U mnie niestety nie działa. Nowa hulajnoga, wersja EU, kupiona w Polsce, max. speed 20 km/h. Podobno mam z najnowsze oprogramowanie w którym nie da się zastosować metod pokazanych w filmiku.
Yo la compre aquí en Colombia y viene a 25km, más desde la app de ninebot puedes ajustar la potencia de el motor y subir la velocidad a 35km sin modificar nada, solo ajustes desde la misma aplicacion
When I get to the point where it asks me to press the power button to authenticate. It does not work. I press it a few times and than it doesn’t connect in the app
Master control 1.11.1 (yesterday was 1.7.8 or something) and not working. If I change the start speed to below. 3km/h, it gives me the message that only on global version.. More speed is S mode can't be toggled under any form. You think they update the app regularly (Xiao) to keep up with Ninebot patches?
Hi! The second method doesn't work for me because I did an update recently. But in the first method, the app won't let me toggle on the higher speed in S. Any ideas why?
@@Idkmusic272 try to put your start speed as 0kph. Then keep toggling it until it turns on. Freely spin your motor while toggling it. You will hear it rev up when you are successful.
What's the most optimal way of using this one? Updating the firmware and doing the hack or not touching the firmware uptades and directly out of the box do the hack? In both cases, will the warranty proceed?
@@DJIDudeX2011 people are yelling not to upgrade the firmware cuz it messed up with the torque and some speed features as I've written.. I'm completely lost.
sadly didnt worked on my G2D Max. First, it wouldnt allow me to tick Higher Speed in S, and when i managed to activate it through going in EU Zone, it only allowed me to go up to 22 KMH
What firmware were you on? I think I will end on the same fate Man man man I hate these German rules 400KM/H in the Highway is no issue But 35km/h on a scooter: 😱😱🚔🚔🚨🚨
Hi! Isn't XiaoDash paid? Last time I looked, they were asking for money within the app. On my MAX G2 Master Control: v1.5.3 (I haven't updated to a newer version since I got it) Can I hack on this one? Thanks
@intuicio xiao dash will want you to pay if you want to expand your scooters functionality. It should ask you to pay on the BASIC side. The app is free.
I"m also on 1.5.3 in Europe. Has anyone had luck? I wasn't actually able to connect to the scooter at all, don't know why. I've already connected and bonded to the Ninebot App before so I wonder if that had anything to do with why no connection?
for some reason second method gives me an error(probably because I've updated scooter) and first one doesn't work either. sometimes I manage to switch the "unlock higher speed in S" controller. but it just turns off every time I restart the scooter, and speed just doesn't change what's wrong?
@@DJIDudeX2011 I can't set start speed to 0. But even if I put a scooter on some stand and spin motor freely, it just doesn't switch to higher speed now( probably it just doesn't work on european version or something
I might not fully understand, does the first solution work with the original software as well, or does it also require hardware modifications? If yes, is there a solution for the Ninebot F2 Pro where the scooter doesn’t need to be disassembled?
@sidi87 method 1 and 2 don't require taking apart unless you need to swap a controller. MAX G2 serial convert:X F2 Pro serial convert:S Will work for f2 pro with method 2 and method 1 If you update your scooter and try method 2, it won't work for g2 and f2 series. That will require a new controller then. No modifications required.
@@DJIDudeX2011 I cannot authenticate with the power button. The application keeps freezing. I don't have a region change button. I haven't made any modifications; everything is as it was when I took it out of the box.
@@DJIDudeX2011 sadly didnt worked on my G2D Max. First, it wouldnt allow me to tick Higher Speed in S, and when i managed to activate it through going in EU Zone, it only allowed me to go up to 22 KMH
If Your talking about F2 Plus. You can do method 1 like the g2. Method 2 is different. Instead of changing the fourth letter to X, you change it to S. You can change to X and will still work.
Thank you for this video! I was loving my G2 but was getting a little bored at 25km
The only downside is it beeps constantly at 35km. Anyone know a fix for this?
You are welcome! I'm not sure why it's beeping
Wont work for Germany if there is someone trying. The Controller wont let you change serial number.
same for Italy :(
me too but first method is work
Btw first method works on latest firmware, including EU version
Yes.
U mnie niestety nie działa. Nowa hulajnoga, wersja EU, kupiona w Polsce, max. speed 20 km/h. Podobno mam z najnowsze oprogramowanie w którym nie da się zastosować metod pokazanych w filmiku.
Dam, that sucks. You need a new controller, or you need to flash it, which i dont know how to to@marcinbe6831
Wont let me put 35kmh only 25 max?@@DJIDudeX2011
Yo la compre aquí en Colombia y viene a 25km, más desde la app de ninebot puedes ajustar la potencia de el motor y subir la velocidad a 35km sin modificar nada, solo ajustes desde la misma aplicacion
That means you've already got a global version.
@@DJIDudeX2011 siiiii , más en europa o otros países donde este bloqueada se cambia el num de serie y ya esta.
When I get to the point where it asks me to press the power button to authenticate. It does not work. I press it a few times and than it doesn’t connect in the app
Master control 1.11.1 (yesterday was 1.7.8 or something) and not working. If I change the start speed to below. 3km/h, it gives me the message that only on global version.. More speed is S mode can't be toggled under any form. You think they update the app regularly (Xiao) to keep up with Ninebot patches?
What I would do is keep on toggling it while you are spinning your motor freely
@@DJIDudeX2011could you do a video on this, I’m not able to unlock the 33 km/h
@@ilyadauen7656 wont work for germany 😢 Region locked. You cant change serial number. They Made a special Controller only for Germany I guess.
When i click unlock higher speed it keeps saying 25km . In youre video i see 35 .
Mine got glitched. You should still go 35kph even though it says 25kph
@@DJIDudeX2011 tried but is still goes 25 bad enough
The app need license it will cost u 70€ in Germany
This work also for g30lp nitbot unlocked to 35?
Would this work on the Australian version was about to buy a max g2 my f65 is flogged out lol
@@LankeyK yes. I'm in australia🤣
Do you have to pay for the app?
Is it possible to bring it back as it was originally and will I lose the guarantee
Yes. If you don't update it
Hi! The second method doesn't work for me because I did an update recently. But in the first method, the app won't let me toggle on the higher speed in S. Any ideas why?
@@Idkmusic272 try to put your start speed as 0kph. Then keep toggling it until it turns on. Freely spin your motor while toggling it. You will hear it rev up when you are successful.
hey, did it work?
What's the most optimal way of using this one? Updating the firmware and doing the hack or not touching the firmware uptades and directly out of the box do the hack? In both cases, will the warranty proceed?
@@tiodeniz nothing will be avoided if you use method 1
Do I need to upgrade the firmware to do such? Cuz everybody is yelling and recommending not updating any firmware via official app..
@tiodeniz you don't update firmware if you're going to do method 2
@@DJIDudeX2011 people are yelling not to upgrade the firmware cuz it messed up with the torque and some speed features as I've written.. I'm completely lost.
@tiodeniz just don't update your scooter if you are using method 2. Method 1 doesn't matter if it's been updated or not
Method 2 - czy zmiana numeru nie powoduje problemow z pobraniem aktualizacji ? Czy w razie potrzeby mozna przywrocic poprzednie ustawienia ?
If you change the serial number than update it, you won't be able to restore your old serial number as it will be locked.
sadly didnt worked on my G2D Max. First, it wouldnt allow me to tick Higher Speed in S, and when i managed to activate it through going in EU Zone, it only allowed me to go up to 22 KMH
What firmware were you on? I think I will end on the same fate
Man man man I hate these German rules 400KM/H in the Highway is no issue
But 35km/h on a scooter: 😱😱🚔🚔🚨🚨
@@Wailky2008 xDD I got the newest that is a few days ago
@@AstralisCM did u try global and change to 01GXE... replaced it with x?
Does the 2nd step work in Europe ????
@user-fr1if3zb9y it depends if you've already updated it.
@@DJIDudeX2011what maximum firmware version should be to be able to do this? does this work with 1.7.0?
@@shanovnui.pankarpo method one will work on any firmware
@@DJIDudeX2011 thanks
No worries
Hello, does it still work for Ninebot Max G2? Currently limited to 25.
Yes. Use method one if you updated it. Use method 2 if you didn't update it.
@@DJIDudeX2011 Will it cause any problems to my device? Warranty coverage is not very important, but I do not want to break or lock the software.
@@DJIDudeX2011 If it doesn't work, can I reconnect with the original software?
@@muhammetaliozdemir4979 no problems
@@muhammetaliozdemir4979 yes
Hi! Isn't XiaoDash paid? Last time I looked, they were asking for money within the app.
On my MAX G2 Master Control: v1.5.3 (I haven't updated to a newer version since I got it) Can I hack on this one?
Thanks
@intuicio xiao dash will want you to pay if you want to expand your scooters functionality. It should ask you to pay on the BASIC side. The app is free.
@intuicio it will ask for donation after doing method 2 but just ignore it.
I"m also on 1.5.3 in Europe. Has anyone had luck? I wasn't actually able to connect to the scooter at all, don't know why. I've already connected and bonded to the Ninebot App before so I wonder if that had anything to do with why no connection?
Does it work if master control is v1.5.2 ?
Do you think this would work on the segway F2 eu version
@@JMEXBX yes. Use method 1. Or 2 but instead of X, use S
No it doesn’t work
@@bilbobaggins492 are you doing it correctly?
@@DJIDudeX2011 on an updated firmware it will not work because it’s restricted 🚫
@@bilbobaggins492 yes. I know
for some reason second method gives me an error(probably because I've updated scooter)
and first one doesn't work either. sometimes I manage to switch the "unlock higher speed in S" controller. but it just turns off every time I restart the scooter, and speed just doesn't change
what's wrong?
Try to set start speed to 0kph, then keep toggling the S mode switch while the motor is spinning freely
@@DJIDudeX2011 I can't set start speed to 0. But even if I put a scooter on some stand and spin motor freely, it just doesn't switch to higher speed now( probably it just doesn't work on european version or something
@@shanovnui.pankarpo yeah. Maybe try method 2
Все заработало по методу 1, прошивку не обновлял стоковую
That's good!
Did you buy the premium version to hack?
Does this work with ninebot f2 pro?
Yes. Same thing only change to S instead of X
I might not fully understand, does the first solution work with the original software as well, or does it also require hardware modifications?
If yes, is there a solution for the Ninebot F2 Pro where the scooter doesn’t need to be disassembled?
@sidi87 method 1 and 2 don't require taking apart unless you need to swap a controller.
MAX G2 serial convert:X
F2 Pro serial convert:S
Will work for f2 pro with method 2 and method 1
If you update your scooter and try method 2, it won't work for g2 and f2 series. That will require a new controller then.
No modifications required.
@@DJIDudeX2011 I cannot authenticate with the power button. The application keeps freezing. I don't have a region change button. I haven't made any modifications; everything is as it was when I took it out of the box.
@sidi87 ive got no idea what's going on with your scoot. Maybe look at a different solution.
did you find a way to remove speed limiter from ninebot f2 pro?
I have iPhone what can I do ?
does it work on the newest update that came out like 1 or 2 days?
@@AstralisCM should work.
@@DJIDudeX2011 sadly didnt worked on my G2D Max. First, it wouldnt allow me to tick Higher Speed in S, and when i managed to activate it through going in EU Zone, it only allowed me to go up to 22 KMH
@@AstralisCM dam. That sucks. You need new controller
Is it one time?
Doesn't work on 1.7.6!!!!
@kevinpinto7281 try method 1. Put startspeed as 0kph, then freely spin your motor. It should rev up when you're successful.
Will this work on segway ninebot G2 plus
Yes.
If Your talking about F2 Plus. You can do method 1 like the g2. Method 2 is different. Instead of changing the fourth letter to X, you change it to S. You can change to X and will still work.
@@DJIDudeX2011and for f2 pro is the same thing?
@@mistra757 yes
@@DJIDudeX2011so with the f2pro the 4th serial number must be changed with the S or the X?
will this work on segway ninebot g30
@@trxbeznl117 I'm not sure. You might need to set it to global 30kph.
@@DJIDudeX2011 I already hav that
@@trxbeznl117 oh. I dont know then
Will this work on any firmware?
No. It only works for non updated firmwares
Method one will work
@@DJIDudeX2011 Method one will work with updated firmware?
@@Some1sm method 1 will but not method 2
Method one on mine f2 pro doesnt work .. when i swich on, unlock higher speed it still gives me 25kmh . Any tips @@DJIDudeX2011
Per jeep
@@ALESSANDRO-kl4cz ?
Doesnt work in Finland?
Can u make yours read 45 on the gage?
yo it does not work on ninebot f2 :(
Dam.. if you didn't update it, change serial number to S the 4th letter
@@DJIDudeX2011 i did change it to S in the 4th letter but that did not work. But how to I update it
@@turbosnusaren turn on unlock higher speed in S mode