i have this same rifle and mine didn't like the hades either no matter what speed. the kings shoot pellet on pellet at 50 yards power level 4 average 845 fps. this is a very nice rifle. great videos looking forward to more. thanks!
I wanted a more powerful. 30 ..however, the quality on this is the selling point. No plastic👀...and Travis is the engineer...= .30 and the .25 will be mine this summer. Long-term value is worth the lack of high power for me. If only they made Jsair too🤔❤
Is the airtube 28mm? Can't wait for it to get to Tejas! May have already found a bottle conversion piece for it. Tell Mr Terminador to hurry up and dress it up! Guud review Mr A.O.Id.
I don't know but I watched you shoot all these groups and that Hades group if you took the two Flyers out of the group it was the tightest group out of the bunch you had one a little high and one a little low but the rest of them stacked right it where you were aiming and you know as well as I do wind plays a big factor on these shots as well
Sikk! Veery nice boss! Good to see different pellets through it. I've heard some not so good with the rifle as well. A whole bunch sending them back with alot of issues. I liked it when it first came out, but I'm hesitant about it. I like the power wheel on it. I've seen some other videos on it, they seem to like the diabolo shape pellets in 18 gr. Air Arms and JSB. It doesn't like the non lead pellets green labels, and you were shooting some of those. yeah you need to clean the barrels on them first and use all lead ammo in it. I'm curious to see what she does with some Terminador slugz. Prolly shoot good on high power level. hope she stays working! Hey great video on er overall! Sta safe out there! Hey, sta slingin that sweet air rifle lead! Ed snipper man 💥💪😱😱😱
@@tedsell1455 ya, anything made during the pandemic era will surely have flaws fer shur. I got my things made before. It depends some on the country it was made in and how well their factory is performing. I did get the new BRK Ghost HP magnum a few months back and so far haven't had any problems as of yet. I suppose their factory was ok or decent at the time. And anything should be tested first before shipping it out. It's what I make sure is done first. Pyramydair air and airgun depot, Airguns of Arizona do not check their products before shipping. And I've heard lately people complaining they're being sold refurbs as new items and or returns defective items! I do not purchase from those outlets for a few years now.only ammo if priced right. There are other companies that check their items selling before they ship them out,or you can ask.
I have the air cooled max in 25 and the standard then 20 to love both of them. What bench is it that you’re using that has that adjustable seat do you know the name of that Coldwell product? Thank you in advance and keep up the videos.
I have this in 22 cal great gun. I noticed yesterday a standard with 3200 fill pressure. Has JSB changed anything? Or just updated on possible fill pressures.
I know that you do a lot with slugs so I need to ask you something if the Airacuda standard at a max is at a max power tune and shooting the JSB 33.95-s at 780 fps would it shoot the FX 26 grain slugs accurately ??
I have the max in 22 cal. I'm shooting 20.2 NSA slugs. My last groups 9 of 10 shots were 7/8" at 75 yards. I'm still adjusting the hammer spring to get it right. I'm trying to get 1 inch groups at 100yds.
Dude the barrels in this Airgun come pretty dirty. That’s why you were getting those ugly groups. If you cleaned it you would probably get 1/2” with the JSBs
i have this same rifle and mine didn't like the hades either no matter what speed. the kings shoot pellet on pellet at 50 yards power level 4 average 845 fps. this is a very nice rifle. great videos looking forward to more. thanks!
Wow! Awesome accuracy! Especially with the and not cleaning the barrel. This really is a nice looking gun.
Nice rifle 👍
3:34 needs a de pinger
I Love .25 cal , Good Video Thanks
_Looking pretty good_
Chickens seemed to say it was relatively backyard friendly! Haha
I wanted a more powerful. 30 ..however, the quality on this is the selling point. No plastic👀...and Travis is the engineer...= .30 and the .25 will be mine this summer. Long-term value is worth the lack of high power for me. If only they made Jsair too🤔❤
Sweet Thanks for sharing!
You bet!
Thanks for the vid, very interesting.👍 just one question, how was the hammer spring tuned with these speeds?
Very smooth cocking.
Yes sir
Is the airtube 28mm? Can't wait for it to get to Tejas!
May have already found a bottle conversion piece for it.
Tell Mr Terminador to hurry up and dress it up!
Guud review Mr A.O.Id.
Not much about the air tube
The finish is not out of the box. But you did a nice job on that. Like I did on my 22 cal standard.
What y'all want to review next???
Guud review 👍🏻✌🏻🎯
Not sure yet
I don't know but I watched you shoot all these groups and that Hades group if you took the two Flyers out of the group it was the tightest group out of the bunch you had one a little high and one a little low but the rest of them stacked right it where you were aiming and you know as well as I do wind plays a big factor on these shots as well
Sikk! Veery nice boss! Good to see different pellets through it. I've heard some not so good with the rifle as well. A whole bunch sending them back with alot of issues. I liked it when it first came out, but I'm hesitant about it. I like the power wheel on it. I've seen some other videos on it, they seem to like the diabolo shape pellets in 18 gr. Air Arms and JSB. It doesn't like the non lead pellets green labels, and you were shooting some of those. yeah you need to clean the barrels on them first and use all lead ammo in it. I'm curious to see what she does with some Terminador slugz. Prolly shoot good on high power level. hope she stays working! Hey great video on er overall! Sta safe out there! Hey, sta slingin that sweet air rifle lead! Ed snipper man 💥💪😱😱😱
Thanks
@@airgunsofidaho4886 👍👍👍😁
Yes , but i Sent a FX back for air leak New
@@tedsell1455 ya, anything made during the pandemic era will surely have flaws fer shur. I got my things made before. It depends some on the country it was made in and how well their factory is performing. I did get the new BRK Ghost HP magnum a few months back and so far haven't had any problems as of yet. I suppose their factory was ok or decent at the time. And anything should be tested first before shipping it out. It's what I make sure is done first. Pyramydair air and airgun depot, Airguns of Arizona do not check their products before shipping. And I've heard lately people complaining they're being sold refurbs as new items and or returns defective items! I do not purchase from those outlets for a few years now.only ammo if priced right. There are other companies that check their items selling before they ship them out,or you can ask.
The posse is crashing the video 🤟🏻
Kool 👍🏻💯✌🏻🤠
Guud shooting 👍🏻
Nice scope on it
Thanks
What scope is it?
How was the trigger any better than the avenger for comparison. Regulator worked well.
It has a better trigger then a avenger
Interesting when I shoot 21.14 grain h&n match right on target the switch to h&n 36 grain slugs they also go a tad off to the right an low.
That's because the different speeds of the pellets and slugs
👏👏👏
What type of scope you have
I have the air cooled max in 25 and the standard then 20 to love both of them. What bench is it that you’re using that has that adjustable seat do you know the name of that Coldwell product? Thank you in advance and keep up the videos.
I am not sure of the exact name of the bench. I would just look for Caldwell shooting bench.
👋🏾sup brAh! Is the gun regulated? Try some of your pellets slugs braddah👊🏾😎
It's not regulated
I have this in 22 cal great gun. I noticed yesterday a standard with 3200 fill pressure. Has JSB changed anything? Or just updated on possible fill pressures.
Have you tried shooting slugs out to 100yds? I have been trying to get mine to group tight but I've only got it out to 75yds.
I know that you do a lot with slugs so I need to ask you something if the Airacuda standard at a max is at a max power tune and shooting the JSB 33.95-s at 780 fps would it shoot the FX 26 grain slugs accurately ??
I didn't know very much about this airgun. You can ask Texas j bird
@@airgunsofidaho4886 I don't think that he has this gun but thank you
J bird is the owner of the gun in the video
I have the max in 22 cal. I'm shooting 20.2 NSA slugs. My last groups 9 of 10 shots were 7/8" at 75 yards. I'm still adjusting the hammer spring to get it right. I'm trying to get 1 inch groups at 100yds.
@@bassmankelly1744 that's great !! Thank you for the info !! What are you getting for fps & fpe with the ZSA 20.02's ??
Dude the barrels in this Airgun come pretty dirty. That’s why you were getting those ugly groups. If you cleaned it you would probably get 1/2” with the JSBs
I think those are metal mags not polymags
Yea. There where metal mags
Hornets
Are you Dutch? You are mashing your Th's together like your are from the Netherlands.
With the 22 cal I'm getting 70 to 80 shots
That's a good shot count
@@airgunsofidaho4886 oh yea, I'm saving a lot of money in pellets 😆
70-80 shots? How many fps and type of pellet?
Ola Brasil❤
Give it back lol