Toyota Avensis 2.0 D4D T250, 2008 EGR cleaning

Поділитися
Вставка
  • Опубліковано 8 жов 2021
  • I did this video to demonstrate how easy it is to clean the ERG in a Toyota Avensis 2.0 D4D T25 2008, I used cheap and non destructive product to get it like new and remove a lot of carbon build up and it has greatly improved the power on the road 💥 hopefully this video can be of some help and it’s just a video to show how i do it and not a guide and do at your own Discretion, please give my video a like if you get some useful information and please subscribe
  • Авто та транспорт

КОМЕНТАРІ • 30

  • @SimonKerr1888
    @SimonKerr1888 2 роки тому +2

    Most thorough cleaning I've seen in these egr valve videos. Good job!

  • @michaelward5852
    @michaelward5852 10 місяців тому +1

    Really appreciate your time sir, fixed my Egr . Fuel economy is back and the dreaded limp mode gone

  • @mr.twomey2969
    @mr.twomey2969 2 роки тому +3

    Good video it helped me with my Toyota

  • @toonmag50
    @toonmag50 Рік тому +2

    Followed your video,but I couldn't uncouple the wiring cluster. I decided not to stress the connections and just cleaned as best as I could with the wires attached.
    Thank you and the cleaning seems to have reduced the amount of blue smoke on start up.

    • @boubalahcedric8190
      @boubalahcedric8190 10 місяців тому

      OK, je vous envoie une vidéo du comportement actuelle du moteur.

    • @toonmag50
      @toonmag50 10 місяців тому

      @@boubalahcedric8190 merci ,j'aimerais vois la video.

  • @macieksky
    @macieksky 2 роки тому

    Thanks this video saved my money

  • @kentrexborg9416
    @kentrexborg9416 3 місяці тому

    Good job!!

  • @OlavSunde-js9mt
    @OlavSunde-js9mt 2 місяці тому

    Eg søker etter bytte av partikelfilter , men finner bare dette ?

  • @DjMaxizone
    @DjMaxizone 6 місяців тому +1

    gaskets for replacement, can't you see that they are damaged?

  • @grahamkelly8299
    @grahamkelly8299 Рік тому

    Is it okay just to remove the 2 parts as done in this video to keep the egr light away or do I need to do the full job as done in your other video on the 2011 model

  • @pgbb22
    @pgbb22 2 роки тому +1

    Great detailed movie. BRAVO!
    do you have one for the intake manifold?
    thank you very much

    • @cardiyrepair
      @cardiyrepair  2 роки тому

      Thanks and i have one video for the full job intake manifold EGR removal and cleaning but it’s a T27 2011 model

  • @validraghici5295
    @validraghici5295 Рік тому

    hello sir. i have a question, the part where u used the vacuum cleaner, is a part of the admision ? i mean if a piece of carbon goes inside it will be straight into the admision?

  • @cipridobos7365
    @cipridobos7365 5 місяців тому

    Have you seen any improvement in how car behaves after EGR cleaning?

  • @rantzzzrantzzz2568
    @rantzzzrantzzz2568 9 місяців тому +1

    How was the mpg afterwards?

    • @cardiyrepair
      @cardiyrepair  9 місяців тому +1

      It was running nicely after the work was done and as far as I remember around 7/8 ltr per 100 km

  • @boubalahcedric8190
    @boubalahcedric8190 10 місяців тому +1

    bonjour , j'ai un gros problème avec ma T250 D4D le moteur tourne mais elle ne démarre pas. elle s'est arrêté toute seul en pleine route . comment faire ?

    • @cardiyrepair
      @cardiyrepair  10 місяців тому

      Bonjour mon ami, je suis désolé d'apprendre votre expérience, mais il m'est impossible de pouvoir diagnostiquer votre problème sans voir la voiture

    • @boubalahcedric8190
      @boubalahcedric8190 10 місяців тому

      @@cardiyrepair bonjour . Je viens de publier une vidéo du comportement du moteur en ce moment.

    • @boubalahcedric8190
      @boubalahcedric8190 10 місяців тому

      Bonsoir Cardyirepair. Je viens de publier une vidéo du comportement du moteur de ma T250.D4D .
      Elle est visible à ce titre : besoin d'une orientation pour ma T250....merci

  • @mohammadfirozrahmani8116
    @mohammadfirozrahmani8116 2 роки тому +1

    Hello sir way you cleening

    • @cardiyrepair
      @cardiyrepair  2 роки тому

      Oven foam cleaner great job, thanks for the comment

  • @DanieleMamelicoolestaura516
    @DanieleMamelicoolestaura516 Місяць тому

    Needs to be perfectly closed when clean?

    • @cardiyrepair
      @cardiyrepair  Місяць тому

      It must be tightened to 22nm as far as I remember it’s in the video, but don’t over tighten it as it’s steel into aluminium

    • @DanieleMamelicoolestaura516
      @DanieleMamelicoolestaura516 Місяць тому

      @@cardiyrepair I the actual valve inside the EGR, mine is a Little bit open, before and after cleaning

    • @DanieleMamelicoolestaura516
      @DanieleMamelicoolestaura516 Місяць тому

      I don't think it's normal

  • @SmorfSmorf
    @SmorfSmorf 6 місяців тому

    Just deactivate