Mazda Monday! Best Mods for under $150
Вставка
- Опубліковано 17 жов 2024
- Removal of emission equipment is for off-road use only 😶
Skyactiv-G Mazdas Years 2012-2024
1.5L 2.0L 2.5L 2.5T use DILKAR8A8 Spark Plug Upgrade ~$58 with a discount code
www.sixityauto...
Mazda 2/Toyota IA 2016-2022
Fab9 Fuel Pump
2016- 2023 Miata
Fab9 Fuel Pump
2012-2018 NA Mazda 3
Fab9 Fuel Pump
2019-2024 NA Mazda 3/CX-30s
LC500 Fuel Pump
2021-2024 Turbo Mazda 3/CX-30s
LC500 Fuel Pump
2023-2024 NA CX-50
LC500 Fuel Pump
2023-2024 Turbo CX-50
LC500 Fuel Pump
2016-2022 CX-4
Fab9 Fuel Pump
2014-2022 NA Mazda 6
Fab9 fuel pump
2018-2022 Turbo Mazda 6
No plug & play replacement
2022 Mazda CX-3
Fab9 Fuel Pump
2013-2024 Mazda NA CX-5
Fab9 Fuel Pump
2018-2024 Turbo CX-5
No plug & play upgrade
2016-2023 Turbo CX-9
No plug & play upgrade
Fab9 pump~$72 with discount
Code Fab9save
fab9tuning.com...
LC500 pump~$50 used
www.ebay.com/i...
ND1/2Miata hoses~ $60
www.jamesbaron...
NA hoses except ND1/2~$27 with discount code
Code Panda5
mikstoreph.com...
Cost $135 total for a 4th Gen to do these modifications which will lead to the best performance especially when combined with a tune. A tune is not needed to do those modifications BTW.
You can’t even buy a new intake for that low of a cost!
Can’t wait to see the results of your testing !!!
Me too
Great vid!! I know this is off topic from the video discussion, but are there any required upgrades to other parts to install the vt supercharger? My car is a 2017 Mazda 6 GT
@@bthan4800 DILKAR8A8 spark plugs
Thank you for the vids man been watching for a while, question on the cat "delete" if there is any audible difference, thank you.
@andrewkarpekin7033 small difference when the rest of the car is stock. Sounds better not really louder
Just ordered a fuel pump, I also shelled out the money for an injen CAI. About 30k miles ago I installed ruthenium spark instead of iridium, should I still opt for GTR spark plugs?
@antoniodelatorre731 I personally like the double iridium vs. the ruthenium. I have used both
Just found your channel, awesome build! I have a 2022 Mazda3 MT that I'm trying to decide on power upgrades after I upgrade all the differnt suspension components and get some light-weight wheels. I'm happy to see this kit is holding up.
Have you seen mikstore has a bunch of cf hoods now? You considering getting the oem one and dropping all that weight from the oem? You could paint the exterior of it to maintain the sleeper build
@babblingSponge I'm keeping the stock hood. There's maybe a 12lbs difference. I can't justify $1k for that
@@supermazda3 I was looking for more detail because 12 pounds doesn't sounds right for how heavy the oem hood is.
The only hood I see them give a weight figure on is the "KODO" hood, mostly made of FRP with just that CF inlay. Were you able to get more information directly from mikstore?
Wouldn’t it be easier to go to a shop to completely remove the 2nd cat and replace it with a same size exhaust tube ?
Yes, but it ain't gone be as cheap and many shops won't do it. I had a shop do mine
hi Justin, I have a Mazda 3 2.0na, will apply the mod u suggest. For the air intake, do you think ram air intake system is much better than a k&n drop-in air filter? maybe drop-in air filter is enough? i deleted my second cat, and i use Flowmaster super 10 series single chamber muffler... final target is to have the VT twin screw supercharger...
Probably the stage 2 burger motorsports intake
@@mrluistito2529 i think yeah, just see Justin's video, he has an open pod intake and lower part of the stock air box
@@DerickHo I have the Corksport sri with heat shield box.
I wanna install something that directs cool air into it though.
@mrluistito2529 dont we have it alrdy? The stock will hv cool air pull while the car move
My mz3 fwd NA has charcoal del, K&n drop in, and corksport cat back, and would like some power. Do you have a tune for more power
Yes, email me at justin@g-sauce.com
Is the LC500 fuel pump confirmed to not fit on a 2020 6 turbo, or is it just untested at the moment?
@@feline6789 it doesn't fit
Been reading about some people taking thier stock airboxes and removing the lower resonater half. This apparently helps with airflow, and also gives the engine more sound. Those with the turbo said it gives it all those sounds that the SRI would give, like the blow off sound, ext.. However, others chime in and say its not worth because its now pulling in warmer air and reduces performance. Curious if you have seen anything about this mod, or have any thoughts! Its a lot cheaper (free) then buying an SRI kit lol
Leave the resonator on there's hot right below due to the radiator
@@supermazda3 makes sense. I was thinking about trying it on mine, but I have a turbo and there's actually no resonator at all on my air box. An aftermarket cold air intake is really my only choice if I'm chasing for engine sound without losing performance. I'm thinking I'll just fabricate my own in the shop though, 250+$ for pipes and filters is crazy to me!!
Im looking to install lc500 on a skyactiv X. What should I look for before installing?
The key to remove your low pressure gas tank cap. Make sure you do it when you’re low on gas like 1/5 of tank left.
Or you will get gas
Everywhere…
Ir should be exactly the same
Genuine question, what would the benefits of these be without a tune? I'm attempting not to void my warranty just yet lol
@SeonTheNeon yes that works! That's what the next video is about
@@supermazda3 awesome, looking forward to it man
I wonder if i can put a miata valve cover on my 3 2.5 they look way nicer then that plastic cover i have
@@3rdGenMz3 let me know if you try it haha
hi, i was just curious about the mods i can do to my 4th gen 2.0 fwd, currently have a drop in k&n and pre silencer and silencer delete, im thinking about making more power without a tune, what do u recommend for the engine size and conditions (2500 above sea level)
i think he recommended the spark plugs and fuel pump upgrade ....
All the same mods as the 4th gen 2.5l
You think I'll be able to fit the super charger to skyactiv g 1.5 mazda 2?
@@geripaksi no sir but you can do the basic modification to make it faster than a stock 2.0l
Ive got a great question. My 2021 skyactive G 2.5L NA has some lag. So when I push the throttle down I move forward but very slowly then it goes 2sec later. However this only happens when im not shifting the gears for it. I'm wondering if maybe its not down shifting from 2nd. Only happens when coming to a stop. What are your thoughts?
@ashtonbolletta2706 is it automatic? If so, try a transmission relearn. If that does work, I can tune it
@@supermazda3 yeah its an automatic. I did do a transmission relearn. seems like that didn't work. However its better when using sports mode. I have the 2.5l N/A awd system
@@supermazda3 what does your tuning services cost?
@@ashtonbolletta2706 email me at justin@g-sauce.com for details
What are your thoughts on the jb4 flex fuel kit?
@@mrluistito2529 it's great for monitoring your ethanol level
Does breaking the cat like shown in the video create turbulence because of the change in diameter?
More turbulence than a straight pipe but better from that with the cat still in. You have less refraction without the cat
what does upgrading spark plugs give?
Better heat dissipation at higher RPM
is there charcoal filter in 4th gen also?
@@DerickHo yes
@@supermazda3 where is it? i opened up the intake box, but it is not in there
If you are a turbo you don't have it
@@supermazda3 my is 2.0 na ...
@DerickHo might just be your country doesn't have strict emission regulations