Fisher F-PULSE Video Manual Setting Sensitivity and Alert Type

To adjust the alert response type and or sensitivity, start with the F-PULSE powered on.
Press and hold the button. Do not release the button at the power down jingle.
Wait approximately 2 minutes until you hear the program menu jingle. Then immediately release the button. You are now in the programming menu, the F-PULSE will not detect metal while in the Program Menu.
The LED will flash continually, once per second, to indicate the F-PULSE is in the program menu.
Quick press to advance to the next setting. There are six settings to choose from:
• LOW - BEEP + VIBRATE
• MED- BEEP + VIBRATE
• HIGH- BEEP + VIBRATE
• LOW - VIBRATE ONLY
• MED- BEEP + ONLY
• HIGH- BEEP + ONLY
Once at the desired setting, press and hold to save the setting and power off the F-PULSE.
The F-PULSE will remember your settings once powered on. Keep in mind that if the target alert is set to vibrate only, there will be no beep at power-on or power off.
The F-PULSE from Fisher Research Labs

[@benadam8435]

Thank you