Great video. Had some issues this weekend as the rear belt intake design is piss poor to say the least. Question on the install. I only saw saw one hose under the handlebar shroud. Was the other one in there as well and I just couldn’t see it? Thanks in advance!
I’m confused… I got a 23 450 and my air intake stock tube goes right to the gas tank pretty high for stock but yours is now lower than mine..?😂 someone explain
Does you belt box still cool enough being closed in like that in ur Storage box .. seem like there may not be good air flow .. but like the idea May have to do my 570 soon
I haven't had any problems with it so far but that was and still is a valid concern. I debated 3d printing and installing smaller scale snorkel to install on the box lid just for airflow but still haven't. I can say tho i am very mean to my system and have not had a belt problem
Could always vent the rear belt heat up the back somehow. Got a buddy that went up under the rear rack through in to a storage seat. And it even heats his spare gloves in winter :)
How far have you gone after install? I have had issues with wet belt on my 21 570 also. I worry if I'll have enough air flow but I'm in the process of doing the same thing. Except I wasn't going to do the top of the air box cause I don't plan on sinking it but tackling 18 inches of water I hope to not have a problem like in the past.
@huntenbambi bubba I can't decide what fucking exhaust to get on my 570 without having to do to much. Im.looking for just exhaust. So many videos and to choose from????
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
Great idea and setup !! All I would do myself is paint all the hoses black
My stock 23 trail air intake is higher than what you snorkeled lol
Thank you for making this video I did the same thing on my Polaris sportsmen 450 works great I did do the air box
Glad it helped
That’s a great option for sure
Great info, I need the same thing.....Are you using 1.5" hose and 2" PVC Fittings with silicone caulk?
Great video. Had some issues this weekend as the rear belt intake design is piss poor to say the least. Question on the install. I only saw saw one hose under the handlebar shroud. Was the other one in there as well and I just couldn’t see it? Thanks in advance!
Yeah both ran up under there.
I’m confused… I got a 23 450 and my air intake stock tube goes right to the gas tank pretty high for stock but yours is now lower than mine..?😂 someone explain
Can you list the parts that you used to make your kit?
What are those fittings in the box that attach your belt hoses?
Can you make a video on doing it?
Sorry for the late response but I can do a more in depth video when i tear down
Do you have a link from where you purchased the intake plate?
Where did you buy just the warrior plate for the air box? I can't find just the plate...
Does you belt box still cool enough being closed in like that in ur Storage box .. seem like there may not be good air flow .. but like the idea May have to do my 570 soon
I haven't had any problems with it so far but that was and still is a valid concern. I debated 3d printing and installing smaller scale snorkel to install on the box lid just for airflow but still haven't. I can say tho i am very mean to my system and have not had a belt problem
Could always vent the rear belt heat up the back somehow. Got a buddy that went up under the rear rack through in to a storage seat. And it even heats his spare gloves in winter :)
So the threads are the same on 3/4 shank ball? Cause I gotta do the same to mine! Lol
How far have you gone after install? I have had issues with wet belt on my 21 570 also. I worry if I'll have enough air flow but I'm in the process of doing the same thing. Except I wasn't going to do the top of the air box cause I don't plan on sinking it but tackling 18 inches of water I hope to not have a problem like in the past.
I have done probably a few hundred miles on this setup and at least two service cycles. No issues on the belt/clutch side.
Can you send me the link for the Warriors play that will be helpful because I cannot find it. Thank you so much.
If you find that could you send it to me too lol
I mean the warrior plate adapter plez
Did you do anything with the vent lines or electrical? Trying to do the same with mine,
I ran new vents up to the bars since the back vent went to the frame which wasn't sealed and dielectric greased an the connections
The CVT intake and exhaust being right next to each other like that in an almost near airtight box doesn't overheat your CVT box?
I was concerned about that but no i haven't had any issues with it for the year or so it's been on.
@@huntenbambi I would really like to do this to my 2023 570...Any updates on heating problem "Are you having any" with your CVT Box / Belt?
Is that just a regular PVC 90 on the hose from back of belt box?
Yeah, I used a rubber reducing coupler with a sch 40 pvc
Why does the air box need 2 hoses?
I assume to make enough airflow to not choke out the engine. I bought the warrior plate which came as two pipes.
Did you silicone the lid on your air box?
No, my factory seal was actually decent.
@@huntenbambi sweet
Bro my 23 looks just like yours. Makes menwonder lol if mines a 2023😂😂
Probably damn close, Polaris four wheelers don't tend to change much across the years.
@huntenbambi bubba I can't decide what fucking exhaust to get on my 570 without having to do to much. Im.looking for just exhaust. So many videos and to choose from????
Can you post a link to that warrior plate?
www.snorkelyouratv.com/product-page/sya-1-1-2-dual-intake-warrior-plate
What size sauna hose ?
I believe 1 in.