HiKOKI WH18DBDL2 Impact Driver Review - Roundup #2
Вставка
- Опубліковано 6 вер 2024
- In the second part of the Skill Builder super impact driver roundup, we look at the HiKOKI WH18DBDL2 brushless 18v impact driver.
HiKOKI WH18DBDL2/JX 18v 2x6.0ah Li-ion Brushless Impact Driver
The WH18DBDL2/JX 18v Brushless Impact Driver features a high power brushless motor with a selection for 4 speed modes: Soft Mode for delicate work, Normal mode, Power Mode for heavy work and Self Drilling mode for use with screws.
Features and Benefits
- High power brushless motor with maximum tightening torque of 207Nm (hard)
- IP56 rating for dust resistance & waterproofing
- Triple hammer mechanism: three anvils for higher power and extended life
- Electric brake
- 3 mode LED work light: always on/automatic/always off
- Soft grip handle
- Forward & reverse switch
- Side hook can be fitted on right or left
- Driver bit not included
Technical Specification:
No-Load Speed - Soft Mode: 0-900
No-Load Speed - Normal Mode: 0-2900
No-Load Speed - Power Mode: 0-2900
No-Load Speed - Self Drilling Mode: 0-2900
Full-Load Impact Rate - Soft Mode: 0-1900
Full-Load Impact Rate - Normal Mode: 0-4000
Full-Load Impact Rate - Power Mode: 0-4000
Full-Load Impact Rate - Self Drilling Mode: 0-2100
Max Torque: 207Nm (Hard)
Drilling Capacity - Screw: 4-10mm
Drilling Capacity - Bolt: M5-M18
Drilling Capacity - HT Bolt: M5-M14
Drilling Capacity - Self Drilling: 3.5-6
Overall Length: 124mm
Weight: 1.6kg
Supplied With:
1 x Hitachi WH18DBDL2/JX 18v 2x6.0ah Li-ion Brushless Impact Driver
2 x 6.0Ah Li-Ion batteries
1 x UC18YSL3 fast charger with USB output
===================================================
Don't forget to stay up to date with Skill Builder!
Join our mailing list - skill-builder.u...
Visit our website - skill-builder.uk
See our Tweets - / skillbuilderuk
See our Facebook Page - / skillbuilderchannel
See our Pins - / skillbuilder1
Here’s a bit. Have put about 60,000 self tapping 6x40 mm screws in. Loved it when it was brand new. Have taken it apart heaps for general cleaning. After 30,000 screws (approx) I noticed the hammer anvil showing big wear. Significantly more than my Makita’s. However the Hitachi has a sealed bearing up front as opposed to archaic bush set up. As such , it doesn’t suffer speed wobbles after a couple of months ...like my makita’s .
That is great feedback. That kind of long-term test is just what people need.
with the 3-5 year warranty it should not be an issue...
This has been a great I pact driver for 4 yrs and got me going with more.in the 36V line as well
Between the innovations, promos, etc. most importantly the tools get it done. I’m seeing much light green as I load out as well baseball dude! I do wish they refined their production @ finish. but where it really counts they’re doing many things right.
The 36v multivolt version is badass!
You put your hex bit in, your screw bit out, in out...shake it all about....you do the HiKoki and you turn around...that's what it's all about.
Had Hitachi for about 10 years, just a basic impact driver and two 2.5ah batteries to start. The new stuff is superb. Just picked up this unit so I'm keen to find out how it handles.
I wonder if it will include the Lady Massager as well?
Hitachi released new 36V version of this impact driver, exactly the same size, they added juice left indicator on 36V battery, they say there is less overheating chance, and higher screwing performance when battery below 50%
maybe ask Hitachi distributor, I wonder how this 36V battery behaves on 18V tool, will it use whole capacity, or half, whether performance is similar to 5Ah ...
October 2018
deviceundertest I've purchased it on amazon.co.jр
I have been using the 18V and the 36V
The 36 V is definitely even more powerful and runs cooler than the 18V but the two 18V triple hammers have been holding up for over 4 yrs
very good review...for the settings : the first one is for the really small scews you can`t use with other impact drivers (just too powerful) and for the front bitholder,many others like milwaukee,makita,bosch and others,are not bigger. and the 3-5 year warranty is really a thing...
Great review as always Roger! Loving the new features on the channel, Ask the builder and The Extension. Don’t envy you cutting a live waste pipe... keep the videos coming!
For some reason, the shit never worried me but I hated unblocking urinals
Skill Builder 💩🤢
nice tool
My bloody Milwaukee batteries have holes in under them....some moisture came in a killed 4 out of 10 cells....lucky i had some spares lying around so i fixed it myself.....the thing wouldn't last 1 second in that bucket of water for sure
Are the battery's ip56 as well?
I can't wait to see the Makita dtd170
I have one of those as new but the trigger or a switch is cutting out..it's not working properly
there is a 3-year warranty on them around here,just replace it...
You can chuck water on panasonic
Yes but they no longer give it an IP56 rating
Panasonic? Didn’t know that’s a thing.
yeah never seen or heart about eighter
What is the best driver you've ever tried?
Nathen
Go to our channel and watch the Showwdown. DeWalt was best but Makita, Milwaukee, Hilti also good
Is it made in USA?
Here is video I made specially for you, to show how easily is to operate chuck one handed: ua-cam.com/video/bST0O72YCFo/v-deo.html