you must to replace the wiring harness, the twisted wires are canbus wires. later can cause diagnostic / function problems. if you want the best possible results pick up a good undamaged harness🍻🍻🍻🍻🍻 and dont forget the motor lift
Hello, I've been following you from Vietnam, and I really admire the way you create videos about refurbishing motorcycles involved in accidents. However, I have a small suggestion: consider designing a frame to stabilize the front part of the bike, while using a motorcycle front stand to support the balance of the rear part. This frame would replace the wooden blocks you currently use under the engine block, providing a safer solution for you. Wishing you all the best and continued success!
new viewer here, ur videos are awesome. we might have diff belief, but i like how u remind all ppl with positive quotes(from bible i guess) at the end. keep up the good job man, u r awesome as ur videos.
Welcome irsyad! Thank you for your kind words! I really like how you don't instantly relate you and I as enemies just based on a difference in religion. Although we may disgree God says to show love to all people. Thank you man, this was a great reminder to me, cheers
Can't believe you have that 3 bike in one garage,and i see the honda box 😏, that's gonna be next video and will complete the bike 😍. You're so talented,keep your great work man,i will waiting for the next video. Love from Indonesia ✌️
New subscriber here, from Canary Islands, i love to see this kind of videos cause i did the same with my panigale :) Just past feelings ! now im enjoying my bike since 1 month Good luck and continue with this videos
Yes everything ur doing is awsome to save a bikes life an to watch it happen is great but pls pls give us a price on ur rebuild we are wanting to know if it ends up cheaper then an show room bought bike thanks again cant wait till next video Opi. Lol
Really great bikes, and good joob fixing the bikes. One Thing through, how do you check the alingment of the frames? Havent seen Any footage of how you assure the intregrity of the frame. The Damage on the BMW front fork was substantial.. But thanks for the videos and keep up the good work.. 😊👍
Thank you Michael! I don't have a local shop or any methods myself on checking the alignments on these frames. That is something I should look into for the future. Currently I'm just using my best judgment and my eye balls to assess the damage and make a call based on what I can see. From what I've read, These frames are very tough and can handle a lot before shifting. Yeah it was unfortunate that the forks had damage, they were pricey but they needed replacement. Absolutely sir and thank you for your words of encouragement!
Love your videos but I just can't imagine how it is economically viable considering the initial purchase price of the bike + the parts or assembly you buy to replace the damaged ones without attempting to repair them. Few years ago my insurance had to pay close to half of the MSRP of my MT09 just to replace a swingarm and few cosmetics parts damaged in an accident.
Its pretty horrible! honestly almost everyone doesn't trust a rebuilt title on a motorcycle which is 10x more dangerous, I hope to show people the structural integrity of these beasts through these videos.
Hey dean, so I purchase these bikes from salvage yards that sell automobiles or motorcycles that have been wrecked. In the states here we have multiple salavage yards in every state so lots of places to chose cars and bikes from of all shapes and sizes
@@CJMediaOfficial ok perfect I'm happy for you come on and good luck if it continues like this at the end of the month and finished and you've been working on it for a month around?
man it's really worth it ? bc a brand new it's 21K ... so i don't know realy well how much u pay that . but add these part u pay ( and don't do yourself ) usure or you're tool and time spending on that . and after that u need to be expertise before use them ...
Ur vibe and the vid’s vibe in general is soo chill. Subbed 🔥
Beyond happy to hear that JM! Cheers to you man
Man you are living the dream! Stay blessed 🙏
you must to replace the wiring harness, the twisted wires are canbus wires. later can cause diagnostic / function problems. if you want the best possible results pick up a good undamaged harness🍻🍻🍻🍻🍻 and dont forget the motor lift
I’m addicted to these videos! Thank you 🙏🏼
Very happy to hear Saeeed! Cheers
The vids are carefully put. Together like them bikes
Really nicely done videos
I appreciate that! Thank you
Hello, I've been following you from Vietnam, and I really admire the way you create videos about refurbishing motorcycles involved in accidents. However, I have a small suggestion: consider designing a frame to stabilize the front part of the bike, while using a motorcycle front stand to support the balance of the rear part. This frame would replace the wooden blocks you currently use under the engine block, providing a safer solution for you. Wishing you all the best and continued success!
Loving this build, I subscribed on part 1, now I can't wait for part 3.
Glad to hear gary! Thank you
great video, I want to try this myself but it's so intimidating.
Such complex systems.
new viewer here, ur videos are awesome.
we might have diff belief, but i like how u remind all ppl with positive quotes(from bible i guess) at the end.
keep up the good job man, u r awesome as ur videos.
Welcome irsyad! Thank you for your kind words! I really like how you don't instantly relate you and I as enemies just based on a difference in religion. Although we may disgree God says to show love to all people. Thank you man, this was a great reminder to me, cheers
Great video as always!! 👏🏻👏🏻👏🏻👍
This dude should have more subscriber's
Thank you very much for making your knowledge available.
Glad you enjoyed!
Great job bro, best of luck
Can't believe you have that 3 bike in one garage,and i see the honda box 😏, that's gonna be next video and will complete the bike 😍. You're so talented,keep your great work man,i will waiting for the next video. Love from Indonesia ✌️
Haha yes will, that Honda box has some key components for my CBR! Thanks a lot man! Cheers! 🇮🇩
@@CJMediaOfficial nice
New sub so working through your vids such a cool channel and the s1000rr is my favourite bike hope to add one to my garage one day love from the uk 🇬🇧
Cheers mate! The S1000RR is my fav too! Hope you get to add one to your garage!!
New subscriber here, from Canary Islands, i love to see this kind of videos cause i did the same with my panigale :)
Just past feelings ! now im enjoying my bike since 1 month
Good luck and continue with this videos
So cool to hear Carlos! Will do and thank you
Praise the Lord..!! It's rare to see people give thanks to Lord our God.
Subscribed buddy..!!
Amen! Cheers
Hallelujah 🙏
Always killing it bro
Appreciate it Omar!
You don’t need the big Allen wrench for the front axle. You can just use the pinch bolts. It does help to have the tool but it’s not necessary.
Watching you tear down these bikes makes them look less intimidating in person haha. Great video!
Happy to hear it Kris! Ty Cheers
New subscriber here all the way from HK, really love your channel bro 😎
Please keep it coming… much love and god bless.
Thank you! You have given me more "motovation" cheers and God bless you as well!
New subscriber here love the videos! Would love e to see a price breakdown of a finished one!
Absolutely! Thanks man!
4:08 what product is the one you used to repair the insulating sheath of the wires?
Hi woder, it's called liquid electrical tape
The frame is not bend?
big fan from nepal 🇳🇵
Greetings man
Can't wait for the next one 👍👊😊
Coming right up Paul! 👊
TOTALLY enjoying ur work, its therapuetic..at least for me!!!
Haha thanks amazing! Glad to hear
The best brother
I like your Smile bro😊 keep it up ✌️
Thanks! Glad to spread the positivity
Good stuff bro loving the bikes man
Much appreciated brotha! Looking forward to next weekend
Good job 😊👍🏻
Yo some cool monsters right there mehn
Beasts!
Awesome bro great video, best wishes
Thanks momo! As always God bless!
@@CJMediaOfficial Amen
Those kids of bikes that you rebuild will be the reason why you are growing big in YT keep the great work going brother 👍🏽
Cheers Rayan! I loves these types of bikes! They have a special place in my heart!
News subscriber from Malaysia ✌️
Appreciate it azhar!! 🇲🇾 cheers
Yes everything ur doing is awsome to save a bikes life an to watch it happen is great but pls pls give us a price on ur rebuild we are wanting to know if it ends up cheaper then an show room bought bike thanks again cant wait till next video Opi. Lol
Of course Justin! Thank you!
Uma série muito top. Parabéns 👍🇵🇹
aplausos senhor! obrigado e saudações 🇵🇹
Love the content! 🇱🇰
Cheers Shermal!
Really great bikes, and good joob fixing the bikes.
One Thing through, how do you check the alingment of the frames? Havent seen Any footage of how you assure the intregrity of the frame.
The Damage on the BMW front fork was substantial..
But thanks for the videos and keep up the good work.. 😊👍
Thank you Michael! I don't have a local shop or any methods myself on checking the alignments on these frames. That is something I should look into for the future.
Currently I'm just using my best judgment and my eye balls to assess the damage and make a call based on what I can see. From what I've read, These frames are very tough and can handle a lot before shifting.
Yeah it was unfortunate that the forks had damage, they were pricey but they needed replacement.
Absolutely sir and thank you for your words of encouragement!
Me llenas de orgullo amigo es increíble lo que ases cuídate mucho
Invest in a Bursig center stand. Will make life a lot easier. Plus, it obvious money isn’t the concern in these rebuilds. Where in WI ru based?
Love your videos but I just can't imagine how it is economically viable considering the initial purchase price of the bike + the parts or assembly you buy to replace the damaged ones without attempting to repair them.
Few years ago my insurance had to pay close to half of the MSRP of my MT09 just to replace a swingarm and few cosmetics parts damaged in an accident.
Expensive content 🤗👍 like it
Amen bro!
You're doing great 👍Just curious where did you did your apprenticeship in fixing motorcycles?
Cheers guna! No apprenticeship, just hands on learning by myself, tons of fun!
Awesome job dude. From these 3 beast, which one do you like the most?
Honestly behrouz, this BMW is my favorite so far. Even tho I havnt even heard/rode it yet! Thanks man! Cheers
The black substance apparently used to eliminate the bare copper wire showing, can you provide the particulars for that mystery goooo?
😂 it's liquid electrical tape, once applied it dries sealing off the exposed copper area!
I’ve been doing Copart shenanigans for a while but never with bikes, how well does a rebuilt/salvage title bike sell?
Its pretty horrible! honestly almost everyone doesn't trust a rebuilt title on a motorcycle which is 10x more dangerous, I hope to show people the structural integrity of these beasts through these videos.
I would love to tackle something like this. I don't have a workshop though.
Don't necessarily need a workshop, I'm just fortunate to have a space to work in!
how much did you pay for bike and all spare parts its not better to buy other bike for that money? :D
Lol you're right Ivan. I didn't get a profit
Hi. What do you gonna do the damage parts? The dent inverted fork might I need to my electric bike project. Are you planning to sale them?
I will mostly likely put them up on eBay, I'll let you know when I do!
Hello friend, do you still have the pieces that you managed to replace?
Hi Fernando! I sure do, intersted?
Hey, I was just wondering how you get all these cool modern bikes wrecked all the time?
Hey dean, so I purchase these bikes from salvage yards that sell automobiles or motorcycles that have been wrecked. In the states here we have multiple salavage yards in every state so lots of places to chose cars and bikes from of all shapes and sizes
@@CJMediaOfficial oh perfect! Thank you, I live in ny so I’ll take a look and see!
first..😊😊.i like watching video bro..
Cheers!!
Shout out sir from phillipines nice 👍
Cheers mark! Greetings
wow how in part did you buy
unused front shock, I really need it. very far to get to Indonesia 😭😭
I might be putting those parts on eBay soon!
This is a great restoration! But the background music is too loud.
Cheers! I'll work on making sure the audio levels are the same!
Work mode on.....😃😃
That's right! 😁
How long does it normally take for body work to come in ?
A few weeks on average
@@CJMediaOfficial man my GSXR750 been waiting on body work since April !!
Sukses selalu Bang, salam saya dari Indonesia🙏
Salam untukmu temanku!
What did you use to solder the wires?
Hi Kay! It's a soder and heat shrink tube that once heated up heats the sodder hot enough and the heat shrink in one go
Nice bike idol =)
good I like the work you do compliments.
did you find all the parts for bmw?
Thank you! I have yet to find a few pieces yet, but I have the majority so far!
@@CJMediaOfficial I can't see the time the BMW is very nice.I have just finished a Ducati and a ktm, see mine….!!! Grade bravoooooo
@@CJMediaOfficial ok perfect I'm happy for you come on and good luck if it continues like this at the end of the month and finished and you've been working on it for a month around?
@@passione2ruote107 probably 2-3 months for the bike to be rolling around and completed
@@CJMediaOfficial good in a short time it takes time to arrive the packages you order
no video today
Iam from india 🇮🇳 love your efforts your video came randomly on my UA-cam wall,i would like to know how old are you
Cheers Yash, greetings to you 🇮🇳
Is the insurance high on bikes with a salvage title?
From my understanding the insurance is the same on a clean title bike to a slavage title bike.
@@CJMediaOfficial thanks
Wow,nice your superb,❤️❤️
😁thank you
Can t wait to see waht u will do with that ingniton …
Thanks klenky! Im excited to show y'all
awesome
Hello may i know where can i order parts like yours?
Парень, мне нравица твоя работа!👍🏻
Спасибо, сэр! на каком велосипеде ты ездишь?
@@CJMediaOfficial привет.мой байк Cbr600.
my dream is super bike 🥰🥰🥰
Keep working towards your dream!
will you make a profit on this?, with all those ordered parts seems quite impossible.
Probably not, but you can't buy experience so that's worth it for me
@@CJMediaOfficial it is for sure, great content 👍
Buying new or used parts for this project?
Both BC! Finding good deals in both areas!
Where did you buy your parts
BMW motorad and Ebay! I did a cost breakdown with my sources for parts later on in the series!
Where you order body work from ?
eBay
why the hell honda box came out for bmws1krr parts
Jesus. That parts list must be a fortune. How much was it total?
Total price is to come in the future!
May I buy old shocks?
Sure email me at cjmedia.connect@gmail.com
good👍 ❤
❤️❤️
👍👍👍👍
man it's really worth it ? bc a brand new it's 21K ... so i don't know realy well how much u pay that . but add these part u pay ( and don't do yourself ) usure or you're tool and time spending on that . and after that u need to be expertise before use them ...
Parabéns pelo trabalho....isso não é pra qualquer um
Obrigado senhor! Sim, é desafiador, mas muito possível para qualquer um experimentar! Saúde José
Waoo BMW
Time to invest in a motorcycle lift
Eventually Heriberto🤣 I've made it this far I'm starting to wonder if it's worth it anymore lolol
Brasil 😅
Hey cj What is the paint you use for the dark gray blackish subframes?
You mentioned it a few times in a couple vids. Thanks!
Hey mate, it's Black trim spray paint by SEM found on eBay. Real common and works great
🏍💯💯💯👍👌
Panigale is the best.
Haha Carlos! The panigale is such a good looking bike
Cj has no soul.
님 영상 보는 사람인데요
한국말로 번역 안되나요?
🤘❤🇮🇳👏❤❤
✌
The frame behind of bmws is weak !!
Haha well they are designed to be strong from the top down holding 2 people, but pressure from the side turns it into a coke can
you really need to work on your music it's really irritating
I’m happy to take any non copyright options you may have Peter! I’m just working with what I’ve got
Does the bike run on gas or petrol or diesel Americans need to speak proper English
❤️🩹🔥
Hey, i'm from Portugal and i like your videos!
Can you send me One stiker of your Chanel UA-cam?
Grande abraço!!
Hi Ricardo! I have no stickers for the Channel unfortunately! Thank you sir and greetings to you in Portugal!
@@CJMediaOfficial ok, no problem! Sorry my english, it's só bad!🙏😥
Greetings!!✌️✌️💪
hi hello
Do you have IG or facebook?
Yes my IG is c.j.media
Your smill sooo gud