HOW TO INSTALL ELECTRIC AND INDUCTION COOKTOP
Вставка
- Опубліковано 1 сер 2024
- In this video I will show you an example on how to install your electric or induction cooktop. It's not that hard. Anyone can do it!
A list of DeWalt Reciprocating Saw to chose from:
Corded 120V
amzn.to/3XEFy9U
amzn.to/3ueCOTb
Cordless 20V
amzn.to/3H1Qfxs
amzn.to/3ilUKIR
amzn.to/3VwIaoy
Donation to support my channel running:
www.paypal.com/donate/?busine...
Want to buy me a cup of coffee? :) www.buymeacoffee.com/kevinpon
Want to EARN FREE money while shopping online? Over 2500 stores.
SIGNUP BONUS when you use my link. Join NOW and receive $30 when you spend at least $30 before taxes! Must be done within 90 days of signup.
FOR USA receive $30USD
www.rakuten.com/r/KEVINP1127?...
FOR CANADA receive $30CAD
www.rakuten.ca/referrer?refer...
Try Amazon Prime 30-Day Free Trial
amzn.to/3FmTMoT
Give the gift of Amazon Prime membership
amzn.to/3P3r1kq
Want to EARN THOUSANDS per month as an Airbnb host? Sign up with my link: www.airbnb.ca/r/kevinp11750
Hungry? Get $10 off your first 2 Uber Eats orders of $20 or more.
Use my code at checkout: eats-kevp546ue
ubereats.com/feed?promoCode=e...
DON'T forget to LIKE this video and SUBSCRIBE to my channel!
Hole size cut for ventilation please refer to your manual 🙂
*DeWalt Reciprocating Saw to chose from:*
Corded 120V
amzn.to/3XEFy9U
amzn.to/3ueCOTb
Cordless 20V
amzn.to/3H1Qfxs
amzn.to/3ilUKIR
amzn.to/3VwIaoy
Regards the counter top cut out - the reason for rounded corners is to avoid stress point where a crack can form (that's why airplane windows are also rounded) - this is a point for consideration when cutting your opening or giving sizes to those providing the counter tops
Great video, your lack of fancy outfits and tools makes me confident I can install one in my home...)
thank you for the great and simplified
video....!!!
Thank you very much! It's not as hard as it seems. Be confident. You can do it! 🍻
Thank you! And thanks for including troubleshooting tips. A big help!
You're very welcome! 😁🍻
Excelent detail and instruction with all of the necessart precausions. Thanks.
It was my pleasure and thank you for the feedback 😁🍻
Very clear instructions! I subbed! Thanks!
Thank you Wanda!! 😊
Very good video you really explain the wiring electrical part very well
Thank you Tyrone :)
Thank you! Truly helped a lot!
My pleasure 🙏🏻🍻
Thanks for walk me through ❤
You are most welcome! 🍻
Thank you, very helpful!
My pleasure! 🍻
Great video and info bro👍👍thanks for sharing
Thanks bro!!
Thanks for your video mate. I will start look for my new induction cooktop.
My pleasure mate!
Is the cooktop resting on the Glass or the 8 plastic pieces/tabs, because if the cutout is 1 inch bigger, then these tabs can't hold the cooktop, and a lot of pressure will be on glass surface, it might break.
Thanks
Hello. Hopefully you can help. I'm installing a cook top and wanted to substitute the wires it comes with to a 3 prong range cord. I'm clear about connecting the two ends to the black and red, but not sure how the middle would connect, i.e. To where the ground is or somewhere else.
👋 hello, the ground wire must be connected to bare copper or a green wire. If it's not there then it's not correct. You must have the correct parts 🍻
Great video! What size cabinet did you install the cooktop in? I bought a 36inch cooktop and was wondering if it could fit in a 36inch cabinet. thanks
Thank you! My cabinet is 36"x22" interior working space. My cooktop is also 36". It should fit 🍻
There is a piece at the back of the cooktop. It is short and affixed by one screw but it does have the two fins which have an angled area. I suppose when installing this will help push the back center forward. Did you remove this piece?
Hi Eric, my cooktop doesn't have that piece that helps to push it forward. But it's not a requirement to have. It just to help you align the cooktop. 🍻
I'm replacing a plug in stove with a cooktop like this and a wall oven belowit. Can I convert the current plug in box to be used for hardwiring these two appliances or will reach one need it's own box?
Hi Hillary, if they are separate units. Then each appliance will need it's own circuit. So you will need to separate box 🍻
Hi Kevin - thanks for this video:) Wondering what model of Bosch cooktop this is? Also, looks like your cooktop came with AWG 8/2 wiring and I see you have a 40A double pole breaker, so I assume the cooktop has an amperage of 32A max given the 80% rule. What is the AWG gauge of your wiring to your power panel? Thank you
Hello there! You're very welcome! The model I have is discontinue but it's: NIT8668SUC
Yes, you are correct. For 40A, you will need #8 gauge wire 🍻
Before connecting, use a meter to ensure the breaker wasn't mislabeled.
Is there a worry with heat disipation beneath the cooktop? Worry of fire, etc. with heat build up below the stove?
Not to worry. With enough air circulation you will be fine. Plus there's safety auto shutoff function in cooktops making it very safe 🍻
I just installed my induction cooktop, but there is a small gap between the counter and the cooktop, what should I use to seal it?
Install foam weather strip on the cooktop along the edge and then put the cooktop back in the cutout 🍻
I noticed your source wires are copper, and the ones from the cooktop are not copper, maybe aluminum? I remember reading that there are special steps needed when connecting two copper and aluminum, or is it ok just to use the twist caps? thank you!
It's ok just as long the wire size is correct according to the amparage on the supply side 🍻
A good electrician will always twist the wire together and then put on the wire nut. Wire nuts manufacturers say twisting wires together is not needed however their sales pitch is tailored to the speed to connect. Having a solid mechanical connection by twisting the wire first and using the wire nut mainly for insulation with the additional mechanical strength of twisting on a wire nut makes for a better job.
I usually just tighten the wire nuts tightly until the wires twist together then give each wire a tug test. I am a licensed electrician. Most electricians I work with do the same.
When you take off the wire nut... you'll notice the wires are twisted together.
What's the name of that DeWalt jigsaw/reciprocating saw you are using? I'm looking for it to cut a hole in my countertop and the search menu needs a specific tool name. Thank you.
Here's a few I've listed for you to chose from:
amzn.to/3XEFy9U
amzn.to/3ueCOTb
amzn.to/3H1Qfxs
amzn.to/3ilUKIR
amzn.to/3VwIaoy
Cheers!
You can start off with drilling a hole with a hole saw to get a corner started
What are the disadvantages of installing it like this. I am worried about ventilation, insects staying below it and the pressure on the sides of the cooktop since that's what's holding it down.
Hi Dominique! If you're worried about ventilation, all you would have to do is have the entire bottom opening opened. The unit's weight and gravity holds the unit down in place. It can't jump out. I've had this unit up for years and still works like new. 🍻
What happens if one of the burners goes bad ? Can I replace it ? Do I need to caulk the borders to prevent water damage?
Yes it can. A year ago, I had one side of the burners replaced by a technician. If yours did not come with seal foam tape along the edges then I would put that. You could caulk it but if you ever need to replace a burner, it can get messy removing the caulk. Seems like a hassle to remove, clean and reapply. 🍻
I'm not an electrician but I'm curious of the 3 wires. And Is it possible for an induction cooktop to be powered by 120 volts? If so, what wires shall this be connected? Thanks
Hi Reno, sorry there is no such cooktop that can be powered by 120V. It has to be 220-240V. Only portable induction are 120 volts. Good question though. 🍻
@@KevinPon. Thanks Kevin...it's very informative.
The black and red each has 120 volts. Therefore when combined you receive 240 volts in total.
Just came across this issue myself, luckily I had a tester, the white wire supplies 120V and the Red one 240V, it is very important to clarify this, and not potentially damage the cooktop.
6:00 In Europe 220-240V a 32A MCB and AWG9 =6mm². Or two hot phases 16A MCB 2x AWG13 =2.5mm². Typical power 7200W
Armored cables are not necessary in Europe, we use ordinary PVC cables. And a insulated box.
Wirenuts are not allowed in Europe. We use screw terminals or WAGO terminals.
WAGO is installed very quickly and is approved for up to 40A at 400V.
WAGO's are the best!
do you think it's safe to put a dishwasher under the cooktop?
I've never seen it done before. Probably because there's not enough room for air ventilation for the unit to cool down 🍻
Hi , does the circuit breaker an 20+20amp for red+black wires? Thanks a lot!
Yes, a "double pole" 20 amp breaker 🍻
Thanks. Also, is that 120v+120v?
Yes, each pole is 120V each =240V potential difference
@@KevinPon. I just checked your video again, it looks like a doubles pole 40Amp circuit breaker?
@@YSCDIY install what's required by your device and also with the correct wire size accordingly🍻
You think skipping the brackets is alright? Cooktop is fairly heavy and there is rubber tape around the corners.
Yes, you'll be fine. The brackets holds the unit so it doesn't shift. When you can't install it, there's not much you can do. My unit is still fine from the beginning 🍻
Can the electric circuit of the induction cooktop shared with the oven? Also is it a bad idea to install an oven under the cooktop?
Hi Anthony, it is code that each have it's own circuit. If you have both on one circuit it will overload the breaker. I never seen it done before in any houses I've been to. It's possible but there's a chance if both are running at the same time the cooktop can get damaged from over heating 🍻
Hey do you still like this cooktop and would recommend?
Hello, the cooktop I have is discontinued. It is good BUT I think there's a defect with the one I have. The two left side small induction burner they turn off automatically when I'm cooking and pops up a error code. I'll need to check if it can be fixed under warranty. Other than that it's great!
@@KevinPon. ooo it's not his one? www.bosch-home.com/us/productslist/cooking-baking/cooktops/induction-cooktops/NITP669SUC
Looks almost identical. Thinking about buying it today actually lol
@@audan-qg4zm they all look very similar. The one I have is NIT8668SUC. Lol nice! That one looks cooler!
can the cooktop carry the weight all by itself? no bracket required ?
The bracket is so the unit does not move left to right or front to back. The unit itself is heavy and with the sealant strip underneath all along the edges. It is very hard for the unit to move. 🍻
@@KevinPon. sorry my question is the cooktop is sitting own its own by the edge of top glass panel. doesn't it need some sort of support at the bottom as the weight?
Nope it does not. I know it can be scary but the way it's designed it's supposed to hold up it's own weight. If the cooktop is made with hanging brackets to support the unit then it should be used 🍻
Can i install a stove on ply wood?
Never seen it done before but it's do able.
Wires should always be twisted together at exposed tips prior to putting on wire nuts to ensure proper contact.
No just no
And then add a bit of electrical tape if your going to use shiesty connectors. Ty.
What is the length of the cooktop power cord?
I think 1 meter. Standard.
Thanks, The power cord is too short, I want to buy it but I'm afraid of the power cord won’t reach the outlet.
@@thi-nnguyen8588 Then you install a new electrical box that will reach the connection from the cooktop, then bridge that box to the box that has your power. Make sure you do it to code, but not at all difficult.
Correct me people but I think u have to use white wire along with ground ? Tight them all 3 together ?
Negative. You never mix colors.
I couldn’t get the brackets to work either. Anyone run into problems if you skip the brackets?
I've been using mine for over two years now and I have zero complaints. My unit didn't move one bit 🍻
we are chinese induction hob/ceramic hob factory, is there any chance to cooperate?
Yes, please email me at kevinponbusiness@gmail.com
Why is the white/neutral cable there if you don't really need it ?
The electricians pull wire to a cooktop is always 3 wires and a ground. Depending on the cooktop it may or may not need the neutral wire. If the cooktop doesn't need the neutral wire because it purely uses 240V US/CAD. If the neutral wire is being used then 120V is needed 🍻
Good question 🍻
Can you hook the neutral and the ground together? Or just leave it capped?
Hi there, do not put them together. It's against code. Put a cap on each end 🍻
So this is a 1 fase cook top?
Correct. 1 phase 220V - 240V depending on country
I wish you could just plug it in like other stoves 😂
Wouldn't that be nice 😂
So you don’t clamp it to the counter ?
If you can't. It's not the end of the world. The cooktop is heavy. It will not move or pop out
Why do these install videos not show how to secure the cook top to the quartz or granite countertops? The glass will eventually crack if not properly supported by brackets.
Hi there, as I've mentioned in the video. The reason I didn't install the brackets was because I couldn't. There was no space due to the limited space in the cabinet. The brackets are to stop the cooktop from moving not to prevent the glass from breaking. Thank you for watching 🍻
Why didn't you put the electrical tape around the earth wires?
Hi Mary, it's optional. It's also optional to put electrical tape on the other three wires. I know they will never come loose cause it's tighten super tight. But it's extra reassurance since those wires are energized. Cheers!
not good connection of wires. some cooktop rated at several kw, at current 15a-30a at 240v, there'll be heat generated at the twisting connection and may cause fire! Better to solder the connection and secure it properly.
I've been doing this all my life. No problems. If you properly splice the wires together, there will be no issues 🍻
You should seal the cookbook to the counter in case any spills happen. That way moisture will not leak onto items stored below the cookbook or travel down the conduit into the electrical box and cause a dangerous short.
Thank you for the tip. The cooktop I have already has a sealant strip underneath. The cooktops I've seen, new one anyways all come with one preinstalled seal strip.🍻
@@KevinPon. Was about to ask you this. Thank you!
@@KevinPon. if not what do you seal it with?
Thin weather strip 🍻
You're never supposed to seal the cooktop with anything other than what's supplied. If nothing is supplied, don't seal. It's all part of ventilation
Why it simply does not use an electric outlet like stoves do?
I think to cut cost for the company. But you could convert the end so it's like a range plug 🍻
So this one is a 120v connection.
This is 240V.
I meant "cooktop"!
😂 yes!
why are you installing a cooktop under a water facet?
It's a pot filler. A luxury addition to a home. I didn't believe it too when I first heard about it. I thought it's was against code but it's all fine and dandy 🍻
Electricians don't like when you put electrical tape on wire taps
Personal preference 🍻
Why?
@@raymondeffinger3647they assume it was done wrong and they need to thus assume everything in the house is wrong.
Don’t do it like this, he didn’t even insulate it. If he spills it will rot the counter top
New cooktops comes insulated. Well at least mine was. Thanks for watching!