After some digging, they found me the correct parts!
Thanks Nick.
@@Driven247ebay is great for cross referencing part numbers even if you are not buying from there
Cracking little project Amber, watching with interest!
Thank you, hope your well!
Good job great to see a Proton, my dad has a Persona I'm lucky enough to drive it regularly lot more interesting than a modern car!
@@scottmcghee2246 thank you Scott, can’t wait to drive mine! More to come.
Enjoyed this video. Well done to jerry as always. I bet martin cant wait to get stuck into cleaning that engine bay😂. 👌
Thank you, he’s always wary of engine “cleaning” though, water and engines don’t mix well sometimes, we recently found that out but said car is ok now…can’t wait to clean it up yes, for sure!
@Driven247 Yeah, thats true. Silly me. Lol. Also. Enjoyed the live stream, i went back and watched the last bit i missed. 😁
@@MrHappyraver noo, not you being silly at all, but it shall get cleaned and aw thanks!
Satria was basically a Mitsubishi lancer mirage in Australia and we had them where quite reliable cars
Thanks Trevor, good facts there lol!
That's a nice car! I've never seen this model of PROTON before!
Thanks Nygel. I use to also own the GTI version, a proper hot hatch version of the Satria.
Thanks for watching.
@@Driven247 - that was supposed to be a pretty decent hot hatch. A hidden gem
@@mattylamb9194 the GTI with the Lotus handling was epic!
Thanks Jerry! 👍👍😎🇺🇸
And thank YOU for watching.
Great watch Amber glad you're doing good 👍 I'm still loving my low mileage W202 C200 btw 👍
Thanks Aaron and that’s good to hear, beaut cars!
Really enjoyed the video. Looks like a cracking little car.
Few rust spots I spotted around the rear window that need sorting.
One question. How big a turbo can you fit in the engine bay? 😁
Thanks Paul, kind words.
Yes, few spots of rust on the roof too…solution I reckon, sand roof ones down, then roof wrap?
As for rear window rust, assume window out job? Not sure!
I assume it wouldn’t just be a turbo, surely more engine mods would be needed? Thanks Paul.
@@Driven247 not sure how much it would cost, but vinyl wrap the whole car in something like Galaxy wrap. It looks like a galaxy with all the stars etc.
@@paulcullen814 probably like £2k! Wrapping isn’t cheap, ah!
I bet there aren't many of those left now - Protons were always underrated machines in my opinion. Yeah, these are based on old Mitsubishi models handed on to Malaysia to get their motor industry going, but I remember when the Satria GTI appeared. Now that was a head-turner and a proper hot hatch - I'm not really into those types of cars generally, but I would definitely have one of those in a heartbeat!
No, I think under 10 of these models on the road…I also owned the GTI once briefly too, that’s on my channel a few years back.
It’s a shame Protons aren’t worth the money, for example if that’s was an old Honda civic, it would be.
A few people saying how reliable these cars should be etc too!
Thanks for watching.
Thanks Jerry, your a legend :D
Nice one, thanks Jason!
I love this car Amber 😊👌
A few people do it seems, which is nice to see! Thanks.
Was the oil below the halfway mark after the oil change?
A little yes, but my Dad told me to keep an eye, so will top it up once I know it’s gone around the engine a bit as such. Thanks for watching.
It's had some love & attention with help from dad Jerry
Money from me, mechanical fixing by Dad, good combo! Thanks Nick.
Looks like a great car even with the few issues it has.. Any idea why it was sent to the scap yard ? Or didn't i miss you you talking about that.
Thank you. Unfortunately I am not sure I can only assume owned by an elderly owner who passed and family got rid of the car…due to the lack of miles suggests not used much and potentially owned by elderly person…would love to know the exact reason!
Thanks for watching, more to come shortly!
very nice car indeed...well done❤
Thank you very kind and more to come!
Yes it might of had the oil drained out being ready for scraped you should of noticed the oil light when you started it good job you didn't run it for long I'm sure wat ever it needs for a mot your dad will sort its easy to do the cambelt on it but the exhaust sounds like its blowing I would do the fuel filter and clean the plugs as well before you take it for MOT a little you should haven't many problems hopefully
Thanks Peter...don't think an oil light came on though...but I am glad I did check it, good idea on fuel filter too, may do that also then, I did think of it but yeah. Thanks for the advice.
Did you get your part's proton at codworth Barnsley south Yorkshire 😊
No, got them from my work which I did mention in the video, I work at a motor factors. Thanks for watching Rob.
keep it its a really nice car
Thank you Justin, thanks for watching too.
Looking at that timing belt I would change it right away before I ran the engine anymore
Thanks Mark, it’s only cheap, will need my Dad to do it though. Thanks for watching.
@@Driven247 Won't be cheap if it breaks. That would be the end for that engine.
@@matthewjenkins1161 hence why we decided to check the condition of the cambelt and I have a price for it…I don’t want it to break!
Fix it up and drive it, reckon it will make a good commuter for somebody.
Exactly Will and I will keep hold of it for a bit myself.
Excellent video 😊 ❤.
Thank you.
Good save! Great project enjoy it. New sub 👍
Thank you! Check out the first video I did on this car if you haven't already...
@@Driven247 will do just came across your channel 😃 I'm after another project car once I get rid of 2 90s motorbikes 🤣
@@WauliePaulnuts246 sounds like a plan. Thanks for stopping by and watching my videos!
@@Driven247 hope the channel goes well. Where are you based?
@@WauliePaulnuts246 thanks, been doing it for year, love UA-cam and big love for all cars to be honest, I’ve owned quite a few and a few rare ones too! I’m UK, down South, yourself?
I really enjoyed this Video. The Car looks a lot better. Well done.🧸
Thanks as always Jamie.
@@Driven247 You are very welcome. 🧸
Great engine those Magmas
@@chriswalford9228 ah good, thanks Chris.
@@Driven247 I had them in my Mitsubishi colt and Lancer and my Proton 1.3 concept and 1.5 Proton Emerald. The Mitsubishis and the Colts are basically the same cars . There's a Top gear clip of them racing the Protons against some Australians . Also I have had over 50 cars in my lifetime and those four I mention were easily among the most reliable non of them ever left me stranded . One last thing you can get a GTI Satria although it's very rare now
@@chriswalford9228 interesting stuff Chris. If you find some of my older videos, I bought a GTI cheap and it was a very rare Silverstone edition which I now wish I hadn’t sold but yeah…thanks for watching!
Jon Coupland is looking at buying a Satria on his channel, not as nice as this specimen tho, I'm loving this, especially so in this colour and condition.
I'm admittedly a bit odd as I love the whole Proton uk range along with older Skoda Felicias, Favorits, Nissan K10 &K11 micras.
So you're stuck with me for this series!😂
Yes, seen his collection. Mines clean, but needs to be cleaned literally, holding the engine scrubs up well too!
I recently saw someone else purchase a car same to mine, same mileage, colour, spec, very clean car, want mine to be the same ha ha!
Yeah, I like rare odd cars too. Owned a few and most are on this channel in videos.
Thanks for watching, trying to film weekly videos on this car.
Thanks again.
You're not alone - I've had a fascination with the older Protons for years. Owned a really nice Wira 1.5 a few years back, and always fancied one of those Satria GTI things to wind up the Fiesta and Corsa fans!
What is the capacity of the engine?
She’s a 1.3, check out the first video I did on this car for more info, upload before this one, thanks.
@@Driven247 sorry, i wasn't realize that 😅...btw im from Malaysia and I own a Proton Satria 1.3 GLI
@@syahirnizal6284 that’s ok and really? That’s cool!
@@Driven247 If you are looking for spare parts you can try searching online from Malaysia...we still have a third party company that still manufactures all spare parts
@@syahirnizal6284 handy to know thank you.
New subscriber here. Great video!!
Thank you very much, more to come and if you haven’t already, check out the first video I did on this car too!
I haven't seen a Satria for ages.
I’m glad you have now! Ha ha. Thanks for watching.
Safety first. You should always have the car on the flat section at the top of the ramps.
@@philtowle4683 oh dear, my Dad should have known better eh?
The reason why people do like Protons l do and l live in Australia and there are a couple of you tubers who have them and l do see a couple of Protons and infact there is a local car yard with a Proton Jumbuck for sale and there are a couple of Proton Jumbucks driving around and that's good that your Proton shares a lot of parts with other vendors as l myself own a 1097 Toyota Hilux and it shares a lot of parts with other vehicles and l have had to get a lot of parts because some of them were 27 years old
@@lesklower7281 very interesting stuff again from you so thank you for your comment!
Its thats proton satria
@@Neko_Chan282 sure is.
Don’t worry about the chin I hadn’t even noticed that bit 😍
@@pug2052 thankfully it’s gone now, wasn’t a good look ha ha. Thanks for watching.
@@Driven247 not a problem was interesting watching I don’t suppose you’ve ever heard of a perodua nippa have you ? I’ve had one of those sat in my field for the last 7 years that would be interesting for someone to get running
@@pug2052 OMG! I’ve been looking for one as it was my first car, my Nans hand me down who is no longer with us! Where are you based?
@@Driven247 sorry don’t know if you got the previous comment or not drop me an email on jb-motors@outlook.com I’ll send you the pictures and details and anything else you want to know
@@Driven247 pm me
I REALLY ENJOY WATCHING A SAVVY WOMEN ,INTO MECHANICS
MAYBE OF INTEREST ,BUT PERSONALLY I SWEAR BY USING SLICK50 IN THE ENGINE ON OLDER CARS,,ITS ALWAY HELD ME IN GOOD STED
@@DavidWebb-m8l thanks for stopping by, I do like to try and do things myself occasionally…and thanks for that tip!
You could do a 'proton to biposto' series where you buy and flip cars until you have enough to purchase a 695 biposto. 🎉🤘
Yeah, tried to flip a car on UA-cam before, as in, honest with how much I paid for car, how it sold and what I made, got a few nasty comments like your not allowed to sell a car for profit etc although loads of UA-camrs do it! Thanks though Jamie!
@@Driven247id do all that behind the scenes, just sell them and introduce the next project each time. And just document each car, keep the figures to yourself 👍🏻
I am a malaysian, why...why...in d name of god u bought old bangers car....
I thought you would like it seeing the car is from your home country? You don’t like it?
@@Driven247 hahaha....u should get the SATRIA GTI 1.8
@@shahwirashahwira9751 I did have one before a few years back, very good car!