I have searched all day long on how to get my drone to factory reset. I put posts on Facebook and on the Forum with little to no response. Thank God I found this video. It worked perfectly. I followed your steps on how to take it apart...and was nervous as hell doing it. I'd like to thank you for taking the time to make this video and sharing it with us! It is much appreciated!
OMG Thank You that is what its there for Brother glad You found it and welcome to my channel i have been working on a Solo today myself hope You enjoy the rest of my content I also Subbed You Brother
Great video, i just fixed my 3DR by following your video after crashing it from 20ft high, all i did was remove the SD card and put it back and done!!! Thank you for the video.
Thanks Bro for the video. I have a solo that was doing the cut in and out on the video when running full throttle. Your video help fix the problem with the hdmi cable. Also Dan is the man.
Thank you for the video. I just did a factory reset on mine and now I got a solid orange and the transmitter at preflight update status. I also recently got the solex app. Any help or suggestions greatly appreciated.
Good on you for taking the time to make the video. I got lucky when mine wouldn't connect, I left the battery in the controller out for a few minutes and mine reconnected. I 3d Printed some legs for my controller but couldn't find a screw long enough to work. On thingiverse you can print a lanyard mount that hangs the controller properly it's awesome.
, hey MD 95 sweet video if I was doing that video I don't think I would have waste time showing everybody how to put it back together I would have just told them do it in reverse that way off camera you can take your time and put it back together without making any mistakes putting it back together is a lot harder than taking it apart what I want to tell you I just bought my solo about a week ago I love it I've never seen anyone take it apart like you just did but I guess that will be food for thought for me thanks for the video man good stuff
Brother this is what i do on camera is better for showing detail i made no mistakes i can tear anything apart and rebuild its just everyone doesn't share this ability so that's why i am here Thank You Brother
Man i did not know you had a bad ass drone work zone!! And you have a lot ov r.c. drone stuff!! I love it!! My next buy after a little brushless whoop itll b a 3dr or something to take good footage with!! Thanks for sharing all this info!! Nice job i would be afraid to take it apart my luck i would pull a wire out or something stupid lile that!
Well this is true i did a update on my solex app and thought i did something but was a stupid update lol Thank You Brother my work area is nothing special
Appreciate you and your time for this vid, for some reason I cannot install open solo through ssh. I get a error when trying to mount the card, so I'm gonna go ahead and pull her apart and manually place the files needed in Golden so I can just use reset to install the new firmware. Thanks again bro
My controller does not pair with my solo drone it was on thes morning when I turn it on I went to the park and is not pairing now is the 3th time I took my drone to fly it is frustrating please help
same issue here m8. only with me it happened after i completely disassembled the bird and transmitter to check for any loose wires or hidden damages after a crash. I fixed the body and tried it on. It all still worked and had all motors running indoor even rather quickly. I Assembled everything back to as it was and the stuff turns on shows lights makes the usual sounds and beeps , but the transmitter keeps looking for SOLO and the Solex app either wont connect succesfully but has long attempts trying to connect it... It does see the soloWifi signal and enables the use/login correctly with the SOLOLINK network...
Can you help with the solo itself? Mine will not reset or pair, the pair button appears to do nothing at all, the orange light is on all time.... thanks in advance..
Awesome thanks from uk new sub, i did this changed the gps board and also replaced the pixhawk but i keep getting level calibration failure at the last stage, any ideas?
How do I reinstall the os onto the SD card? I turned off the drone while it was doing a factory reset and now when I turn the drone on the back light are solid yellow and the front is green and red. Now I can’t connect my drone to the controller to try and reset update
My Solo needs a Compass Calibration in Which it’s rejecting it. I’ve tried with an Opened Field and it’s still it’s asking me to do an Compass Calibration.
I don't have the 3dr but I set up a play list and added this video so I'll have it in case I get one (It'll take a miracle at this point in time😂)! Thanks!
I have a problem with mines it won’t pair orange light behind the bird is not flashing it is on but with no flash removed and card from remote and put back together did not remove the one from the bird but will do
well now. i THANK YOU for the video! so, i got all that done as you showed me...clicked my sd card 3 times..and it didnt' take me to the homeland!!! all 4 motors stay solid green, no matter what...AND, now the orange led does this.. blink blink---blink blink---blink..and on and on
Could You post a Video to show Me what She is doing If you follow this video it maybe Your sd cards Hey email me your number if You can typing back and fourth confuse's lol md95tsi@aol.com
I have searched all day long on how to get my drone to factory reset. I put posts on Facebook and on the Forum with little to no response. Thank God I found this video. It worked perfectly. I followed your steps on how to take it apart...and was nervous as hell doing it. I'd like to thank you for taking the time to make this video and sharing it with us! It is much appreciated!
OMG Thank You that is what its there for Brother glad You found it and welcome to my channel i have been working on a Solo today myself hope You enjoy the rest of my content I also Subbed You Brother
Great video, i just fixed my 3DR by following your video after crashing it from 20ft high, all i did was remove the SD card and put it back and done!!! Thank you for the video.
Thanks Bro for the video. I have a solo that was doing the cut in and out on the video when running full throttle. Your video help fix the problem with the hdmi cable. Also Dan is the man.
You are my Hero Bro! What a awesome tutorial!
Thanks!!
Thank you for the video.
I just did a factory reset on mine and now I got a solid orange and the transmitter at preflight update status.
I also recently got the solex app.
Any help or suggestions greatly appreciated.
Good on you for taking the time to make the video. I got lucky when mine wouldn't connect, I left the battery in the controller out for a few minutes and mine reconnected. I 3d Printed some legs for my controller but couldn't find a screw long enough to work. On thingiverse you can print a lanyard mount that hangs the controller properly it's awesome.
Great tip will try next time Thank You for stopping by
, hey MD 95 sweet video if I was doing that video I don't think I would have waste time showing everybody how to put it back together I would have just told them do it in reverse that way off camera you can take your time and put it back together without making any mistakes putting it back together is a lot harder than taking it apart what I want to tell you I just bought my solo about a week ago I love it I've never seen anyone take it apart like you just did but I guess that will be food for thought for me thanks for the video man good stuff
Brother this is what i do on camera is better for showing detail i made no mistakes i can tear anything apart and rebuild its just everyone doesn't share this ability so that's why i am here Thank You Brother
way to take time to help out brother.... top notch man
Thank You Brother this is what i do
Awesome video man. I really love these tech videos. Now I know what a drone looks like from the inside. I liked...🎄🤘😉
Anytime Brah
Man i did not know you had a bad ass drone work zone!! And you have a lot ov r.c. drone stuff!! I love it!! My next buy after a little brushless whoop itll b a 3dr or something to take good footage with!! Thanks for sharing all this info!! Nice job i would be afraid to take it apart my luck i would pull a wire out or something stupid lile that!
Well this is true i did a update on my solex app and thought i did something but was a stupid update lol Thank You Brother my work area is nothing special
good job bro .helping out thats what it's all about.
Exactly Brother this is what i love to do thanks Chris
Hey man good stuff thanks again
Thanks Bro
That's why some channels don't get alot of subs and likes...hhmm, just saying...
stopping by to show some love! xoxo
Thanks Brenda
Appreciate you and your time for this vid, for some reason I cannot install open solo through ssh. I get a error when trying to mount the card, so I'm gonna go ahead and pull her apart and manually place the files needed in Golden so I can just use reset to install the new firmware. Thanks again bro
My controller does not pair with my solo drone it was on thes morning when I turn it on I went to the park and is not pairing now is the 3th time I took my drone to fly it is frustrating please help
same issue here m8. only with me it happened after i completely disassembled the bird and transmitter to check for any loose wires or hidden damages after a crash. I fixed the body and tried it on. It all still worked and had all motors running indoor even rather quickly. I Assembled everything back to as it was and the stuff turns on shows lights makes the usual sounds and beeps , but the transmitter keeps looking for SOLO and the Solex app either wont connect succesfully but has long attempts trying to connect it... It does see the soloWifi signal and enables the use/login correctly with the SOLOLINK network...
One Last Question, Every time that the 3DR Solo Needs a Compass Calibration would you have too re-Do the level Calibration as well?
Yes i would do all Calibrations Thanks for Your question
Can you help with the solo itself? Mine will not reset or pair, the pair button appears to do nothing at all, the orange light is on all time.... thanks in advance..
Awesome thanks from uk new sub, i did this changed the gps board and also replaced the pixhawk but i keep getting level calibration failure at the last stage, any ideas?
How do I reinstall the os onto the SD card? I turned off the drone while it was doing a factory reset and now when I turn the drone on the back light are solid yellow and the front is green and red. Now I can’t connect my drone to the controller to try and reset update
Does the software still work for the 3DRs?
My Solo needs a Compass Calibration in Which it’s rejecting it. I’ve tried with an Opened Field and it’s still it’s asking me to do an Compass Calibration.
"That's why I do what I do!" Is this what you need to do when you have a "controller that has mismatch error" . Thanks
Like to get those legs extenders for my 3DR
Great Info MD95
Thanks john
I don't have the 3dr but I set up a play list and added this video so I'll have it in case I get one (It'll take a miracle at this point in time😂)! Thanks!
Smashed that LIKE BUTTON#SupportSquad🤘🏾
Thank You
And By the Way it’s So True On What you said about the Alfa And anntena
I have a problem with mines it won’t pair orange light behind the bird is not flashing it is on but with no flash removed and card from remote and put back together did not remove the one from the bird but will do
👍😎
well now. i THANK YOU for the video! so, i got all that done as you showed me...clicked my sd card 3 times..and it didnt' take me to the homeland!!! all 4 motors stay solid green, no matter what...AND, now the orange led does this.. blink blink---blink blink---blink..and on and on
You did the bird as well that is what mine was doing blink blink that light on the bird did you try the factory reset after Brother
yes. it doesn't change anything on it tho. just the blink blink...blink blink...
Could you do a video on it please
yes sir. as soon as my dinner is done. lol
Thank You Sir and enjoy Dinner
Hello how are i wonder if you could help me out on my solo the thing is it wont reset im needing help bad to get the bird in the air could you help
Could You post a Video to show Me what She is doing If you follow this video it maybe Your sd cards Hey email me your number if You can typing back and fourth confuse's lol md95tsi@aol.com
My number is 573 721 0440 my name is john im up all nigh
Will Call Brother
ua-cam.com/video/YNsUT5CGy5o/v-deo.html
FINISHED THIS LIST BROTHER HOPE IT HELPS WITH YOUR MINUTES.
Thank You Brother Your awesome
I have got all the white glue off and my SD card is not coming out
my phone wifi will not connect poor signal , controller will connect to the drone
No I have not.