How to Replace Crankshaft Position Sensor 2014-2021 Mazda 6

Поділитися
Вставка
  • Опубліковано 5 гру 2024
  • Buy Now!
    New Crankshaft Position Sensor from 1AAuto.com trq.video/ib-1...
    This video shows you how to install a new crankshaft position sensor from TRQ on your 2014-2021 Mazda 6. The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.
    Estimated installation time for a professional technician is approximately: 54 minutes
    This repair was done on a 2014 Mazda 6 Grand Touring 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
    2014 Mazda 6
    2015 Mazda 6
    2016 Mazda 6
    2017 Mazda 6
    2018 Mazda 6
    2019 Mazda 6
    2020 Mazda 6
    2021 Mazda 6
    Tools you will need:
    • Flat Blade Screwdriver trq.video/obPQ...
    • Pry Bar trq.video/oadU...
    • 19mm Deep Socket
    • 8mm Socket trq.video/obTR...
    • Needle nose pliers trq.video/oKg-...
    • Needle nose pliers trq.video/oKg-...
    • Ratchet trq.video/ocmZ...
    • Socket Extensions trq.video/ocno...
    • Torque Wrench trq.video/obo7...
    • Cloth Rags trq.video/oTN-...
    • Engine Oil
    • Gloves trq.video/obur...
    • Safety Glasses
    • Floor Jack trq.video/oaHK...
    • Jack Stands trq.video/oatY...
    • Pick trq.video/o8G-...
    • Wheel Chocks
    Subscribe: / @trq
    Check out our playlist:
    Mazda 6 3rd Generation 2014-2021: • Mazda 6 3rd Generation...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

КОМЕНТАРІ • 3

  • @TRQ
    @TRQ  4 місяці тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @nikitaluke7973
    @nikitaluke7973 Місяць тому

    Why is mine saying bank 1 and bank 2

  • @petervanhaeften
    @petervanhaeften Місяць тому

    Top dead center