Warn winch failure strip & inspection
Вставка
- Опубліковано 6 вер 2024
- Following on from the two videos covering the testing/stripdown of the Warn contactor (solenoid), in this video we strip & inspect the 12v DC motor on a Warn ProVantage 4500-s winch. This winch was reported as failed by the owner & they sent it in for diagnosis. So...let's take a look & see why this, almost new, winch failed....
The techniques shown in this video will apply to the vast majority of small to medium size winches made by WARN & other vehicle type winch manufacturers.
Enjoy
Andy
Now, remember, you can get your dirty hands on the new Andy Mechanic Merchandise through the new Andy Mechanic Zazzle store, just click on the link below:
www.zazzle.co....
Also, if you’re keen to get an embroidered work shirt or jacket then visit:
andymechanic.un...
Both Zazzle & UniformNZ can ship to anywhere in the World so if you are far far away then just email them for a quote.
You can also become a Patron to the Andy Mechanic UA-cam channel. Patrons get special access to up and coming projects, future info about the channel & of course background info on the Tool Girls too! Here’s a link:
www.patreon.com/Andymechanic
If you'd like to send something through by post - a letter to be read out in the 'Mail Call' videos or maybe a parcel containing a surprise for your favorite Tool Girl, maybe a new tool for us to use in a video or a UA-cam channel sticker for the cabinet door or toolbox then you can send it here:
Andy Mechanic UA-cam channel
PO Box 6265
Victoria Street West
Auckland
Post Code 1142
New Zealand
You'll be sure to get a shout out on one of the videos too!
….or just flick me an email: andymechanic@live.co.uk
Oh…and here’s Tool Girl Lilli’s web site, that’s right, Lilli has her very own web site! Damn….
www.lillisteele.com
Thanks for all your support, until next time...
Andy
Great that we could see inside a winch an item many take for granted ! 🤘🇬🇧 Greetings from Teeside
Thanks. They aren't all that complicated so relatively easy to repair once you know what you're looking for :-)
Cheers Andy
Thank you Andy I always love watching your wonderful videos I am from South Africa
swamped my Grizzly last fall and winch worked to get it out. Did everything needed to restart including all new fluids but never thought about winch again till recently. clicks at the solenoid but motor does nothing. Reviewing this video before i go any further. just wondering if something else to try before diving in???
The complaint was winch dont work.Thats a pretty solid complaint,one of the best.
Nice video! A lot of these smaller units are only rated for a 5% duty cycle. It states in the manual that they are only allowed to pull max load for 45 seconds in a 15 minute period. 45 seconds of pull, then 14 minutes and 15 seconds rest time. If the customer were to pull hard on this thing for 5 full minutes....thats way past its duty cycle rating
Yes, I read the 'table' in the Owners Manual a few weeks ago - crazy limited time of usage, I doubt many people are even aware of this aspect. I'll include it in my next winch video - I have another one to strip & poss repair...
Cheers Andy
ThankYou.
If you know some places, you can have the armature re-wound and buy the brushes and put them in. Plus, bearings are bearings... I found a place that can upgrade a motor and make it more powerful
Nice work, Andy. like your idea of repairing thinks and not throwing them away. 😉 Looking forward for the gearbox vídeo. Would you consider installing an aftermarket new bearing and brush pack as worn only sells the case?
Yes, Definitely, provided the armature is in good order & they seem to be of good quality etc...does seem odd that Warn don't supply a service kit for the motor!
Cheers Andy
The most common reason this happens is when the user powers out the cable for a long time. Not using the free spool. The motor never gets a chance to cool. Just lazy people who don’t want to walk back and forth or new users who don’t understand how to use a winch!
40:24 Part 3,4 & 5 when you took the cog that acts like a clutch that spring part No 4 was not with the cog.
i want to see how that clutch works. looks a simple system
Hi Simon, yes, I'll maybe take a closer look when I do the final assembly video. Will likely be a few weeks away once the parts turn up :-)
See you on the livestream tomorrow...
Cheers Andy
@@AndyMechanic sorry andy im off out tonight but have a good week
Cheers. You too Simon :-)
Or check the gearbox first..if its kaputt the motor is losing money to by a new one.
Next video! :-)