Thanks mate, I can confirm that this works for the Australian model with 1.7 firmware. The acceleration seems to be a bit weaker than it used to be, but happy to reach 32/33 km/h.
I have a question can you change the speed after you did this on the sliding bar in the ninebot app? Like it is going 32 can i open the app and change it back to 25 on the ninebot app?
@@nadirbelhaj6450 just use the exact same steps as before except this time use this code instead of the other 155AB4D41583253636F6F7465725F30 ittl make it so that the max speed is 25kmph again
@@wma_international wir haben es schon verstanden. Wir sind an Informationen interessiert. Vielleicht wissen Sie, wann es einen neuen Weg geben wird? Ich möchte schneller werden
Xiaodash, go basic, go select region, select custom serial, write 01GX……. (Remaining same either the orginal code). Mission complete for 1.4.4 and 1.4.8. Enjoy
I did this process using this method and then with xiaodash, thank you. When I was going to send it to the service, I reset it to its previous state. Can the service see that I overclocked it now? I'm afraid they will leave it out of warranty.
@@majidmute first of all make sure your doing it on an Android device but anyway this is the code for 35 km/h: 55AB4D41583253636F6F7465725F31 and then to change it back to 25 I used the same one but at the end changed: 55AB4D41583253636F6F7465725F30
Ich habe den Tuning-Code per BLE-Scanner geflasht ... die Geschwindigkeit ist auf 30 km gestiegen ... ABER gestern habe ich meine Firmware auf der Original-App aktualisiert und die alten Einstellungen wiederhergestellt ... 25 km usw. .... Ich habe es noch einmal mehrmals mit dem Tuningcode und BLE-Scanner versucht, aber 30 km sind nicht mehr aktiviert.
Max G2 for those wondering. Done in 5min. Happy chappy here. Still wondering what happens when the next Ninebot update comes out. Will the hack remain?
Same here. I noticed if you open the ninebot app immediately after adding the code in the ble app, the max speed slider for sport mode goes up to 40kph, but as you scroll to full that value gradually drops back down to 25... Very strange
Working!!! To all, at first didn't work but I had the wrong device I connected to - If not working, make sure you have the right device you're connected to on the BLE App - Working like a charm on my Ninebot Max G2 - Thanks SO much dude!!! Loving it and a great video!!!!!
Hey i just bought my g2 ninebot v 1.7.6 like ik about xiaodash but that to expensive i can afford so if u don't mind i onky one question this this still work in germany? And by the way like if i change my region with vpn to American unit states can that work? Nobody try that
Hey. Just got the max g2e eu version yesterday. Got it running 36.5 kph eith 1384w peak eith xiaodash and segway ninebot app. No other mods etc. I also have the us options in ninebot app , Cruise control etc. My question is, should I be worried frying something with the 1384w peak ? Regards from denmark
@@thepoohwinnie5389 i updated all things firmware etc before changing region with xiaodash. Just remember to unbind and rebind with segway app after then it should work :)
@@Fft-it1fk klart mate, du aktivere bare med segway appen , opdatere firmware . Efter det så brug xiaodash til og ændre region. Og så unbind din scooter fra segway app og bind igen. Så har du alt du skal bruge :)
Hi thank you for giving out this video. I am just contemplating to buy this model and this is great. 25 kmh is a bit slow for me, but this little higher speed would be just great. So how do you paste the code? Do you need to highlight the text, copy and then paste it? Thanks again.
Is this code for switching from 22mph to 32mph or is it kmh? your description says kmh but the top speed on the max is 22mph . Will this code work the same for a US scooter? Iv'e never done this before does it flash the scooter or its just a simple click? Does this risk the scooter getting fried ? Is it able to handle a higher speed? How would it void the warranty if you can always change the code back?
250W ???? my god, in Switzerland it's 20km/h and 500W and I'm complaining strongly because of the W.... as we have so many hills it's a kind of impossible to climb.
@@bluepawn Yep, almost no scooters actually have 250W though, if you ride "normal" and don't draw any attention to yourself and have a scooter looking legal, than it shouldn't be to much problem though. But yes, 250 isn't good for more then going forward.
Hi, Great vid, works for older software but does this work for Max G2 with 1.7 software? I read that (if it does work) the speed reduces from 32kph to 25kph at 40-50% battery. Using the video process there is no figure in the "properties". only has Properties: write,write_no_respons. There is nothing for HEX. What number do I use? Please help Thanks
Thank you for the video Liked & Subscribed to your channel . I am confused as to why premium scooter companies like Vsett and Inokim do not include electric horns or turn signals on their products, which people often ride on the roads. Segway seems to be leading the way in this category. I also appreciate the designs of other brands, but it would be beneficial to include these technological features.
@@Fft-it1fk Hi! I tested Xiaodash and US region change. I got invalid serial number and i have to go back EU region setup. Seems to be that G2e version and newest firmware wont allow region change.
Ah ok, now i connected the dots. I saw this two days ago but when i saw the German one, i didn't connect that it was you :) Hope Ninebot review comes in english aswell then!
I tried this on europ model from belgium but i doesnt worked for me anyone tips ??? It still stays on 25km/h
Thanks mate, I can confirm that this works for the Australian model with 1.7 firmware.
The acceleration seems to be a bit weaker than it used to be, but happy to reach 32/33 km/h.
I have a question can you change the speed after you did this on the sliding bar in the ninebot app? Like it is going 32 can i open the app and change it back to 25 on the ninebot app?
@@nadirbelhaj6450 the slider on the app stays the same, only goes up to 25.
I’m in Aus as well, and it’s not working for me? Did you do it any particular way man?
Yo, can i tune it down back to legal speed after. if like the police shows up to my house?
@@nadirbelhaj6450 just use the exact same steps as before except this time use this code instead of the other 155AB4D41583253636F6F7465725F30 ittl make it so that the max speed is 25kmph again
Hello, do you know if it is possible to do this with the version 1.7 ?
Yes, I just did mine.
@@GayanTharakahow did you do it? It doesnt work for mine. Im on 1.7.0 with serial 01GY
@@GayanTharakacan you give us some directions?
Hello i have the same the 01GY and mine drive only 25 kmp but live in Belgium how i can ontluck the speed
@@JensErmgodtsdat gaat helaas niet
Met de Europese versie je moet een USA controller
Halen
today it was updated to 1.4.4 and the code does not work. I tried again but without result
Same here...
Does not work if updated to 1.4.4. only with the older Versions 1.3.5/ 1.3.6
@@wma_international do you think it will be solved in the newr future?
@@wma_international wir haben es schon verstanden. Wir sind an Informationen interessiert. Vielleicht wissen Sie, wann es einen neuen Weg geben wird? Ich möchte schneller werden
please make a video for tuning 1.4.4 firmware
Xiaodash, go basic, go select region, select custom serial, write 01GX……. (Remaining same either the orginal code). Mission complete for 1.4.4 and 1.4.8. Enjoy
@@KVCOGis it still works?😊
Can you please help. I have a android and I download the BLE scanner app but my new G2 does not show up?
Same probleme !
I did this process using this method and then with xiaodash, thank you. When I was going to send it to the service, I reset it to its previous state. Can the service see that I overclocked it now? I'm afraid they will leave it out of warranty.
Thank you man, my G2 is reaching 35 km/h in Australia
How man can u help me?
@@anasbye1135 you just do whatever the video is doing
in the end of code 31 or did you dial another number?
@@majidmute first of all make sure your doing it on an Android device but anyway this is the code for 35 km/h: 55AB4D41583253636F6F7465725F31 and then to change it back to 25 I used the same one but at the end changed: 55AB4D41583253636F6F7465725F30
35 AU
It’s working fine without issue on ninebot max G2, Master control v1.7.3 reaching 35 km/h.
Many thanks,
How tf?
How dos it work with v1.7.5
In europe? Bc how the fuck
Hi dear thanks for video. Do you know to delete User on segway app. Because we forgot icloud accont pasworrd and we can not enter another user
Thanks🙏 there is no way besides logging in and removing the Scooter..
I have the version 1.4.4, is there an update of your video about this version ? as that is not working anymore. Thanks.
No only till 1.3.6. You can check out my german Channel. There are more Videos about other tuning Options
is this limited to the max g2? I have the f2 pro and want to get increased speed. I'm in Nz
Ich habe den Tuning-Code per BLE-Scanner geflasht ... die Geschwindigkeit ist auf 30 km gestiegen ... ABER gestern habe ich meine Firmware auf der Original-App aktualisiert und die alten Einstellungen wiederhergestellt ... 25 km usw. ....
Ich habe es noch einmal mehrmals mit dem Tuningcode und BLE-Scanner versucht, aber 30 km sind nicht mehr aktiviert.
Geht ab FW 1.4.. nicht mehr
I have an EU version of the G2 with a 1.7 firmware. Can you help me reacking 32 hm/h please ?
check out my last Videos ;)
@@wma_international Thanks I did ! I heard about a wallys method that dont require a StLink. Did you try this method ?
Damn! This actually works in Aus on v1.7.3 You're a legend bud. 😉
Max G2 for those wondering. Done in 5min. Happy chappy here. Still wondering what happens when the next Ninebot update comes out. Will the hack remain?
@@Byceptor does this only work on androids or on apple to?
I did it on android and it works. The app on iOS is different
What is the code?
Its not working
Confirmed working for me in NZ on firmware version 1.5.3
Hey bro just got mine last week, does this still work?
@jayeshpercy9265 not sure about the latest firmware. So if yours in on a lower firmware you should be good
Recently i moved to Germany i really I appreciate your efforts , by the way you speaks English very good better than me 😊💜🙏🏼
Thanks 🙏
Does not work for MAX G2E European, firmware 1.7. Tried many times. Simply ignores changes.
Same here. I noticed if you open the ninebot app immediately after adding the code in the ble app, the max speed slider for sport mode goes up to 40kph, but as you scroll to full that value gradually drops back down to 25... Very strange
@@eggmangle Did you find any solution?
@@jonaliseacarreteromarquez8042 unfortunately not
@@eggmangleany updates?
@@jonaliseacarreteromarquez8042 any updates
Is it possible to set up F2 PRO Segway without voiding the warranty? The current limit is 25 km/h.
There is a code for f2 but Im not sure if its possible to track the hack
What is the code
Thank you so much, this works on segway g2 max, version 1.5.1. Now i am able to compete with the traffic.
For me is not working, how did you do it ??
Same procedure as mention in video. Maybe some segway with different serial number behaves differently?
Mine just worked
I think german model is locked and cant be modified using this tutorial
i'm from spain and my firmware is v1.5.1, the BLE scanner don't show me the hex serial, 😐
Code?
Will be enabled the cruise control as well? Because right now it is disabled in Europe.
It is not available now. But in the next time I think it will be possible
Mine doesn't show the Hex code
What is that piece on the handlebar right next to the thumb throttle?
That is the clip to when you are folding it.
thanks work for me
25 update to 32kmh
how to update to 35 or 40kmh?
Working!!! To all, at first didn't work but I had the wrong device I connected to - If not working, make sure you have the right device you're connected to on the BLE App - Working like a charm on my Ninebot Max G2 - Thanks SO much dude!!! Loving it and a great video!!!!!
Hey i just bought my g2 ninebot v 1.7.6 like ik about xiaodash but that to expensive i can afford so if u don't mind i onky one question this this still work in germany? And by the way like if i change my region with vpn to American unit states can that work? Nobody try that
No does not work any more. You need to ST Link or buy another Controller
T’es excellent mon frérot, continue comme ça . Bye..
Where is the hex code to copy?
Mine is not working with v1.7.5
Check out my new Video😉
Hey. Just got the max g2e eu version yesterday. Got it running 36.5 kph eith 1384w peak eith xiaodash and segway ninebot app. No other mods etc. I also have the us options in ninebot app , Cruise control etc. My question is, should I be worried frying something with the 1384w peak ?
Regards from denmark
Have you connected the scooter to ninebot app before changing the serial? And if so what version you were at?
Jeg har også lige fået en G2E kan du hjælpe mig? 🙏🏼
@@thepoohwinnie5389 i updated all things firmware etc before changing region with xiaodash. Just remember to unbind and rebind with segway app after then it should work :)
@@Fft-it1fk klart mate, du aktivere bare med segway appen , opdatere firmware . Efter det så brug xiaodash til og ændre region. Og så unbind din scooter fra segway app og bind igen. Så har du alt du skal bruge :)
@czeczej2795 i was on 1.4.4 when I changed
Where do i find the number ending in 30?
Caption
It works for me here in New Zealand. 35km/hr
Hey bro how did you do it?
Are there codes for 1.4.4 or a way to downgrade my master control
Does not work with 1.4 and there is no chance to downgrade at the moment
@@wma_internationalplease i want to to have also fast!! 22kmh is too slow. German rules.... scheiße!!
I have DRV 1.4.8, BLE 1.6.10, serial 01GYD*****, its doesn't work. please advice
i have the EU version
More English g2 max videos please 😅 there is next to no modification videos and you have a bunch on your other channel, but I can't understand them
I share mine and we have seperate devices does the speed only work when im connected or does it change the scooter itself
Hi thank you for giving out this video. I am just contemplating to buy this model and this is great. 25 kmh is a bit slow for me, but this little higher speed would be just great. So how do you paste the code? Do you need to highlight the text, copy and then paste it? Thanks again.
your english is good bro , keep going
Thank you 🙏
Is this code for switching from 22mph to 32mph or is it kmh? your description says kmh but the top speed on the max is 22mph . Will this code work the same for a US scooter? Iv'e never done this before does it flash the scooter or its just a simple click? Does this risk the scooter getting fried ? Is it able to handle a higher speed? How would it void the warranty if you can always change the code back?
Im sure it is only for the eu versions vause us is faster from the start. Yes kmh
What is the code you pasted, where did you copy it from?
In description
BLE Scanner what is this application for ?
I have millions of Bluetooth BLE near me... but can't find my serial number of my kickscooter... it looks hidden.
Does this work with G2E model?
Have you testet xiaodash with this scooter ?
Did not work with the german G2 Version
@@wma_international not good :(
can i do it on Ninebot KickScooter MAX G30D II?
No only for G2
I have a ninebotF4d it goes up to 20km/h, can I use that same code?
No the code only works with G2.
At the moment I dont have a code for F4
@@wma_internationalhi thank you for the video, actually i need a code for my ninebote audi electric kick scooter ?
Thank you again
In Sweden we can only drive in 20km/h and scooter can have maximum power of 250W, that's not enough for some heavy riders even.
250W ???? my god, in Switzerland it's 20km/h and 500W and I'm complaining strongly because of the W.... as we have so many hills it's a kind of impossible to climb.
@@bluepawn Yep, almost no scooters actually have 250W though, if you ride "normal" and don't draw any attention to yourself and have a scooter looking legal, than it shouldn't be to much problem though. But yes, 250 isn't good for more then going forward.
Hi,
Great vid, works for older software but does this work for Max G2 with 1.7 software? I read that (if it does work) the speed reduces from 32kph to 25kph at 40-50% battery.
Using the video process there is no figure in the "properties". only has Properties: write,write_no_respons. There is nothing for HEX. What number do I use?
Please help
Thanks
i'm from spain and my firmware is v1.5.1, the BLE scanner don't show me the hex serial, 😐
Hallo habe bei der segway Ninebot App Probleme den Scooter zu entfernen
Belgium and Holland they put on a machine to test the speed, electrical bicycles also
Thank you for the video Liked & Subscribed to your channel . I am confused as to why premium scooter companies like Vsett and Inokim do not include electric horns or turn signals on their products, which people often ride on the roads. Segway seems to be leading the way in this category. I also appreciate the designs of other brands, but it would be beneficial to include these technological features.
Thank you🙏
Can you test this setting with xiaodash. I read that would work on 1.4.4 version.
works with xiaodash app change to uk/us version 35 km/h and cruise control active in app
@@Fft-it1fk Hi! I tested Xiaodash and US region change. I got invalid serial number and i have to go back EU region setup. Seems to be that G2e version and newest firmware wont allow region change.
Does not work from 1.4 on
I can use it for max g30d?
Only for G2
@@wma_internationalhow can we find a code for our scooter ?
I'm on 1.7.0 with 01GY serial. Does anyone has solution for me without changing controler?
Did you found any solution ? Im searching too
@@vincent_gbls739 no : (
hex number is not coming up
In description
Awesome 🤗 in jamaica it's 30. I have the Hiboy s2. But I'm thinking of getting it but how long does it maintain the speed.?
Thank you🙏
What do you mean with maintain the speed? To what battery level?
@@wma_international ok I understand the first tubas
@@wma_international I was saying the first two bars
@@wma_internationalDoes this work with ninebot f2 pro??
Does not work with EU v1.5.2 firmware
Check out my new Video😉
How to make 45 ? my G2 stops at 35
Check out my new Video😉
New firmware version doesn't work!!!!
Does this work wirh ninebot f2 pro?
No, you need another code
1.7.8 it didn’t worked for me. Any recommendations?
update: app didnt show 35kmph only shows 25 but its working somehow
@@burakrasan3290 mine dorsnt work
Nope, new firmware 1.7.0 does not show the Hex value anymore to change. This mod no longer works
just did it, can be done on apple to in aus and now going 35kmh
why my segway g2 max can't change region im from s.korea😢😢😢
#WMA_International Hi, does this also work with the G2D version? Do I have to disconnect the application after entering the tuning code?
Hi Denmark, My Shows the code in HEX, and the change randomly
Good morning, where did you get the code?
Wo bekommt man den Code her ? Ich möchte das mit den P65 testen🎉
Geht nur beim G2
Where do you find the code to change thanks
Hi . what about the ios BLE scenner anyone give it a try
Yes, works
can i use the same code for Ninebot F2 PRO D?
No, this is the code for F2 Pro: 55AB463253636F6F7465725F31
Do the same steps, but use this code instead.
@@tl4438 thanks
Thank you🙏
Ah ok, now i connected the dots. I saw this two days ago but when i saw the German one, i didn't connect that it was you :)
Hope Ninebot review comes in english aswell then!
They will! Thank you 🙏
Are you able to do all your other videos from your other channel into english
Does it work for g 30
No
Tried it and it stopped connecting to my phone
Does it work on Xiaomi 4 ultra?
No
Hello can some one explain in dutch how to set it up til 30 35
Is the iPhone app willing to do this procedure or it's only possible on Android device ? I see there is that app on appetite. Great work by the way .
Thank you🙏
Yes, also possible with IOS 😉
@@wma_internationalwhich app though
How do you tell if it's German or Australia
Mi dispiace in Italia ho provato ma nulla sempre a 25kmh rimane😢
Hey buddy. Thanks for the video. I have a questions. Working whit iOS?
How do you get your hex code
Is the code you used the same one I will use?
Just copy n paste the code works great 35km
There is a new G2 controller that can reach 40km/h and comes with NOS
worked on mine Australia based 35kph now
I’m in Aus as well and it didn’t work..? Any particular way you did it?
What is the code that you entered
unlucky under 60%battery it drops to 25kmh ...
Yes but this is normal. Always depends on the mode and also weight
@@wma_international the issue is that it’s a 36v battery, my KQi3 pro is 48v and it last 30kmh till 20% battery
@@wma_international todays standard is 48v, 36 is outdated…., I’ll return my G2 max tomorrow
Im thinking of buying max g2 or kqi3 pro/Max what should I buy
@@okosajy5296 KQi3 max, if more budget p100s, G2 sucks atm
Wher can i find dis code?
in the title subject of this video
Ciao, io ho iphone ios , non ci sono riuscito
Nope. Didn't work for me. So sad.
In Spain is only 25km/h
i got it to 35 kmh S/N - 4th to V
how bro?
@@junenarvaez945 Xiaodash changed S/N to V , 4th from the left.
1:23
i bricked my max g2 with Xiaodash lol
Hau dis hex code apired on ?
Hey what the french country's
está bueno!
Not funkcion ..evropa
Check out my new Video😉
Wher u get code?
USA 22 miles limited