Nissan 350Z / Infiniti G35 BackUp / Reverse Camera Installation | AnthonyJ350
Вставка
- Опубліковано 28 бер 2019
- Have a hard time seeing out of the back of the NIssan 350Z? In this video we go over the basics to installing a backup/ reverse camera in a Nissan 350Z.
We show a way to get into the vehicle without removing the bumper shell and where to make your connections inside the car so your installation will last longer. We also go over where to run the wire to make life easier and keep the wiring clean.
#Nissan #350Z #BackUpCamera
Subscribe for more automative tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
T-Shirt: teespring.com/en-GB/AnthonyJ3...
Music available - www.jinglepunks.com & www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Nissan 350Z / Infiniti G35 BackUp / Reverse Camera Installation | AnthonyJ350
• Nissan 350Z / Infiniti...
ANTHONYJ350
/ anthonyj350 - Авто та транспорт
Anthony, I just have to say I’ve had my 350z for 9 years now and nearly everything I’ve done I’ve always watched your videos. Even when I’m using the garage computer and Google something 350z I see you in the results and always click. You always are very informative and show exactly what needs to be done. I just want to thank you from one Z guy to another. You’re a legend
Oh thank you so much for the kind words. It actually means a lot. Do you want some free stickers? Email your mailing address to info@gofasthavefun.ca
Best camera installation video for 350Z thus far!
Thanks!
what's up man. I did the same thing splicing a signal wire to my reverse light harness. Always good to see your ingenuity at work AJ.
Hey Thizz! Thanks, we're always trying to refine our installs plus make them faster
Hey bro its Hex from RJM Performance, I'm glad you did this video, I've ran backup cams in other vehicles and it was a serious hassle mostly just the wiring running through the whole vehicle, I even tried remote backup (worked for a week) and had massive feedback. I was curious to see what you did with the Z mines the convertible and I looked not to long ago and also has grommets can feed wire into.... jus gonna wait to do it as I'm gonna put 2 cams back there, 1 for the backup on my deck, and the other for electronics mirror which will run all the time to have front and rear cams. Thanks for the vid man, would love to see more Z stuff :)
Hey Hex, thanks for watching! There will be more Z content coming. I have some stuff coming in from Z1.
Nice install, wire run looks good.
Thank you! Try to keep things tidy, durable and serviceable.
Finding that green wire in the loom was clutch! I dont have to tap into the reverse lamp in the bumper🙌.
Glad it helped you!
You know what you are doing man! I wish you were closer to Montréal. :)
Thanks for watching and noticing the details! 🙂
You should start your own school on how do installations, I mean that. People where I'm from, break shit all the time. Nice work bro
Haha, I dont know if I'm that good
Maybe the shops can just watch some of my videos :p
@@AnthonyJ350 believe in yourself bro teach people how to do it on your channel you never know if your good with electricity or you love doing it you’ll get good at it if your not already
@@walidshahin2856 I'm ok at it, if you look at all my previous videos.
Noticed those were BC plates.
Was wondering if u know any one local or atleast in canada that does the instrument cluster repair on z350’s/G35’s
Good stuff thanks, out of curiosity I got a 05 convertible. I got water on lower passenger side of door panel, any idea? By speaker area
Are there drain tubes in the convertibles?
Very informative video, I am copying some of your other modifications on my car. You explained everything clearly but I had a question about the red wire that gets connected to the reverse gear signal from the DVD player. Can I test that connection with a 12 volt test light or do I need a multimeter?
You could use the light, but a multimeter would be better.
@@AnthonyJ350 Thanks
Can you add links for the camera you used? Also the other camera model similar to the GTR you mentioned.
Thanks! Great video
There's this camera I use on my own car www.ebay.com/itm/144026049906?hash=item21889f1d72:g:dQIAAOSwQ3tgjU6y&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5337982243&customid=&toolid=10001&mkevt=1
Random question here.. Do you happen to know the differences between the vq35hr engine with regards to the vin? VIN B vs VIN A?
I happen to have "VIN B" car vq35hr 2008 nismo and I am doing a replacement (rod went thru the side of the block)
I see listings with engines that say "VIN A" or "VIN B" and Im not to familiar with the differences with regards to 350z engine stuff, Im aware that they're both vq35hr's but not sure if the is a major difference.
Any help or guidance would be greatly appreciated, love the channel btw!
That I'm not sure, I would call the dealership that one, or post the question on my350Z.com.
Awesome video and very informative. After install, when reverse is engaged the monitor switched to a black screen without any error message. What could be the problem. Thanks for your help.
How is the camera hooked up to power and ground? Are the plugs on the camera tight? Is the camera plugged into the reverse camera input of the head unit?
Hi, I have the camera hooked to power, I have verified that the video cable is connected, and also connect the power wire to the reverse wire at the hu. I swapped out the camera with another camera and still same problem. The screen switches when reverse is engaged but no image.
@@miketrinh9468 Did you use a relay like I did?
No relay.. I ran the ground to the ground on the harness instead of a dedicated ground.. Could a poor ground cause this issue.. I assumed if the ground is bad, it wouldn't switch over when revered, correct?
That's the one I used the one that is one unit with the tag light.
Nice
I have a tag light camera but im going to switch to a stealth camera
Just switch to a stealth camera. Used my tag light camera wires thru the rear trunk firewall. No tail light removal. Dirty hands though.
What length cable do you think is required for this run?
Most cameras will give you the wire you need. Typically 17 feet would be more than enough for a car this size.
Just did this I ended up running the wires through the seatbelt area down through the carpet through the gearbox to the radio
Thanks for watching!
is that a tomei dah?
I think so
Hey do you have any tips for wiring it thru a 350Z convertible?
Sorry not really specifically. I've never worked on a convertible to be honest.
@@AnthonyJ350 I actually ended up figuring it out, for anyone else wondering, make sure to open the trunk and the convertible roof halfway (it wont hit the trunk at all). You can pretty easily unsnap the fabric covers and go thru that under the roof struts to make it come out by the weatherstripping near the passenger seats. it was pretty easy tbh!
@@laurenabernathy2511 That's awesome, great job! Thanks for sharing!
Hey man can u make a video installing a security camera 360 for the Nissan I want to get one cuz some asshole keyed my car
I'll try to do one on a dash camera install.
Does this camera have guidelines?
Some do, you can also add guidelines if you have a head unit with that capability.
is it possible to add a 360 camera on this vehicle?
There are universal kits available
@@AnthonyJ350 Thanks! If you happen to install one be sure to film it!
@@lwh4566 I will
What pioneer stereo is that
Did you want something with Apple CarPlay and Android Auto?
Bro! I ran mine on driverside because less hassle and when you pull the 15" speaker you can access the hole and also feed it through to center console where theres 2 holes made for wire routing!
If that's what worked for you, awesome!
Only issue is to secure wiring on bracket for center console so emergency brake does not cut it!
@@4jiggaalways Ya I had to do something similar when we ran the USB and HDMI cables into the center console.
Who's here before 1k views
Probably like 5 people
I hit the wires installed for my z, no signal now and my z won't crank. Are these related?
What do you mean "hit the wires"?
@@AnthonyJ350 wires going to the camera. They were routed under by the pedals.
@@BFTR Check all your fuses and reroute the wiring away from the pedals.
Thank you!
@@BFTR You're welcome
Awesome video
*Check my 350Z*
When you get a chance
🤗🙏🙏🙏🤗
Sure thing!
you are wrong about feeding the wire through the bottom, that is the way that every stereo company does it with 0 gauge wire and subwoofers,. if it was a bad idea they would all go up via the headliner with a 0 gauge wire but they dont. theres plenty of room in those plastic areas you just were lazy and didn't want to pull them all off.
It's just easier running it outside along the bottom. I work on emergency vehicles which have way more wire runs and go through way more abuse. And our power runs are always on the inside. We also disassemble the whole interior to make the runs possible.
@@AnthonyJ350 Mate. I took the plastic off near the headliner and in some places there is only 1mm clearance or less. You telling people there is "more room there" is pure fantasy. There is several INCHES of clearance along the bottom panels. near the seatbelt plastic cover and where the car routes the rear wiper fluid hoses. As I saw that I said this Anthony guy has no clue what he's talking about. Running a wire up via the headliner is about the dumbest way to do it.
@@Runescape. There's room under the carpet and run with factory wire. You can run camera wiring up high as well since there's wiring up there.
Are you saying you run all your wiring on the outside of the vehicle?
@@AnthonyJ350 It's inside the vehicle. take the plastic trim off and you'll see where the factory washer fluid lines are ran, there is a sprayer on the back glass, the hose runs DOWN into the floor boards and past the seatbelt. there is a lot of room that way and every stereo installer I know uses that same path on the passenger side of the car.