How To Order the Correct Ford PCM
Вставка
- Опубліковано 29 вер 2024
- Need a replacement PCM? Having trouble figuring out which part number you need? In this video we show you how to determine which part number you really need.
When replacing a Ford powertrain control module, the most accurate way to ensure you receive the correct replacement unit is to order the unit by hardware type:
**The hardware type is identified by a code printed on the original PCM, typically by 3 alphanumeric characters, a dash, then another 3-5 characters
Was this video helpful? If so, make sure to like it, and be sure to subscribe to our channel.
For more technical bulletins click here: cardone.com/tec...
- Website: cardone.com/
- Facebook: / cardoneindustries
- Twitter: / cardoneparts
*Disclaimer*
At CARDONE we cannot guarantee against improper interpretation or application of the information we present in this video. You should always follow the enclosed safety guidelines, consult your OE repair manual for correct specifications when performing any install or repair procedure. Any injury, damage or loss that may result from improper use of tools, equipment, or from the information contained in this video is the sole responsibility of the user, and not of CARDONE Industries.
I needed a PCM for my 1998 Ford Taurus, went to auto zone, they couldn't get, went to O'Reilly, there cheapest was 200$, ended up going to pick and pull, payed 65$, didn't have to be calibrated, started right up, my problem was solved, no codes have popped up!
Ok, so was a PCM specific for model/year?
I hate modern cars,all they do is drain you dry.
And of course, I checked the website and my ECM is not stocked.
Very nice video
How can I find the proper ecu for a 1989 f150 5.0? when I got the truck the ecu was missing.
Man feel your pain, my 03 is obsolete from the dealer. Ever had any luck finding this sob ???
I just received my Cardone PCM and it says I can manually program without a scanner. It didn’t come with any instructions and wants me to refer to OE approved service manual for a 30 minute manual procedure. The average persons don’t have access to this information so where can I get setup information. 1993 Ford Taurus. 3.8. ALSO WHAT ARE THE SYMPTOMS of a bad pcm. My fuel pump runs continuously when the key is turned. And the car won’t start.
Thanks for the comment and the question Jeremy. Questions regarding repairs and troubleshooting should be directed to someone on our Tech Support Team, please call 888-280-8324 Mon-Friday 8am-5pm EST to speak with one of our ASE-Certified Technicians.
so i dont have all the required things to change out a pcm, i have to take it to the dealer for another $2000
This Video is Bull shit..... take your ECM out, and call 954-876-4662
Haven't had one Problem using this Company!!!
@@edwinstorz2776 What company is the number for ???
I got 2003 ford f250 5.4 4x4 ford tells me my pcm is absolete, can i get this year from you guys ??? but also will ford program this pcm ???
Hey Brian, ! If you have a question regarding Cardone parts or service, please contact us online at CARDONE.com or call our Customer Service line at 800-777-4780 Mon-Fri 8am-5pm EST. Technical questions would be directed to our Tech Support Team, please call 888-280-8324 Mon-Friday 8am-5pm EST to speak with one of our ASE-Certified Technicians. 👍😊👌
hey cardone you guys sent my pcm back to me and it was missing 3 parts I would like to get my parts back please
What if you have a v8 in a v6 body would it still work the same ?
I have an enquiry for the pcm. I use ford explorer 1997 v6 SOHC. I have a failure on ignition system. So, I ordered a second hand pcm with the same number, but it is from v6 OHV. Will it be a problem? Now, the engine is running good but I am not sure for the transmission program. Will it be the same? Many thanks in advance for your advice.
I purchased a ECM for my 1995 F-150 xl through Summit racing and was told by Cordone that they do not have one in stock so I asked if we Summit/ myself could send them my unit which they said yes but after a week of waiting Summit told me that if we sent it to them after being refurbished it would go to the person that ordered one before me and that I would have to wait God knows how long before I'd get it.
Bottom line that sounds to me like bad business practices.
I fix my ECM myself. !
Why are they breaking down after a couple years anyway? Engineers need to go back to school .
Is the pcm in the engine compartment. heat is the worst thing ???
I'm trying to put a performance chip in my 97 e 450 super duty with a 7.3. All chip suppliers say the same thing - we don't make em for vans. WTF ? I'm thinking the go around is to put a computer from a 97 f 450 pickup in. What say you sir ?
I don’t think your vehicle will start
CWF
I recently purchased a remanufactured PCM with the same part numbers that my old has its on my 2003 Ford E450 that previously had a service engine light (on dash) with a scanned code of PO155 which Is a faulty O2 Heater sensor on bank 2 .... replaced sensor also checked voltage, ground, fuses, wires all were good .....thats what lead me to believe the PCM was bad.....Ater installing the reman PCM my engine idle was so high I was afraid to put in it gear .......ran it for about 10 minutes To see if it would idle down. Turned it off I cycled the Key started it....again idle is high BUT NO SERVICE ENGINE LIGHT CAME ON and no PO155 CODE on scanner.......installed my old unit idle went back to normal ........My question is what did the supplier of the reman. PCM Not do that it would idle so high.
Hi Chris, what was the number of the original PCM? Did you purchase a CARDONE part and if so what part#? If you like, you can call our tech line at 888-280-8324 and a technician can help you over the phone. Thanks!
A shop recommended a new PCM, so it should know what was demonstrated here. 😊 hopefully!
I want to order one for me
Help me to order the computer box for a Rover
Never had a Problem with these Guys..... 954-876-4662
I looked this company up (Auto Computer Performance) and they don't offer services for pre 1996 OBD1 vehicles. Not impressed.
Wat if the motor swapped from 5.8l to a 7.5l would u need to change out the pcm as well?
Thanks for the message Ejay! This sounds like a question for our Tech Support Team, please call 888-280-8324 Mon-Friday 8am-5pm EST to speak with one of our ASE-Certified Technicians.
mine is missing. how do i order one?
still missing.
Go on the internet they'll ask for you vin
Hello sir i am mohammad nadeem from saudi Arabia 7i am Auto mechanic my ford grand Victoria 2011 ABS light flashing how do i am THANKS
lol
@@brucek2083 why you laughing
@@sierra5713 lol