Stop WASTING Money On The 5 , 6 & 8 Blade Props For Cinewhoops // TEST
Вставка
- Опубліковано 16 жов 2024
- 5 , 6 & 8 Blade Props For Cinewhoops? This is the test and my honest thoughts
So for the last few years I have tested 5 blade props, I have tested 6 blade props and recently the 8 blade props. I have spent a lot of money and burned motors during these test and this is my honest thoughts about these types of props! I personally was very exited about the 8 blade props , but was I exited for the results?
I fly cinewhoops pretty much every day, and having good props is very important! Especially if you want to have more silent props and less of a noisy drone. Cinewhoops are very loud and can be disturbing to other people, so I wanna get the best out of my cinewhoops!
Drones:
iFlight Cidora SL5 V2.1 w/ DJI Air Unit & Crossfire
Camera: DJI FPV AIR UNIT CAMERA
Affilient links & sponsores:
Sponsored:
3D Printer: 3dnet.no/colle...
Tango 2 Board: www.dindronebu...
Drone Buzzer: www.dronehande...
Affilient Links:
Artlist:
artlist.io/art...
Artgrid:
artgrid.io/Art...
Music: Artlist
Contact: Madshalvorsenphotography@gmail.com
Instagram: MadsHalvorsen
My testing came up with the same results the eight blade props look really cool but that’s about it. Might be good for inside stability carrying a full go pro but looking forward to your indoor test😎
Cool to hear! 😎 Yeah the 8 blades look sick, but that's not enough 😅
They have a nicer sound though. Great for around people. From bzzzzz to woosh
At least in my testing
I was using a slammed squirt so the props are a perfect fit to the ducts
I'm so glad to have come across your channel!
Its like you ALWAYS post videos about things which i have been wondering about!
Super happy with all the content you post and thank you for all your videos! They are super helpful!
Now I am so excited for the 27 blade 2.5 inch test on the x class quad 😎😎
HAHA my man! Gotta make that happen!
🤣🤣🤣🤣🤙
operators need to match the motor to the props
a wide stator motor with short shaft (2xxx size) is intended to swing a high thrust prop at a lower rpms (~1500-2000kv @ 6S) such as 6 or 8 blades
a skinny stator motor with a tall shaft (15xx size) is designed to operate at higher rpms (~2800-3000kv @ 6S) using 3 or 5 blades
So the protek should be better with the 6 or 8
When I want get speedy thing I get stock props from protek 35 but when I want do cinematic thing fly slower I would prefer 8 blades from hq prop,thanks great video👍👍
Thanks man!
I thought general wisdom is less blades is more efficient so longer flight time, but the 8 blade flies longer?
Great review, and I respect your opinion! My own testing was 100% the opposite, however. For me, the 8 bladed had the lowest sound at 10 meters, flew the smoothest, and had the most punch. The 5 bladed were second, though not much better than a 4 bladed or a high pitch 3 blades. The 6 bladed HQ props got thrown away as they sucked the joy out of flying. They sounded like forks scratching on a plate to me, and handled the poorest of anything I've ever flown, including my experiences limping a quad home with broken props.
thank you, will give them a try.
my protek35 started shaking on straight lines with 3blade after upgrading to 4.3 betaflight, weird
Great review😉looking forward to your indoor test 👍
well done, thx Mads for the episode!
Thanks! Appreciate that!
have you ever tried two double blades, one on top of the other so the offset blades cut less through the others wash? perhaps offsetting at different degrees to each other can affect noise levels as well. just a thought!
Did yo ubreak the proteks guards when you threw it at the end?
why 6 blade 3 inch on a 3.5 inch protek for indoors?
Which Radio are you using ist it tbs Tango
I found the 8 inch more quiet on my iflight protek 35. didn't notice the extra heat
That's interesting! I will for sure test more with my new motors too!
3 minutes without a gopro? why do these cinewhoops have such low flight times? My nazgul gets 9 minutes on a 1100 mah with a gopro 9 full weight.
what's the normal flight time on the protek with full size gopro and the normal props?
I have 6minutes on 1350 with gopro and pretty punchy on throttle. Could get more if flying smooth and slow-steady indoor.
On my 1300 4s i get only 3.5 minutes without gopro. Do you fly 6s
@@janbahar5322 It's very possible you fly faster and more acrobatically than I do on an average flight. You are right, all my FPV quads are 6s. If I really push the 5 inch I will get less than 9 minutes but even when freestyling I tend to do really low throttle cruising and then poppy punches.
I fly mostly 1100 mah and a few 1300 mah 6s batteries.
You should have had the gemfan 5 blade as well. They are the best IMO, asnd there are alot of people who feel the same. Hq is too low pitch, too narrow blades.
This was the D-76-5, still wasn´t too impressed.. :D But they are better on a 3 inch for sure!
Literally have this exact same video filmed... you keep beating me to everything. I quit
Hahah daaaaym! Sorry not sorry bro! :D
how easy is it to break the protek guards?
hard.,I banged up mines and it still hasn't broken yet
You just confirmed that you dont know anything about props. You cant just swap them randomly. They have to match with motor power curve, rpms, magnet count etc. If done correctly less blades are always more effective but more noise. Its physics!
In all reviews no one flies it as a cinewhoop ..lol.
can i have one cinewhoop :)
Stop wasting time making tests without stating the motor stator and kv you used.
That is a good point, will do in the future! Thanks a lot!
@@MadsHalvorsen ... and maybe a dB-meter (or phone app) too. So it wouldn't be so subjective.
But thanks man. I like your videos.
Your test is no good, of course you're going to get negative results if you don't put the right motor with the correct prop, higher blade counts require different KV and torque
That is very try! I have the 6S motors too and should do a more in depth video