2019 Mustang Steeda H pipe install & sound
Вставка
- Опубліковано 24 тра 2020
- This is a video showing me installing a steeda h pipe on to my 2019 Mustang 5.0 also sound clips after install.
Breaking Down by Groove Bakery | groovebakery.com
Music promoted by www.free-stock-music.com
Attribution-NoDerivatives 4.0 International (CC BY-ND 4.0)
creativecommons.org/licenses/... - Фільми й анімація
Sweet sound. Just got my Steeda H pipe today, was on back order since end of May.
Wow that's a good minute!!! Mine took weeks
Just ordered a Steeda H pipe last night. Should have it in a week hopefully. My Roush axle-back exhaust is loud already, this is gonna make it crazy. And this is for my wifes '19 GT convertible.
Nice!!! Yea gives a really good sound. I'll be adding one to my 2022 mustang when it arrives.
I have the Steeda Axle Back. Love the sound. No drone. Quiet while crusing and loud at half and full throttle. You can hear it approx mile away. I live in the woods/back roads. . Thinking about adding an H Pipe.
The h pipe gives a deep sound over raspy which is why I went with the h pipe. Yea I wanted the steeda axle back cause they sound good but went with outlaws instead.
Woah woah woah.. hell yeah! Sounds amazing. 🤟🏻
Thank you! That was only part of the exhaust. Hopefully the rest should be here this week.
Nice job bro I just order the steeda h pipe
If your looking for the deep muscle car tone. Great choice man!!! It sounds very good.
Great video. Thanks!
Thanks man! No problem! I have other vids on the channel as I add more to the exhaust.i now have a full exhaust setup. Sub for more content.
5.0PRIM.0, great video. I just bought a 2020 GT and I’m going to be installing a Steeda H-Pipe this week. I just wanted to confirm that you place the H Pipe mid-way on the front Stock clamps and then make the marks to cut the tail pipes, as I don’t want to remove the tail pipes. Thank you.
That is correct. The front you use stock clamps and for the rear make the marks and cut the end of the resonator and use clamps provided.
5.0PRIM.0, thank you for the reply. It’s very much appreciated.
Mine came in 2 days :)
Is it possible to use a pipe expander so the rear section of the h pipe slips inside the axle back pipes for a less exhaust leak?
You might be able to. If that's the case might as well get a muffler shop to weld it.
So the rear pipes do not insert into the rear of the H pipe? When you cut them they just fit flush and the clamps create a seal?
Correct. Same with the front.
Sounds great
Thank you. I just installed the axle back setup. Its louder now 😬😬😬.
5.0PRIM.0 which one did you get?
@@QueTheChaotic flowmaster outlaws
Hey primo quick question how hard is it to just weld it in the back section towards the mufflers. Cuz im planning to do that. Any advice would be appreciated. Thank you
Shouldn't be hard just remove the exhaust from the back hangers so it can drop some to give you a better angle. But have like a trans jack still supporting. If doing on the floor might be a bit more tough.
Sounds good man! Solid video. Going to do a louder one later?
Thanks man! Well I went with a flowmaster outlaw along with this. I got a vid posted on the channel. It's crazy loud so dont really need a different setup. Although corsa did come out with a double h pipe. Curious how that sounds. But I'll do long tubes before switching to another exhaust setup.
They are expensive! My brother wants the corsa double helix one but with long tubes it's like 3-4k lol
Corsa crazy expensive!
Eh primo, did you get the H pipe that has compatibility with the heat shields or the one where you need to cut off the heat shields?
The h pipe I got I didn't have to do anything to the heat shields but once I installed my axle back then I had to remove the heat shields.
@@primofx2sport any problems after removing the heat shields?
@@onymaru8658 nope none.
@@primofx2sport thanks bro
@@onymaru8658 yessir hope u subbed!
How much to do this
Steeda is the only company i found whos H pipe is 304 SS which is way better form then other company 409 SS it'll be my first mod on my 2020
Great choice. The h pipe sound is awesome!
why is 304 better than 409? dont know the difference can you please tell me
Triple A it’s just a higher grade SS. It’ll last much longer
Big Ed thanks man
I wonder if it would be raspy like that with the active exhaust?
No because with the active exhaust the exhaust is able to open up more. The restrictions on the non active exhaust is what makes it sound raspy but the h pipe gives it that deep tone. It will sound good on active. I have another vid on the channel with flowmaster outlaws axle back.
The base exhaust sounds much better.
@@wade998 i had to go aftermarket being boosted. There was way too much restriction from the stock exhaust.
Why does that h-pipe sound more raspy than deep?
Because of the stock mufflers non active exhaust. Too much restriction. If would been active exhaust it would sounded way better! Ended up putting a flowmaster outlaw axle back and the tone was deep over raspy.
Sounds like an X pipe
Sounds more like an X pipe for some reason.
It's because the stock mufflers are still present so there's rasp at higher rpm. It doesn't sound anything like that now with my flowmaster outlaw axle back. I'll be doing my catless longtubes this weekend so I should have a video of that up soon.
what’s the reason behind all the rasp is it a x pipe or just the camera
Really its the stock mufflers. Its a h pipe that was installed and it give a deep tone but with the stock mufflers it still has restrictions. The restriction is what causes the rasp once it gets into higher rpms. If you watch my other vid I got rid of the stock mufflers and installed a axle back. It got rid of the rasp. Its just a deep tone now because I went with flowmaster outlaws.
Sloppy work.
Cut and swap 🤷♂️. No leaks.
Nope, 😳 I don’t like sloppy work..