Following the launch of NANOQ S, the NANOQ R will launch in May. A slightly larger size (16L vs 11L). Which would you choose?! Smallest size possible found here on the S, or slightly larger for extended cooling & GPU compatibility? Either way, as soon as the R version lands you’ll see it on the channel 😎 Exciting times for Thor Zone.
@@Gamber63 absolutely not. It requires time, patience and hardware planning, but the rewards are well worth it. A solid 8.5/10 - but would be more like a 7/10 with custom length PSU cables.
That is good, helpful advice! Building PC’s every week gives me more confidence to execute my own practices like this, but it is better if you’re not so experienced to insert the CPU first ✌️
You are the only content creator to have done it proper in this new case, aesthetically speaking. Great choice in component selection and perfectly executed. Thank you! 👍👍👍
Whenever I see artists painting / singing / playing music, I think to myself "so what I cannot do that, I am good at computers!"...then videos like this turn up 😩 This is really piece of art in my view! Thanks for sharing.
Dude why you´re using Intel K CPU for such an tiny case?? That cpu cooler seems to be very kind to use it on the 7800X3D. This Intel cpu under load is going up to 180W... maybe more. But not in this case, thanks to thermal throttling. The other parts do look fine to me. But why this unnecessary cpu heater (14600K) on a dead platform?? BTW back in the day i did like Intel more than AMD.
This is a nice pc build, my only complaint is why didn't you go with a 7800x3d since this is a gaming build?? 14600k is a dead platform, for a new build should of went am5.. plus it would had been cooler with less power draw etc..
I think one of the things I most enjoy in your videos is how they highlight the design of the products. There are probably teams of people working to design cases like this and your videos showcase that hard work.
Dude you are an artist, @netflix should f. hire you! And amazing niche the mini-atx build, I'm searching for something new. On the current video it's a pity that you didn't post the temps man ....
Apart of the satisfaction that this build gives and looks and everything esthetics.. this will have a lot of throttle in heat.. I have build a rig on Fractal Nano S and it was a disaster managing the heat... don't rush on these cases if you want a behemoth for gaming or editing...!! Peace..!!
Beautifully shot. My only concern would be the mash of cables blocking good air flow to any crucial areas. Also, could not tell how high off the ground the case is with those little rubber feet. The bottom fans would work much better if the clearance is adequate. I imagine a single stand in the middle with a thin bottom plate that would make the unit look like it's floating an inch or two off the ground. Over all, this is a beautiful case imo. Does it come in a white, brushed metal combo?
Beautifully shot. My only concern would be the mash of cables blocking good air flow to any crucial areas. Also, could not tell how high off the ground the case is with those little rubber feet. The bottom fans would work much better if the clearance is adequate. I imagine a single stand in the middle with a thin bottom plate that would make the unit look like it's floating an inch or two off the ground. Over all, this is a beautiful case imo. Does it come in a white, brushed metal combo?
When the motherboard was installed at 5:06, I was thinking "huh? is that going to fit?!" and just kept watching thinking that there was something I didn't know about the case. Looks like I was on the right track lol
Perfect Design and quality seems also very good. i like the way they solved some things. you did not used the original contact frame from Roman??? Shame on you, that is a sin with this build, it is worth to use just the best components. i love thermalright, but not in this kind of build.
I was liking all of his content but I realize that there is something lacking on his content, that is the performance of his build... Please put some performance test of your build in the future
This is just pure therapy - I often put this on just to relax, listen to some nice beats, be amazed by the visualisation and be inspired to build on my own PC - Love It😍
This is actually true, we mined the steel in Asgard before being escorted out by Thor himself, luckily enough for us we had gathered enough steel for roughly 500 units.
can see that u spent alot of time and effort in the video making💪 Thor Zone should appoint u to be their authorized youtuber and let u video their products going forward👍😉
That’s quite a statement! 😁 Truthfully, I absolutely LOVE working with visually interesting products as they drive my filmmaking enthusiasm harder (not that I need it mind haha) This project was actually pulled in very last minute and I barely slept for several back to back days to make sure I slotted it into my workflow. Nothing lost however, I loved every second of it 🫶
Ive watched several videos of yours, but I have to know - is this the actual path of airflow demonstrated by smoke/fog machine, or is this a computer simulation? These videos are insane.
Intel CPUs can run just as cool as AMD ones with very little to no fps loss if you know what you’re doing. Stock voltages go way too high because of both Intel and the mobo manufacturers. Simply disabling multi-core enhancement and down-clocking 100-200mhz will give you a nice temperature drop. Now, are the AMD CPUs more efficient? Yes but they can often run hotter at the same Intel wattage.
You can install a 240mm rad in there, and for the bigger 16L version you can do 280mm. With a custom loop and some planning you can even do a dual-rad setup in both.
The Case is 319 Euros, with handles and lightrays 380. Paying extra for good itx stuff is perfectly fine for me but with a price tag of over 300 Euros it’s an easy „No“ for me
14600K will be ok with that tiny fan radiator combo? 🤔Too bad radiator fins are not perpendicular to bottom fans. Oh well. Looks awesome though! Hope it runs without throttling.
We added a chamfer to a pretty sharp internal edge of the shell, included in all production units, so it pushes the riser out of the way. That said, it’s important to lower the shell down slowly and without using force - if it suddenly gets stuck that means something is in the way and needs to gently be pushed in. If you’re willing to invest an extra few seconds into putting the shell on carefully, you won’t have any issues.
Se ve muy bien, pero me gustaría saber las temperaturas en carga de la gráfica y el CPU. It looks very good I like the design, but I would like to know the temperatures of the processor and the graphics under load
It's a very cool build, but the red lighting behind the grill reminds me of a 1970s 3 bar fire. That said, every time I see a video like this, I wish I'd gone ITX on my build. This looks so damn nice.
I've been looking forward to this ITX case and it seems even higher-quality than I thought. However even higer-priced than I thought for my budget, I mean, that is just due to Japanese yen weakness.
Matt , do a build on the tecware fusion or fusion 2. its a SFF mATX chasis. Only been seeing fusion v1 builds. fusion v2 just came out been looking into rehousing my pc and want to see how it looks.
Thanks for the comment. I’ve just checked out the Fusion 2. Isn’t it basically the same internal chassis as the Jonsbo D31 and ASUS AP201? I can’t see many differences really other than the position change for the IO ports. The layout seems pretty much the same 👀
I like the added text information overlays in the "overview" part of the video. Could you possibly make the "build hardware" text overlay run longer? It's only five seconds long, my brain needs at least ten seconds to drink in the component goodness! Thanks.
Love the build but I've got a question about the CPU guard. Do you need to tighten the screws in any order or is it the same as tightening the screws on a CPU cooler?
Personally I'm more for cleaner looking boutique ITX cases which are more minimalist in design, but I'm all for new cases to hit the market! As always amazing camera work and editing!
Yep. Jay just built in his, and it's nowhere as nice as your build. You had the proper order to install the riser cable too - MB first, then screw on the case support. Very nice 👍
Following the launch of NANOQ S, the NANOQ R will launch in May. A slightly larger size (16L vs 11L). Which would you choose?! Smallest size possible found here on the S, or slightly larger for extended cooling & GPU compatibility? Either way, as soon as the R version lands you’ll see it on the channel 😎 Exciting times for Thor Zone.
So in terms of build difficulty, what lvl u gotta rate with this one, certainly not an ez one by the look of it
@@Gamber63 absolutely not. It requires time, patience and hardware planning, but the rewards are well worth it. A solid 8.5/10 - but would be more like a 7/10 with custom length PSU cables.
I would buy the R, since it can fit a 240-280mm AIO and a larger GPU. When you do the build on it you should get the wood grill option.
I'll be there. I'm falling in love with small builds 🤩
Really nice have the money but not the skill 😂
My goodness… that shot from 5:02 is too damn good 😍
I spent an absolute AGE capturing that shot. So stoked you appreciated it! 😎
@@Mr_Matt_Lee your effort in making that shot is very much appreciated ❤️ top tier quality content as always bro!
that is an awesome shot indeed
@Mr_Matt_Lee's camera work is always on point
Your videography skills are as good as your PC building skills. Your videos are a treat to our eyes :) @@Mr_Matt_Lee
The need for a cooler change really brings home the authentic SFF build experience. *chef's kiss*
1 of best and cleanest mini ITX build i've seen. Nicely Done!
I’d agree! There’s nothing I’d change really. Have an awesome week! 🙌
3:07 for safety, please guys always first insert the cpu, then remove the ihs.
You don't want to drop a screw on the pins
That is good, helpful advice! Building PC’s every week gives me more confidence to execute my own practices like this, but it is better if you’re not so experienced to insert the CPU first ✌️
About to build mine. Great tip, thanks👌
Really cool video Matt 🤙🏻. One of the best ITX Cases so far but the price is absurd. 350 - 400 €. Holy shit.
Такой кулер не потянет этот процессор. У меня он на 2 секционном с семью тепловыми трубками до 90 градусов греется.
Case is amazing!!!
14600k is mistake... overheating and throttling 100%.
12600 or 13500 best choice.
Or change to an AMD-System.....
Watch hardware canucks, am5 is also a challenge to cool. @@svensp5277
The NCR Ranger background hits hard. Such a sweet build
Well spotted! Love that wallpaper and totally suits the vibe 😁 glad you enjoyed it
You are the only content creator to have done it proper in this new case, aesthetically speaking. Great choice in component selection and perfectly executed. Thank you! 👍👍👍
Thanks Mark! Appreciate that. So stoked you enjoyed it 😁✌️
I sadly just built a Velke 5, 3.0 just 2 weeks before that new case hit the UA-cam Scene, had I known then what I know now.....😞 @@Mr_Matt_Lee
Whenever I see artists painting / singing / playing music, I think to myself "so what I cannot do that, I am good at computers!"...then videos like this turn up 😩
This is really piece of art in my view!
Thanks for sharing.
Got Mr Matt Lee on notifs. Can't miss a single video
Love this! Thanks for being here 😄🫶
Giving sith/empire/sake Vader vibes
Actually, Vader was hired as an external design consultant in the initial design phase.
Dude why you´re using Intel K CPU for such an tiny case?? That cpu cooler seems to be very kind to use it on the 7800X3D. This Intel cpu under load is going up to 180W... maybe more. But not in this case, thanks to thermal throttling. The other parts do look fine to me. But why this unnecessary cpu heater (14600K) on a dead platform?? BTW back in the day i did like Intel more than AMD.
beautiful! I love it!
Could have gone with a Thermalright AXP90 X47 Full Copper. Beats the ID.Cooling 55.
*and where are the temperature tests?😂4080 is cold,but 14600k?pff ..for SFF you need 7800x3d,much better ,i think for that shit😂*
This is a nice pc build, my only complaint is why didn't you go with a 7800x3d since this is a gaming build?? 14600k is a dead platform, for a new build should of went am5.. plus it would had been cooler with less power draw etc..
Best thing to wake up to on a monday. The music choices throughout the video are perfect 👌
I think one of the things I most enjoy in your videos is how they highlight the design of the products. There are probably teams of people working to design cases like this and your videos showcase that hard work.
100% true!
That's a hella good looking toaster!! Nice build!
Dude you are an artist, @netflix should f. hire you! And amazing niche the mini-atx build, I'm searching for something new. On the current video it's a pity that you didn't post the temps man ....
2024 year... Someone In the galaxy still does PC with frame for 1700 socket!
One question. Why are you so often using intel CPUs, I assume this is a gaming build, so why not use Ryzen 7800X3D ?
Apart of the satisfaction that this build gives and looks and everything esthetics.. this will have a lot of throttle in heat.. I have build a rig on Fractal Nano S and it was a disaster managing the heat... don't rush on these cases if you want a behemoth for gaming or editing...!! Peace..!!
Beautifully shot. My only concern would be the mash of cables blocking good air flow to any crucial areas. Also, could not tell how high off the ground the case is with those little rubber feet. The bottom fans would work much better if the clearance is adequate. I imagine a single stand in the middle with a thin bottom plate that would make the unit look like it's floating an inch or two off the ground. Over all, this is a beautiful case imo. Does it come in a white, brushed metal combo?
Beautifully shot. My only concern would be the mash of cables blocking good air flow to any crucial areas. Also, could not tell how high off the ground the case is with those little rubber feet. The bottom fans would work much better if the clearance is adequate. I imagine a single stand in the middle with a thin bottom plate that would make the unit look like it's floating an inch or two off the ground. Over all, this is a beautiful case imo. Does it come in a white, brushed metal combo?
When the motherboard was installed at 5:06, I was thinking "huh? is that going to fit?!" and just kept watching thinking that there was something I didn't know about the case. Looks like I was on the right track lol
С кабель-менеджментом полный трэш. Корпус разочаровал.
Мне не очень такой корпус зашел, слишком тесный для всех компонентов! Лучше ATX там куда проще и комфортнее)
Perfect Design and quality seems also very good. i like the way they solved some things. you did not used the original contact frame from Roman??? Shame on you, that is a sin with this build, it is worth to use just the best components. i love thermalright, but not in this kind of build.
I was liking all of his content but I realize that there is something lacking on his content, that is the performance of his build... Please put some performance test of your build in the future
I want, but damn the price lol! Fantastic build Mr. Lee...also cinematics.
you still could've used a Noctua, the NH-L91. unless the substitute was already in stock
This is just pure therapy - I often put this on just to relax, listen to some nice beats, be amazed by the visualisation and be inspired to build on my own PC - Love It😍
This machine looks like it’s going to be a pleasure to build and use but quickly become adust magnets thats a nightmare to clean.
The cost of that case is beyond ridiculous. No thanks!!😮
pc case these days it's like lego., I can't do that. I'll just stick to regular cases that's easy to build on... 😂
Amazing ❤❤
133k sub is incredible
1 subscriber or 1 million, just pleased to have a loyal following regardless 🙌
It's convenient and compact but... it kind of looks like a toaster with vents.
Definitely looks like it is made from Asgardian Steel. Even has that iconic thump at 0:40 like Thor's Hammer
This is actually true, we mined the steel in Asgard before being escorted out by Thor himself, luckily enough for us we had gathered enough steel for roughly 500 units.
Hey Bro Are there an ITX CASE to MICRO ATX BOARD!
Nao entendo por que alguem iria remover a trava original da cpu de uma moba carissima de high-end pra colocar essa trava do ali de 20 contos.
Vertically... That does NOT look stable!
How cute it is！
What's that black thing that's placed around the processor?
Loved the video. Curious how the temperature faired and if you under powered it.
Love your vidoe Matt! You have turned PC building into an artform.
Very nice build, case and video. Would be cool to see some peformance graphs.
For that small case I’d rather choose R9 7900 nonX
$350 case smh. Nice build though.
can see that u spent alot of time and effort in the video making💪 Thor Zone should appoint u to be their authorized youtuber and let u video their products going forward👍😉
That’s quite a statement! 😁 Truthfully, I absolutely LOVE working with visually interesting products as they drive my filmmaking enthusiasm harder (not that I need it mind haha)
This project was actually pulled in very last minute and I barely slept for several back to back days to make sure I slotted it into my workflow. Nothing lost however, I loved every second of it 🫶
Beautifully case, think I like it more than the terra
Hope to be rich to afford stuff like this one day.
Very well
Thank you 😁🙌
Cool videos. You are tightening the screws too much!
i am wondering will fit AMD 7900 XTX with amd build and furthermore will RTX 4080 super fit in it
The founders editions will absolutely fit :)
can you build with metalfish s3 plus
Would a GeForce Galax RTX 2060 fit into NanoQ?
Easily
Ive watched several videos of yours, but I have to know - is this the actual path of airflow demonstrated by smoke/fog machine, or is this a computer simulation? These videos are insane.
It’s an actual airflow demonstration. No single part of any of my videos are CGI or simulation 🙂
Poor 14600K will be throttling for rest of his life.
Intel CPUs are 🔥 hot
Intel CPUs can run just as cool as AMD ones with very little to no fps loss if you know what you’re doing. Stock voltages go way too high because of both Intel and the mobo manufacturers. Simply disabling multi-core enhancement and down-clocking 100-200mhz will give you a nice temperature drop. Now, are the AMD CPUs more efficient? Yes but they can often run hotter at the same Intel wattage.
No not really
ID55 will handle with 14600k in games, but the system will be hot and loud
Such a satisfying video
Sen bu işin en iyisisin. Süpersin dostum 🤙
I really want to buy this and it's all your fault!
КЛАССССС!!!!!
🤜🖤🤛
Yay a cpu contact frame!!! Beautiful build sir!
Looks like a Dr.Disrespect edition xD
Another awesome video! ...and another case for just looks, poor 14600k
You can install a 240mm rad in there, and for the bigger 16L version you can do 280mm. With a custom loop and some planning you can even do a dual-rad setup in both.
A good case for those who enjoy dusting out their pc once a month. That thing has zero dust filtering. It does look pretty good though.
It comes with dust covers.
These mini itx cases look better every year!
Just discovered you channel: every video is far above others more famous UA-camrs. You remind me MKBHD or Hardwarecanucks videos. Impressive!
Until all these hipster casings come with accessible dust filters, they are just a moment's eye candy and fail long term usage
Magnetic dust filters are included for all sides, Mr. Matt Lee shows them in the beginning 👍
Growing fast is to be expected given the quality of previous builds, now let’s get to watching this one
Thanks Steve! Hope you enjoy it 🖤
Toaster mit Grafikkarte und Licht😂😂😂
The Case is 319 Euros, with handles and lightrays 380. Paying extra for good itx stuff is perfectly fine for me but with a price tag of over 300 Euros it’s an easy „No“ for me
no mesh dust filter in front eh?
14600K will be ok with that tiny fan radiator combo? 🤔Too bad radiator fins are not perpendicular to bottom fans. Oh well. Looks awesome though! Hope it runs without throttling.
did you have trouble with the case hitting the riser cable? i saw another channel mentioning this and its my only hangup about getting this
We added a chamfer to a pretty sharp internal edge of the shell, included in all production units, so it pushes the riser out of the way. That said, it’s important to lower the shell down slowly and without using force - if it suddenly gets stuck that means something is in the way and needs to gently be pushed in. If you’re willing to invest an extra few seconds into putting the shell on carefully, you won’t have any issues.
Amazing looking build and amazing cinematography! :-) But how are the temps with an i5-14600K? Throttling also at normal gameplay?
I suddenly forgot about FRACTAL TERRA.
This is way more beautiful than that
I love this casr but i like white
Se ve muy bien, pero me gustaría saber las temperaturas en carga de la gráfica y el CPU.
It looks very good I like the design, but I would like to know the temperatures of the processor and the graphics under load
Почему наклейки с м2 не сняты?
It's a very cool build, but the red lighting behind the grill reminds me of a 1970s 3 bar fire.
That said, every time I see a video like this, I wish I'd gone ITX on my build. This looks so damn nice.
I've been looking forward to this ITX case and it seems even higher-quality than I thought. However even higer-priced than I thought for my budget, I mean, that is just due to Japanese yen weakness.
¿is that cooler good enough for a i5 14600k?
Absolutley no. It wil be always throttled.
Amazing vid, love the case, would be cool if you compared it to FormD T1 v2.1/2.5
Excellent video as always! Would you ever work on any of the MCPRUE Apollo cases? I think the ITX case would be cool to see.
Matt , do a build on the tecware fusion or fusion 2. its a SFF mATX chasis. Only been seeing fusion v1 builds. fusion v2 just came out been looking into rehousing my pc and want to see how it looks.
Thanks for the comment. I’ve just checked out the Fusion 2. Isn’t it basically the same internal chassis as the Jonsbo D31 and ASUS AP201? I can’t see many differences really other than the position change for the IO ports. The layout seems pretty much the same 👀
@@Mr_Matt_Lee i see thanks, matt! Imma check out your builds on the chasis you metioned 👌👌
I like the added text information overlays in the "overview" part of the video. Could you possibly make the "build hardware" text overlay run longer? It's only five seconds long, my brain needs at least ten seconds to drink in the component goodness! Thanks.
Your videos a therapeutic😅. Any way could you also post some temps under load for this setup.. I want to build the exact same thing 😊
Amazing and great to see you use the Thermalright cpu contact frame 👏🏻👍🙏. Especially in black!
Can you invert the layout? Seems like Top Exhaust would be best layout.
I'm curious on temps and noise level. It seems to have plenty of priority airflow, but would it be loud under load?
Love the build but I've got a question about the CPU guard. Do you need to tighten the screws in any order or is it the same as tightening the screws on a CPU cooler?
ЛАЙК !!!
Personally I'm more for cleaner looking boutique ITX cases which are more minimalist in design, but I'm all for new cases to hit the market! As always amazing camera work and editing!
Yep. Jay just built in his, and it's nowhere as nice as your build. You had the proper order to install the riser cable too - MB first, then screw on the case support. Very nice 👍
I feel like even with the 14600k some heavy undervolting and power limiting is going to be needed to keep it under control.