You can definitely tell you were a gear head at one time. A lot of nice tools. I remember the days of Radio Shack. Sure do miss those days. Keep up the good videos. I have learned a lot.
Radio Shack…great memories going in there with my Dad! Sears for Craftsman tools again with my Dad. He got a VA check for disability (WW2) and he would buy tools with it. He would take the time to teach me about tools. Right tool for the job! And clean your tools! He’s gone now but I still hear him now, Lol!
Radio Shack. Lol. Their slogan use to be "you got questions, we got answers" when the reality was" you got questions, we don't have a clue" nice home setup man
Got a similar metal tray for sockets, well over 20 years old, love it. Great for all drive sized impact sockets. Homak makes a good home shop toolbox. It's all about the tools that are in a box, to me? Can't go wrong with the Sunex impact sockets, got the 1/2" and 3/4" drive sets along with Mac and SK smaller sets. Nice setup, Dan.
Can attest to the desiccant! Always keep the small package that ships with a new tool bag or pouch, etc. keep them in every bag, every zipper pouch that has metal. Never thought to buy in bulk like that! It really does mess around and literally does exactly what it’s intended for! Great video!
I have the same box. Got it back in 2004. Still have it. Still in service at a union forklift shop, still stainless. I can’t put one magnet on there. I really wish I could though.
@Dan’s Pro Shop absolutely ...I'm sure there are going be haters saying daddy's money or what ever .... NOPE!! Dan is legit he worked hard for everything he got 👍🏻
I gotta say snap ons trigger system on there electric ratchet especially really come in handy in tight spots I wonder if Milwaukee can steal there design😂
thanks! my wife makes fun of me for that exact reason. when some one needs a tool i can call out the location with out hesitation. need a screw driver? top box, fourth drawer down, left hand side. lol, its so true!
I am not the only one that Has Bynford tools I am no longer alone my road chest is a Bynford .....hold it your Bynford is Fake how dare you Bynford is an all Canadian tool company making great tools and boxes lol great Video loved it
. The dessicants can be "recharged" by putting them in a warm-ish (about 150F) oven for an hour or so. It dries them out and they can go back to doing their job.
Nice Think we all have a Junk drawer. Real men like showing they work dirty hands lmao . And the Harley Spanner axel nut is for the 1 inch shaft only . Snap on is great for a Auto Tech I was maintenance I started buying Snap off $300 1/4 to 3/4 3/8 and 1 ratchet 3/8, 12 inch handle . Craftsmen 2500 piece set $500 1986 I think I broke 2 ratchets one in 1/2 and 3/8 was good enough for the stuff I did . Pumps turbine and impeller fluid transfer nothing high presser 4 inch pipe and flange . 1/4 to 1-1/2 and 24 inch pipe wrenches I had cheater pipes up to six foot long 1-1/2 and 2 inch . I still fix anything and I still have my Craftsmen tools from 1986 . I still buy what I need never have everything you need always something.
You can definitely tell you were a gear head at one time. A lot of nice tools. I remember the days of Radio Shack. Sure do miss those days. Keep up the good videos. I have learned a lot.
Thanks, I appreciate it!!
Radio Shack…great memories going in there with my Dad!
Sears for Craftsman tools again with my Dad. He got a VA check for disability (WW2) and he would buy tools with it. He would take the time to teach me about tools. Right tool for the job! And clean your tools! He’s gone now but I still hear him now, Lol!
I love how the Pack of Golds was in the pneumatics drawer.... how fitting haha
Radio Shack. Lol. Their slogan use to be "you got questions, we got answers" when the reality was" you got questions, we don't have a clue" nice home setup man
The Milwaukee M12 line is amazing
Repeat after me "WE DONT GET RID OF TOOLS... EVER" lol
Or G-u/n:s
@@akbychoice "boom sticks" 😉
You have so many great tools
Thanks 👍
The "Drawer of Thor" !!!! I like it !!! BTW, "Snap-Off" hammers are made by Trusty-Cook, if you want to save some fundage, next time around.....
Thanks for the info!
Definitely miss Sears and Radio Shack!
Good morning love the video,I'm learning so much.Blessings from Barbados
Good morning!
Got a similar metal tray for sockets, well over 20 years old, love it. Great for all drive sized impact sockets. Homak makes a good home shop toolbox. It's all about the tools that are in a box, to me? Can't go wrong with the Sunex impact sockets, got the 1/2" and 3/4" drive sets along with Mac and SK smaller sets. Nice setup, Dan.
Thanks!
Radio shack battery of the month card got me hooked on tinkering. No need to steal smoke detector 9 volts. Still the robotic arm.
RIP radio shack!
Wish i could have impact wrench for my job here as a motorcycle mechanic
Can attest to the desiccant! Always keep the small package that ships with a new tool bag or pouch, etc. keep them in every bag, every zipper pouch that has metal. Never thought to buy in bulk like that! It really does mess around and literally does exactly what it’s intended for! Great video!
Thanks so much!!
Handsome dude right there! 😍
I have the same box. Got it back in 2004. Still have it. Still in service at a union forklift shop, still stainless. I can’t put one magnet on there. I really wish I could though.
I remember when you got this box 👍🏻
Absolutely! You’ve been around my whole life you can testify to the internet that I’m not lying. Lol. I really have done all this stuff!
@Dan’s Pro Shop absolutely ...I'm sure there are going be haters saying daddy's money or what ever .... NOPE!! Dan is legit he worked hard for everything he got 👍🏻
I gotta say snap ons trigger system on there electric ratchet especially really come in handy in tight spots I wonder if Milwaukee can steal there design😂
You can’t beat the snap on locking flex heads the 1/2 and 3/8 almost never get time in the tool box.
Absolutely!!
Awesome vid. I can tell you are organized and hard working. Im sure if we blind folded you, you can find any tool even the 10mm. LOL
thanks! my wife makes fun of me for that exact reason. when some one needs a tool i can call out the location with out hesitation. need a screw driver? top box, fourth drawer down, left hand side. lol, its so true!
I am not the only one that Has Bynford tools I am no longer alone my road chest is a Bynford .....hold it your Bynford is Fake how dare you Bynford is an all Canadian tool company making great tools and boxes lol great Video loved it
.
The dessicants can be "recharged" by putting them in a warm-ish (about 150F) oven for an hour or so. It dries them out and they can go back to doing their job.
Awesome
It's just an assumption that twist-lock tray was developed to keep the 10 mm from running away
I loved radio shack. Folks don't build their own gadgets any more. We just buy Chinese junk from Walmart and Amazon.
Kiwico and a few others have stem building kits for kids now at least
I'd like to see your work box. As a Blow moulding mechanic I can't help but wonder what you have.
Tool box tour (part 1)
ua-cam.com/video/wHBzBaSyWwA/v-deo.html
Nice Think we all have a Junk drawer. Real men like showing they work dirty hands lmao . And the Harley Spanner axel nut is for the 1 inch shaft only . Snap on is great for a Auto Tech I was maintenance I started buying Snap off $300 1/4 to 3/4 3/8 and 1 ratchet 3/8, 12 inch handle . Craftsmen 2500 piece set $500 1986 I think I broke 2 ratchets one in 1/2 and 3/8 was good enough for the stuff I did . Pumps turbine and impeller fluid transfer nothing high presser 4 inch pipe and flange . 1/4 to 1-1/2 and 24 inch pipe wrenches I had cheater pipes up to six foot long 1-1/2 and 2 inch . I still fix anything and I still have my Craftsmen tools from 1986 . I still buy what I need never have everything you need always something.
Miss trader horn!!!
Where are you from?
SW PA
Not sure if you’ve heard, but the new craftsman factory in Texas is going to be shut down in 2024
When I'd part 2 coming?
Working on it…
Thank you I love your tool box tours
that's not stainless? nice set up btw
sadly no, magnets stick to it just fine. thanks!
@@dansproshop oh interesting. thanks for info
guess am not sleeping
sounds like you have a pennsylvania accent
Pittsburgh!!
@@dansproshop im from ALIQUIPPA but now live in florida
Posting at 5 am
That’s when I have time to.. lol