Before I owned a bearing press tool I would place wooden blocks on the top and bottom of the headset, and i would use a clamp to apply pressure along with a few strikes from a rubber mallet to get the cups to seat proper. Thank you for the video you did a good job.
Converted my XC to touring. Installed 35 degree backsweep Velo Orange Crazy bar, have 50mm suspension seat post By.Schulz and really good SQLabs saddle. Less-to-No pain after every long rides.
eto yung mga upgrades walang plano. bumili ng MTB na flatbars, tapos nauso ang dropbars at convert pati groupset. tapos nauso naman ang touring setup,bumalik ulit sa flat bars. Nakabili na sana ito ng quality bike frame hehe
At one time, that was true pre. the 1x revolution. Do remember, you have multiple repeating gear ratios in 2x and Esp. 3x drivetrains and a 1x with a wide-range cluster eliminates those repeaters. My '18 Surly Karate Monkey has a 1 x 10 Advent X 10 spd. drivetrain (10-48t cluster plus Wolf Tooth 28t elliptical front chainring) that handles regular off-road duties quite well and will more than probably be as competent in it's role for Bikepacking. If i need anything lower gearing-wise, I'll shift to my eleventh gear; hike-a-bike mode...
One thing to note: when converting an old 2by crank to a 1by, make sure you use single speed chainring bolts. I dont know much about mtb cranks but on road cranks and fixed gear cranks this is the case.
Great job, Sir! I'll just ask you if how can I avoid to loose my crank cap/pre-load cap in hollowtech bottom bracket and how can I also avoid loose crank arm? Should I tight the two pinch bolts of the crank arm a little bit more?
have you experienced about Jones H-Bar? if that what is most comfortable handlebar in your case? I'm using Jone H-Bar right now but I'm curious about that handlebar anyway thumbs up from south korea
IMO. 2x chainring is the best to have especially ultra long rides (distance of 40 km to more than a 100 km) 2x just have a lot of gear ratio combination that helps you conquer any types of inclination or terrain and just a couple of additional grams of weight will surely compensate from the several gear ratios that a 2x can offer.
Mine too, 1x is very convenient , is nice to maintain, but 2x gives you more combination of gear ratios. And chain life and cassette is longer beceause of less chain crossing.
when people actually do real touring they want more gear options rather than less. I actually recommend a front triple if you are serious about touring. I have personally seen people that were miserable on tours when they were under-geared.
Hi I've just started looking at your videos, there is lots of thing I really like about it and I have a few question about your bike stand do you have a link to where to buy?
Yea agree, 1x makes no sense for a touring bike…. i t’s just the fashion nowadays…. but actually makes sense only for hardcore MTB’s where there is a risk of a front chain drop…. for road, gravel, touring etc in my opinion it’s less functional, and more expensive…
hi Coggie I'm from manila.. nag se service ka po ba?? balak ko po kade pa tanggal seatpost ko dahil na stuck po sya alloy seatpost at steel frame po.. test ko na po wd40 at yabe tubo nde gumalaw ung seatpost
hello boss,, i found you on the rating section sa shopee, we bought denham bar on the same seller, mejo mababa yun left side ng handlebar ko, im wondering if ganun din sayo and anyone here have a solution how to straighten aluminum handle bar, tnx boss, more power☺️☺️
Before I owned a bearing press tool I would place wooden blocks on the top and bottom of the headset, and i would use a clamp to apply pressure along with a few strikes from a rubber mallet to get the cups to seat proper. Thank you for the video you did a good job.
yes that's an innovative way to do it! right on!
BMX style!
GREAT!
It was great to be able to listen to you, to know better what you were doing.
Regards from Spain.
Thank you brother!
Converted my XC to touring. Installed 35 degree backsweep Velo Orange Crazy bar, have 50mm suspension seat post By.Schulz and really good SQLabs saddle. Less-to-No pain after every long rides.
Nicely done, great build! I love the brown! I personally would've gone from a 1x to a 2x haha
You and me both!
Parang gusto ko na rin ang ganitong handle bar ah...mtb convert to touring bike...thanks for the tips idol
eto yung mga upgrades walang plano. bumili ng MTB na flatbars, tapos nauso ang dropbars at convert pati groupset. tapos nauso naman ang touring setup,bumalik ulit sa flat bars. Nakabili na sana ito ng quality bike frame hehe
I actually like both configurations. Nice build eitherway.
Nice same brand ur 6.2 plus mine 6.2 foxter vinson mate black good luck to ur channel
Very nice video showing the work. Love the Koga Denham bar 👍🏻
Tagal mo nawala lods... Happy ako kasi meron kna ulit bagong upload... 👍
Nag pahinga lang po ako, break baga... 😁
Eyyyy!Nag voice reveal na pala si idol! Nice content as usual.Keep those cool contents and bike vuiks coming.
Nag sasalita na po talga ako sa mga previous videos ko hehe, tinamad lang ako kaya nag restore n lng ako mag bike wahahah salamat!
2 or 3x is the way to go for touring imo. Good vid btw 👌
At one time, that was true pre. the 1x revolution. Do remember, you have multiple repeating gear ratios in 2x and Esp. 3x drivetrains and a 1x with a wide-range cluster eliminates those repeaters. My '18 Surly Karate Monkey has a 1 x 10 Advent X 10 spd. drivetrain (10-48t cluster plus Wolf Tooth 28t elliptical front chainring) that handles regular off-road duties quite well and will more than probably be as competent in it's role for Bikepacking. If i need anything lower gearing-wise, I'll shift to my eleventh gear; hike-a-bike mode...
everything works out very well. the only thing that can be changed is heat shrinking the end of the cable instead of the aluminum clip
One thing to note: when converting an old 2by crank to a 1by, make sure you use single speed chainring bolts. I dont know much about mtb cranks but on road cranks and fixed gear cranks this is the case.
Yes it is true, and 1x bolts are too hard to find, some are out of stock lol
What is the difference?
I like that handlebar but also i like this transformation of this bike🚴♂️🚲💯
Great job, Sir! I'll just ask you if how can I avoid to loose my crank cap/pre-load cap in hollowtech bottom bracket and how can I also avoid loose crank arm? Should I tight the two pinch bolts of the crank arm a little bit more?
have you experienced about Jones H-Bar? if that what is most comfortable handlebar in your case?
I'm using Jone H-Bar right now but I'm curious about that handlebar
anyway thumbs up from south korea
this will definitely the inspiration i would want may daily commuter bike to take its final form..kulang nalang ang pera..haha
i am from India and i am your big fan
nice bike😎foxter owner here👍
Right on!
Good to see you upload again my friend! Keep up the good work!
Thank you max!
Great job as always. Bravo from Greece.
Thank you very much!
IMO. 2x chainring is the best to have especially ultra long rides (distance of 40 km to more than a 100 km) 2x just have a lot of gear ratio combination that helps you conquer any types of inclination or terrain and just a couple of additional grams of weight will surely compensate from the several gear ratios that a 2x can offer.
Yes, and 2X big ring allows for higher top gear ratio which will help you conserve energy on long, flat roads.
I have tried 1x and I don't like it
Mine too, 1x is very convenient , is nice to maintain, but 2x gives you more combination of gear ratios. And chain life and cassette is longer beceause of less chain crossing.
Excellent? You are a professional builder! Cheers.
Thank you very much!
꼭 자주 영상좀 올려주세요.
나는 노력할 것입니다, 불행히도 저는 정규직이 있습니다 :(
astig same tau ng setup sir!!! except for the GO Pilipinas tire hehehe
when people actually do real touring they want more gear options rather than less.
I actually recommend a front triple if you are serious about touring.
I have personally seen people that were miserable on tours when they were under-geared.
Satisfying video nnaman, nice one sir... Keep it up sir
Thank you po ulit sa bike😁😇
Hi I've just started looking at your videos, there is lots of thing I really like about it and I have a few question about your bike stand do you have a link to where to buy?
How did you bolt that carrier on the left side, considering the brake caliper?
The caliper is on the chain stay
@@CoggieBike oh i see.. thanks for the info 👍🏼
prone s kabyos to pg nsa 2nd or 3rd small cogs cgurado. try mo mgpalit ng bigger jockey wheels.
Another great video sir. Stay safe always!
Thank you!
Hello there ! Can you please send me the link of the bike rack that you installed here? TIA
Nice built touring bike!
O que você faz com essa as bikes que você restaura? Você fica pra você ou vende elas depois?
Gagi ang lupit nang hub slx😎
Any chain drop when back pedalling? And where did you get your rack? Thanks
Ang ganda sir 🤩
Is the bike not better for MTB ?
It's good but MTB setups are heave due to suspension forks
sir what is the name and, where did you buy your saddle?
Great job friends..ilike your upgrade....for reverensi..
Wow very good creation keep it up
Many many thanks
In this channel you first time your voice reveal
Panalo nanaman sir.
Tanung lang po kung saan ka nakabili din ng seat clamp na sakto doon sa btwin carrier
Nice conversion !
For touring, why go to a 1X? Would the added flexibility of a 2X not be more useful for touring?
Yea agree, 1x makes no sense for a touring bike…. i
t’s just the fashion nowadays…. but actually makes sense only for hardcore MTB’s where there is a risk of a front chain drop…. for road, gravel, touring etc in my opinion it’s less functional, and more expensive…
this is enough for our country - roads here are relatively flats, (except Mt. Province)
any link or info where you bought the bike carrier? ayaw ko na kasi dun sa carrier ko na nakaclamp sa seatpost
btwin carrier po yan nabili ko sa decathlon worth 700 pesos po
solid po bagong video mo lods! more uploads pa po hehehe Ride Safe po!
New subscriber here po,, ask ko lang po if saan po nabili yung rear rack carrier and will it fit a 29er wheelset? Thanks in advance.
Decathlon po sir
san po kayo naka bili nung seat clamp na my thread? thankyou
Yown may bago upload. Master ask lang ano po recommended niyo na upkit na 10 spd na budget lang more on long rides lang thanks?
Hanap po kau nung 10 speed na deore RD, then kahit mumurahing crank lang at cassette na 10 speed kung budgetarian kau. Importante ung RD
I notice the Accent, Filipino ka sah?
anyway ganda ng touring set up nato.
very good job, congratulations
What type of forks are you using?
may similarity po ba ito sa loop handle bar?
Ganda ng handle bar sir San nyo nabili po Yan. Tnx and ride safe..
tamang pampatulog lods
san mo po nabili ang seatclamp mount for carriers?
didn't you enjoy it more before? now with 9 speeds and such range must be hard to find the correct gear
It's actually not that hard and less complex
pede po ba 25+ degree 100mm stem dito sa denham handlebar? tumatama kasi sa tuhod eh
Boss anong size 29 ba yung gulong ng bike mo. Yung bike carrier mo saan mo nabili balak ko sana bumili ng bike carrier. Salamat po.
Coggie is the man!!! #Lodi!
what size bike mo boss and ano brand fork mo?
Good work
Thanks
Where did you buy the rear carrier?
Decathlon sir
Solid Sir! 🤘🏻
Saan mo nabili wire cutter mo idol
Nice build po sir! Ask ko lng po, san po kya links nung handle grip na cannondale😅thanks po keep up your good work sir!
shopee.ph/Cannondale-Trailshroom-Grips-Handlebar-Grips-i.196048799.15687531182
Hey Bro, where are you from?
kuya coggie, tanong ko lang po okay compatible pa rin po kaya yung 36t na chainring sa 12speed cogs na may ratio na 11-50?
Oo naman po,
@@CoggieBike yown salamat po kuya coggie!! CANT WAIT PO SA IBA PANG VIDS NYO!!💯
hi Coggie I'm from manila.. nag se service ka po ba?? balak ko po kade pa tanggal seatpost ko dahil na stuck po sya
alloy seatpost at steel frame po..
test ko na po wd40 at yabe tubo nde gumalaw ung seatpost
for touring just better 2 stars or even 3
Thanks!
@@CoggieBike ))
idol ano po tawag dun sa bilog na nilagay nyo sa itaas ng bar tape ng denham?
bar end po
@@CoggieBike maraming salamat idol
Wow legit po cool!
Nice vlog...new subscriber here..
Nice..!😃😃😃😍
Boss hindi ba kumakabyos yung kadena sa 11t pag nag goatlink? Sakin kasi kapa nag goatlink ako kumakabyos ang kadena sa 11t
Salamat boss
Hindi po, basta iyayapos mo lang maigi yung kadena sa cogs
ayos
Anong size po nung frame, fork, and wheels po?
Ano po ang length ng bike stem nyo po?
How can I contact you on social media platforms
Gaano kahaba handlebar boss
ano tawag po dun sa inadd nyong chain links sa 9 spd chain?
missing link po
@@CoggieBike bakit po parang nag add kayo ng 2-3 links kasama ng missing link
Where'd you get that seat clamp?
shopee.ph/Lucky~Seat-Post-Clamp-Fit-For-30.8-30.9-Mountain-Bike-Rack-Road-Bike-Adapter-lucky888-i.77464620.13860394211
ouch sold out na yung seat clamp an may adapter :( san kaya ako pwdeng mkabili nun
Ano po name ng handle bar?
Coggie can I purchase on cycle please
how to by this saicel🥰
Bro I want to do my cycle upgrade can you do it for me
NAYS MAY AUDIO NA
boss magkano pa set up sayo ng bike
Magkano po kuya ang pa restore ng bike?
un oh
Molto bella 👍
Perfeita .
sir pwede po ba kitang ma pm marami po kasi akonh nais pang malaman about sa build nyo po salamat
hello boss,, i found you on the rating section sa shopee, we bought denham bar on the same seller, mejo mababa yun left side ng handlebar ko,
im wondering if ganun din sayo and anyone here have a solution how to straighten aluminum handle bar, tnx boss, more power☺️☺️
Hindi po sir eh, baka hindi align ung pagkakaweld nung bar dun sa oversize adapter :(
no problem, sir, ill just leave comment here in case anyone here has a solution, more power, boss,👍👍👍
😊😊🌬
sir taasan mo pa yung fork mo.lagay k ng fork extention para nka upper yung body mo
Kala ko nabenta mo bro. Eto yung for sale diba?
Hindi ko na po binenta :)
*_Full fender nalang ang kulang._*