Meant to say literature. Guess when your 6 whisky’s deep you miss spell. But so glad you where here to help. Can’t find much on the internet about them.
@@dannylane8888 Try manualslib.com for the user and service manuals. You can look up motor diagrams and part numbers on crowley.com and boats.net. And can also get support from the community on forums.iboats.com. Those folks are great.
No. That was just a boat I was working on. The hatch is for a Trophy 2002. I don't have that boat posted to UA-cam. But it's the boat that this motor is on. ua-cam.com/video/hX2lZeJMVT8/v-deo.html
On these Johnsons everything up to the intake manifold in the fuel delivery system is plastic and I found many of the parts were warped creating vacuum leaks. I replaced two bowls that were pretty far gone and then used a heat gun to true up the mating surfaces. That helped quite a but. I also retimed them which helped with idle. Timing is tricky on these Johnsons because they have the quickstart feature so they have to be timed without starting the motor.
OK, well it looks like the starboard engine is only turning up around 2000RPM, unless the tach is wrong.
Thanks for watching and commenting. The starboard tach was bad.
Man I got a 2000 sea pro but a 18ft, do you know where to find any literater on these boats?
What's a literater?
Is it a device that makes you literate?
Meant to say literature. Guess when your 6 whisky’s deep you miss spell. But so glad you where here to help. Can’t find much on the internet about them.
@@dannylane8888 Try manualslib.com for the user and service manuals. You can look up motor diagrams and part numbers on crowley.com and boats.net. And can also get support from the community on forums.iboats.com. Those folks are great.
Thanks DC, I appreciate it.
That’s not the boat you need that hatch for is it
No. That was just a boat I was working on. The hatch is for a Trophy 2002. I don't have that boat posted to UA-cam. But it's the boat that this motor is on.
ua-cam.com/video/hX2lZeJMVT8/v-deo.html
So what was the resolution to the fuel delivery issue??
On these Johnsons everything up to the intake manifold in the fuel delivery system is plastic and I found many of the parts were warped creating vacuum leaks. I replaced two bowls that were pretty far gone and then used a heat gun to true up the mating surfaces. That helped quite a but. I also retimed them which helped with idle. Timing is tricky on these Johnsons because they have the quickstart feature so they have to be timed without starting the motor.
ua-cam.com/video/3uUujMjEaLU/v-deo.html