Це відео не доступне.
Перепрошуємо.
How to Replace Front Brake Pads On a 2003 Polaris Sportsman 500 ATV-
Вставка
- Опубліковано 2 бер 2013
- Polaris Sportsman Brake Pads on Amazon - amzn.to/2NoRquE
Polaris Sportsman Brake Caliper on Amazon - amzn.to/2WR9yAg
Polaris Brake Master Cylinder on Amazon - amzn.to/34AVtcV
This video walks you through how to change the front brake pads on a Polaris Sportsman 500. I'm pretty sure these instructions will cover other years and models as well. Most four-wheelers will be a similar setup to this Polaris ATV. This video should give you a good idea of how to repair the front brakes on just about any four-wheeler or ATV.
Polaris Sportsman Brake Pads on Amazon - amzn.to/2NoRquE
Polaris Sportsman Brake Caliper on Amazon - amzn.to/2WR9yAg
Polaris Brake Master Cylinder on Amazon - amzn.to/34AVtcV
Click here to subscribe bit.ly/ngdysub1 and don't forget to select the notification bell!
Mark Jenkins is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
Disclaimer:
Due to factors beyond the control of Mark Jenkins, I cannot guarantee against improper use or unauthorized modifications of this information. Mark Jenkins assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Mark Jenkins recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Mark Jenkins, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Mark Jenkins.
Polaris Sportsman Brake Pads on Amazon - amzn.to/2NoRquE
Polaris Sportsman Brake Caliper on Amazon - amzn.to/2WR9yAg
Polaris Brake Master Cylinder on Amazon - amzn.to/34AVtcV
Thank you. Your videos have really helped me, and saved me a lot of time.
Perfect, just what I needed to know,...easy enough, but way better when you watch someone do it first.
Good video, thanks!
I just bought an oul Polaris and I find your video very informative. The camera work is very good and your are very good at explaining things. My bike was rode on the beach a lot and I have a very hard time with salt and rust, so every project is a chore. Very good video.
Thank you Mark for all your videos. You have helped out countless times!
Thanks so much for the video.....my 2000 Polaris is almost identical on the front pads. I'm not a mechanic at all and your videos have been awesome....not difficult tasks, but seeing it makes a huge difference.....keep them coming if you have any more Polaris vids outside of the ones already posted.
I look at my quad and kind of thought that's how u got it off good vid helped out a lot.
Good video I like watching it a lot. I never got into 4wheeling until I was older. We form a group of ATVers to build a new trail system. Without the internet we couldn’t have this far. Have awesome day :-)
Saved me a trip to the shop! Thanks man
The shop manual for the Xplorer 300 mentions something about a brake pad adjuster screw. It says to tighten it until the stationary pad makes contact with the rotor then back the screw off 1/2 turn. I can't seem to find this adjuster screw on mine. The only thing I can think of they are talking about is that Allen head plug that keeps one of the pins from moving. I replaced the pads on mine like you did and the brakes worked just fine.
The idiot I bought this bike off of had ran the pads down to nothing. The fingers on the front calipers had ate into the front rotors! The backing plates on the pads were paper thin and pretty much gone.
So I had to buy some used calipers and take them apart and clean them. I was too cheap to buy new ones. The rear brake pad was metal to metal but luckily it didn't get as far as the fronts. But the piston pushed the rotor back so far back against the transmission, I couldn't get the caliper back on with new pads. But it was an easy fix. I just took a pry bar and eventually the rotor popped back into it's original position.
Then my chain came off on the trail and had to have a buddy pull me back 10 miles with his side by side and I kept riding my brakes for fear I was going to slam into the back of him. So I need to pull the wheels off to check to see if I burned my brake pads up.
Great video and now easy to do even with little experience with this kind of stuff. Thanks!
Well done informative video!
Great video, thanks, it will help me do my brakes on my 99 Scrambler 500 4X4.
I have a question I cannot get the pads on at all matter how hard I try please help
Excellent video!
What about bleeding the brakes
good video! thanks alot
Great job Mark.
Hey Mark - Great video. Thanks. Not sure the link to the pads still works. Do you happen to have a good aftermarket pad suggestion? 2003 Sportsman 500. OEM pads for the front are $70.00. Thanks!
any pads work just fine i got mine off amazon
Do you have a video that shows how to remove a broken front bleeder screw.
good job saved me some time
are the front brake caliphers on the polaris 500 sportsman interchangable
you are awesome dude bro thank you! !
(2001 Sportsman 500 ho) I bought it recently and sometimes after it sits in park it wants to pull to the left, I just switched break pads, if it still keeps happening is there anything else i should try before switching out the caliper?
Where did you get the pads from i cant find them ? thanks for the help i have a 2012 if that helps any
I got a bit of a problem here ..... what if the Pistons wont come back up ? how can I make them come up ?
Awesome vid for front and back brakes. Thank. How about a change the belt vid next?
Love watching and learning off your video and also reading everyone's comments. Well done all around.
Kev.
I was wondering if you have ever done the rotors? I need pads and rotors now. I know how to do the pads but not the rotors. I can't find anywhere on the net how to do them.
Thanks for your video
Is this the same set up as an ltr 450 ?? Pls help lol
Very well done. I notice at the start, there's 3 screws of some sort on the hub of the all the wheels, Can you inform me as to what goes in there. Grease? Oil?
***** Thanks dude!
@@nogripes 4:00 o`clock or 8:00 o`clock....
i wish people would wash some of the crap off these things before they repair them.
why you not go to the quarter wash and get the mud off before you work on you atv
I put new pads on yesterday and my brakes are squeaking and are the rotors suppose to spin free???? Because mine are real hard to turn and my quad slows down buy it's self now I think maybe the caliper is sticking but I'm not sure can anybody help me out???
Mark Jenkins I don't think.. I was gonna lube the pistons to see if that does anything but idk
👌🏽👌🏽👌🏽