I think you might have the bracket wrong, the one doesn’t go directly under ur bars, it goes under the bolt, on the other side of the triple tree. Thats why you had to use spacers for ur headblock.
This is exactly what I was thinking. If you put it underneath. I feel like it would have been the exact gap they had to spacer out. I’m installing right now. Guess I’ll find out. Lol.
Thanks for the video fellas. Just going to install one as soon as the new headlight arrives. I got mine from Motea, a German company but they are all the same. It was advertised as fitting a Dyna Lowrider, but it doesn't as you have to put new bars on etc. Anyway, no big deal as I'd bought new bars from AR Harley in Blackpool, UK, they are are really good company to deal with, and I got my Biltwell bars from them. As is always the case, when working with Harleys and houses, double what you think you need to spend LoL! I watched your video on the wiring extension as well keep up the good work.
dynademos , so far you guys are doing some of the mods I have planned. My next mods are Öhlins rear piggyback shocks and I’m upgrading the front end with patriot Suspension springs. Where are you guys from?
Right on! I’m from Chicago. Been doing a lot of research on the front suspension, although I would love to get the inverted front end kit for my bike 5k is just way too much. So far I’m leaning towards the patriot Suspension kit. It’s gonna be a sweet setup.
Don’t take the wrong way, your channel came up first so fitted in similar way. After watching. A few more figments I realised it fits under the triple tree. No need for spacers. Can do on your own in a hour or so. Needs a headlamp extender to make light fit perfectly. Sorry to pee on your fire, not meant with malice and your other stuff is good.
I must have got the jc customs because I had to go to the bottom side to make look nice. I also bent the mounts for the windshield in just a little bit to make the little bracket sit flush and didn’t have to find longer bolts.
Top fairing mount bracket goes on bottom side of top tree. That way, bracket id hidden and longer bolt for headlight mount is not required. You made it more difficult and looks like crap.
So I watched another video on UA-cam and he puts the top bracket underneath the the top triple tree and not on top like you guys have it..his headlight is flush too..what’s the right way to do it?
Just mount the upper bracket under the yoke ( tree to you Americans ) and modify the headlight bracket / block to fit, looks far tidier than jacking the fairing up like you have. Or hell by a different block there cheap as chips.
Hey just wondering if this situation you guys had to do with the installation would be the same for my ‘18 (softail) street bob FXBB by chance? Now that it’s a softie.
Got my Krator fairing installed with the Moonsmc headlight extension block on my dyna low rider s. What torque spec did you guys use for the handlebar bolts underneath? I seem to be finding on forums about 30-40 ft lbs, does that sound right?
Awesome job guys. Couldn't make it any easier! Question. Any idea how to mount it to a 2012 Street Bob with the riser already cast into the upper tree?
@@dynademos Thanks. The only way I can see it working is to mount it to the forks, like a Memphis shades or Conley's. There is no place for a mount on the upper tree.
Grant Brunsvold yeah I am not a fan of the built in risers your probably the 4 th person that has hit me up about them they make everything more difficult lol
Carolina Dyna u can definitely do that with the Memphis shades just mount the top brocket on the top side of the upper triple tree and the block on the upper side of the lower triple tree should sit flush in there
I have an Arlen Ness headlight block. Krator fairing en route. If I mount the top bracket to the underside of the top triple tree between the bolt head washer and riser bushing washer will it work? Your thoughts on that one please?
If I’m not mistaken that block is threaded so the bottom bracket of the krator fairing would sit flush against the top of the bottom triple tree and the headlight block on top of that. I think it might come out with the fairing to low for the headlight block to be mounted on the top of the bottom triple tree and the headlight might stick out because the bevel is to low, but it’s trial and error process I could be wrong please let me know how it comes out. During the time of the video I was unaware moonsmc sells a headlight block similar to jdcustoms for around 35 easy install just Incase it doesn’t work out but please send us pics if you get it to work 👍🏽✊🏽
@@david93perez nah I don’t think I ever did a follow up bro I can tell u the windscreen didn’t vibrate as much but I’m pretty sure as far as buffering I think the wind would go over my head
I was told that on the 19’ softail I can use the Memphis shades block because my headlight bracket is huge compared to my old bike all the other blocks are too narrow
Just installed on my 2013 FXDB using the Memphis shades block, the wires for the headlamp are stretched pretty tight with the bars at full left. Any pointers on how to gain some slack?
I pulled fairly hard but didn’t want to break anything. I’ll try and pull a little harder before pulling the tank to check for zip ties or something that could be holding it in place.
Thank you very much for this video... I should have searched for it sooner! I was fu¢k!n with it for hours! Finally got it installed after watching this...
What extra steps do I have to do or extra parts do I have to get if I have to relocate my 2002 fxdl head light ? To make this fairing fit ? I want to buy it but I don’t want to jump the gun ... anyone can please help that would be awesome
80 dollars on amazon link in the description we recommend going with the jd customs headlight block I think it’s 65 any should work though will probably have to get extra hardware like us though.
Have you guys experienced any wind buffeting from down under the fairing? Im getting lots of wind coming up from the sides of my tank and hitting me in the face. You guys have any solutions to this??
I had wind deflectors on my '96 Heritage Softail. You may be able to adapt a pair to fit. They worked excellently! The chrome matched that bike, but they could easily be painted or black Plastidipped.
Jo Germain not without some modification that bike has the top mount headlight and the proper way to align the fairing is from the bottom mount triple tree. Is it possible yes will it be difficult I think so.
Jo Germain Im not recommending you to do that but yes it would let u mount the fairing. I can’t speak for structural integrity of the triple tree after u drill it though. I have not done it personally I seen a forum bunch of people said they did it though www.hdforums.com/forum/dyna-glide-models/369522-how-to-drill-into-lower-triple-tree-2.html
Jo Germain make sure the mount on your headlight will fit the moonsmc headlight block idk if the top mounted headlight have a different mount on the actual housing than the bottom mount ones
You had the large gap because you fitted the upper bracket wrong. It goes underneath the triple tree, not on top. Can’t believe you didn’t see that the gap you had was the same thickness of the triple tree.
Josh Lopez to my knowledge the Memphis shades block is threaded and you need a block that is not threaded also I do not know if it will align the fairing to the headlight properly
Any new videos coming up? I was given a crash bar. Looks like yours but doesn't have the holes drilled. Wondering if you would have a tip to drill the holes, to line up for install
Nate Thibeault we couldn’t with the V2h headlight block we were using watch our second install where we do what u just said but thanks for the input ✊🏽
@@dynademos wouldn't say an expert per say. But I have installed a few that were no where near as complicated as you made it. And they actually sit right on the bike.
Mike D have u watched our second install of the Krator fairing? the reason the mounting on this one was different was because of the headlight block we added spacers cause we want the headlight to sit correctly in the bezel dm is pics of ones you have installed and I’ll be impressed
@@rafaelmarquez4490 www.moonsmc.com/products/moonsmc-tsport-fairing-headlight-extension-block-harley and rod is from Illinois I’m from Washington state 🤘🏽
Wrangler Rains We wanted to make a good install video for it we keep seeing jacked up tsport fairings. Originally I didn’t plan to keep it, but I rode with it once and as long as it holds up it’ll stay on my bike I am really surprised by the quality. We will have a review of both fairings pros and cons coming out soon. Do you have a fairing on your bike?
Install is simple only thing make sure u use extra rubber washers to get the windshield away from the fairing mine and rods both buffered pretty bad and took paint off
@@dynademos I disagree, on your bike the headlight is sticking out about 2 in too far it should have a little cowl around it which is the fairing itself.
Doesn't anybody make anything anymore? You could have used a 1$ piece of flat stock and bent it twice. Hammer, vice,drill. I just bought this windshield for my kaw 900 and I know I'm gonna have to make it fit just like I did with my Harley hard bags,ape hangers ect. If the market doesn't support something you want for your bike but it does for another You can make it work with very little skill and tools. That said to mount the hard bags I had to make my own mounting brackets so it required some welding skills but for the most part ......
Question I have a 1998 dyna conv which the headlight is attached to the upper triple tree would I still be able to install this or would I have to buy a extension or relocate the headlight to the lower triple tree ?
Donr3b3l so because there isn’t a mounting hole in the bottom triple tree u wouldn’t be able to mount the fairing without making some bracket or maybe finding some after market bracket but I am not sure if they make one hope that helps
I just got my Amazon fairing in today with absolutely no instructions! You guys saved the day. Thank you!!
Leo Johnson glad we could help 🤜🏽🤛🏽
Life savers. Mounting this kit with modified brackets on a road king and couldn’t figure out what the top two windshield bolts attached to. 👍
Memphis Shades may have updated the headlight block. The one that I just got has threaded holes drilled all the through.
I think you might have the bracket wrong, the one doesn’t go directly under ur bars, it goes under the bolt, on the other side of the triple tree. Thats why you had to use spacers for ur headblock.
Yes we had to install it like this because we didn’t have the correct headlight block but Thankyou!
This is exactly what I was thinking. If you put it underneath. I feel like it would have been the exact gap they had to spacer out. I’m installing right now. Guess I’ll find out. Lol.
Awesome video homies. Do yall know if Plex audio will work with this fairing?
Yes it’ll fit
Thanks for the video fellas. Just going to install one as soon as the new headlight arrives. I got mine from Motea, a German company but they are all the same. It was advertised as fitting a Dyna Lowrider, but it doesn't as you have to put new bars on etc. Anyway, no big deal as I'd bought new bars from AR Harley in Blackpool, UK, they are are really good company to deal with, and I got my Biltwell bars from them. As is always the case, when working with Harleys and houses, double what you think you need to spend LoL! I watched your video on the wiring extension as well keep up the good work.
I can't believe you guys have left this video up for this long.....
Thanks guys, this was the best info on the headlight block.
Best install video on UA-cam
Heck yeah!
This is by far my new favorite channel
MetalWind That’s what we like to hear let us know if you got any ideas of what you would like to see.👍🏽
dynademos , so far you guys are doing some of the mods I have planned. My next mods are Öhlins rear piggyback shocks and I’m upgrading the front end with patriot Suspension springs. Where are you guys from?
I have a 2017 FXDB. I just purchased a set of 2017 fxdls wheels, gonna slap 👋 those on when I do the suspension
We’re in NC and that’s funny you say that we are looking into suspension and are looking at patriot springs and you can’t go wrong with Öhlins.
Right on! I’m from Chicago. Been doing a lot of research on the front suspension, although I would love to get the inverted front end kit for my bike 5k is just way too much. So far I’m leaning towards the patriot Suspension kit. It’s gonna be a sweet setup.
I installed the top bracket under the triple tree to the riser bolts. Brought the whole thing down about an inch that may help that Lego dude.
Don’t take the wrong way, your channel came up first so fitted in similar way. After watching. A few more figments I realised it fits under the triple tree. No need for spacers. Can do on your own in a hour or so. Needs a headlamp extender to make light fit perfectly. Sorry to pee on your fire, not meant with malice and your other stuff is good.
Great job guys. Very informative and helpful 👍🏻
Just subscribed. Good channel, like what you guys are doing. Love the bikes.
Zero Nine Ride Industries thankyou for the support ride safe🤘🏽🤘🏽
that is awesome. thinking about getting one but not available. i am right now riding with the harley quarter fairing
That’s a good fairing too
I must have got the jc customs because I had to go to the bottom side to make look nice. I also bent the mounts for the windshield in just a little bit to make the little bracket sit flush and didn’t have to find longer bolts.
Thanos Etsitty in the end of the video we explain why we had to use longer bolts
Top fairing mount bracket goes on bottom side of top tree. That way, bracket id hidden and longer bolt for headlight mount is not required. You made it more difficult and looks like crap.
bobberguy1 we explain why we did it like that we didn’t have a tsport headlight block but in our second video we did it exactly how u described
I was looking for someone to point this out. I've never seen it mounted to the top of the triple tree
So I watched another video on UA-cam and he puts the top bracket underneath the the top triple tree and not on top like you guys have it..his headlight is flush too..what’s the right way to do it?
Nowhere for an extension block on my 02 super glide. Hellllp
Hi guys
Thanks for the video
Can you tell me what is the height of the smallest clear windshield on the 2 black dynas
9 ‘’ 12 ‘’
Thanks
What do I need to do for my 2005 SG? Has a top mount I think.
why did you mount to the top of the triple tree rather than below it?
subbed, very comprehensive videos guys! ill be using them in the future for sure 👍
Thank you! we try not to skip steps and make good quality videos✊🏽
Thanks for the vid. What light bar are running?
Del Stream moonsmc support small businesses🤘🏽
@@dynademos did you guys have a link for the bar?
whats up this is the salesman yall met at Harley of Greenville i still want them bags
can you use the krator fairing with stock handlebars on a 2017 Dyna FXDL ? I will change to the lucky 13s but I need a fairing asap.
Just mount the upper bracket under the yoke ( tree to you Americans ) and modify the headlight bracket / block to fit, looks far tidier than jacking the fairing up like you have. Or hell by a different block there cheap as chips.
crewgadjy watch our second video or watch the entire video we explain everything u just commented 👍🏽
Hey just wondering if this situation you guys had to do with the installation would be the same for my ‘18 (softail) street bob FXBB by chance? Now that it’s a softie.
Bought same fairing, Did anyone else's fairing have a couple dimples on either side of the headlight?
Dennis Mudd I did not
Is there more than one model krator fairing? Is the t sport and regular fairing the same ?
Got my Krator fairing installed with the Moonsmc headlight extension block on my dyna low rider s.
What torque spec did you guys use for the handlebar bolts underneath? I seem to be finding on forums about 30-40 ft lbs, does that sound right?
Zach Peeler don’t have it in front of me man if u hit me up on insta and remind me I can look it up in my manual and get back to u
dynademos awesome will do thanks
Is right
Mine does not look like that after I was done lol hmmmmm🤷🏼♂️🤦🏻♂️
Thanks for the great vid guy’s
Always Thankyou for the support!
Awesome job guys. Couldn't make it any easier! Question. Any idea how to mount it to a 2012 Street Bob with the riser already cast into the upper tree?
Grant Brunsvold u might be able to make it work but not sure exactly prob need an aftermarket bracket
@@dynademos Thanks. The only way I can see it working is to mount it to the forks, like a Memphis shades or Conley's. There is no place for a mount on the upper tree.
Grant Brunsvold yeah I am not a fan of the built in risers your probably the 4 th person that has hit me up about them they make everything more difficult lol
@@dynademos ha! They do indeed! I hate them as well. Think I'm gonna change my upper tree out and be done with it.
Grant Brunsvold yeah have u priced out a new upper ??
Do you need T bars for this fairing?
Just flip the bolt and the washer will give you the space you need on that windshield bracket
I wish you all can come up with how to install fairing on 20 low rider s video
Haven’t worked on one yet sorry
I feel like the top bracket is upside down. If it was flipped, would the lower bracket be in the proper spot on the triple tree?
We didn’t have the correct headlight block so we mounted it the way we did we have a second video
Saw the moto vlog 4. Did yall end up going under the top triple tree?
Bradley Poston yes, we got a video of us doing the reinstall.
I have the stock dyna low rider headlight block which is vertical. Do I need a relocation for the headlight to sit flush?
Carolina Dyna yes if u don’t get it your headlight will sit inside of your fairing
@@dynademos alright I ordered a memphis shade block. I'll just drill it. Where are you guys at in NC? I'm on the NC/SC border near charlotte
The other side close to the ocean near Wilmington 😂
Carolina Dyna u can definitely do that with the Memphis shades just mount the top brocket on the top side of the upper triple tree and the block on the upper side of the lower triple tree should sit flush in there
@@boozefighterheybuddy6532 near South of the Border?
I have an Arlen Ness headlight block. Krator fairing en route. If I mount the top bracket to the underside of the top triple tree between the bolt head washer and riser bushing washer will it work? Your thoughts on that one please?
If I’m not mistaken that block is threaded so the bottom bracket of the krator fairing would sit flush against the top of the bottom triple tree and the headlight block on top of that. I think it might come out with the fairing to low for the headlight block to be mounted on the top of the bottom triple tree and the headlight might stick out because the bevel is to low, but it’s trial and error process I could be wrong please let me know how it comes out. During the time of the video I was unaware moonsmc sells a headlight block similar to jdcustoms for around 35 easy install just Incase it doesn’t work out but please send us pics if you get it to work 👍🏽✊🏽
How’s the abs fairing holding in a long ride? Curious cuz I need a facelift for my streetbob?
Neilsen Marquez we have a review of it if you’re interested 1500 miles later still going strong 👍🏽
dynademos are you guys both using kratos?
Neilsen Marquez no rod has a villain 2 hero fairing
TOTAL GARBAGE THESE ARE $80 CHINESE FARINGS COME ON
Hey brother, did you ever do a review with the JD customs anti buffeting kit?
Yea just look up anti buffeting kit
@@dynademos oh I did. But did you ever do a review after installing the kit? I ask because in the video you mention you might end up doing that
@@david93perez nah I don’t think I ever did a follow up bro I can tell u the windscreen didn’t vibrate as much but I’m pretty sure as far as buffering I think the wind would go over my head
So is the best
block to use the moonmc kind?
Good vid. What do you use for music? Like that intro song
Whiskey n Cash I find copyright free music on UA-cam and use that
Cool video guys.. I had a bitch of a time installing it on my 19’ street bob.. mine mounts to the top just need a headlight block now
DudeItsShags yeah we had hell of a time too lol. what headlight block you going to go with for that?
I was told that on the 19’ softail I can use the Memphis shades block because my headlight bracket is huge compared to my old bike all the other blocks are too narrow
DudeItsShags oh okay yeah I’m not sure about that bike. Please let us know what you end up doing though 👍🏽
So the krator fairing fits on the 2018+ softail street bobs?
What did you do to get it to fit on your bike
Can I run this kind of fairing with clamps only? My bike is dyna streetbob 09 with cast triple tree riser setup
As far as I know no one has mounted clamps to this just cause the akward mounts but there are other tsport style fairings u can run
Just installed on my 2013 FXDB using the Memphis shades block, the wires for the headlamp are stretched pretty tight with the bars at full left. Any pointers on how to gain some slack?
Reach in the neck of the bike and pull slack out there is more than enough
I pulled fairly hard but didn’t want to break anything. I’ll try and pull a little harder before pulling the tank to check for zip ties or something that could be holding it in place.
@@onwhim487 my bet is it’s tangled up in there pretty good maybe the connector is locked sideways in the neck
Thank you very much for this video... I should have searched for it sooner! I was fu¢k!n with it for hours! Finally got it installed after watching this...
glad we could help!
What extra steps do I have to do or extra parts do I have to get if I have to relocate my 2002 fxdl head light ? To make this fairing fit ? I want to buy it but I don’t want to jump the gun ... anyone can please help that would be awesome
Kelvin Rivas hit us up on Instagram I’ll send u a link
dynademos fuck I don’t have one what about email ?
I’d really appreciate you sending that link if you could ! That’s my email 📧 thanks a lot dyna demos I appreciate you guys
Kelvin Rivas www.jpcycles.com/product/406-483/drag-specialties-headlight-mount-black?&mrkgadid=3300286549&rkg_id=0&Google+Shopping++Generic+-+Lights+and+License+Plates&product_id=406-483&adpos=&creative=278867792813&device=m&matchtype=&network=g&gclid=EAIaIQobChMI2qH4zpqf5wIVCYizCh0lYQ_3EAQYAyABEgIxQPD_BwE&gclsrc=aw.ds
Kelvin Rivas checkout the link
Great video guys👍👍👍👍
Tripp_HPjunkie thanks man really impressed with this fairing
@@dynademos Ive also heard good things how much did you end up paying for it and where did you get it? Thanks
80 dollars on amazon link in the description we recommend going with the jd customs headlight block I think it’s 65 any should work though will probably have to get extra hardware like us though.
Also idk how tall you like your windshield it comes with a 15 in I think I personally don’t like it and plan to try to cut it down
do you need that headlight mount to run that fairing,
Anthony Siracuse we run the krator fairing with the moons Mc headlight block
We’re in North Carolina came from so cal though
He asked do you NEED IT and I'm wondering the same thing
Josh Lopez If u want t to fit correctly yes
I need help my bike doesn’t have the hole in the triple tree to mount the block what should I do?
Cody Niven sounds like You have a top mount headlight, you need an adapter
The bracket sits under the triple tree not ontop then there is no need for any spacers
look like the windshield got a crack after you install the screw
yannprimero the krator fairing windscreen didn’t have a crack till just recently made it about 8k miles
I installed the Krator windshield in my 2013 Super Glide, but the sides touché the tank when I turn the handlebar all the way. Does it happen to you?
kanudoss no u probably need to push the fairing as far forward as it can go and make sure u are using the correct minting holes for the fairing
@@dynademos thank you. I'll try
Do you think it will fit on 2005 Harley davidson fxd Dyna super glide??i need this fairing so bad😀😀😀
MARET/OCT if it has the top mount headlight u can get it to fit but u will need to do some modifications won’t be a direct fit
So i have this fairing but im having doubts as to whether or not it fits my wide glide
My buddy has it on his wide glide
Have you guys experienced any wind buffeting from down under the fairing? Im getting lots of wind coming up from the sides of my tank and hitting me in the face. You guys have any solutions to this??
Justin Anderson unfortunately I dont think there is much u can do if the wind under the fairing is bothering you maybe a different fairing?
I had wind deflectors on my '96 Heritage Softail. You may be able to adapt a pair to fit. They worked excellently! The chrome matched that bike, but they could easily be painted or black Plastidipped.
2008 they used cast riser triple trees, do I need to buy a new upper tree?
The top bracket wouldn’t have anything to clamp onto sure u could get it to work but yeah I’d recommend a new upper clamp would be revommended
Yeah you have to get a new upper triple tree. Just changed mine to put in risers and this fairing
Andrew Faraon u got an IG with pics of it? Kinda dying to see how it looks lol
Nice videos. I eas wondering if its possible to fit the krator fairing on a 2003 fxdx . Thank you
Jo Germain not without some modification that bike has the top mount headlight and the proper way to align the fairing is from the bottom mount triple tree. Is it possible yes will it be difficult I think so.
@@dynademos if i drill the botom triple tree and use the moon mc headlight it you be okay ?
Jo Germain Im not recommending you to do that but yes it would let u mount the fairing. I can’t speak for structural integrity of the triple tree after u drill it though. I have not done it personally I seen a forum bunch of people said they did it though www.hdforums.com/forum/dyna-glide-models/369522-how-to-drill-into-lower-triple-tree-2.html
Jo Germain make sure the mount on your headlight will fit the moonsmc headlight block idk if the top mounted headlight have a different mount on the actual housing than the bottom mount ones
Jo Germain hope that helps be safe✊🏽
How tall is the windshield that comes with the kit? Thanks.
Not sure off the top my head sorry
Well done! Thank you.
Very helpful, appreciate it
Glad it helped !
You had the large gap because you fitted the upper bracket wrong. It goes underneath the triple tree, not on top. Can’t believe you didn’t see that the gap you had was the same thickness of the triple tree.
I can’t believe u didn’t finish the video where we explained why we did this but Thankyou
I didn’t see it because I switched off. You should have explained that while you was doing it. I can’t believe you didn’t 😆
Anyone know of these or any other budget fairings will fit my 07 Honda Shadow ? I cant find much of anything .
Buy a harley.
Can you get a plex in there
The Memphis shades block doesn't work at all ???
Josh Lopez to my knowledge the Memphis shades block is threaded and you need a block that is not threaded also I do not know if it will align the fairing to the headlight properly
Do you know if u can use the quick release clamps with key . For easy remove?
Joey Perez not without modification of the existing brackets might even need to make a new one. The clamps would not install directly onto it
Any new videos coming up? I was given a crash bar. Looks like yours but doesn't have the holes drilled. Wondering if you would have a tip to drill the holes, to line up for install
Btw. Loves the videos, shout out from Cali..
Another question. One of u have the light bar. Couldn't find a video if urs , how to... anyway you guys can make one?
Joey Perez yeah I want to make a how to it’s just mines already installed and I don’t wanna have to remove and reinstall
isn't it too high?
Is there away i can get this fairing to fit on my 2016 iron 883?
Marcele Saunders it could probably be done but would most likely require modification.
Thanks guys.
juan z thanks for the support ✊🏽
What about the spacers, where can i get that
Jd customs
do u need a headlight block for this install
Chensin San ua-cam.com/video/8u1Hw2s0u_Y/v-deo.html
How did you drill the hole on the bottom triple tree?
I later model dynas came with a hole in the bottom triple tree
@@dynademos figured I have 05 lowrider with top headlight mount trying to figure it all out
@@austinspivey2887 top mounts r dope dude!
@@dynademos would I have to relocate my light to make this work?
9:20 SEAHAWKS!!!!!🔥🔥🔥👍👍💪
K Yaz Pacific Northwest 🤘🏽
Make and model of the light at please. Thanks
Moons mc flyeye
What were the torque specs for the handlebar bolts ?
Refer to the manual homie and if u don’t have it I’ll dm u on insta when I get home of the torque spec for my bike just shoot me a message
My manual says up to 40NM chum
If you would have put the top bracket on the bottoms of the top triple tree you wouldn’t of had all the spacing crap to deal with.
Nate Thibeault we couldn’t with the V2h headlight block we were using watch our second install where we do what u just said but thanks for the input ✊🏽
Has anyone experience windshield rattling at low speeds in first gear? Need to find a solution for this, it's very annoying
jws jws make sure everything is tight nothings rubbing
Holy crap that's not how it goes. Lots of work for a crap install job.
Mike D I’m sure you’re e the expert
@@dynademos wouldn't say an expert per say. But I have installed a few that were no where near as complicated as you made it. And they actually sit right on the bike.
Mike D have u watched our second install of the Krator fairing? the reason the mounting on this one was different was because of the headlight block we added spacers cause we want the headlight to sit correctly in the bezel dm is pics of ones you have installed and I’ll be impressed
@@dynademos sent you a dm on Instagram of a stock fxdl install with the orginal risers ect.
Yep the main bar bracket is flipped sits perfect , no need for headlight riser
Will this fit a 2003 night train?
tagatamawan with a headlight block and u may have to do some fabrication of the fairing
Will this work on a super glide
if it has a bottom mount headlight yes
Every other video shows the upper bracket going under the top triple tree
I have a fxdl you think it will fit?
Rafael yes should be the same install procedures
@@dynademos can you give me the link for the block for the headlight I can’t find it and thanks for the reply... where you guys from I’m in Chicago.
@@rafaelmarquez4490 www.moonsmc.com/products/moonsmc-tsport-fairing-headlight-extension-block-harley and rod is from Illinois I’m from Washington state 🤘🏽
@@dynademos okay 👌
Why V2H to Krator?
Wrangler Rains We wanted to make a good install video for it we keep seeing jacked up tsport fairings. Originally I didn’t plan to keep it, but I rode with it once and as long as it holds up it’ll stay on my bike I am really surprised by the quality. We will have a review of both fairings pros and cons coming out soon. Do you have a fairing on your bike?
dynademos I currently run a quarter fairing, but want a T-Sport. Looking at the V2H.
Install is simple only thing make sure u use extra rubber washers to get the windshield away from the fairing mine and rods both buffered pretty bad and took paint off
dynademos will you all do a review of the V2H in terms of quality and such?
Wrangler Rains yes it is in the works we got a couple projects but everything we install we will do a follow up review
You guys aren’t worried about bolts potentially bending from mounting that bracket directly under the bars?
Nah never had an issue
What the hell about with a stock Harley headlight?????
What?
@@dynademos I meant to say what the help on the stock headlight is it any diffrent hook up to the triple tree or to between the bars and tree ?
@@gagecannon7781 mount the bracket to the bottom side of the upper triple tree you will need a tsport headlight block
God damn i hope people aren't making their headlights bug eye out their fairings like you did lmfao
🤦🏽♂️
What does krator say about their faring been so fucking difficult to install?
Prob nothing it’s a Chinese company pretty sure
I got my quarter fairing without a bracket or bolts. Is that normal?
Quarter fairing no idea this is the tsport but it comes with brackets and hardware
Your headlight is sticking out too much, it looks better if it is recessed an inch or two.
Lol no that’s when u install it wrong
@@dynademos I disagree, on your bike the headlight is sticking out about 2 in too far it should have a little cowl around it which is the fairing itself.
@@TheHomeExpert5 look at an oem tsport dog
@@dynademos I'm just telling you what looks better, it looks much better when the headlight is slightly recessed then sticking out like you guys have.
@@TheHomeExpert5 ehhhh🤷🏽♂️
Doesn't anybody make anything anymore? You could have used a 1$ piece of flat stock and bent it twice. Hammer, vice,drill. I just bought this windshield for my kaw 900 and I know I'm gonna have to make it fit just like I did with my Harley hard bags,ape hangers ect. If the market doesn't support something you want for your bike but it does for another You can make it work with very little skill and tools. That said to mount the hard bags I had to make my own mounting brackets so it required some welding skills but for the most part ......
To answer your question no
@@dynademos haha
Just so y'all know its villain 2 hero....as in villain to hero.
Brad Gray is that not what we said ?
help full asfck
Just Sub
Yea you goofs did NOT install the fairing correctly. Smh.
This is put together wrong
Ok dude watch the video we explain why we installed it the way we did
Question I have a 1998 dyna conv which the headlight is attached to the upper triple tree would I still be able to install this or would I have to buy a extension or relocate the headlight to the lower triple tree ?
Donr3b3l so because there isn’t a mounting hole in the bottom triple tree u wouldn’t be able to mount the fairing without making some bracket or maybe finding some after market bracket but I am not sure if they make one hope that helps
Will this fit a softail night train